Used Blown Film Extrusion for sale (1,686)

Condition: used, Year of construction: 2016, functionality: fully functional, Pratika 56-T that has been standing still for the last 5 years. Cedpexpq Hkjfx Aa Nepw

Year of construction: 2001, condition: used, press capacity 148 to material Hartmetallstangen Cjdpfx Ajt Hw Snja Nepw quality Extrusionspressvorgang 0

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Precision winding machine for films and web materials. Designed for consistent unwinding, guiding, and rewinding of roll materials. Integrated safety system with protective glazing, laser start position indicator (green), emergency stop switches, and pneumatic film guiding. Machine frame made of steel, electrically controlled drive. Ideal for production lines in coating or laminating technology. Cpedpfx Aasxzuiye Now

Condition: excellent (used), functionality: fully functional, Technical data: Operating voltage: 400V AC Main fuse: 50A Frequency: 50Hz Connected load: 19.1kW Control voltage: 24V DC Compressed air: 6 bar Production capacity: 20 x 2m modules/h Degree of automation: fully automatic Installation dimensions: 12.5 x 5.2 x 4m (Width x Height x Depth) Stations: Decoiler: This station loads the coil and unwinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400 Cosmetic tape applicator: Application of a cosmetic tape to the rear module edge of the product part using an applicator. Manufacturer: Printum Laser cell: Creation of contact openings on the rear module edge of the product part using a laser, and inspection of correct contact opening with pneumatic Ignun contact pins. Manufacturer: ACSYS Lasertechnik GmbH CO² Laser INLINER II 40W CO2 Inspection station: Empty cell for conducting tests on test material. Transfer tape applicator cell: Application of a transfer tape to the rear module edge of the product part using an applicator. Contact strip applicator cell: Cpedpfx Aasxzug Se Now Insertion of preforms (solder pads) into the opened contact openings, followed by application of a contact strip to the rear module edge of the product part using an applicator. Soldering station: Establishment of electrical contacts by soldering the preforms (solder pads) to the contact strip. Manufacturer: ATN Automatisierungstechnik Niemeier GmbH Flasher station: Testing the functionality of the product part using a flasher and simultaneous contacting with pneumatic Ignun contact pins. Manufacturer: WAVELABS Solar Metrology Systems GmbH Type: WLAAA0039 Designation: Module flasher Empty cell: Currently no processing of the product part. Recoiler: This station loads the coil and rewinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400

Condition: excellent (used), Stations/Equipment: Unwinder Cpjdpfx Aajxzufhj Now Rewinder Extraction system incl. shredder (4x Lundberg Type WT200-200U - year 2018) Inert enclosure Busbar laminating unit Cutting units Laminating units / adhesive application units Heated rollers Master computer Control cabinets Drive motors Gantry crane Corona treatment

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, table width: 1,700 mm, table length: 2,000 mm, passage height: 250 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Codpfjvvlyijx Aa Njpw Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Year of construction: 2016, condition: new, functionality: fully functional, HDPE Film washline construction year: 2016 Codpfxetuui De Aa Njpw 0 working hours (was never in operation) brand: NEUE HERBOLD, D-74889 SINSHEIM consisting of: Wet-granulator type SM 450/600-S5-2 Friction washer type FW 560/3000 Conveying screw Floating tank (Floating - sink separation) type TB 500 Mechanical Dryer type TM 1005 Suction Unit type MFT 55/500 Electric control

Year of construction: 2000, condition: refurbished (used), • Manufacturer: SICA • Type : C800 • Year : 2000 Codpfxjix I I Ij Aa Nepw • 6 caterpillar • Up to 800mm • Motor power : 8,5kW • Great condition

Condition: used, Year of construction: 1999, functionality: fully functional, total length: 2,000 mm, total height: 1,700 mm, total width: 1,700 mm, overall weight: 800 kg, Film packaging machine with shrink tunnel. Cedpfx Aaewr Apfe Nopw The BVM Brunner Compacta 4010 is a fully automatic side-sealing packaging machine for packaging products in semi-tubular film. It seals the film on three sides and achieves up to 100 cycles per minute. The machine is particularly suitable for the book, textile, and shipping industries, processes various types of film, and can be quickly adjusted to different product sizes. Ideal for efficient and flexible packaging. No guarantee for technical specifications. The machine is checked and cleaned. EXW. On request, we also offer service and installation of the machine.

