Used Bottle Filler for sale (1,862)

Condition: used, This is a LITTLE GEM glass bottle filler for 1 Pint milk bottles round format. The machine cuts and applies with heat sealing the aluminium cap that is done via a fords cutter and capper. This machine can do 1pint and 2 pints. The machine has been running until 2025 and can be sold either as is working condition or fully refurbished . The machine is driven by 1 single motor that is located at the bottom of the machine turning two gears one opposite to the other making this a very robust and easy to maintain system. Capacity: 2000 bottles per hour Aluminium Cutting: Fords systems Hfodoxzx S Sepfx Ab Ujr Format: 1 Pint Milk Bottles Sealing Device: Included Construction: Fully Stainless steel on product connection Parts Filling Type: Mechanical valves that the bottles lifts the rubbers up and the milk flows through, one the mechanical vacuum is activated this helps to avoid over Collection Table: Included Condition: Will be fully refurbished or As is

Year of construction: 1991, condition: used, Glass bottle filler and capper for filling beer as well as CO2-containing and non-CO2-containing soft drinks and capping with crown caps. Capacity: approx. 14 000 bph. Fomat parts for Euro, NRW, Longneck and Vichy bottles. Hodevcqi Nopfx Ab Uefr Additional title: 42 filling points Capacity: 14000 bottles/h Number of filling valves: 42 Voltage: 220/380 V Formats: Euro, NRW, Longneck und Vichy type bottles with crown caps Running direction: left -> right Operation / Control: Siemens S5

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: K123-636, Equipment: type plate available, Used bottle filler, KRONES 066-103/KK11-M from 1997 for sale • Output: 22,000 bph (0.5 L bottles) and 24,000 bph (0.33 L bottles) Specifications: Used Krones returnable glass bottle filler for beer and soft drinks Model: 066-103 • Year of manufacture: 1997, commissioned in 1997 • 66 filling valves / 11 capper heads, short filling tubes • Clockwise rotation (L-R), diameter 2,880 mm • Double evacuation, splinter washer • Crown cork handling • Capacity for 500 ml bottles: 22,000 bph • Currently configured for 500 ml and 330 ml bottles, with format parts available for changeover Previously part of a multiblock with labeller station, which is no longer included. Filler control system: Siemens S5 (updated 2009) Products filled: beer, alcohol-free beer, long drinks, cocktails, cider, soft drinks, carbonated water, still water Maintenance: Labeller deblocked in 2009 Hfjdpfoxp I Apex Ab Ujr Regularly maintained by KRONES throughout its life—especially filler valves and components In production until 01/2026

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, tank capacity: 1 l, controller manufacturer: Siemens, TECHNICAL DETAILS Filling volume: 0.1 - 1.0 liters Filling medium: for example sauces, dressings, spirits, dressings or mayonnaise Filling method: below-level filling to reduce foam formation Performance: 6,000 bottles per hour (at 250 ml) Filling stations: 16 Closure elements: 4 Control: Siemens Container compatibility: plastic and glass bottles Direction of travel: left to right EQUIPMENT - Filler - Capper - Cap sorting unit Hodpfx Aov Hp Swsb Usfr - Cap feeder

Year of construction: 1990, condition: good (used), Krones Filler Beer Glass Bottles, 24 valves, 6 head capper crown corker, Year: 1990, with Siemens S7, Pre-evacuation, Vacuum Pump, for 33cl Logneck, 33cl Steini, 75cl, 250 ml + 330 ml + 750 ml Hfsdpfx Abet Akfts Ujr

Year of construction: 2025, condition: new, The filler is made of stainless steel (AISI 304). The storage tank is located on top of the filler and can be connected directly to a pasteurizer using the DIN 25 connection. The electrical control unit is mounted on the side for easier operation. The bottle filler and the bag-in-box filler are connected to each other via two separate valves and can be used together or separately. Bag-in-box filler: semi-automatic model IBB 200, with stainless steel induction liter counter. Filling system without gravity. Volumetric pump 1.1 KW with flexible EPDM impeller. Touch screen operation for cycle setting, parameters and cleaning. Vacuum and nitrogen injections are freely adjustable in the cycle. The built-in air compressor ensures continuous operation. Hfodpjtpxuvjfx Ab Uor Technical data: Bag in Box Electrical requirement: 1.1 220V 50-60 Hz Suitable for: Ø 20 - 25 mm Capacity: 5 L/h 240 pcs. Capacity: 10 L/h 180 pcs. Capacity: 20 L/h 130 pcs. Collection tank capacity: 1500-1800 kg/h Dimensions: 600x820x1600 mm Weight: 120 kg Filling system without gravity Capacity of the collection tank: 45 L Capacity: 670 L/h Dimensions: 580x1800x1500mm Weight: 45 kg Take a look at our website!

