Used Bandsaw Resaw for sale (550)

Condition: used, Year of construction: 1973, machine/vehicle number: 20591, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine Type: Bandsaw Design: Sturdy cast iron construction Machine Weight: approx. 1.5 t Working Area Roll Diameter: 500 mm Overhang: 1,050 mm Workpiece Height: 400 mm Work Table Table Size: 750 × 800 mm Fedpj Aaz Spjfx Aanopp Table Tilt: ±40° Cutting Speed Cutting Speed Stage 1: 15–79 m/min Cutting Speed Stage 2: 67–305 m/min Cutting Speed Stage 3: 207–940 m/min Cutting Speed Stage 4: 2,350 m/min Drive Variator Drive: infinitely adjustable Gear Stages: 4 Electrical Data Operating Voltage: 400 V Total Power Requirement: 5.5 kW Dimensions Space Required: approx. 2.4 × 1.0 × 2.2 m EQUIPMENT Band Tensioning Device Tiltable Work Table Rear Auxiliary Table Various Saw Band Guides Saw Band Grinding Device Work Light Foot Switch Accessories

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Fpodpfe Adtyysx Aanop TECHNICAL DETAILS GENERAL DATA Manufacturer: SAMUR Type: S-1000 Machine number: 186 Machine type: Metal bandsaw PERFORMANCE DATA Speed: 9–336 rpm WORK TABLE Table dimensions: 610 × 610 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,700 mm Width: 660 mm Height: 1,800 mm Weight: 500 kg EQUIPMENT Welded band device

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Kölle Type: ERSO Machine Type: Bandsaw Work Table Table Dimensions: 600 x 560 mm Table Groove: 1 MACHINE DETAILS Dimensions and Weight Length: 1,000 mm Width: 700 mm Height: 1,800 mm Fodpfx Aj Ad H Dloanepp Weight: 300 kg

Condition: used, Year of construction: 1977, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Fpjdps Aaz Nbefx Aanjp Machine type: fully automatic bandsaw machine Machine weight: approx. 1.2 t Cutting Range Cutting diameter: 250 mm Saw blade length: 450 mm Cutting speed: 50 / 70 / 100 / 135 strokes/min Performance Data Total power requirement: 3.8 kW Dimensions Length: 2.6 m Width: 1.8 m Height: 1.1 m EQUIPMENT Fully automatic operation

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, power: 15 kW (20.39 HP), total height: 2,300 mm, total length: 1,500 mm, total width: 900 mm, overall weight: 1,500 kg, table height: 955 mm, Equipment: CE marking, documentation/manual, motor brake, Vertical band saw / resaw Manufacturer: Stenner Type: ST 9 Heavy-duty vertical band saw for resawing and trimming of squared timber, planks, and boards Typical applications: sawmill, timber trade, carpentry, pallet manufacturing, planing mill Saw blade and rollers: Diameter of saw blade rollers: 915 mm Saw blade width: 100 mm Minimum saw blade length: 5280 mm Maximum saw blade length: 5380 mm Cutting performance: Maximum wood width: 370 mm Maximum cutting width (standard): 230 mm Maximum distance from saw line to fence: 305 mm Fence swivels 0 – 35° Drive and feed: Motor: 15 kW (optional equipment) Feed rate: variable, 7.5 – 30 m/min Dust extraction: Dust extraction port diameter: 150 mm Extraction volume: 1455 m³/h Dimensions and weight: Fjdpfx Ajz Eigfeanepp Working height: 955 mm Dimensions (approx.): 1500 x 900 x 2300 mm (L x W x H) Machine weight (approx.): 1500 kg Basic concept: - Vertical band saw for resawing and trimming of solid wood - Fence swivels 0 – 35° for bevel and wedge cuts - Feed rate can be adjusted variably from 7.5 to 30 m/min - Saw blade rollers 915 mm, saw blade width up to 100 mm - Wood type: softwood / hardwood

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 400 mm, saw band length: 5,550 mm, saw band width: 80 mm, table length: 800 mm, table width: 1,060 mm, working height: 400 mm, - Italian manufacture - Lamella band saw - Unpainted - Very good condition - Used saw Band Saw: - Wheel diameter: 800 mm - Max. blade width: 80 mm - Max. cutting height: 400 mm - Main drive motor: 11 kW - Feed speed range: 2–40 m/min - Feed system with pneumatic pressure to the guide - Metal slip-in feed roller - Blade length: 5550 mm - Throat (blade-to-frame distance): 780 mm - Screw-type blade tensioning - Table size: 1060x800 mm - Tilting worktable: up to 15° - Extraction port diameter: 120 mm - Blade lubrication system - Foot brake - Cast wheels - Star/Delta starting Fodpfx Aajw H Rq Honspp - Power supply: 380V - Dimensions (LxWxH): 1600x1100x2400 mm - Weight: 860 kg Feed Unit: - Metal, toothed, drive roller - Five feed speeds, selectable by belt adjustment - Roller height: 30 mm - Feed motor: 0.75 kW - Pressure system

