Used Automatic Lathe for sale (26,939)

Condition: used, Year of construction: 1994, functionality: limited functionality, spindle bore: 42 mm, spindle speed (max.): 4,000 rpm, spindle motor power: 7,500 W, The machine is in continuous operation, producing hydraulic fittings from hexagonal 22 (automatic steel). It is a very rigid and efficient machine for simple components. The machine is equipped with a FETTE tangential thread cutting attachment. Two such machines are available; one is additionally fitted with a side drilling unit and a thread milling attachment with a large set of milling cutters. Both machines come with a large set of tool holders and collets. Price for both machines is negotiable. Chodpexq Rz Dsfx Afljf

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Chsdpfx Afoin Ub Tjljf Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: good (used), Year of construction: 1984, Thomann EED 20 Automatic Bar Lathe For square and flat bars Capacity range: 6-20 mm Flat steel: 10/3-30/10 mm Csdpfx Afswbglielehf Turning length: 25-900 mm Technical specifications Length: 1200 mm Width: 660 mm Height (without base): 350 mm Height (with base): 1150 mm Weight (without base): 120 kg Voltage: 380 V Motor power: 0.75 kW Rotation speed: 7 rpm

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 211S, rotational speed (max.): 3,000 rpm, bar diameter (max.): 65 mm, collet bore: 150 mm, TECHNICAL DETAILS Max. bar capacity: 65 mm Front spindle bearing diameter: 110/150 mm Collet clamping system up to Ø: 60 mm HAINBUCH collet system up to Ø: 65 mm Maximum spindle speed: 3,000 rpm Main spindle motor power: 11/15 kW Cjdpfxowtq U Ee Aflehf Main Spindle Number of tools: 8 VDI-30 Maximum working stroke in Z: 50 mm Rapid traverse speed: 15 m/min Feed force: 6,790 N Cross Slide Number of horizontal slides: 2 Maximum working stroke at X1/X2: 70 mm Feed force at X1/X2: 8,000 at 50 bar Maximum working stroke on Z1: 230 mm Turret Number of tools: 8 VDI-20 Vertical Slide Number of vertical slides: 2 Maximum working stroke at X3/X4: 70 mm Manual length adjustment: 50 mm Rapid traverse speed: 15 m/min Feed force at X1/X2: 8,000 at 50 bar MACHINE DETAILS Machine height: 1,700 mm Footprint: 2,900 x 1,700 mm Machine weight: 4,100 kg Voltage: 380 V Frequency: 50 Hz Power: 22 kVA

Year of construction: 2002, condition: ready for operation (used), Main spindle: turning diameter: 33mm, speed: 8000rpm, power: 7.5kW. Slide 1: travel X/Y/Z: 320mm/50mm/255mm, rapid traverse X/Y/Z: 30m/min, tool stations: 5. Slide 2: travel X2/Z2: 165mm/200mm, rapid traverse: 30m/min, tool station: turret, tool stations: 8, driven tools: 8. Coolant volume: 400l, pump capacity: 80l/min. Machine dimensions X/Y/Z: approx. 2500mm/1550mm/1750mm, control: Fanuc Series 16i-T. Documentation available. On-site inspection is possible. Cjdpeu T Rirofx Aflohf

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Year of manufacture 2014 with IEMCA Boss 332 Type 32C bar feeder, YOM 2014 Büchele chip flushing system Reinforced oil pump (special accessory) including spindle flushing Chodpjw Tkcujfx Aflof Signal lamp High-pressure preparation front and rear included Bearings on the pick-off spindle are new (company Star, invoices available) The machine is still in operation and can be inspected by appointment. Used machines are sold without warranty.

