Used Body Press for sale (24,051)

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge Bedpfxozvz Tbo Ab Dswt - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: excellent (used), Year of construction: 2020, Baling press, MACFAB, – used –: Bodezxciijpfx Ab Dswt Price ex works: €13,500.00 (net)! Manufacturer: MACFAB Systems Ltd Type: BMF650 Auto HT RAL - MM9.8 Year of manufacture: 01/2020 Serial number: MF J144 Weight: 1770 kg Operating hours: approx. 16h Automatic operation & "Bale ready" indicator Horizontal door that pivots to the side Surface / Color: RAL6018 Feed opening: 1,500x880x769mm (WxHxD) Dimensions, press: 2,100x1,524x3,217mm (WxDxH) Former new price: €18,921.00 Condition: The machine was only used once for testing purposes. Available: immediately Location: 72336 Balingen

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, power: 9 kW (12.24 HP), input voltage: 380 V, pressing force: 100 t, stroke length: 300 mm, operating speed: 9 mm/s, reverse speed: 71 mm/s, table width: 90 mm, table height: 900 mm, throat depth: 520 mm, ram plate length: 3,060 mm, distance table to ram: 500 mm, clearance between the columns: 2,620 mm, oil tank capacity: 200 l, total length: 4,220 mm, total width: 2,335 mm, total height: 3,010 mm, overall weight: 10,500 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, safety light barrier, CNC Press Brake COLLY BOMBLED PS 3000 LS 100/3 – 100 tons x 3,060 mm – 8 axes – DELEM DA66W We are offering this CNC press brake from COLLY BOMBLED for sale due to an upgrade of our machine park. This is our own production machine. We are a metalworking company and not a machine tool reseller. The machine is in very good working condition, has been regularly maintained, and has seen little use for its age, with only approximately 220,000 bends recorded. The machine can be viewed and tested in operation at our workshop in France. MAIN FEATURES Manufacturer: COLLY BOMBLED Model: PS 3000 LS 100/3 Year: 2008 Serial number: 085049 Pressing force: 1,000 kN / 100 tons Bending length: 3,060 mm Distance between uprights: 2,620 mm CNC control: DELEM DA66W 2D graphical Number of axes: 8 Number of bends: approximately 220,000 8-AXIS CONFIGURATION Y1 – Y2 X1 – X2 R1 – R2 Z1 – Z2 Motorized COLLY S3001 back gauge. CNC CONTROL DELEM DA66W with 2D graphical interface. Graphical programming of parts and bending sequences, axis management, bending table function, and visualization of bending operations. CONDITION / MAINTENANCE Machine regularly maintained. Hydraulic overhaul recently performed. Inspection and maintenance performed directly by COLLY BOMBLED. All guards and safety equipment are present. Machine is fully functional and available immediately. The sale is solely motivated by an upgrade of our machine park. TECHNICAL DATA Slide stroke: 300 mm Gooseneck: 520 mm Table / slide opening: 500 mm Table width: 90 mm Table height: 900 mm Approach speed: 100 mm/s Bending speed: 9.2 mm/s Return speed: 71 mm/s Motor power: 9 kW Approximate capacity for S235 steel over the entire length with V = 10 x thickness: 5 mm. DIMENSIONS / WEIGHT Height: 3,010 mm Width: 2,335 mm Length: 4,220 mm Weight: approximately 10,500 kg LOCATION / LOADING Machine located in our Metal360 workshop in France. Machine can be viewed and tested in operation by appointment. The building allows for lifting and loading the machine directly onto the truck, which facilitates its removal. Operating video and additional photos available upon request. Price: €34,900 (excluding VAT) Bjdpfxezybffe Ab Dowt Machine available immediately.