Year of construction: 1985, condition: not inspected (used), PET-Filler, with 112 Filling valves, with 120 mm pitch, with 14-head screw capper make Alcoa für PCO 28 caps, already dismantled ex location for sale. Hodpfx Aeh Nq Tksb Ujfr

Condition: used, Year of construction: 1994, Combined bottle filler with labeller ‘Krones Bloc’ Additional title: Monobloc arrangement Capacity: 7000 bo/h Hfedpfexb Ahwsx Ab Uer Power: 38,1 KVA Current: 55 A Voltage: 230/400 V Frequency: 50 Hz Formats: 0.5 litre NRW (belly/neck/back), 0.33 litre Steinie (belly/back), 0.33 litre Longneck (belly/neck/back) Running direction: left -> right Operation / Control: Siemens S 5 Position: free standing Features: Labeller Universella Periphery: miho inspection device

Year of construction: 2024, condition: new, The manual bottle filler is specially easy to use. The filling mechanism works on the basis of gravity. The handle is pulled down and the strong stream of liquid flows out of the head. Capacity – 600 pcs. of 0,5 L bottles per hour. The bottle filler is completely made of stainless steel. Hfedpfxeizbb Ho Ab Uer Gravitational mechanism provides a strong stream as well as easy and effective work. Comes with a buffer tank for fluid. Buffer tank has an integrated flowmeter which helps to follow the liquid level on the buffer tank. Suitable for various liquids that are similar to water consistency such as juice, wine, vodka, etc. Mounted on the pivoting wheels.

Condition: good (used), Year of construction: 2013, operating hours: 1,000 h, Beer Filler, Counterpressure, Vipoll GEA, Type: Visipraktik VKR-ES-DN 12-3K, Year: 2013, capacity max. 3.000 bph, adjusted to 330 ml, double pre-evacuation, low operating hours, less than 1.000 hours, bottle diameter 50 - 105 mm, bottle hight 125 - 370 mm Hodpeq H Eamsfx Ab Uofr Optional: Set of bottle conveyors, rotating table

Condition: used, Bottle filler, make BKM, type: Varifill 40/10K/10PP-100, for 12.000 bph, with 40 filling valves, with 10-head crown Hfedpsrxuwkefx Ab Uor capper and 10-head screw sealer (for MCA 28 caps), with double pre-evac, runs on 0,33 lt Longneck- and 0,5 lt NRWbottles, direction: left->right.

Condition: used, Year of construction: 2021, Gravimetric short-tube glass bottle filler with 16 filling valvesand crown cork capper. Controlled via Eaton PLC. Additional title: gravity filling and crown cork capping Capacity: 2800 bo/h max. filling volume capacity 2,200 l/h Hodpfx Aoxbpcheb Uofr Power: 4,5 kW Voltage: 380 V Frequency: 50 Hz Compressed air: 14,4 Nm³/h, 5 - 6 bar, 8 mm connection Length: 2,30 m Width: 1,42 m Height: 2,50 m Weight: 1800 kg Formats: Longneck 0,33 l, Vichy 0,33 l, Steinie 0,33 l, Belge 0,75 l - crown corks 26 mm Operation / Control: SPS Eeton Features: 16 filling valves, 1 capping head, beer connection clamp DN32

Condition: excellent (used), Year of construction: 2015, operating hours: 18,412 h, Glass Bottle Filler, Beer filler, Counter pressure, Isobaric, Made by Kosme Krones, Type: Barifill 30-6, Year: 2015, Capacity 7.000 - 8.000 bph, adjusted to 0,33 - 0,50, 330ml - 500ml, 33cl - 50cl, 26 mm crown cork, Siemens S7, vacuum pump. Hfjdpfxjv N E Iae Ab Uor

