Used Beer for sale (292)

Condition: used, maximum load weight: 31,883 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2015, next inspection (TÜV): 08/2023, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,960 mm, loading space volume: 100 m³, total width: 2,550 mm, total height: 3,950 mm, Year of construction: 2015, Equipment: ABS, * Schmitz SpeedCurtain on both sides * Certified according to VDI2700 and DIN EN 12642 Code XL * Beverage certificate * Draught beer certificate * Liftable roof Fsdpfjk Aufbsx Aanepp * 4 rows of cargo securing * 30 cargo securing points * Portal doors at the rear * Fully air-suspended * Disc brakes * ABS

Condition: used, Year of construction: 1992, Overview This O+H / KHS Hansacan can filler, blocked with a Ferrum can seamer, is a rotary can filling and seaming monoblock for beverage cans. Filler and seamer are joined as a single unit, so cans run from filling straight through to seaming in one continuous flow. The block is set up for standard 330 ml cans (can type 211 / 202) and reaches a rated output of approximately 20,000 cans per hour, depending on product and filling temperature. The block was previously in production in a commercial brewery filling 330 ml cans and is currently at the workshop undergoing a complete reconditioning before delivery. Filling parameters and production data are managed via a Siemens SIMATIC touch HMI, with machine control on a Siemens S7 PLC. Technical data Fodpfx Ajzlqu Heanjpp - Manufacturer: O+H / KHS - Model: Hansacan can filler - Seamer: Ferrum can seamer, F 505 G - Year of manufacture: filler 1992, seamer 2010 - Machine type: rotary can filler and seamer monoblock - Filling valves: approx. 30 (type Hansacan) - Seaming heads: 5 - Capacity: approx. 20,000 cph at 0.33 L (product- and temperature-dependent) - Can format: 330 ml standard cans, can type 211 / 202 - Products: beer, carbonated beverages - Control: Siemens S7 PLC with Siemens SIMATIC touch HMI Equipment - Filler and seamer supplied as one blocked unit - New electrical panel with Siemens S7 PLC and SIMATIC touch HMI (reconditioning scope) - New pneumatic panel with renewed pneumatic valves (reconditioning scope) - Beer regulating valve ahead of the beer inlet, CIP tulips and CO₂ injection before seaming - Set up for can type 211 / 202, 330 ml - Manuals, spare-part list and electrical documentation for filler and seamer (provided with the machine) - CE declaration to be issued on completion of reconditioning Condition Used - currently undergoing a complete reconditioning at the workshop and to be delivered fully overhauled, supplied as a blocked filler and seamer unit. The reconditioning scope and the CE declaration are committed as part of the sale and are not yet complete. The block was previously in production in a commercial brewery filling 330 ml cans. Availability On request, after completion of the reconditioning. Location and firm delivery date on request.

Condition: used, Year of construction: 2004, operating hours: 28,000 h, machine/vehicle number: TP117, Technical Specifications & Performance Data The Used Tetra Cap Applicator TCA45 is a robust, single-head cap application unit from Tetra Pak®, engineered for reliable operation in beverage production environments and seamless integration within a used bottling line. Purpose-built for continuous industrial packaging, it offers steady output with precise cap application after filling and before packing. Manufacturer: Tetra Pak® Model: TCA 45 TETRA PACK Year of manufacture: 2004 Nominal speed: up to 7,500 bricks/hour No. of heads: 1 Cap type: OEM code 4 (per manufacturer specification) Rotation direction: OEM code 0 (per manufacturer specification) Category: Capping Machine / Cap Applicator Placement: downstream Tetra Pak filling, upstream final packaging Container compatibility: Tetra Pack bricks with appropriate change parts Typical products: water, juice, beer, wine, and other still beverages Documentation: manuals available Safety: integrated safety features included Fsdpfx Aasyhblvonjpp Advanced Automation & Control Systems Designed around an industrial PLC with a user-friendly HMI, the TCA45 facilitates stable, repeatable cap application. Recipe-based settings support format recall, and process alarms help operators maintain consistent performance. Torque control, cap presence verification, and fault diagnostics contribute to cap quality and minimize rework in high-speed beverage production. PLC/HMI control for straightforward operation and monitoring Automatic fault detection with guided troubleshooting Integration-ready I/O for upstream filling and downstream packing synchronization Electrical: built for standard industrial power supplies (details per manual) Machine guarding with interlocked access doors and emergency stop circuits Production Line Integration Capabilities This cap applicator is well-suited to second hand or newly engineered used bottling line projects. It interfaces efficiently with infeed/outfeed conveyors, bottle orienters, fillers, and labelers, ensuring balanced line flow and minimal downtime. Compatible with Tetra pak fillers. Communication-ready for line control and buffer management Machine Condition & Maintenance History The unit is currently under maintenance, undergoing inspection and service to verify core functions and safety systems. Wear components are being checked and adjusted as needed to align with expected performance at up to 7,500 bricks/hour. OEM manuals are available to support commissioning, operation, and preventive maintenance schedules. Operational Performance & Versatility Optimized for consistent, high-quality capping, the TCA45 supports a broad mix of beverage formats common in industrial packaging. With suitable change parts, it can handle PET and glass bottles as well as aluminum containers, making it versatile for diversified production runs. Suitable applications: water, juice, beer, wine, functional drinks, and similar beverages Stable cap application to support product integrity and shelf-life Gentle handling...