Condition: used, Year of construction: 2002, turning diameter 16 mm spindle passage 16 mm turning length 160 mm control GE FANUC Series 18 i-T spindle turning speed range 8000 U/min rapid traverse 30 m/min total power requirement 2,2 kW weight of the machine ca. 2,1 t Accessories: bar loader IEMCA, GENIUS 226-32 L, YOM 2002 (for bar dia. 2 - 26 mm and bar lengths 1500 - 3210 mm); chip conveyor, Chedpfxovh I Tvj Aflsf coolant

Condition: not inspected (used), Diedesheim HPI 12262 lathe fine automatic lathe -KOM 1027- Offered here is a fine automatic lathe from the company Diedesheim. Technical data: Manufacturer: Diedesheim Model: HPI 12262 Weight: 2.800kg Chjdpfxshg S U Ss Afljf Operating voltage/frequency: 380V 50Hz Control voltage: 220V Magnetic voltage: 24V= Rated current of the machine: 16A Fuse of the supply line: 50A

Condition: used, Year of construction: 1995, turning diameter over bed 50 mm spindle passage 26 mm turning length 275 mm total power requirement 12 kW weight of the machine ca. 4500 kg Chsdpfx Ast Hwp Tsflsf CNC-Sliding Headstock Lathe, Opposite Headstock

Year of construction: 1996, condition: used, Schütte SF 26S DNT YOM 1996 Number of spindles: 6 Max bar diameter [mm]: 26 Auto bar loader: Cucchi BLT Multi-6 - (YOM 2015) Chjdpfoi Hb Szjx Afljf Cross slide pos. 1, 3, 4, 6 CN slide pos 2, 5 Spindle stop attachment for main spindles Bar feeding pos. 6 Pickup spindle pos. 6 High pressure coolant system Chip conveyor, hinged belt type Oil mist filter ISI RON/A 2500A, ID 26295

Condition: excellent (used), Year of construction: 2014, CNC-swiss type automatic lathe brand: STAR type: SV-38R new in: 2014 equipped with: FANUC 31i control, turret with B, Y, X, and Z axis, driven tools, 2x C-axis, Y2 axis, subspindle, high pressure pump, oil mist, backworking, chip conveyor, parts conveyor, fire extinguishing system, Chedpevgulvjfx Afljf useable for short and long parts automatic bar loader FMB TURBO 5-55

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: K00447, Citizen K16 VIP – Swiss-Type CNC Sliding Headstock Lathe General Information: • Year of manufacture: 11/2006 • Serial number: K00447 • Manufacturer: Citizen Machinery Co., Ltd. (Miyota Nagano, Japan) • Machine weight: 1,950 kg Overall Dimensions: • Width: 1,610 mm • Depth: 1,850 mm • Height: 1,050 mm Technical Specifications: • Max. bar diameter: 16 mm • Max. turning length: 200 mm • Main spindle speed: 15,000 rpm (2.2 / 3.7 kW) • Sub-spindle speed: 10,000 rpm (0.55 / 1.1 kW) • Control: Fanuc Series 31i • Number of axes: X1, Y1, Z1, Z2, C1, C2 • Full C-axis on both spindles • 20 bar high-pressure pump, dual channel Tooling Configuration: Front Tool Post: • T1–T5 – stationary tools • T11–T14 – driven tools (radial or axial) Tool Holder Block: • T21–T24 – stationary tools for main spindle operations • T31–T34 – stationary tools for sub-spindle operations Equipment Included: • IEMCA Genius 118 Type 37 LL bar feeder (year 2007, serial no. 020704BA02) • Set of guide bushings for machine and bar feeder • Turning tool holders and driven tool holders Chedpfexl Tl Iox Aflsf • Automatic fire extinguisher (fire protection system with activation sensor) • 20 bar high-pressure pump / 2 channels Technical Condition: The machine is in very good technical condition, fully operational and ready for immediate use. Regularly serviced and used in precision manufacturing. Additional Information: • Nameplate: model K16 VIP, serial no. K00447, year of manufacture 11/2006, weight 1,950 kg. • Machine can be demonstrated under power.