Condition: good (used), Year of construction: 1994, Fillerblock, make Nagema, type: Varifill 40/10K/10PP, for 12.000 bph, with 40 filling valves, with 10-head crown capper and 10-head screw sealer (for MCA 28 caps), with double pre-evac, runs on 0,33 lt Longneck- and 0,5 lt NRW-bottles, direction: left->right, Siemens S5 control, built 1994 Hfodpfx Abjn D Hm Se Uer L: 4.000 mm, W: 2.700 mm, H: 2.800 mm

Condition: used, Year of construction: 1984, with 24 filling valves, frequency-controlled drive. Height adjustment for different bottle sizes. With vacuum supply to the filling vessel by vacuum blower. For filling, the bottles are first lifted via a hydraulically controlled bottle carrier and pressed against the sealing cone on the filling valve. The valve sleeve moves as far as it will go in the valve body, opening the product outlet. The air inside the bottles is discharged through an air tube, creating a vacuum in the bottle equivalent to the vacuum above the product level in the container. The product flows into the bottles by gravity until the fill level reaches the air tube. The bottle is then lowered and the product outlet is closed. Additional title: hot filling Capacity of filling line: 5000 bo/h Hsdpow Tmmvsfx Ab Uofr Number of filling valves: 24 pcs Length: 1,64 m Width: 1,20 m Height: 2,10 m Formats: Round bottles, diameter 60 - 92 mm, height 100 - 265 mm Running direction: left -> right Features: 24 filling valves from stainless steel, height adjustment, vacuum blower

Condition: used, Year of construction: 2020, Monoblock for rinsing, filling and capping glass bottles. 1. Rinser: Rinsing tower with 6 grippers for single-stage rinsing of empty bottles. 2. Filler: Filling tower with 6 electro-pneumatic backpressure valves. 3. Capping machine: Stainless steel cap container with cap conveyor and capping head 4. Bottle exterior washer Additional title: Counterpressure filler with 6 filling valves, sealer with one sealing head Capacity: 1100 bo/h referring to 0,33 l bottles Filling temperature: 2 °C Length: 2,20 m Width: 1,90 m Height: 2,10 m Hjdpfsw Tbgdex Ab Ujfr Formats: Euro 0.5 l and 0.33 l; 26 mm crown caps Running direction: clockwise Operation / Control: Schneider Electric Base construction: Monobloc; Stainless steel housing on feet with plexiglass doors Features: Rinser with 6 grippers, filler with 6 filling valves, capper with one capping head, bottle exterior washer, beer pump, free bottle transport

Condition: used, Year of construction: 2000, Bottle filler Manufacturer: Krones Short tube filler with double pre-evacuation Model: Mecafill VKVP 084-094 Year of manufacture: 2000 The capper runs with twist-off and standard crown corks Additional title: Filling and Capping machine Capacity: 30000 Bottles/h Length: 7000 mm Width: 4500 mm Height: 3800 mm Formats: 0.5L NRW, 0.33L Vichy, 0.33L Euro, 0.35L Lemonade Machine partitioning: 84 filling valves, 12 cappers Hfodpow Tay Aefx Ab Ujr Running direction: right -> left Operation / Control: Simatic Material: mostly stainless steel Position: free standing Base construction: Square frame construction on domes Features: 1 capper for standard and twist off crown caps, 84 filling valves, 12 cappers, protective housing with glass doors, vacuum pump Periphery: Crown cap feed, fill level control,

Condition: used, Year of construction: 1990, Bottle filler for approx. 8000 bottles/h Hjdjw S T H Tepfx Ab Uofr Additional title: Filling and capping machine Capacity approx.: 8000 bottles/h Formats: 0.5 l Euro bottle, 0.33 l longneck bottle, 0.5 l goiter neck bottle Position: free standing Features: 1 pre-evacuation, short tube filling, crown cork capper

Condition: used, Year of construction: 1991, Additional title: 50,000 bo/h, crown caps Capacity: 50000 bph Formats: 0,33 l LongNeck bottles, 0,5 l NRW bottles; crown caps Running direction: rigth -> left Operation / Control: Siemens S5 Hfjdpovcqr Rofx Ab Uer Base construction: filling level filler with return air tube Features: 120 filling points, 24 sealing points, double pre-evacuation, high-pressure injection

Condition: used, Year of construction: 2018, REF: MM5446 Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Hjdpfox Dbkcex Ab Ujfr Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification ✅ Model - RMC10. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar.