Condition: used, Year of construction: 2017, Overview Complete automatic canning line for beer by American Beer Equipment (ABE), built around the LINCAN 35 inline can filler and seamer. The line runs from the can depalletizer through the twister rinser, atmospheric filling and lid seaming to the air knife dryer. It is fully operational, with maintenance up to date and the latest software installed. Technical data - Year of manufacture: 2017 (LINCAN 35) - Capacity: rated 35 cans/min on 0.33 L cans; about 1,500 cans/h in production - Can formats: 0.33 L and 0.44 L in use; compatible with 0.355, 0.375, 0.5 and 0.568 L cans - Filling: atmospheric, for beer at about 3 °C, CO2 purge of each can before filling - Utilities: compressed air at 100 psi (approx. 7 bar), CO2 at 60 psi (approx. 4 bar) - Cleaning: CIP function started from the HMI - Control: touchscreen HMI with daily, weekly, monthly and lifetime can counters - Construction: stainless steel Scope of Delivery - Can depalletizer | Norland | YELLOW JACKET | for aluminium cans up to 24 oz, pallets 56 x 44 in with tier sheets, approx. 340 kg, footprint approx. 2.7 x 2.7 m with conveyor, height approx. 3.5 m - Twister rinser | inclined can twister with rinsing - Atmospheric can filler | LINCAN 35 | 7 inline filling nozzles with level probes, CO2 purge - Can seamer | LINCAN 35 | seaming unit upgraded, retaining bar added on the lid feed - Drying unit | air knife on the discharge conveyor - Documentation | operator manuals, printed and PDF Condition Fully operational and in very good condition, inspected in production. Maintenance up to date, software updated, seaming and lid feed improved. Fpedpfx Ajz Hziujanep Availability Immediately. Location: Spain.

Condition: used, Year of construction: 2019, Overview Complete craft-beer bottling line for 0.33 L glass bottles, currently in operation. The heart of the line is an ABE GLASSPAK 66 automatic rotary isobaric monobloc that rinses, fills, crowns and post-rinses up to 4,000 bottles/h. A layer depalletizer feeds the filler; a linear labeller with lot coder, an accumulation table and a case sealer complete the end of line. Technical data - Product: beer, glass bottles - Capacity: up to 4,000 bottles/h at 0.33 L - Filling: isobaric (counter-pressure), 18 filling valves - Closure: 26 mm crown caps - Filler electrical supply: 380-415 V, 3-phase, 50 Hz - Year of manufacture (filler): 2019 Scope of Delivery - Bottle depalletizer | Cordero Maquinaria | layer depalletizer with overhead sweep frame, electric hoist and bottle infeed table, 400 V, 50 Hz - Isobaric filling monobloc | ABE | GLASSPAK 66 | inverting pre-rinser, vacuum and CO2 purge, 18 counter-pressure filling valves, 7-head crown capper, post-rinse and drying, touch panel, SEW 2.2 kW main drive, 4,000 bottles/h | 2019 - Pump cart | ABE | diaphragm pump for product feed | 2019 - Linear labeller | Basic Total | self-adhesive labels, bottle diameters 15-100 mm - Lot coder | Hitachi | UX-B160W | continuous ink-jet printer Fjdpfez Hz S Ajx Aanopp - Accumulation table | rotary, with infeed and accumulation controls - Case sealer | SOCO System | T-10 | with extendable roller conveyor Documentation Operator's manuals V1.2 and V1.3 and parts pictorial V2.2 for the GLASSPAK 66, labeller manual, original invoice. Condition Currently in operation. Availability Available now. Location: Spain.

Condition: used, Year of construction: 2003, Overview This complete filling line for non-returnable glass bottles was manufactured 2003 by several well-known European producers, mainly Sidel. The line is designed for high-capacity beverage production, handling up to 40,000 b/h and is in a good condition and designed for 3-shift 24/7 operation.  Technical Data - Capacity: 40,000 bph (at 0,25L) - Bottle Formats: 0.25L, 0.33L, 0,5L - Packaging formats: • 4x6 x 25cl • 1x12 x 25cl • 24x25cl • 24x30cl • 4x6 x 33cl • 6x4 x 33cl • 1x12 x 33cl •24x33cl • 20x50cl  - Application: beer, CSD, or other beverages in non-returnable glass bottles - Hygienic design - Automated change-over  Scope of Delivery Pallet Transport (Depalletiser) | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B Fedpsyb Tucsfx Aanspp Bulk Depalletiser | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B  Pallet Transport (Palletiser) | Sidel / SIG Simonazzi | 2003 | LINEAR Tray and/or Carton Palletiser | Sidel / SIG Simonazzi | 2003 | LINEAR Pallet Shrinkwrapper | Sidel / SIG Simonazzi / MSK | 2003 | ECONOTECH/TOWERTECH Pallet Labeller | Sidel / SIG Simonazzi / Logopak | 2003 | LOGOMATIC 920 II PF Basket Erector | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLA Fourpack Transport and Divider | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLW Basket Inserter | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLE Carton Packer | Sidel / SIG Simonazzi / FANUC | 2003 | ROBOKOMBI Carton Closer | Sidel / SIG Simonazzi / Bortolin | 2003 | MARA H.M Carton Marker 1 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Carton Marker 2 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Weight Checker | Prisma | 2003 | 10D3 Full Carton Inspection | BBull / Centro Kontrollsysteme | 2015 | Image VKK 500 Bottle Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Carton Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Crown Cork Feeder | Sidel / SIG Simonazzi | 2003 | SM80 Rinser | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Filler | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Crowner | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP C.I.P. | Sidel / SIG Simonazzi | 2003 | AUTOSAN Fill Height Control | Sidel / SIG Simonazzi / Heuft | 2003 | SPECTRUM TX Tunnel/Bottle Pasteuriser | Sidel / SIG Simonazzi | 2003 | PAMA CLD 50/144 Bottle Coding on Necklabel | Mundi-Technology | 2015 | Mundiscan UP2000 HE Labeller | Sidel / SIG Simonazzi / Krones | 2003 | Topmodule Type 407 Bottle Inspection & Sorting | Sidel / SIG Simonazzi / Krones | 2003 | Checkmat type 707 Tap tone | Sidel / SIG Simonazzi / Krones | 2003 | TapTone 500 Series