Condition: used, Year of construction: 1998, number of spindles 6 spindle passage 27 mm turning length 59 mm hexagon material 24 mm square material 18 mm cross slide travel 36 mm longitudinal slide travel 85 mm spindle turning speed range 366 - 5020 U/min max. torque 95 Nm control INDEX total power requirement 20 kW - 6 cross slides - 6 longitudinal slides - polygon device - thread cutting device - hydr. tapping device - workpiece removal belt - bar loading magazine PIETRO CUCCHI, model AN-BN Accessories: various tool holders, various collets, chip conveyor, Chjdpfx Afjvh Naqjlof coolant

Condition: excellent (used), Year of construction: 2017, operating hours: 2,138 h, functionality: fully functional, machine/vehicle number: 8107000122B, rotational speed (max.): 8,500 rpm, feed length X-axis: 70 mm, feed length Y-axis: 405 mm, feed length Z-axis: 100 mm, bar diameter (max.): 32 mm, No reserve price - guaranteed sale at the highest bid! New price: €215,000 TECHNICAL DETAILS CNC control type: Fanuc 32i-B Number of spindles (C-axes): 2 Number of axes: 5 Number of channels: 2 Main spindle data Maximum bar capacity: 32 mm Draw tube bore: 38 mm Maximum speed: 8,500 rpm Torque (S2 15 min / S1): 51.9 / 40.4 Nm Power (S2 15 min / S1): 7.5 / 5.5 kW Counter spindle data Maximum bar capacity: 32 mm Draw tube bore: 38 mm Maximum speed: 8,500 rpm Torque (S2 30 min / S1): 23.6 / 14 Nm Power (S2 30 min / S1): 3.7 / 2.2 kW Axis Data X1/Y1/Z1 Travel X1/Y1/Z1 (with rotary spindle): 70 / 405 / 100 (240) mm Maximum Speed X1/Y1/Z1: 40 / 30 / 40 m/min Maximum Acceleration X1/Y1/Z1: 5 m/s² Nominal Thrust (S1) X1/Y1/Z1: 2,200 / 4,400 / 2,200 N Axis Data X2 / Y2 / Z2 Travel X2 / Y2 / Z2: 300 / 135 / 200 mm Maximum Speed X2 / Y2 / Z2: 40 / 30 / 40 m/min Maximum Acceleration X2 / Y2 / Z2: 5 m/s² Nominal thrust (S1) X2 / Y2 / Z2: 2,200 N Toolholder data for slide 1 Number of fixed tools for internal machining: 4 + 4 Toolholder diameter: 25 mm Number of fixed tools for external machining: 6 Toolholder system: 16 x 16 mm Number of driven tools: 4 Collet type: ESX20 Max. speed of driven tools (GEO 7-9): max. 4,000 rpm Nominal torque (S3 40% / S1): 5.25 / 4.5 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Max. speed of driven tools (GEO 8-10): max. 6,000 rpm Nominal torque (S3 40% / S1): 3.5 / 3 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Toolholder data for slide 2 Number of fixed tools for internal machining: 4 Toolholder diameter: 25 mm Number of driven tools: 4 Collet type: ESX20 Max. speed of driven tools (GEO 8-9-10-11): max. 6,000 rpm Nominal torque (S3 40% / S1): 3.5 / 3 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Toolholder data for counter spindle slide Number of fixed tools for internal machining: 2 Toolholder diameter: 25 mm Lubrication system data Capacity: 1.8 L Operating pressure: 20 bar Downtime: 7 min Operating time: 30 s Lubricant: ENI EXIDIA HG 68 Pneumatic Unit Specifications Min. operating pressure: 5 bar Max. operating pressure: 6 bar Consumption of base machine: 180 NL/min Chsdov Stutjpfx Aflof MACHINE DETAILS Dimensions: 2,309 x 1,448 x 2,087 mm Connected load: 16 kVA Weight: 3,450 kg Noise level: 75 dB(A) On-time: 3,743 h Spindle hours: 2,138 h EQUIPMENT - With 32 x 3000 mm bar feeder - Various channels for bar feeders - High-pressure system - Conversion kit for fixed lathe - Various collets, guide bushings, and tools

