Used Blood Presure Device for sale (11,254)

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in the stabilized state according to IEC 60068-3-5, depending on the test chamber temperature ± 1 K over time Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Nsdpfxozh D S Rs Afwjwk Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the support grid Water level = 0 mm The water level is at the top edge of the support grid Data for spray device, standard Number of spray nozzles 6 Spray volume per nozzle 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles 6 Spray volume per nozzle 4.5 l/min Additional flooding nozzles 2 Spray volume additional nozzle 6 l/min Compressed air consumption approx. 3 m³/h Data for water tank with preheating Volume approx. 2000 l Temperature range for preheating +5°C to +40°C Temperature change duration Cooling from +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Data for installation and operation: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left Test chamber volume: approx. 500 liters Refrigerant R-404a Electrical connection: Rated voltage 3/N/PE AC 400V ± 10% 50Hz Rated power approx. 26 kW Rated current approx. 44.0 A (neutral conductor loaded) Fuse 63 A gG, on-site Weight approx. 890 kg net For your safety as a buyer, the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2002, The Velcorin dosing system was developed by Lanxess for beverage preparation. The system has a dosing pump that precisely doses the Velcorin preservative and is designed for industrial use. The system has already been dismantled and is ready for collection.  Technical details  - Capacity (beverage volume): 6.000 - 36.000 l/h - Dosing rate: up to 20 ml Velcorin / hl - Flow meter Endress + Hauser Nedpsyhpdaefx Afwewk Further details against request. 

Condition: used, Year of construction: 2002, The Velcorin dosing system was developed by Lanxess for beverage preparation. The system has a dosing pump that precisely doses the Velcorin preservative and is designed for industrial use. The system has already been dismantled and is ready for collection.  Technical details  Nwsdpfx Aoyhn Sisfwjk - Capacity (beverage volume): 6.000 - 36.000 l/h - Dosing rate: up to 20 ml Velcorin / hl - Flow meter Endress + Hauser Further details against request. 

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Motorized tank/boiler turning device with rail-mounted chassis Nwodpfxjhcnhms Afwsk Technical data: - Total load capacity, driven + follower unit: 40,000 kg - Load capacity per tank/boiler turning device: 20,000 kg - Workpiece diameter: approx. 500 - 3,500 mm - Axle distance of the support rollers adjustable via trapezoidal screw spindle - Roller diameter: 500 mm - Roller width: 150 mm - Driven unit with drive on both sides - Continuously adjustable rotational speed - Handheld remote control for forward and reverse rotation - Drive: 400 V - Both units are mounted on rail-mounted chassis - Space requirement, driven unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Space requirement, follower unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight, driven unit: approx. 2,500 kg - Weight, follower unit: approx. 1,800 kg

Year of construction: 2008, condition: used, machine/vehicle number: 820505-01+02, Lg. no. 24208 + 24209 2 pcs. Load turning devices Nsdpfetpbwhsx Afwowk Technical data : - Load capacity per ROTOMAX 25 t - max. torque 14000 Nm - Rotation speed 2.6 m/min - Operation via manual remote control with intermediate cable - Length of intermediate cable approx. 8 m - Load turning belt with 160 mm belt width - Mounting pin 140 mm - Connection 400 V / 3.0 kW each - Space requirement per unit approx. W 2200 x H 1300 x D 900 mm - Weight per unit approx. 2100 kg

Condition: good (used), Offer 25348 Technical data: - 15 units 300 x 200 x 100 mm Nwjdey Nl A Aepfx Afwsk - Left and right versions - Total weight approx. 250 kg