Condition: used, machine/vehicle number: PST37, Used pasteurizer for tomato juice 400 CPMTechnical Specifications & Performance DataThis BOND four-module tunnel pasteurizer-cooler is designed for the thermal treatment and controlled cooling of tomato juice containers. Built primarily in stainless steel, the machine combines pasteurization and cooling stages on a continuous Intralox plastic mesh conveyor, providing a robust solution for industrial packaging and beverage production applications requiring extended thermal processing.Maximum production speed: For tomato juice 400 containers per minute (24.000 unit per hour) for beer 600 container per minut (36.000 unit per hour).Alternative operating condition: 300 containers per minute ( overhauled, in excellent condition )Thermal length: 27,400 mmUsable width: 3,200 mmUseful processing area: 80 m²Total internal capacity: 22,000 piecesProduct weight used for the thermal calculation: 450 gContainer format indicated: 2.0LAdvanced Automation & Control SystemsThe pasteurizer is supplied with an electrical control panel for management of the thermal treatment and conveyor process. Water tanks, recirculation pumps, heat-exchange equipment and the continuous conveyor are integrated into a coordinated operating system. The design includes recirculating-water circuits serving the pasteurization and cooling sections.Thermal performance data indicate pasteurization water at 95°C, with a cooling-tower temperature difference of 10°C. The documented recirculating-water volume is 80 m³/h, with additional pump references of 65 m³/h and 165 m³/h.Production Line Integration CapabilitiesThis tunnel pasteurizer is suitable for installation in a used bottling line or industrial packaging line where filled containers require pasteurization before downstream handling, labeling or secondary packaging. Its continuous mesh conveyor configuration supports inline product flow between upstream filling equipment and downstream cooling, inspection or packaging machinery.The machine was originally engineered for tomato juice, a product requiring longer pasteurization times and higher pasteurization temperatures than beer. The system can therefore be evaluated for beverage production and food-processing applications with comparable thermal-treatment requirements. The cooling section includes a 20 m² buffer conveyor to support controlled product discharge and line balancing.Machine Condition & Maintenance HistoryPresented as like new and fully operational, the machine is complete with the accessories required for operation. The all-stainless-steel construction supports durability and hygiene in demanding production environments, while the Intralox mesh belt provides continuous container transport through the thermal and cooling zones.Operational Performance & VersatilityAt 400 containers per minute, the maximum documented thermal cycle lasts 55 minutes. Pasteurization represents 25% of the cycle, with 14 minutes at 95°C water temperature, followed by 41 minutes of cooling using cooling-tower water. At 300 containers per minute, a revised 60-minute cycle is indic... Fpedpfx Aozvl S Ieanep

Condition: used, Year of construction: 1998, Overview This Krones Sensometic beer filling system was manufactured in 1998 and was previously installed in a high-capacity beverage bottling line. The machine is designed for the isobaric filling of beer and is equipped with 77 filling valves, enabling high-throughput production. The filler is configured as a filling and capping block and includes two capping units: one for screw caps and one for crown cork closures. Both capping systems are equipped with 12 capping heads, and the closure sorting systems are integrated on the machine. With a designed line capacity of approximately 33,000 bottles per hour, the machine is suitable for large-scale returnable glass bottling operations. The system supports a wide range of bottle formats typically used in the beer industry. Technical Data Manufacturer: Krones Series: Sensometic Model: VPVI 77-103 / KK11 / SV11 Machine type: Isobaric beer filling machine with integrated capping systems Year of manufacture: 1998 Filling valves: 77 Capacity: approx. 33,000 bottles per hour Capping systems: - Screw capper – 11 heads - Crown cork capper – 11 heads Closure handling: Fpsdpfx Asytqzwoanep - Integrated closure sorting systems on the machine Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Condition: Used Availability: On request