Condition: used, Year of construction: 1990, turning diameter 60 mm turning length 200 mm Chedpjt Hw Atefx Aflsf number of slides total power requirement 20 kW weight of the machine ca. t dimensions of the machine ca. m

Condition: good (used), Year of construction: 2003, functionality: fully functional, spindle motor power: 2,200 W, turning diameter over cross slide: 16 mm, spindle speed (max.): 9,000 rpm, spindle speed (min.): 500 rpm, turning diameter: 16 mm, overall weight: 1,700 kg, Star SA16 RC Swiss-Type Lathe with C-Axis and FMB turbo 2-16/3200A Bar Loader, Very Good Condition Swiss-Type Lathe with C-Axis and Bar Loader, Very Good Condition Model: SA 16-R (with C-Axis) STAR MICRONICS Control: CNC (Fanuc 18i-TB) (6 axes) Country of Origin: Japan With Bar Loader: FMB turbo 2-16/3200A 3m Bar Capacity Max. Machining Diameter: 16 mm Max. Drilling Capacity: 7 mm (9/32 inch) Max. Tapping Capacity: M6 Rapid Traverse in X/Y/Z/ZB: 20/20/20 m/min A: 78.5 m/min Turn. Feed in X/Y/Z/ZB: 10/10/10 m/min A: 10 m/min Main spindle speed: 500...12000 rpm Power, main spindle at 100/40% duty cycle Usage: 2.2 kW Number of tools: 6 Driven tool stations: 3 Rear-side machining unit Max. clamping diameter Clamping diameter: 16 mm Max. workpiece length: 85 mm Spindle speed: 500...8000 rpm Spindle drive: 0.55 kW Max. drilling capacity: 4 mm Max. tapping capacity: M3 Weight: 1.7 t Dimensions: 2163 x 770 x 1650 mm Equipment: C-axis Work light Hydraulic unit Coolant system Compressed air system Central lubrication Door guard Cedpfewbr Ngjx Aflshf 4-spindle drill head

Condition: good (used), Year of construction: 2007, Manufacturer: STAR Type: SR-10JC Year of manufacture: 2007 with: FANUC 18i-TB control, rear machining, synchronous spindle, powered tools, Codpewnn N Njfx Aflohf C-axis, bar feeder magazine FMB micromag

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: K00446, General data: • Year of manufacture: 11/2006 • Serial number: K00446 • Manufacturer: Citizen Machinery Co., Ltd. (Miyota Nagano, Japan) • Machine weight: 1,950 kg Overall dimensions: • Width: 1,610 mm • Depth: 1,850 mm • Height: 1,050 mm Technical specifications: • Max. bar diameter: 16 mm • Max. turning length: 200 mm • Main spindle speed: 15,000 rpm (2.2 / 3.7 kW) • Sub-spindle speed: 10,000 rpm (0.55 / 1.1 kW) • Control: Fanuc Series 31i • Number of axes: X1, Y1, Z1, Z2, C1, C2 • Full C axis on both spindles • High-pressure pump 20 bar, 2-channel Tool configuration: Front tool post: • T1–T5 – fixed tools Cjdexl Tkqepfx Aflehf • T11–T14 – driven tools (radial or axial) Tool holder: • T21–T24 – fixed tools for main spindle • T31–T34 – fixed tools for sub-spindle Equipment: • IEMCA Genius 118 Type 37 LL bar feeder (year of manufacture 2007, serial no. 020704BA04) • Guide bushings (complete set) • Fixed and driven tooling • High-pressure pump 20 bar / 2 channels Technical condition: The machine is in very good technical condition, fully functional and ready for operation. Regularly serviced and used in precision production. Additional information: • Nameplate: type K16 VIP, serial no. K00446, production date 11/2006, weight 1,950 kg. • Possibility of machine demonstration under power.