Condition: good (used), Year of construction: 2001, machine/vehicle number: 443954701005, Offer 25086 Hydraulic profile and bar steel shears with notching device and hole punch Technical specifications: - Flat steel shears - Flat steel - 400 x 120 mm - or: 300 x 22 mm - Section steel shears - L- and T-bars at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notcher - With square notcher for sheets up to approx. 13 mm - Notching depth approx. 70 mm - Notching width approx. 52 mm - Hole punch Nwedpfx Afov I Sxvswjk - Punching force approx. 100 t - Throat 510 mm - Stroke approx. 10 to 50 mm - Punches in steel up to Ø 31 mm in 25 mm - Electric contact stop - Various 10 punching dies + Dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 0156084906226, Offer 23145 Hydraulic Flat, Profile, and Bar Steel Shear with Notching Device and Punching Unit Technical Specifications: - Flat Bar Shear - Blade length: 420 mm Nwodpfx Afsy Ddv Rewjk - For flat material: 400 x 15 mm - Profile Steel Shear - No blades installed - Angle steel at 90°: 110 x 10 mm - at 45°: 65 x 8 mm - T-steel at 90°: 90 x 10 mm - Bar Steel Shear - No blades installed - Round steel / Square steel: 35 / 32 mm - Notching device - For material up to 12 mm - Triangular notching: T 60 mm - Punching unit - Punching force: approx. 500 kN - Stroke, infinitely adjustable: 0 - 40 mm - Punches steel up to 30 mm Ø in 15 mm - Throat depth: 410 mm - Hydraulic drive: 400 V / 7.5 kW - Space required: approx. W 1400 x H 1800 x D 700 mm - Weight: approx. 1800 kg - Includes: various punches and dies, support/stop table, triangular notching unit, 2 foot pedal switches

Year of construction: 1985, condition: good (used), machine/vehicle number: XXXX, Item No. 21392 Approximate technical data: - Total load capacity of driven and idler unit: 25,000 kg - Load capacity per container device: 12,500 kg - Workpiece diameter (approx.): 500 - 4,000 mm - Adjustable center distance of support rollers - Roller diameter: 400 mm Nwjdpfx Afek Eatdewek - Roller width: 120 mm - Infinitely adjustable rotational speed - Handheld remote control for forward and reverse operation - Drive: 400 V - Space requirement of driven unit (approx.): W 3500 x H 850 x D 1000 mm - Space requirement with idler unit (approx.): W 2700 x H 850 x D 800 mm - Weight of driven unit (approx.): 1,300 kg - Weight with idler unit (approx.): 900 kg

Year of construction: 1998, condition: good (used), Offer 23126 Technical data: - Total payload driven + travelling unit 20000 kg. - payload per container device 10000 kg Nodjnwmt Ijpfx Afwewk - workpiece diameter approx. 500 - 3500 mm - center distance of the articulated support arms man. adjustable - Roll diameter 4 x per support arm 250 mm each - roller width 4 x each support arm 80 mm - infinitely variable turning speed approx. 100 - 1500 mm/min - manual remote control for Re- and Li.-run - drive 400 V - space requirement with running unit approx. W 1700 x H 1100 x D 1000 mm - space requirement with running unit approx. W 1700 x H 1100 x D 700 mm - Weight attached unit approx. 1400 kg - Weight with running unit approx. 1000 kg

Condition: used, manufacture Nelson Type FSE 100 / FSE 500 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Includes welding head, hoses, and control cabinet. Nwsdpfxoy Ihbxo Afwjk 15 x Nelson FSE 100 + N4 Inverter 5 x Nelson FSE 500 + N4 Converter Price per unit. Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: good (used), Year of construction: 1994, Window processing line, CNC window manufacturing plant, window angle machine, clamping device, pneumatic clamp Nsdeyibx Aopfx Afwswk -Manufacturer: Gubisch, clamping device from window manufacturing plant type DST H -Stroke: 120 mm -Clamping cylinder: airtec HM-25-120 -Number: 2x clamping device available -Price: per piece -Dimensions: 560/225/H80 mm -Weight: 5 kg/pc.