Condition: used, Year of construction: 2007, operating hours: 14,700 h, machine/vehicle number: ET194, Labeling machine for sale with optical centering 6000 bphTechnical Specifications & Performance DataThis P.E. Labellers rotary adhesive labeler with optical centering is engineered for precision bottle decoration within a used bottling line or new installations. Built for consistent, high-quality labeling across beverage production environments, it balances speed with accuracy and repeatability.Manufacturer / Model: P.E. Labellers – 8T 4S 4E adhesive SL GlueYear of manufacture: 2007Production speed: up to 6,500 bottles per hour (bph)Stations / Plates: 4 adhesive stations; 8 motorized plates with dedicated photocellsOptical centering: Advanced system for precise label alignment on decorated, embossed, or irregular bottlesLabeling applications: Body, back, neck and optional L-/U-seal for caps (via dedicated adhesive unit on trolley)Container types: PET and glass bottles; adaptable for other rigid containers (e.g., aluminum) with appropriate format partsProducts: Suitable for water, juice, beer, wine, spirits, soft drinks, and moreDimensions (WxLxH): 2000 x 2900 x 2500 mmWeight: 2100 kgElectrical requirements: 380 V, 50 Hz, 5 kWConfiguration codes (OEM): No. of plates: 8; Rotation direction: 1; Plate movement: 2; Number of stations: 4; Labeling method: 0,4; Label placement: 0,1,2,4; Optical centering system: 2; Head adjustment: 1Advanced Automation & Control SystemsAutomation is designed for reliable, repeatable labeling within industrial packaging lines. A touchscreen HMI and integrated PLC control all machine functions, offering recipe-based changeovers and real-time diagnostics. Servo-driven or motorized plates work in concert with photocells for synchronous optical centering, supporting premium presentation at full speed.Touchscreen HMI with programmable recipes (memory for multiple label formats)Integrated PLC and modern electronics; inverter-driven speed modulationElectric lift for quick height adjustment of the carousel and heads4-axis head adjustment on trolley for precise head positioningPhotocell-controlled label application synchronized with optical centeringManuals available for operation, maintenance, and programmingProduction Line Integration CapabilitiesEngineered to integrate seamlessly upstream and downstream with rinsing, filling, and capping machines, as well as inspection systems, coders/inkjets, and secondary packaging (shrink, wrap-around, or case packing). This second hand labeler is ideal for upgrading or completing a used bottling line without compromising performance.Compatible with standard conveyors, accumulation tables, and line controlsFast format changes supported by stored recipes and mechanical referencesMulti-format flexibility for different bottle heights and diameters with the right format setsInterfaces available for line start/stop and speed cascade with fillin... Fpodpfx Aovlnvrsanep

Condition: used, Year of construction: 2021, Overview The tangential filter system was built in 2021 by the Spanish company sefiltra and used for the filtration of beer. The owner had purchased all the equipment to set up a microbrewery but then decided to shift the production of his beer to a bigger brewery, producing for him.  Techn. details  Filtration system is mounted on stainless steel frame with rollers  Control system: Siemens S7  4 filter cartridges  Recirculation pump CIP connection options Filters particles from 300 µm Fodpjl Hxnxjfx Aanjpp

Condition: used, Year of construction: 2003, machine/vehicle number: PAL61, Used TMG Strio 2S1 palletizer 14000 BPHTechnical Specifications & Performance DataThe TMG Strio 2S1 Palletizer is a robust solution for end-of-line packaging in beverage production and industrial packaging environments. Designed to handle multiple container materials and pack styles, it delivers reliable throughput for used bottling line applications and second hand packaging upgrades. Manufactured by TMG in 2003, this palletizer supports wrap-around, tray, and film packages, making it a versatile choice for high-mix operations.Manufacturer: TMGModel: Strio 2S1Year: 2003Production speed: up to 14,000 bottles per hourPack configurations: wrap-around, tray, filmContainer materials: PET, Glass, Aluminum (cans)Current formats: 0.33L, 0.5L, 0.75L, 1.0LSupported pallets: Eur-Epal 800x1200 mmWorking height (conveyor level): 750 mmElectrical supply: 400 V, 3-phase + TCompressed air: 6 barControl: Siemens PLC with HMI S7-300Auxiliary system: Automatic layer-pad inserterAdvanced Automation & Control SystemsEngineered for dependable automation, the palletizer features a Siemens PLC and an operator-friendly HMI based on the S7-300 platform. This control architecture ensures precise motion coordination, consistent layer formation, and straightforward diagnostics. Recipe-based operation enables quick selection of formats and pack patterns, while the automatic layer-pad inserter enhances load stability and minimizes manual intervention. The 400 V, 3-phase power supply supports industrial duty cycles in demanding beverage production environments.Production Line Integration CapabilitiesThe TMG Strio 2S1 integrates smoothly into existing bottling equipment and packaging machinery. It can operate inline with shrink wrappers, wrap-around case packers, and tray packers, or as a standalone palletizing cell. Its compatibility with PET, glass, and aluminum containers across 0.33L to 1.0L formats provides multi-product flexibility for water, CSD, beer, wine, milk, oil, and spirits. Standard pallet handling for Eur-Epal 800x1200 mm simplifies logistics and downstream pallet wrapping.Machine Condition & Maintenance HistoryAvailable used and ready for operation. The unit can be supplied overhauled and guaranteed, or on an as-is basis depending on production needs. This flexibility supports rapid commissioning for second hand line expansions or phased maintenance strategies.Operational Performance & VersatilityBuilt for high uptime and consistent performance, the Strio 2S1 manages wrap-around, tray, and film-packed units with accurate layer formation. The automatic layer-pad inserter optimizes load stability for transport. Its broad container material compatibility makes it suitable for beverage production, including still and sparkling water, soft drinks, beer, wine, milk, oil, and spirits, as well as mixed-format industrial packaging.Installation Requirements & Site PreparationThe machine requir... Fpodjzcf Nbepfx Aanop