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm Bodpfx Abew Nafke Djwt - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: used, mileage: 315,398 km, power: 125 kW (169.95 HP), first registration: 01/2021, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 03/2027, color: beige, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, soot filter, Accident damage, driver's side. Body: Body/superstructure: New KA L2H2, Bwedpfx Abezxkd Ij Dot * Webasto refrigeration unit Diavia frigo 4000, * 1 row of anchor rails, * Anti-slip floor, Equipment: * Air conditioning, * Comfort driver's seat with heating and lumbar support, * Double passenger seat, * Rear door (opening angle 270 degrees), * Fuel tank: main tank 93 liters, Technology: * Multimedia system MBUX (7" touchscreen), * DAB tuner (digital radio reception), * Bluetooth, * Reversing camera, * Outside temperature display, * Electrically adjustable and heated exterior mirrors, * Power assist for sliding door on the right, Safety/Environment: * Airbag, driver's side, * Traction control system (ASR), * Driver assistance system: breakdown management, * Driver assistance system: crosswind assist, * Suspension: stabilization level II, * Mercedes-Benz emergency call system, * Low emissions according to emission standard Euro 6d-TEMP, * Start/stop system, engine, Other: German initial delivery, * 1 previous owner, * Engine 2.0 L - 125 kW CDI CAT, * Wheelbase 3665 mm, * Truck registration, * Permissible total weight 3.50 t * COC certificate available, * Damage on the driver's side, Since 1972, your reliable partner for all things automotive/commercial vehicles in 28832 Achim, at the Bremer Kreuz. Behnke Commercial Vehicle Center always has approximately 200 vehicles in stock, including vans, commercial vehicles and construction machinery! We continuously offer attractive financing options at favorable special conditions. If you are interested, we will be happy to create a customized offer for you! We welcome the trade-in of your commercial vehicle/construction machinery. If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional fee. The information provided in advertisements, on the internet, on price tags and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may need to be checked separately. Errors and prior sale are reserved.

Condition: ready for operation (used), Year of construction: 2009, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2009 Pressing force: 532 kN Bwedpfx Aozuxv Deb Det Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening: 119.5 x 65 cm Condition: very good! Video of machine in operation available on request.

Condition: used, Year of construction: 2001, Short-cycle pressing line Manufacturer: Wemhöner Type: KT-F-1E Bsdpfxezuzi To Ab Dowt Year of manufacture: 2001 Technical data - Pressing area: 5,750 mm x 2,200 mm - Operating side: left - Plate dimensions: Length: 2 x 2,600 mm - 2 x 2,620 mm Width: 2,070 mm Thickness: 6 mm - 40 mm - Pressing pressure: approx. 40 kg/cm² Note: Upon request, the complete layout plan of the system can be sent. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. Bwsdpjzuzw Dofx Ab Dot The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Year of construction: 1996, condition: used, Baling press Manufacturer: HSM Type: 55.1VL Year of manufacture: 1996 Technical data Bedpezuz D Refx Ab Dowt - 4.0 kW motor - 18 t pressing force - 400 V / 50 Hz Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Year of construction: 2012, condition: used, Membrane press Manufacturer: Columbus Type: Vakuform Sonder Year of manufacture: 2012 Technical data - Must be connected to an external vacuum pump - 750 watts, 230/380V, 50 Hz - Boiler capacity: 200 l - Suction capacity: 25 m3/h - Vacuum: max. 0.85 bar - Working area: 2000 x 1350 mm Note: Bedpfx Aozuz Ebsb Dowt The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2013, condition: used, Membrane press Manufacturer: Columbus Bwsdpfx Aozu Amyjb Dot Type: Vacuum forming Year of manufacture: 2013 Technical data - Working area: 1980 x 1350 Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, power: 162 kW (220.26 HP), first registration: 11/2014, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,850 mm, fuel: diesel, color: other, emission class: euro6, number of seats: 3, total length: 9,050 mm, total width: 2,540 mm, permissible axle load (axle 1): 4,400 kg, permissible axle load (axle 2): 8,400 kg, Year of construction: 2014, Technical information Number of cylinders: 4 Engine capacity: 4.580 cc Max. front axle load: 4400 kg Max. rear axle load: 8400 kg Weights Empty weight: 6.245 kg Carrying capacity: 5.845 kg GVW: 11.990 kg Maintenance APK (MOT): tested until 11/2026 Financial information Price: On request Bjdpfxozvp A Rs Ab Djwt Identification Registration number: 30-BFJ-1 = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, mileage: 187,000 km, power: 188 kW (255.61 HP), first registration: 11/2021, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,900 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 10,400 mm, total width: 2,550 mm, permissible axle load (axle 1): 5,000 kg, permissible axle load (axle 2): 8,480 kg, Year of construction: 2021, Equipment: ABS, navigation system, tail-lift, Technical information Number of cylinders: 6 Engine capacity: 7.698 cc Front axle: Max. axle load: 5000 kg; Tyre profile left: 40%; Tyre profile right: 40%; Suspension: leaf suspension Rear axle: Double wheels; Max. axle load: 8480 kg; Tyre profile left inner: 80%; Tyre profile left outer: 8%; Tyre profile right outer: 80%; Tyre profile right outer: 80%; Suspension: air suspension Bjdpjzvd Dpofx Ab Dswt Weights Empty weight: 8.104 kg Carrying capacity: 3.896 kg GVW: 12.000 kg Maintenance APK (MOT): tested until 11/2026 Financial information Price: On request Identification Registration number: 49-BSG-5 = Additional options and accessories = - Lat to lath timbered - Radio - Roof and side spoiler - Spotlights = Remarks = Comfort cabine 2x Air suspended seat Type 2 tacho Hardwooden floor Isolated roof Volvo dealer maintained