Condition: new, Technische Daten: fly wheel DM 800 mm Fedpoby U Dpsfx Aanjpp Max. cutting height 400 mm Max. max cutting width 780 mm tabel dimensions 580 x 810 mm tildable table 15 Grad Max. saw blade dimension 80 x 0,8 mm saw blade length 5380 - 5530 mm motor 11,0 kW, 400 V, 50 Hz suction 2 x 100 mm fly wheel speed 680 U/ min suction DM 1 x DM 100 mm & 2 x DM 120 mm compressed air 6 - 8 bar machine weight: ca. 850 kg machine dimensions L x B X H 1550 x 950 x 2500 mm welded steel structure, fully closed pneumatic brake table in cast iron upper & lower saw blade guide star triangle switch emergency push button telescopic saw blade guard/ guide work table tillable 20 deg. saw blade cooling/ cleaning device with diesel tank saw blade tension indicator cleaning brush for fly wheels solid work piece fence cast iron fly wheels motor circuit protection switch CE CENTAURO Model RVP200 feeder roller height 160 mm work piece fence with rollers height 160 mm var. feed speed 1 - 21 m/ min pneumatic opening / closing of feeder Max distance saw blade - feeder approx 220 mm Max. distance saw blade - work piece fenceapprox . 200 mm CE

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Pegas 500 X 750 Horizontal X-NC 2000 Automatic Bandsaw- Year 2016 500mm Diameter Tube / 400mm Diameter Solid Bar. 750mm x 480mm Sections. +/- 45 and 60 Degrees. Fpodsz Hfftjpfx Aanjp 4000mm Feeder arm.

Condition: good (used), Year of construction: 2006, functionality: fully functional, 5 HEAD STENNER MHS9 HORIZONTAL RE SAW LINE. This complete 5 head line comes with 12 metre infeed and 8 metre outfeed. The line has 2 deburring station at the front and rear. Tilting heads which are ideal for Feather Edge board production 915MM diameter wheels Max width blade 100MM Saw speed 35M/S Max width timber 305/450MM Max height 305MM Main motors 5x 18.5KW Variable feed speed 15-60M/MIN Also if required we have a Systems TM rotary auto stacker which is avaliable at extra cost All five heads have new upgraded power feed wheels with sprockets, chain tension rollers and alloy blade guides for improved faster production. All guards have new sawdust exhaust outlets for added fire protection. The line has power boards and control boxes. Comes with 80% of orginal dust extraction trunking and operator cross over steps. All additions/improvements costing over 20k GBP. Comes with blades. This is a serious piece of equipment for large volume production and it is uncommon for a such machinery to come onto the market for sale. Fpsdpfezwh Hwsx Aanop To be collected by customer from site Northamptonshire UK. Crane lorry essential Offers in excess of £80,000 GBP

Condition: excellent (used), Complete high-performance planing line with WACO 6-head planer, double resaw bandsaw, full mechanization, moisture measurement, control system, etc. Truly complete! Capacity approx. 2,500–4,500 m3 per month and shift, depending on dimensions. Fjdpfx Ajykmixjanjpp

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Fedpfx Aaovuhumonjpp Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: used, A compact but robustly built industrial level free standing resaw. Variable feed speeds Suitable for softwoods and hardwoods Quick, simple and safe to operate Feeding system / general capacity. RVP 200 variable speed feed system Steel feed rollers 200mm dia. Variable feed speed 0 - 30 mt/min speed. Max. feed roller to blade clearance 200mm. Max. fence to blade clearance 200mm. Main saw Dia. of saw pulleys 800mm. Max. cutting height 400mm. Max. blade width 80 x 0.8mm. Fpedszx D Umepfx Aanop Max. / Min blade length 5530 / 5380mm. Height of the table from the floor 950mm. Table size 1060 x 8000mm. Automatic star-delta starter. Automatic pneumatic braking of wheels. Safety micro-switch to doors. Front infeed support rollers with emergency protection cable. Tilting table 15 dergrees. Telescopic blade guard. CHACO blade guide on the table. Rackwork. Dust scrapers on wheels. Steel saw blade ready for use. Extraction points x 2 - 100 and 120mm dia. Working air pressure 6 to 8 bar.

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, cutting angle (max.): 30 °, machine/vehicle number: M3378, For sale: large band saw for soft materials. Fpsdszfwfxepfx Aanop Outreach: 1.25 m, allowing you to cut through material up to 2.5 m wide. Cutting height: approx. 90 cm. Cutting length: approx. 2.3 m. The upper part can be tilted electrically to the left and right up to 30 degrees, making this a special sawing machine. Well-maintained machine with few operating hours. Fecken Kirfel – German quality. Installation and adjustment can be arranged upon request.