Condition: used, Year of construction: 2016, Overview Automated 2-vessel steam brewhouse for 20 BBL (2,347 L) batches, built in 2016 by American Beer Equipment (ABE), Lincoln, Nebraska, USA. The package covers the complete hot side: mash/lauter tun, kettle/whirlpool, hot and cold liquor tanks, plate heat exchanger, UL control cabinet with touch-panel HMI, an ATTSU steam generator and a reverse osmosis water treatment unit. Currently installed and in operation. Technical data - Manufacturer: American Beer Equipment (ABE) - Year of manufacture: 2016 - Batch size: 20 BBL (2,347 L) - Mash/lauter tun: 20 BBL (2,347 L), rake drive with 3 HP SEW gear motor - Kettle/whirlpool: 20 BBL (2,347 L) - Hot liquor tank: 30 BBL (3,520 L), steam heated - Cold liquor tank: 2,347 L - Heating: steam (brewhouse and hot liquor tank) - Material: AISI 304 stainless steel, vessels and piping - Connections: 1-1/2" Tri-Clamp sanitary - Pumps: 2 HP stainless sanitary centrifugal pumps, 30 GPM at 15 PSI - Operation: automatic valves, transfers and pumps, controlled from the HMI - Electrical supply: 380 V, 3-phase, 50 Hz, 40 A Scope of Delivery - Mash/lauter tun | ABE | 20 BBL | rakes with SEW gear motor, grist hydrator, wort grant, mash pump | 2016 - Kettle/whirlpool | ABE | 20 BBL | steam heated, brew pump | 2016 - Hot liquor tank | ABE | 30 BBL | 3,520 L, steam heated, HLT pump, liquor blending assembly | 2016 - Cold liquor tank | ABE | 2,347 L | 2016 - Plate heat exchanger | ABE | 20 m² | AISI 304 plates, design temperature 150 °C, rated pressure 116 PSI (8 bar) | 2016 - Control cabinet | ABE | UL | touch-panel HMI, temperature controllers for mash, kettle and HLT, Delta frequency inverters | 2016 - Steam generator | ATTSU | RL-300/12 | natural gas burner, max. working pressure 12.3 bar, max. temperature 193 °C, 501 L total volume, 3 x 400 V, 1,130 kg empty weight | 2016 - Reverse osmosis unit | with water softener and brine tank - Hard-plumbed AISI 304 sanitary piping with automatic valves Documentation ABE brewhouse manual (specifications, plumbing and electrical diagrams, HMI screens) and ATTSU steam generator manual. Condition Fpedoz Iypvepfx Aanep Used, installed and in operation. Availability From 23 September 2026. Location: Spain.

Condition: used, Year of construction: 2016, Overview Fodpjz H Ad Tsfx Aanjpp Complete fermentation and cellar plant from a craft brewery in Spain: 18 cylindro-conical fermenters with 64,000 L net fermentation capacity, 3 vertical brite tanks, the ABE glycol temperature control boxes and a York air-cooled chiller - 77,900 L of cellar capacity in total. The core of the plant was built by ABE (American Beer Equipment) in 2016 and is completed by fermenters from INOX GC and Impiantinox. All tanks are stainless steel with cooling jackets and are installed and in operation until dismantling. The plant is offered as a complete package; sub-lots or individual tanks are possible on request. Technical data - Fermenters: 18 units, 64,000 L net in total - Brite tanks: 3 units, 23.47 hl, 46.94 hl and 70.41 hl - Total cellar capacity: 77,900 L - Material: stainless steel, cylindro-conical fermenters on legs - Cooling: glycol jackets, individual digital temperature controller per tank - Chiller: York YLCA air-cooled chiller, cooling capacity 52.1 kW - Main build year: 2016 (ABE) Scope of Delivery - Isobaric fermenter | ABE | 3 x 2,000 L net (23.47 hl gross) | cylindro-conical, cooling jacket, side manway | 2016 - Fermenter | ABE | 8 x 4,000 L net (46.94 hl gross) | cylindro-conical, cooling jacket, side manway | 2016 - Fermenter | ABE | 2 x 7,000 L net (70.41 hl gross) | cylindro-conical, cooling jacket, side manway | 2016 - Fermenter | ABE | 1 x 8,000 L net (93.88 hl gross) | cylindro-conical, cooling jacket, side manway | 2016 - Isobaric fermenter | INOX GC | 2 x 1,000 L | cylindro-conical, CE plate | 2019 - Fermenter | Impiantinox | 2 x 1,000 L (max. usable 1,150 L) | cylindro-conical, CE plate | 2008 - Vertical brite tank | ABE | 3 units: 23.47 hl, 46.94 hl, 70.41 hl | pressure gauge, side manway | 2015 - Glycol temperature control boxes | ABE | one digital controller per tank | with parts catalogues and manuals | 2016 - Air-cooled chiller | York | YLCA | 52.1 kW cooling capacity Condition Used, installed and in operation until dismantling. Manuals and parts catalogues for the ABE tanks and control boxes are available. Viewing possible by appointment. Availability Available immediately. Sold as a complete package; sub-lots or individual units on request.