Condition: used, maximum load weight: 13,260 kg, overall weight: 16,000 kg, first registration: 01/2002, loading space length: 7,320 mm, loading space width: 2,470 mm, loading space height: 2,475 mm, loading space volume: 44 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2002, Chassis No. G0124487_1 – Manufacturer: Krone. * Simple corner brackets * Roll-up door (aluminum) * Forklift accessible * Fixed support legs * Device for rail loading * Lashing points Bwjdpoztuknefx Ab Dst Storage container: Weatherproof, secure closure, floor in good condition, no further repairs required. Delivery time: IMMEDIATELY AVAILABLE. Technically ready for use, no further repairs needed. Substructure with signs of use, some surface rust. Isolated paint chipping on components of the swap body. Isolated surface rust on components of the swap body. Dimensions are approximate. Offer subject to change; interim sale reserved. Prices are net, ex works D-59302 Oelde. Further details upon request, please contact us by phone or email.

Condition: used, total length: 1,250 mm, total width: 2,100 mm, total height: 3,300 mm, Colour: Green Empty weight: 7.000 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Press model: C-Frame press - Press configuration: Single-acting - Press force [ton]: 100 - Min. stroke [mm]: 20 - Max. stroke [mm]: 140 - Table length [mm]: 580 - Table width [mm]: 780 - Ram width [mm]: 400 - Throat depth [mm]: 315 - Max. opening height [mm]: 560 - Height adjustment [mm]: 70 - Pressing speed [mm/s]: 360 - Transport dimensions: 1250mm x 2100mm x 3300mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Bwsdpozrxr Tefx Ab Det Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1967, total length: 2,000 mm, total width: 1,750 mm, total height: 2,850 mm, Colour: Grey Empty weight: 6.000 kg - Year: 1967 - Documentation available: No - CE certificate present: No - Serial number: 1166 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 Bwodpfx Abszry Ice Djt - Max. stroke [mm]: 250 - Table length [mm]: 740 - Table width [mm]: 500 - Ram length [mm]: 250 - Throat depth [mm]: 350 - Transport dimensions: 2000mm x 1750mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1982, Heidelberg GTO 46, 1 color, standard dampening system, +Version. 33 x 46 cm. Bsdpezv U Ulofx Ab Dowt If you are interested, we would also be happy to provide you with information about other machines in our inventory. You are cordially invited to inspect the machine at our premises, subject to prior appointment.

Condition: used, Year of construction: 1990, ONLY numbering unit from a GTO 46 or 52. Available for both machines. The image is a sample photo. Can be purchased as a package or as individual parts. If you are interested, we will also be happy to provide you with information about other machines in our inventory. You are cordially invited to inspect the machine at our facility after prior arrangement of an appointment. Bwodezv U Urspfx Ab Det

Condition: excellent (used), Year of construction: 1996, Toggle Press Schling Bodpfxszwkpbo Ab Dewt Pressing force 60KN (6000 kg) Stroke adjustable from 0 to 25 mm Very clean and in very good condition

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, pressing force: 100 t, stroke length: 400 mm, table width: 1,200 mm, table length: 2,550 mm, clearance between the columns: 650 mm, total length: 1,400 mm, total width: 3,000 mm, total height: 1,930 mm, overall weight: 3,400 kg, This OTT veneer press from the Junior series, model 2512, with 6 pressure cylinders, is a classic hydraulic heated platen press for carpentry and woodworking. It has been completely overhauled by the Ott factory. Bodpfozv U Hzjx Ab Dswt 6 hydraulic pressure cylinders ensure extremely even pressure distribution over the entire surface, which is particularly important for demanding veneer work to prevent bonding errors. The use of 6 cylinders (instead of the often standard 4 cylinders for this length) minimizes the deflection of the press plates. This also allows for the pressing of smaller workpieces with high specific pressure without the plates warping. It is equipped with electric aluminum heating plates (gold anodized). The machine is connected and can be tested. Sale B2B without warranty/guarantee.