Condition: excellent (used), Year of construction: 2014, DMG Mori MSL 60/7 CNC lathe Chedexptyaepfx Aflsf Control: Fanuc 31i Year of manufacture: 2013 Main spindle: Spindle speed: 5,000 rpm Spindle bore: 65 mm Bar capacity: 60 mm Sub spindle: Spindle speed: 5,000 rpm Turning diameter: 42 mm Axis travels: X1 / X2 / X3 travel: 60 mm X4 travel: 130 mm Z2 travel: 80 mm Z3 travel: 80 mm Z4 travel: 340 mm Total weight: 3,500 kg Chip conveyor IEMCA bar feeder Radially driven tooling Driven drilling and milling unit 4-position basic turret on slide 3 Drilling and milling unit Axially driven unit

Condition: ready for operation (used), functionality: fully functional, Machine has drilling / threading unit fitted on It is included barfeeder. Codexz R Ilopfx Aflehf

Condition: good (used), Year of construction: 2010, Manufacturer: STAR Type: SR-10JC Year of manufacture: 2007 with: FANUC 18i-TB control, backside machining, synchronous spindle, Csdpfx Afswnnzxjlohf powered tools, C-axis, oil mist extraction, FMB micromag bar loading magazine

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: P10243, Citizen CINCOM M12 – Swiss-Type Sliding Headstock Lathe Year of manufacture (machine): 2000 Year of manufacture (bar feeder): 2009 Chjdpfjxl Tigjx Aflsf Technical Data: • Max. bar diameter: 12 mm • Max. turning length: 200 mm • Main spindle speed: 12,000 rpm • Spindle power: 2.2 kW • Number of axes: X1, Y1, Z1, X2, Z2, X3, Z3, C1, C2 • Control: CNC Cincom / Mitsubishi M6 • Full C-axis on both spindles Tool Configuration: Gang tool post: • T1–T5 – fixed tools • T6–T8 – driven tools (holders included) Turret: • T20–T29 – fixed or driven tools, multiple tools per station possible • No driven tool holders currently installed on the turret Backspindle tool post: • T41–T43 – fixed tools, no possibility of mounting driven tools Equipment: • LNS Express 332 bar feeder (year 2009) • Guide bushes • Set of static and driven tool holders Technical Condition: The machine is in very good technical condition, recently serviced, fully operational, and ready for commissioning. Additional Information: • Nameplate: Citizen Watch Co., Ltd., type M-12, no. M212/0257, weight 2,580 kg, S/N P10243. • Complete technical documentation and the possibility to demonstrate the machine under power.

Condition: good (used), Year of construction: 1988, 6-spindle-automatic lathe Codjvwmb Dopfx Aflshf brand: TORNOS type: SAS16 new in: 1988 equipped with: sub spindel threading attachement flushing system chip conveyor automatic baroader IEMCA PRA 40/31/P

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: P10037, Citizen CINCOM M12 – Swiss-type Sliding Headstock Automatic Lathe Machine year of manufacture: 1999 Bar feeder year of manufacture: 2009 Technical Data: • Max. bar diameter: 12 mm • Max. turning length: 200 mm • Main spindle speed: 12,000 rpm • Spindle power: 2.2 kW • Number of axes: X1, Y1, Z1, X2, Z2, X3, Z3, C1, C2 • CNC control: Cincom / Mitsubishi M6 • Full C-axis on both main and sub spindle Tool Configuration: Gang Tool Post: • T1–T5 – fixed tools • T6–T8 – driven tools (holders included) Turret: • T20–T29 – fixed or driven tools (more than one tool can be mounted per station) • No driven tool holders for the turret Backspindle Tool Post: • T41–T43 – fixed tools only, no provision for driven tools Equipment: • LNS Tryton 112 bar feeder • Guide bushes • Set of fixed and driven tool holders Technical Condition: Machine in very good condition, mechanically and electrically fully functional, ready for operation. Additional Information: Chedpfx Afexlqq Iolsf • Machine can be demonstrated under power. • Complete technical documentation available.

Condition: good (used), Year of construction: 1982, 6-spindle-automatic lathe brand: TORNOS Chedpfevwmcuex Aflsf type: AS14 new in: 1982 equipped with: sub spindel threading attachement flushing system chip conveyor automatic baroader IEMCA PRA 40/31/P