Condition: used, Year of construction: 2003, Overview This PALL Microflow filtration system is designed for the crossflow filtration of beer, enabling continuous and fully automated clarification processes. The system is configured as a tandem installation with a capacity of up to 50 hl/h, suitable for medium to high-capacity brewery operations. It operates with membrane filtration modules, allowing gentle product handling and stable filtration performance. The unit includes pumps, integrated CIP system, and Siemens-based automation, ensuring a high degree of process control and hygiene. Technical Specs  - Capacity: approx. 50 hl/h (tandem system, 24h operation) - Filtration type: Crossflow (microfiltration) - Number of modules: 48 Fpsdsy Etcpjpfx Aansp - Operating temperature range: 0°C to 70°C - Equipment: Pumps, integrated CIP system, complete piping, control system - Control system: Siemens S7 with Siemens OP07 HMI - Automation level: Fully automatic Equipment  - Filtration modules (48 units) - Product pumps - Integrated CIP system - Complete piping system

Condition: used, Year of construction: 2002, Overview  This isobaric beer filler was manufactured in 2002 by German company KHS. The machine is configured for 500 ml glass bottles with crown cork and achieves a capacity of 44,000 bottles per hour. It was used for filling beer at 10–12 °C. The machine will be available from November 2025 and remains installed until then. A site inspection can be arranged upon request. Technical data  - Capacity: 44,000 bph (500 ml glass bottles) - Formats: 500 ml glass bottles - Filling principle: Isobaric (mechanical filling system) - Number of filling stations: 144 - Crowner: 24 stations (crown cork) - Operating voltage: 400 V - Frequency: 50 Hz - Control system: Siemens S7-400 - Control cabinet: Air-conditioned, stainless steel - Operating hours: approx. 30,000 (as of Nov. 2024) - Direction: Left to right Scope of Delivery - Filler: KHS Innofill DMG SVF 144-KK24 - Crown corker with 24 stations - Control cabinet and operator panel - Bottle clamping star wheels - CIP cups - High-pressure injection (HDE) - Bottle shower at discharge - Bottle table in roof optic - Central lubrication system - VPN remote access capability - Safety housing (updated in 2016, with flushing system) Fpedpfxowif Dgj Aanjp - Touch panel - Cork feeding unit by NSM - Filling level inspection system: Krones Checkmat (2015)

Condition: used, Year of construction: 2016, Overview This ABE KEG COMMANDER DUAL HEAD is an automatic keg washer built in 2016 by American Beer Equipment (USA) for craft breweries. Two kegs are processed side by side in a PLC-controlled cleaning cycle, with an output of 24-30 kegs per hour. The compact stainless steel unit carries its tanks, pumps and piping in its own frame and is still installed in a craft brewery in Spain, which is ceasing operations. Technical data - Manufacturer: ABE - American Beer Equipment (USA) - Model: KEG COMMANDER DUAL HEAD - Year of manufacture: 2016 - Machine type: automatic keg washer with 2 washing stations Fedez Hc Uljpfx Aanopp - Output: 24-30 kegs/h - Operating mode: automatic, PLC with HMI display - Tank volume: 25-30 US gal (approx. 95-115 l) - Maximum power consumption: 11.3 kW - Electrical supply: 3-phase - Feed water: min. 4.1 bar (60 psi) at approx. 57 l/min (15 gpm) - Compressed air: 6.2 bar (90 psi) at approx. 480 Nl/min (17 SCFM) - Air drain pressure: 1.4-2.1 bar (20-30 psi) - CO2 supply: 6.2 bar (90 psi) at approx. 480 Nl/min (17 SCFM) - Machine weight: 220 kg Equipment - Two washing stations with height-adjustable keg holders and wash heads - Control panel with HMI display, a cycle start button per station, cycle cancel and emergency stop - Integrated stainless steel tanks - Two Goulds pumps with 3-phase motors - Stainless steel piping with water and drain connections and manual ball valves - Operator's and technical manual (English) Condition Used, installed and in operation until the brewery closes. Inspection on site possible on request. Availability Immediately. Location: Spain.

Condition: used, Year of construction: 2015, Pentair BMF-Skid (with 18 modules) for beer filtration. Ideal for expanding existing systems or setting up a new filtration system. Additional title: Beer Membrane Filtration (BMF) Max. capacity: 100 hl/h filtrate, depending on beer quality Flow rate: 330 m3/h un-filtrate pump Flow pressure: 1 bar un-filtrate pump Number of modules: 18 pcs. Length: approx. 5500 mm Width: approx. 1500 mm Operation / Control: ProfiBus connection to a central PLC Fpsdpfx Aajw Ea Eksnop Base construction: Module frame-mounted Features: 1 x BMF Skid, with 18 membrane modules; filtrate pump