Condition: used, mileage: 127,000 km, power: 114 kW (155.00 HP), first registration: 01/1998, fuel type: diesel, overall weight: 7,500 kg, next inspection (TÜV): 08/2027, color: silver, gearing type: mechanical, emission class: euro2, number of seats: 2, total length: 9,100 mm, total width: 2,550 mm, total height: 3,580 mm, loading space volume: 17 m³, loading space length: 6,900 mm, loading space width: 2,400 mm, loading space height: 2,360 mm, Equipment: parking heater, Complete hair salon on a 7.5-ton truck. Fully equipped and used extensively until recently. This is the 2nd unit of the original "1st mobile hair salon," also available from us, which was invented and built in southern Germany in the 1990s. This truck is ideally suited as a mobile hair salon during major renovation or refurbishment work on your own hair salon. Another business model would be renting it out. The buyer of the truck will also be assigned the patent, granting them the exclusive right to use this specific vehicle for commercial purposes. However, the patent cannot be transferred to other vehicles/objects. The MAN has a large box body, originally a refrigerated vehicle. Therefore, it is thermally well-insulated. Air conditioning is provided by a mobile air conditioning unit with remote control. In addition, there is an electric heater. 4 customer/hairdresser stations with height-adjustable swivel chairs, arranged at a slight angle. Plus 1 separate washbasin at the rear. In fact, there is plenty of space everywhere to work, so several professionals can cut multiple customers' hair simultaneously without constantly getting in each other's way. The salon is completed by a reception desk, coat rack, magazine rack, as well as several small cabinets/drawers and sales shelves. The main work area is approximately 5.90 m long. In front of it is a separate area of approximately 1.00 m with a washbasin for the employees. This area also houses the hot water boiler and the fuse box, as well as shelves and storage space. There are also 2 hair dryers, which are, of course, included in the offer. The overall dimensions of the box body, interior approximately: 6.90 m long (5.90 m main area plus 1.00 m separate area), 2.40 m wide, 2.36 m high. Overall, the box body has a remarkably spacious feel - for both customers and employees. This mobile hair salon has approximately 17 square meters of total space. The salon can be accessed via an aluminum staircase, which is permanently mounted on the rear right and can be folded down slightly. The matching handrails, which are on both sides, are currently lying on the floor inside the box body for transport, see photos. Large storage boxes under the box body contain connection pieces for electricity, water supply, and wastewater drainage. The vehicle must be connected to external supply lines for operation. Bwsdpfjzwrtuex Ab Dot A 230-volt system is installed inside. The external power connection is made via a 32A plug. The truck chassis is a solid MAN 8.163 LLC from the then very modern and comfortable L2000 series. Four-cylinder diesel engine with 4580 ccm, Euro 2 and manual transmission. Wheelbase: 4900 mm. An analog tachograph is installed. The top speed is 98 km/h, but the permitted speed in Germany is 80 km/h. Unladen weight 7000 kg according to the documents, permissible total weight 7500 kg. According to the vehicle documents, the current registration type is "Other Motor Vehicle - Hair Salon Truck". When operating the business, this truck may be exempt from tolls. The MAN has leaf springs at the front and air suspension at the rear with a raising and lowering function at the driver's seat. The tires, size 215/75R17.5, all have a nearly new tread depth. A spare tire is mounted on the frame. The entire truck has only covered 127,000 kilometers. The vehicle was deregistered in August 2026. The TÜV (German technical inspection) was renewed in August 2026 and is valid until 08/2027. C