Condition: good (used), Contour measuring device, contour measuring device, contourograph, contourograph, roughness measuring device, roughness measurement, roundness measurement, roughness probe -Manufacturer: Hommel, measuring probe for roughness measuring device -Measuring probe: Type P2FE 30 / P2F E 100 -Individual components: see photos Njdpfxok Hdr Ts Afwswk -Box dimensions: 235/105/H30 mm -Weight: 0.4 kg

Condition: used, Container turning device, welding turning device, roller block, rotators, pipe straightening system, roller block turning device -Roller block: container turning device, without drive -Roll spacing: 290 to 1205 mm Nwedpfju Tlg Sox Afwek -Rollers: 4 pieces on both sides Ø 230 mm, total width 282 mm -Load capacity: kg -Dimensions: 940/640/H835 mm -Weight: 445 kg

Condition: excellent (used), Pressure gauge, test pressure gauge, pressure gauge with Bourdon tube, pressure and temperature measurement technology, contact pressure gauge -Manufacturer: Richter, manometer pressure gauge with limit signal transmitter -Type: 0 to 6 bar -Limit signaller: Type M1 -Screw connection: see photos Nwjdpfeiraxuox Afwek -Dimension: 170/135/H135 mm -Weight: 2.1 kg

Condition: good (used), Turning device, forging device, welding turning device, welding device -for: production of spirals, springs ... -Holder: Ø 88 x 300 mm -Speed: 31 rpm -Drive: 1.5 kW -Voltage: 400 V Nwedpfxscvpuao Afwjk -Dimensions: 1000/550/H1200 mm -Weight: 120 kg

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, thread cutting attachment -Manufacturer: Fahrion, thread cutting attachment GA 30 -Shaft: MK3 Nodpfewvfyuox Afwowk -Reversing gear: integrated quick return, slip clutch -Clamping diameter: max 23 mm -Dimensions: 230/125/H80 mm -Weight: 6.3 kg

Condition: good (used), Marking trolley floor marking device for professional markings Perfect Striper including holder for spare cans, marking device -Manufacturer: AMPERE, floor marking device Super-Striper -Line width: approx. 3 - 10 cm -Number: 3x marking device available -Price per piece -Dimensions: 880/340/H835 mm Nwedet Apm Aspfx Afwjk -Weight: 6 kg/piece

Condition: good (used), Inert gas welding device, inert gas device -Max. Welding power: 340 A. -4 roller drive Nedjb Hiy Sopfx Afwswk -Water-cooled -Incl. Ground cable -with removable wire feeder -Hose package length: 4000 mm -Dimensions: 1100/515/H1170 mm -Weight: 214 kg

Condition: good (used), portable oxygen breathing apparatus for tunnel boring -for: Herrenkecht tunnel boring machine -System-No: 009-07-06 Nodpfxob A Ibzj Afwswk -in: 2x aluminum cases -various hoses -Transport weight: 100 kg

Condition: good (used), Spreader device, door spreader, door mounting -Quantity: 8x per suitcase -Quantity: 2x spreader device included in case Price: per piece Nodeb A N N Uopfx Afwjwk -Weight: 15 kg/piece

Condition: good (used), Measuring device for µA -30 m² to 750 m² Nwjdpfxsb A N R Rs Afwjk -approx. 1000 ohms to 5000 ohms -Dimensions: 200/90/H265 mm -Weight: 3 kg

Condition: good (used), PLC control, compact device Njdpecar Aijfx Afwjwk -Manufacturer: SIEMENS -Type: Simatic S5-95U 6ES5 095-8MC01 -Number: 1 module available -Dimensions: 145/135/H140 mm -Weight: 1.34 kg

Condition: good (used), Year of construction: 1998, Tool setting device, tool presetting device, milling cutter setting device -Z-axis: 630 mm -unit of analysis -360 degree protractor Nsdpfx Afspam Avewswk -Dimensions: 570/1720/H1875 mm -Weight: 387 kg

Condition: good (used), Built-in control unit, control cassette, controller, bus controller, bus module -Manufacturer: B&R, Control unit controller -Type: X20 BC 0043 C01 -Power feed module: X20 PS 9400 -Number: 1 module available Nsdpfx Afoyxc Ibowjwk -Dimensions: 105/40/80 mm -Weight: 0.1 kg