Condition: used, machine/vehicle number: TP120, Used AROL 10 head capping machine - 20000 BPHTechnical Specifications & Performance DataManufactured by Arol, this rotary capping machine is engineered for high-speed beverage and food packaging applications. With a robust rotary design and 10 capping heads, it ensures consistent torque application and stable, continuous motion for reliable closure performance. The machine is ideal for integration into a used bottling line or as a second hand upgrade within modern industrial packaging and beverage production environments.Manufacturer: ArolMachine type: Rotary capping machineProduction speed (max): 20,000 bphNo. of heads: 10Container material: PETThread/neck size: 38 mmMaximum bottle height: 320 mmWorking table height: 1200 mmWork direction: ClockwiseTransfer type: Body transferElectrical supply: 400 V, 3-phase, 50 HzAdvanced Automation & Control SystemsThe rotary platform with 10 heads provides continuous capping at high speed with precise, repeatable application. Operator-oriented controls support efficient start-up and adjustments, while the clockwise rotation facilitates standard inline layouts. Changeover between formats is streamlined by the rotary architecture, and an optional cap elevator is available to support automated cap feeding and increased autonomy.Production Line Integration CapabilitiesThis Arol capper is designed for smooth integration with upstream fillers and downstream inspection or labeling systems in a complete packaging line. Body transfer handling provides stable container control through the capping carousel, reducing scuffing on PET bottles and maintaining line efficiency. The machine is suitable for a wide range of beverage production setups and industrial packaging lines, providing flexibility for multiple product types and closure programs based on a 38 mm neck finish.Machine Condition & Maintenance HistoryThe unit is ready for operation, overhauled, and guaranteed to ensure immediate deployment on your production floor. It is offered with a 6-month warranty period. The machine is described as ready to use, with compatible spare parts available, reflecting diligent maintenance and a strong service profile suitable for rigorous daily operation.Operational Performance & VersatilityConfigured for PET bottle handling, the capper supports products such as still and sparkling water, soft drinks, milk, oil, beer, wine, and spirits. The 38 mm threaded neck finish is common across dairy, juice, and other beverage applications, enabling efficient closure application at up to 20,000 bottles per hour. The rotary mechanism helps ensure uniform torque and seal integrity, contributing to consistent product quality in high-throughput environments.Installation Requirements & Site PreparationInstallation requires standard industrial power at 400 V, 3-phase, 50 Hz. The working table height of 1200 mm and maximum bottle height of 320 mm support ergonomic line design and compatibility with typical conveyors and starwheels. T... Fodpfx Aoz E Dkljanepp

Condition: used, Year of construction: 1998, Overview This Krones Linapac A-T-1600 automatic bottle unpacker was manufactured in 1998 and was previously installed in a returnable glass beer bottling line. The machine is designed to automatically remove empty bottles from beverage crates and transfer them onto the bottle conveyor system for further processing. The unpacker was operated in a production line with a capacity of approximately 33,000 bottles per hour, making it suitable for high-capacity returnable glass operations. Machines of the LINAPAC series are widely used in the beverage industry due to their robust design and reliable crate handling. The machine is currently out of production but complete, electrical disconnected, and available for inspection. Documentation and CE conformity are available. Fpsdoytpc Hopfx Aanop Technical Data Manufacturer: Krones / Linapac Model: A-T-1600 Machine type: Automatic bottle unpacker Year of manufacture: 1998 Designed line capacity: approx. 33,000 bottles per hour Application: Automatic removal of empty bottles from crates in returnable glass lines Bottle Formats - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm Condition: Used, available for inspection Documentation: Available Compliance: CE conformity available Availability: On request

Condition: used, Year of construction: 2016, Overview This GAI MLE 661 BIER is an isobarometric rinsing, filling and crown-capping monoblock for glass bottles, built in 2016 by GAI Macchine Imbottigliatrici S.p.A. (Ceresole d'Alba, Italy) and put into production in 2018. The block combines rinsing, isobaric filling over 6 filling valves and crown capping in a single frame. It is set up for craft beer in 0.33 L, 0.5 L and 0.75 L glass bottles with crown caps in 26 mm and 29 mm. Cycle times, line speed and production counters are managed from the machine's touch panel. The machine is still installed and under power. Technical data - Manufacturer: GAI Macchine Imbottigliatrici S.p.A. (Ceresole d'Alba, Italy) - Model: MLE 661 BIER (nameplate designation MLE661 BIER 003) - Year of manufacture: 2016 (in production since 2018) - Machine type: isobarometric rinser - filler - crown capper monoblock, glass bottles - Filling valves: 6 - Capacity: up to 1,300 bph - Products: Beer and other carbonated beverages (isobarometric filling) - Bottle formats: 0.33 L / 0.5 L / 0.75 L glass - Crown caps: 26 mm and 29 mm Fedpfx Aaezx Dt Nonepp - Control: touch panel with cycle-time, speed and production counters - Power supply: 6.38 kW - Air supply: 6 bar - Dimensions: approx. 480 x 130 x H 230 cm Equipment - Format parts for the listed bottle formats and both crown sizes - Spare parts Condition Used - in production, still installed and under power. Approx. 6,800 operating hours; in December 2025 the machine counter showed 5,982 operating hours and approx. 6.25 million bottles filled. Last maintenance December 2025. Availability From 27 November 2026. Location: Croatia. The machine can be visited in production on request.