Condition: used, axle configuration: 1 axle, permissible axle load (axle 1): 9,000 kg, loading space length: 13,550 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, total length: 13,850 mm, total width: 2,600 mm, total height: 3,660 mm, wheelbase: 9,460 mm, color: white, Year of construction: 2020, General information Year of manufacture: 2020 Mileage: 387.000 km Technical information Power: 213 kW (290 HP) Number of cylinders: 6 Bwjdpfxozvl Shs Ab Dst Engine capacity: 6.871 cc Type of fuel: Diesel Transmission: Automatic Max. rear axle load: 9000 kg Weights Empty weight: 7.410 kg Carrying capacity: 16.590 kg GVW: 24.000 kg Environment Emission class: Euro 6 Maintenance APK (MOT): tested until 11/2026

Condition: used, Year of construction: 1964, total length: 2,100 mm, total width: 1,500 mm, total height: 1,850 mm, Colour: Green Weight: 2.500 kg - Year: 1964 - Documentation available: No - CE certificate present: No - Serial number: 13120 - Drive system: Conventional Bodpfx Abozc Irro Dowt - Number of axes [pcs]: 1: Y1 - Press force [ton]: 50 - Max. working width [mm]: 2000 - Backgauge depth [mm]: 0 - Punch holder: Fixed - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 2100mm x 1500mm x 1850mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, mileage: 86,382 km, power: 75 kW (101.97 HP), first registration: 11/2017, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,490 mm, fuel: diesel, CO₂ emissions: 198 g/km, fuel tank capacity: 75 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 7,000 mm, total width: 2,100 mm, total height: 2,910 mm, loading space length: 4,290 mm, loading space width: 2,030 mm, loading space height: 400 mm, Year of construction: 2017, Equipment: ABS, central locking, electric window regulation, electronic stability program (ESP), onboard computer, power assisted steering, start-stop system, General information Number of doors: 2 Model range: Dec 2016 - Aug 2019 Cab: single Technical information Torque: 300 Nm Number of cylinders: 4 Engine capacity: 1.968 cc Top speed: 134 km/h Measures length/height: L4H1 Weights Empty weight: 2.051 kg Carrying capacity: 1.449 kg GVW: 3.500 kg Interior Interior: black Consumption Average fuel consumption: 7,6 l/100km (37 MPG) Urban fuel consumption: 8,2 l/100km (34 MPG) Extra urban fuel consumption: 7,2 l/100km (39 MPG) Maintenance, history and condition APK (MOT): tested until 01/2027 Number of keys: 1 (1 hand transmitter) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL Bedozvygaspfx Ab Dowt = Additional options and accessories = - Car kit - Co-driver's bench - Driver's airbag - Electrically operated front windows - Height adjustable driver's seat - Height adjustable steering wheel - Immobiliser - Loading floor - Remote central locking - Third brake light

Condition: used, mileage: 881,000 km, power: 330 kW (448.67 HP), first registration: 04/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2013, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Listing/Vehicle No.: MTG41BDF * Office: * WhatsApp: * Mobile: * Email: * Website: Rental of various trucks, tractor units, and trailers for short- or long-term hire. 7.5t units from €699.00 and 18t from €1,000.00 per month, available at short notice! Please contact us for details. 1x Mercedes Benz Actros 2545 Swap Body Chassis Year of manufacture: 04-13 * Chassis number: 1L754XXX * Mileage: 1,000 km * Euro 6 with AdBlue * Secondary water retarder * Wheelbase: 4,600 mm * Full air suspension * Lift axle * Trailer coupling * Air conditioning * L-cab BigSpace * Roll stability control * Lane keeping assist * Adaptive cruise control Bwjdpfoxvai Iox Ab Djt * Driver attention assist * Tire pressure monitoring system * Cruise control * Refrigerator * CD radio * Tyres: 315/70 R22.5 front axle * Tyres: 315/70 R22.5 drive axle + lift axle * German vehicle * TÜV inspection available upon request for an additional charge! Net price – Trade-in possible – Rental/Financing/Leasing brokerage available – Specifications, interim sale, typographical errors, and mistakes reserved! We deal exclusively with well-maintained German vehicles. Our services: all customs and export documents, Euro1 * Short-term registration / 5 days * Customs plates / 30 days * Vehicle delivery * Vehicle pick-up * Main inspection and safety test Our contact details and opening hours: * Office: * WhatsApp: * Mobile: * Email: * Website: * Monday - Friday: 09:00 - 18:00 * Saturday: by appointment