Year of construction: 2006, condition: good (used), Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film Cpjdpopaiaijfx Aa Now 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg

Condition: like new (used), functionality: fully functional, Roller shutter - extrusion die set - complete, die head with heating element and calibration tool * die connection currently for Weber CE7 but other mounts available on request - double strand 2x 5m/min - roller shutter cover width 52mm Cpsdpfx Aexgpbbja Now - fully retracted - includes mounting plate (as shown) to fit on calibration table

Condition: used, Year of construction: 1994, Film width: 1500 mm Thickness range: 25-200 Dosing system: Summit Garvimetric Cjdpfx Aewgcw Sea Nopw Screw: 90 mm Heating zones: 5 Heating power: 64 kWt approx. Driving system: D.C.11-110 KW Power: 415 Die head: fixed Diameter die head: 350mm Diameter of the gap: 1.25 to 2.25 IBC – yes Air ring type: optifil Die lip gap diameter: 2-50 Calibrating basket: yes with Ultrasonic control Motorized adjusting of calibrating basket in diameter / high: yes Take-off system: Oscillating Number of rolls: 2 Web guiding system: Yes Final roll width: 1650 mm Final roll diameter: 1000 mm Final roll maximum weight: 1 t Rewinder speed: 100 Thickness Control System: Optifil Micro perforator: no Filter changer: Yes(hydraulic) Electrical requirements: 400 A PLC: Siemens Simatic S5-100 U Trim removal system: Rollers Yes-Extract No

Condition: good (used), Strech film machine Brand:Nissen Type:2400 Cjdpfx Aaep T Tz Ae Njpw Serie no:1469 Year:1999 Techn info: Rotating plate 2400mm in diameter Max hight wrapping approx. 2000mm Total hight column 2450mm Stock no:2001830BXM

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 3200 0088, overall weight: 2,000 kg, total length: 7,300 mm, total width: 1,100 mm, total height: 2,000 mm, input voltage: 400 V, input current: 125 A, type of input current: three-phase, input frequency: 50 Hz, cooling capacity: 30 kW (40.79 HP), operating speed: 83 mm/s, Manufacturer IBT.InfraBioTech GmbH Art.-No. 3200 0088 Technical Data Condition: As new; little used from test series Functionality: Fully functional Year of manufacture: 2018 Connected load: 58 kW Cooling capacity, water connection on-site: 30 kW Conveyor belt length: 7,000 mm Conveyor belt width: 310 mm Infeed height: 55 mm Infeed width: 308 mm TECHNICAL DETAILS Application: Conveyor oven for curing in film bonding technology Component temperature: max. 100°C Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm Overall height without control cabinet: 2,000 mm Control cabinet (WxDxH): 1,200 x 600 x 2,100 mm Base frame made of stainless steel profile tube, height adjustable: ± 30 mm Conveying system Vacuum conveyor belt made of silicone, belt 310 mm wide Transport speed: max. 5 m/min Conveyor belt height: 950 mm ± 30 mm Belt infeed/outfeed openings (WxH): 308 x 35 mm Free area infeed: approx. 750 mm Cpodpswnm Ukjfx Aa Njw Free area outfeed: approx. 750 mm Conveyor belt operation: Continuous operation, adjustable up to max. 5 m/min, tracking regulation with light barrier safety system at infeed and outfeed. Loading and unloading are performed manually. Intended use The curing oven is a belt system for continuous operation with a feed speed of max. 5 m/min. Open areas at the infeed and outfeed sections are provided for loading and unloading components. The enclosed heating section houses 6 IR modules (height adjustable). The maximum component temperature is 100°C and serves to heat solvent-free adhesive between composite film layers. The return side of the belt, the rear sides of the IR modules, and the space above the heating modules are water-cooled. Components are held onto the conveyor belt by vacuum. The control cabinet is located separately from the machine outside the cleanroom. The system operates in a cleanroom according to EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The equipment is exclusively for the warming of film composites. Features - 6 adjustable infrared heating modules, each with 6 infrared emitters - 6 pyrometers for precise temperature control - PU conveyor belt for efficient material flow - Integrated control and regulation system - Height-adjustable stainless steel base frame - Vacuum conveyor belt - Cooling water distribution in the base frame (G1") - Water cooling for the belt return section and rear sides of IR modules - Mechanically lockable service doors - Operator panel mounted at the infeed on the left side - Control cabinet cooling unit, water connection on-site History This oven was intended for use in a cleanroom environment and was only used briefly for a test series. The oven was used for curing solvent-free adhesives between composite film layers.