Condition: used, machine/vehicle number: TP121, Used AROL 8 head capping machine - 16000 BPHTechnical Specifications & Performance DataThis rotary capping machine is engineered for high-efficiency closure application on PET bottles across beverage and food sectors. Manufactured by Arol, it features an 8-head rotary configuration designed to deliver stable throughput and precise cap application at industrial speeds. Its compact footprint and ergonomic working height support streamlined operation within modern bottling equipment layouts and industrial packaging environments.Manufacturer: ArolMachine type: Rotary Capping MachineModel: 8 testeNo. of capping heads: 8Maximum speed: up to 16,000 bphContainer material: PETNeck/closure specification: 38 mm threadRotation direction: CounterclockwiseTransfer type: Body handlingMaximum bottle height: 320 mmWorking table height (H): 1200 mmElectrical supply: 400 V, 3 PH, 50 HzAdvanced Automation & Control SystemsBuilt for consistency and reliability, this rotary capper supports precise application of 38 mm plastic screw closures on PET containers. The 8-head turret ensures uniform torque distribution and repeatable performance across sustained production runs. The electrical configuration (400 V, 3-phase, 50 Hz) aligns with common industrial power standards, facilitating straightforward integration with existing control panels and line PLCs. Quick format adjustments and operator-friendly settings help reduce changeover times and improve uptime in beverage production and industrial packaging operations.Production Line Integration CapabilitiesThe machine integrates seamlessly into a used bottling line or a new installation as a standalone capper. Counterclockwise rotation and body-handling transfer allow smooth infeed/outfeed with standard conveyors. A cap elevator is available as a separate option to automate cap feeding and maintain continuous operation. Bottle handling supports PET formats within a height range up to 320 mm, enabling multi-product flexibility across water, soft drinks, wine, beer, milk, and oil lines.Machine Condition & Maintenance HistoryThe unit is ready for operation. It has been overhauled and is offered with a 6-month warranty. Supplied with compatible spare parts, it is presented in ready-to-use condition and available on an “as seen and approved” basis—ideal for facilities seeking a dependable second hand capper with minimized commissioning time.Operational Performance & VersatilityDesigned for PET containers with a 38 mm threaded neck, this rotary capper suits a wide scope of beverage and food applications. It is an excellent fit for water (still and sparkling), soft drinks (CSD), wine, beer, milk, and edible oil. The 8-head configuration balances speed and gentle handling, maintaining product integrity and closure quality at up to 16,000 bottles per hour. Its industrial-grade build and precise head motion support consistent sealing performance within demanding production schedules.Installation Re... Fodpfx Aez E Dkrsanopp

Condition: used, Year of construction: 2021, Gravimetric short-tube glass bottle filler with 16 filling valvesand crown cork capper. Controlled via Eaton PLC. Additional title: gravity filling and crown cork capping Capacity: 2800 bo/h max. filling volume capacity 2,200 l/h Power: 4,5 kW Voltage: 380 V Frequency: 50 Hz Compressed air: 14,4 Nm³/h, 5 - 6 bar, 8 mm connection Length: 2,30 m Width: 1,42 m Height: 2,50 m Fedpfx Asxbpchoanepp Weight: 1800 kg Formats: Longneck 0,33 l, Vichy 0,33 l, Steinie 0,33 l, Belge 0,75 l - crown corks 26 mm Operation / Control: SPS Eeton Features: 16 filling valves, 1 capping head, beer connection clamp DN32

Condition: used, Year of construction: 2005, Overview These 8 isobaric pressure tanks (500 hl each) manufactured by Sirio Aliberti in 2005 originate from the wine industry and were previously used for sparkling wine production. With a working pressure of up to 6 bar and full insulation, the tanks are well suited for fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and similar products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, combined with polyurethane insulation and stainless steel external cladding. This design represents a traditional and cost-efficient alternative to stainless steel tanks, which became standard in later years. Thanks to their large volume and isobaric capability, these tanks are particularly suitable for high-capacity production environments. As with all epoxy-coated vessels, regular inspection and renewal of the internal coating is required, depending on operating conditions. TECHNICAL DATA Fjdey Hkkajpfx Aanspp - Manufacturer: Sirio Aliberti - Year of Manufacture: 2005 - Quantity: 8 units - Type: Isobaric pressure tank - Application: Fermentation, maturation, storage of carbonated beverages - Capacity: 500 hl per tank - Material: Base: Carbon steel Internal coating: Food-grade epoxy Insulation: Polyurethane External cladding: Stainless steel sheet - Working Pressure: 6 bar - Dimensions (per tank): Internal Diameter: approx. 3,200 mm External Diameter: approx. 3,450 mm Cylinder Height: approx. 5,250 mm Leg Height: approx. 1,200 mm Total Height: approx. 7,800 mm

Condition: new, mileage: 500 km, power: 265 kW (360.30 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total length: 9,800 mm, total width: 2,550 mm, total height: 3,500 mm, loading space volume: 40 m³, loading space length: 7,350 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, tail-lift, * ORTEN Sideliner hydraulic swivel wall body * DEKRA certified according to VDI 2700 ff and DIN EN 12642 Code XL * Beverage certificate * Draught beer certificate * Reversing camera * 2,000 kg Bär tail lift * 4-row cargo securing system * Ball and pintle hitch * Trailing axle * Fully air-suspended * Automatic transmission * Euro 6 * Constant throttle * Cab = Classic Space, medium length Fpedpfxo Aa Emws Aanjp * Lane keeping assist, attention assist, turning assist, and Active Brake Assist * Traffic sign recognition, roll control, and stability assist * Distance control cruise control * Safety package * Navigation system * Sunroof * Air conditioning * Heated seats * Spoiler * Sun visor

Condition: used, Manufacturer: Krones Model: VK2V 050-113-KK10 Capacity: 19,000 bottles/hour Equipment: Beer in 0.5 l glass bottle Year of manufacture: 1991 Feeding system: Bloc Fpjdjyzhkyepfx Aanjp Direction of operation: right to left Filler: VK2V 050-113 Filler pitch: 113 mm Filling stations: 50 units Execution: Height adjustment of filling bowl, automatic bottle shards rinsing, mechanical filling system, bottle shower, HDE Capper: Crown capper 10-113 Execution: Height adjustment of capper head