Condition: good (used), machine/vehicle number: Stenner Resaw Bandrack, functionality: fully functional, total height: 2,350 mm, total length: 5,410 mm, total width: 1,700 mm, table height: 1,100 mm, Equipment: motor brake, Good working condition and ready to use. Solid, reliable machine ideal for sawmill. Please get in touch via my mobile, if you require any further information or would like to arrange a viewing. Fodpfszrpauex Aanopp Can be seen working or please view it on the YouTube Link

Condition: used, Year of construction: 1988, 105 twinband linear pm for upto 300mm round logs 4mtr length, this is a complete round to finish sawing system, breaking round logs down to return and resaw everything to a finished product, high production and minimum waste Fsdpfxjm Rhfdo Aanjpp

Condition: excellent (used), Danobat CP 1211T Large Capacity Horizontal Bandsaw (1999) Year 1999 Fpodpfoz N Awmjx Aanjp Condition Used Serial Number 03994700 Stock Number 2138 Type CP 12.11 T Round Cutting Capacity 1100mm Rectangle Cutting Capacity 1200mm x 1100mm Table Height 785mm Wheel Size 1200mm Saw Band Speeds 1-77 m/min Band Tension 400L Machine Dimensions 7000mm x 8500mm 3650mm Swarf Conveyor Manual & Automatic Cycles

Condition: used, Pulley Diameter 700mm Max sawblade width 35mm Table size 980mm x 700mm Max blade length 5120mm Table Tilting 0 to 35 degrees Throat capacity 600mm Max. Cutting height 350mm Adjustable rip fence 4 Hp motor and starter Fpodpezd Uuhofx Aansp Weight 435kg

Condition: used, Year of construction: 1980, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: CMS- MI, cutting length (max.): 6,000 mm, year of last overhaul: 2023, Equipment: cabin, documentation/manual, scorer, We are offering for sale our BonGioanni brand band sawmill. It features complete control systems, an operator cabin, log storage, infeed conveyors, and transport tracks. Wheel diameter: 1300 mm Wheel width: 170 mm Fpsdo Ad Ur Rjpfx Aanep Log carriage length: 4300 mm Distance between log clamping claws: 1710 and 830 mm Motor power: 55 kW Log splitting saw.

Condition: like new (used), Year of construction: 2012, If you have any questions or require further information, please do not hesitate to send us a message or call us. Fsdps Ahmzvsfx Aanepp

Condition: used, Pulley Diameter 700mm Max sawblade width 40mm Table size 765mm x 1000mm Table Tilting 0 to 35 degrees Fsdjwl H Daepfx Aanopp Throat capacity 680mm Max. Cutting height 485mm Adjustable rip fence 4 Hp motor and starter DC brake Serial number 80210

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Horizontal thin-cutting band saw 400 mm working width New 2024 model with bigger wheels and inverters on wheels. Touchscreen Schneider, PLC and Inverters Schneider Germany 22.0 KW saw motor Fjdpe Ahidkefx Aanjpp Bigger wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm

Condition: good (used), Year of construction: 2004, functionality: fully functional, Paul resawing and multi-blade circular saw BM 160. Cutting height 160 mm. Throughfeed width 750 mm. Reinforced hydraulic feed, infinitely adjustable from 0 - 85 m/min. Roller pressure amplification. Triple anti-kickback device. Fjde Aitibepfx Aanjpp Saw arbor 550 NSP. Safety device. 45 kW motor mounted. Electrical control cabinet. Has been out of operation for several years.

Condition: used, total height: 1,500 mm, total length: 2,150 mm, total width: 1,750 mm, Year of manufacture: 2014 Colour: White Empty weight: 800 kg - Year: 2014 - Documentation available: Yes - CE marking present: Yes - Serial number: 2400611132F - Drive system: CNC - Saw type: Automatic - Horizontal/vertical: Horizontal - Mitre cutting available: Yes - └ Round cutting capacity at 45° [mm]: 190 - Round cutting capacity [mm]: 240 Fedpfxj Ai Dnzs Aanepp - Power [kW]: 6.6 - Saw blade length [mm]: 2980 - Saw blade width [mm]: 27 - Saw blade thickness [mm]: 0.9 - Max. feed length [mm]: 3200 - Workpiece clamping: Hydraulic - Options: Automatic infeed, Digital readout - Transport dimensions: 2150mm x 1750mm x 1500mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2026, Flexible horizontal band resaw with tiltable conveyor Modern resaw with impressive features : Fpodpfx Aae Ahidconep Cast iron dynamicly balanced wheels Hydraulic blade tension Inverter controlled feed system Automatic pressurised lubrication system with reservoir tank External control panel 22.0 KW motor - latest IE-3 energy efficient motor Tilting conveyor up to 45 degrees * very suitable for shiplap cladding, wall cladding * Maximum material size (W X H): 300mm x 300mm Feed speed (variable): 0~18 m/min same as new

Condition: used, Metal-cutting bandsaw Manufacturer: Mössner Type: Rekord Technical data: Saw blade speeds: 12–750 m/min Condition: used Fedj Ai T Tgepfx Aanopp Accessories, tools, and clamping devices shown are included in the scope of delivery only if this is explicitly stated in the additional information. Subject to modifications, errors in technical data and specifications, and prior sale!