Condition: used, AB3000, TQC, Automatic Film Applicator Model: AB3000 Condition: Used Cedpst H I Uasfx Aa Njpw

Condition: good (used), Year of construction: 2015, operating hours: 5,842 h, functionality: fully functional, machine/vehicle number: 2/362594/15, input voltage: 400 V, compressed air connection: 6 bar, input current: 25 A, input frequency: 50 Hz, nominal power: 13 kW (17.68 HP), Equipment: documentation/manual, This is a "Meurer Filmline CMB 600 machine", which is no longer in use due to a change in the product range. Shrink film packaging machine with shrink tunnel FILMline CMB 600 The machine is immediately available, has no defects, and is in excellent condition. The current operating hours are 5,842 hours. The dimensions of the machine can be found in the attached document. The machine has been serviced regularly and can be inspected if required. In addition, all original operation manuals (in German and English) as well as electrical diagrams are available in duplicate as folders. Banding performance: 35 products/min Bundle capacity range: 1x5 / 1x10 Product dimensions X/Y/Z min./max.: 120mm x 120mm x 70mm / 265mm x 125mm x 38mm Cedpfx Ajwxtktea Njpw Bundle dimensions X/Y/Z min./max.: 228mm x 265mm x 125mm / 350mm x 120mm x 120mm Machine dimensions X/Y: approx. 3300mm / 3020mm A video of the running production can be provided on request.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour. Cpjdpfx Aaswg Sgco New

Condition: good (used), Passage width: 370x230mm Codoukd Dljpfx Aa Nepw Belt length: 1200 mm

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: P251001170, Complete extrusion line for ABS/PP furniture edge banding from the renowned brand AMUT The line is in perfect technical condition, regularly serviced, and currently in operation. The set includes a spare screw, further enhancing its operational value. Line equipment: 1. AMUT EA 100 extruder 2. AMUT calender station with CLV 1200 roller conveyor 3. AMUT TRK 100 edge banding machine 4. AMUT edge winder 5. Calendar cooling unit with a complete set of hoses 6. Electrical control cabinets for the entire line Csdpfxexiu Npe Aa Nspw Material: ABS, PP (virgin + regrind) Working width: 700 mm (after side trimming) Nominal width: 1000 mm Thickness range: 0.5 – 2 mm Extruder: single-screw AMUT EA100 33D Extruder output: ABS: 320 kg/h PP: 350 kg/h Final product: 2 rolls, each 350 mm wide Line speed: up to 25 m/min Year of production: 2009 Technical condition: perfect, complete with spare screw

Year of construction: 2000, condition: used, functionality: fully functional, Polypropylene sheet processing / extrusion line for sheets up to 80 mm thickness x 1,200 mm width. No. 01 CNC machine with 8 tools, Siemens controlled, table size 2520x1700 mm No. 01 CNC machine with 8 tools, Siemens controlled, table size 2520x1260 mm No. 01 CNC machine with 10 tools, Osai controlled, table size 4,000x1,800 mm No. 01 PPH extruder for sheets width 1230 mm and integrated cutting unit No. 01 PPH mechanical/pneumatic welding machine for plates/frames No. 01 PPH pneumatic welding machine for frames No. 01 PPH hydraulic/pneumatic welding machine for handles Cpsdpfexwnb Isx Aa Nsw No. 01 PPH hydraulic welding machine for sheets width 3,000 mm No. 02 forklifts, each 2,500 kg capacity No. 01 PPH shredder, 100 kg/h No. 03 portable PPH extruders No. 02 vacuum lifters, 150 kg each