Condition: new, Year of construction: 2024, functionality: fully functional, New filling machine suitable for dispensing liquids. Suitable for: - Milk - Water - Alcohol - Disinfectant - Etc. This is a very robust machine that runs on air and 220V power—plug and play! Ideally suited for filling small batches. Only a very small compressor is required to operate the machine, and one can be supplied if desired. We recommend a minimum compressor size of 12L. The filling machine comes with a 1000ml cylinder, allowing a maximum of 1000ml to be dispensed per cycle. By running multiple cycles, larger volumes can also be filled. For example, to fill 2500ml, you can run two cycles of 1250ml each. The smallest fill per stroke is 100ml, and any volume between 100ml and 1000ml can be achieved in a single cycle. We also offer models equipped with cylinders that can fill up to 5000ml per stroke. Equipped with a suction hose, enabling the machine to draw product directly from a drum or IBC. The machine includes both a foot pedal and an automatic mode. In automatic mode, continuous filling is possible, making it easy and efficient to process larger quantities. The foot pedal allows batch filling at your own pace. Depending on the operator and the fill volume, the machine is capable of filling between 15-25 units per minute, making it very fast and efficient. The machine weighs approximately 15/20kg and can easily be placed on a table. Constructed entirely from stainless steel, this is a very high-quality machine. For any questions, please email us. We are happy to assist you with this or other machines. We also supply a labelling machine that makes an excellent combination with the filling machine. We strive to respond to your inquiries within 24 hours. Of course, you can also reach us by phone. We are available on working days from 09:00 to 17:00. Hfjdpjrivxcjfx Ab Ujr

Condition: used, The TREPKO PKG 1 is equipped with a single stage of all station , the filling head are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Trepko cup fillers are mainly driven by a main motor converting the movement in an INDEX type gear box, signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request. The machine was used for filling Cheese in small rectangular cups, in regards of change overs to 71,75,80,95 mm OUTSIDE DIAMETER Cups we can offer this service in-house. Contact us for more information. Capacity: 2400 c/h (40cps per minute ) Filling volume: 50-500 gr Hfedpfxeuruf As Ab Ujr Prefilling: Fruits or flavours Cup dispensing: Automatic Lid applicator: Automatic Sealing: Automatic Out feed conveyor: Automatic E: 3 phase / 50 hz Control panel: PLC SIEMENS Cup format: Currently rectangular on order we can change to your cup size Loaction: IN STOCK Sale: The machine can be sold "as is " TLC Needed or Fully Refurbished. Contact us for more information.

Condition: used, Year of construction: 2002, TETRA PAK TBA 21-1000 SQUARE ASEPTIC FILLER YOM 2002 V050 Hfedpfxsx Agmyj Ab Usr 52.000 RUNNING HOURS CAPACITY 7000 CARTONS PER HOUR VERY GOOD CONDITION COMPLETED BY THE TCA88 1000 SQUARE APPLICATOR (SOME PARTS MISSED) DISMANTLED AND STORED IN POLAND, LASK CITY.

Condition: ready for operation (used), Can filler for several can sizes and formats suitable. For example for fish or meat cans or vegetables. Hjdpfx Abjvy Trhe Uefr

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: CDE:D09C236, CORIS /HERMES 9600 Vial Blower & Filler Line, made in France. Consisting: - a bottle pack blowing machine, with 2 formats (60ml and 30ml), - a HERMES 2009 filling machine with 2 drive rings 10 slots, - a cap dispenser, - laminar flow, Hfjdportnlaofx Ab Uor - spare parts, - belt conveyor 2200mm x 40mm, sold without peristaltic pump. YOM 2010 EXCELLENT CONDITION