Used Brade Machines for sale (65,641)

Condition: used, Year of construction: 1980, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: Universal bed-type milling machine Machine weight: approx. 11 tons Travel distances X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 630 mm Spindle and tool holder Gjdpfx Ako Aa Ahrehskd Spindle taper: SK 50 Speed range: 20–2,000 rpm Horizontal milling spindle: SK 50 Vertical milling spindle: SK 50 Feed rate and rapid traverse Feed rate: 10–6,000 mm/min Rapid traverse: 6 m/min Work table Table load: max. 5,000 kg Control system Control system: Philips NC 6664 Axes: 4 Program memory: available Rotary table Rotary table: NC-controlled Diameter: 630 mm Electrical data Total power requirement: 18 kW Control cabinet Control cabinet dimensions: 1,800 × 530 × 2,000 mm Dimensions Space requirement: approx. 4.6 × 2.9 × 2.62 m EQUIPMENT NC-controlled rotary table Hydraulic tool clamping Coolant system Chip conveyor Horizontal milling spindle Vertical milling spindle Separate control cabinet Safety emergency stop Important note: The machine vice, if visible in the pictures, is not included in the scope of sale and delivery!

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 133504, MACHINE DETAILS Dimensions (L x W x H): approx. 9,000 x 6,000 x 2,800 mm Gjdpo Ah Em Njfx Akhekd Voltage: 400 V AC Frequency: 50 Hz Fuse rating: 1,700 A Rated current: 150 A Power supply system: TN-S Supply pressure: max. 10 bar Operating pressure: 6 bar Compressed air connection: G ½ inch Compressed air quality: ISO 8573-1, cleaned and oil-free Ambient temperature: 10–45 °C Relative humidity: 20–80 % (without condensation) Noise level: < 78 dB(A) EQUIPMENT Suitable for operating environments with low dust and dirt levels, as well as oil vapors and humidity. Note: Further technical details can be found in the attached documents.

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS CONTROL Control system: SIDAC system control MAGNETIC CHUCK Magnet dimensions: 1,000 x 500 mm GRINDING WHEEL Grinding wheel diameter: approx. 350 mm Gode Adu Swepfx Akhjkd MACHINE DETAILS GENERAL Machine type: Surface grinding machine Manufacturer: Minini Model: JMF 1100CN Year of manufacture: 1992 Machine number: 1,000 DIMENSIONS AND WEIGHT Length: 5,000 mm Width: 2,400 mm Height: 2,700 mm Weight: 5,000 kg EQUIPMENT Diaform dressing device Important note: the clamping device shown on the magnetic chuck is not included in the sale and delivery!

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, production capacity: 3,650 unit/h, The system has been completely overhauled! TECHNICAL DETAILS Capacity: approx. 3,650 pieces/hour Round dough pieces (cut): 40–65 g Long-rolled dough pieces (cut and uncut): 40–65 g Dough piece weight in 3-row operation: 40–85 g Round/smooth dough pieces via pretzel discharge: 40–85 g Processable products Sliced rolls Round and smooth dough pieces Baguette rolls Hotdog buns Bread rolls EQUIPMENT Complete stainless steel design 3-row operation Gjdpfx Ae Agnwaskhjkd Pretzel discharge

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Imatec Type: BM153-G-M3 Gkedpfx Ako Ad Iwgjhjd Year of manufacture: 1974 Machine type: Tool milling machine SPINDLE Speed range: 10–510 rpm WORK TABLE Table dimensions: 1,100 × 260 mm Table slots: 3 Clamps: 2 CONTROL Digital display: 3-axis digital display, Fagor MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,500 mm Width: 1,500 mm Height: 1,800 mm Weight: 800 kg EQUIPMENT 3-axis digital display, Fagor Work table with 3 slots 2 clamps

Condition: used, Year of construction: 1987, machine/vehicle number: 6004.01, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: CNC-controlled precision cylindrical grinding machine Condition: fully mechanically overhauled Machine weight: approx. 3.5 t Work Area Grinding diameter: 350 mm Grinding length: 1,000 mm Center height: 175 mm Workpiece weight: max. 120 kg Spindle and Drive Drive power: 5.5 kW Speed: max. 25,000 rpm Control System Control system: FMS 5-88 EQUIPMENT Gkodpfxo Aa Anfj Akhsd Extensive range of accessories Coolant system Electronic handwheel Separate control cabinet Safety emergency stop

Condition: used, Year of construction: 2016, machine/vehicle number: 405329, Submitting a bid obligates you to collect the item on time, no later than December 23, 2026! Auction of a Beck MP 240X! Note: Accessories are sold as is, without warranty. The following applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site. Gkjdpe Agvqusfx Akhjd

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS PRESS DATA Nominal pressing force: 400 kN Stroke frequency: 800 min⁻¹ Ram stroke: 5–50 mm Ram adjustment: 50 mm MATERIAL DATA Material thickness: 1.5 mm Material length: 1–50 mm Strip cross-section: 110 mm (?) Material width: 10–75 mm Strip speed: 45 m/min MACHINE DETAILS Manufacturer: Haulick + Roos Type: RVD 32-720HS Machine type: Punching machine Year of manufacture: 1994 Machine number: 1829697 Operating voltage: 400 V Frequency: 50 Hz Drive power: 19 kW Length: 3,000 mm Width: 2,400 mm Height: 2,700 mm Weight: 4,000 kg EQUIPMENT Feeder GF50 Gkedj Aduyzepfx Akhsd