Condition: used, Year of construction: 2003, Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour The Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour shrink-wraps products efficiently. Consequently, its fully automated structure and production capacity of 1200 bundles per hour ensure high performance. Technical and Functional Specifications The Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour operates with a continuous motion system, thereby maintaining a steady production flow without interruptions. Moreover, the wrapping process applies shrink film, effectively packaging bottles, cartons, and other containers. In addition, the system supports high-speed production lines, thus minimizing downtime and optimizing operational efficiency. Furthermore, the machine incorporates a straight inline feed system, which allows it to adapt to different conveyor speeds while integrating seamlessly with other machinery in the bottling line. As a result, this configuration simplifies integration into existing plants without requiring complex structural modifications. Shrink Film Characteristics In particular, the Used Shrink Wrapper Tetra Pak  applies standard shrink film, thereby eliminating the need for printed film support. As a consequence, this design increases flexibility in packaging material selection and significantly reduces operating costs. Therefore, the machine remains suitable for diverse industrial applications. Bundling Capability Notably, the bundling system of the Used Shrink Wrapper Tetra Pak creates packs with or without trays, depending on the chosen configuration. Additionally, the machine accommodates various container formats, including bottles, bricks, and cartons, thereby providing high flexibility in production management. Since it runs at 20 bundles per minute, the system efficiently delivers 1200 bundles per hour, making it an excellent choice for high-production plants aiming to optimize workflow. Consequently, businesses can enhance their operational throughput significantly. Shrink Tunnel The Used Shrink Wrapper Tetra Pak includes a high-efficiency shrink tunnel, which ensures uniform sealing and tightening of the film around the bundle. Additionally, the system regulates temperature control, thereby guaranteeing optimal shrinkage without damaging packaged products. As a result, this feature preserves packaging quality and minimizes production waste effectively. Cedpfx Aaev Ew Iwo Njpw Operating Conditions and Safety of the Used Shrink Wrapper Tetra Pak At present, the Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour remains in storage condition, thus making it ready for reinstallation and operation. Furthermore, the system incorporates safety devices that protect operators during use, thereby minimizing accident risks and ensuring compliance with industrial regulations. Manufactured in 2003, the Used Shrink Wrapper Tetra Pak continues to provide an efficient, robust, and easily integrable packaging system. Moreover, its modular structure and compatibility with various packaging materials make it a versatile solution for multiple sectors in the food and beverage industry. Ultimately, this machine enables companies to optimize their packaging operations while maintaining high standards of safety and efficiency

Year of construction: 2011, condition: like new (used), Extrusion machine for T-pieces used in the production of flue pipes made of stainless steel or other materials. Diameters supplied with the machine: 80 / 100 / 110 / 125 / 140 / 150 / 180 / 200 / 230 / 250 / 300. Machine in excellent working condition. Cpjdpfow E Iv Dsx Aa New

Year of construction: 2015, condition: excellent (used), The Cyklop CST 940 is a fully automatic stretch wrapping machine that ensures fast and reliable pallet wrapping at high volumes. Beneath the casing is an Atlanta Stretch Mytho A – a model renowned for its robust construction and dependable operation. With a capacity of up to 45 pallets per hour, it is an excellent choice for logistics centers, warehouses, and production facilities seeking to combine efficiency with operational reliability. Thanks to its minimal use and pristine condition, the machine gives the impression of being brand new, but comes at the price of a pre-owned unit. Cpedpfx Aasw U Rd Uj Njw Operation is simple via a user-friendly 5.7” touchscreen featuring multiple program selections, and the machine can be customized for different load formats and wrapping requirements. With adjustable speeds for both the rotary arm and film carriage, as well as various pre-stretch levels, a flexible solution is created, delivering high performance and secure, stable packaging. The solution can be adapted and extended upon request, as additional conveyor sections of the same model can be offered. Compressed air required. Freight and installation, if applicable, are not included.

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Filling opening (W x H): 1550 x 1000 mm Drive power: 31.5 kW Cedev Amw Nepfx Aa Nspw Pressing force: 60 t Bale weight (depending on material): 350–600 kg Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Pressing/cycle time: 13/24 s Machine weight: 7000 kg

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: C2401317M, warranty duration: 12 months, For sale: automatic industrial pallet stretch wrapper. The machine is brand new, unused, and has never been unpacked from its original packaging. Available immediately, as it comes from a cancelled project. This is an excellent opportunity for companies looking for an efficient and reliable automation solution. Technical specifications of the wrapper are provided in the attached PDF. Main images are for reference only. The unit is sold packaged on the manufacturer’s pallet. Installation support can be offered. Csdpfew Nn Tcsx Aa Nepw