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 19991798, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel range, X-axis: 2,500 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 550 mm Spindle mount: SK 50 MACHINE DETAILS CNC control: Heidenhain Voltage: 400 V Frequency: 50 Hz Total connected load: 40 kVA Weight: 2,000 kg EQUIPMENT Siemens motors and servo drives Preparation for 4th axis (4th axis not included) Note: Without tools and clamping devices for the machine table & without mist extraction. Gkedpfxs Ahm Eye Akhsd

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Surface grinding machine TECHNICAL DETAILS Grinding area Grinding length: 760 mm Grinding width: 325 mm Distance from spindle center to table: 650 mm Grinding wheel Grinding wheel diameter: approx. 500 mm Magnetic chuck Magnetic chuck dimensions: 600 x 500 mm MACHINE DETAILS Godpj Ad Iufjfx Akhekd Manufacturer: Mägerle Type: MGC 180.32 Machine type: Surface grinding machine Machine number: 100369 Dimensions and weight Length: 5,000 mm Width: 3,000 mm Height: 3,500 mm Weight: 15,000 kg EQUIPMENT 2 electro-permanent magnetic chucks Important note: The grinding wheel possibly shown in the pictures is not included in the scope of sale and delivery!

Year of construction: 2006, condition: ready for operation (used), functionality: fully functional, overall weight: 4,900 kg, grinding length: 630 mm, center height: 140 mm, grinding diameter: 275 mm, machine/vehicle number: 0116, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between December 2nd, 2026, and December 3rd, 2026! TECHNICAL DETAILS Maximum height: 140 mm Circumferential diameter: max. 275 mm Grinding length: max. 630 mm Grinding diameter: max. 275 mm Workpiece weight: max. 250 kg Workpiece weight during chucking operations including clamping device: max. 40 kg Spindle taper: MK 5 Tailstock center: MK 4 Drive motor: 1.1 kW Spindle travel: max. 6 mm Speed: 0.06–10 mm/min Quill stroke: max. 32 mm Tailstock center: MK 4 Cylinder compensation: ±0.1 mm/diameter Division mark: 0.002 mm/diameter Table speed: 0.05–5 m/min Table travel: max. 810 mm Table dwell time at reversal points: 0–5 s Table adjustment per handwheel revolution in coarse mode: 20 mm Table adjustment per handwheel revolution in fine mode: 2 mm Automatic feed rate during longitudinal grinding: 0.001–0.06 mm/diameter Swivel range of the top slide: +11° 40′ / −5° If the swivel angle exceeds +11° 40′, the tailstock support must be removed. Quick traverse: 70 mm Feed: 100 mm Coarse adjustment: 355 mm Grinding wheel diameter: 500 mm Grinding wheel width: max. 100 mm Grinding wheel bore: 203.2 mm Drive power: 7.5 kW Grinding wheel peripheral speed: 35/50 m/s MACHINE DETAILS Grinding wheel diameter: approx. 480 mm Magnetic chuck diameter: approx. 250 mm Dimensions and weight Dimensions: 3,700 x 2,600 x 2,200 mm Weight: 4,900 kg Transport width: 2,500 mm EQUIPMENT Technical documentation Grinding wheel Magnetic chuck Various steady rests Gede Ai Sixopfx Akhskd Additional accessories

Condition: used, Year of construction: 2000, machine/vehicle number: VH20011, controller model: Heidenhain TNC 426, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS CNC control: Heidenhain TNC 426 Godpfs Ah Dtwox Akhekd Tool holder: SK 50 EQUIPMENT Rotary milling head Various tool holders Note: The machine is sold without tools.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: SN 018-0212, travel distance X-axis: 4,000 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 2,200 rpm, controller model: Penta-Tec, TECHNICAL DETAILS Travel range X-axis: 4,000 mm Travel range Y-axis: 580 mm Travel range Z-axis: 700 mm Speed range of drilling head: 140–2,200 rpm Drilling diameter: 3–32 mm Tapping range: M4–M24 Drive power of drilling head: 7.5 kW Gedpfx Aj Ah Eupokhokd Rapid traverse X-axis: 20 m/min Rapid traverse Y-axis: 6 m/min Rapid traverse Z-axis: 6 m/min Positioning tolerance X-axis: ±0.1 mm Positioning tolerance Y-axis: 0.06 mm Positioning tolerance Z-axis: 0.06 mm Distance from top of table to bottom of tool holder: 700 mm Tool holder: SK 40 Tool changer: 10 tool positions T-slots: M12 MACHINE DETAILS Control system Control model: Penta-Tec Touchscreen: 18 inches Handheld unit: RCS01 Clamping system Manufacturer: Polund – Pro-Clamp Systems Number of clamping points: 8 Rated apparent power: 12 kVA Total weight: 6,000 kg EQUIPMENT Servomotors for X, Y, and Z axes Touchscreen control Automatic tool changer Automatic tool length measurement Handheld unit RCS01 Software extension for pendulum operation DXF software package Hydraulic draw-in clamping system with universal control Light curtain on the front Articulated belt chip conveyor

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Pressing force: 30 t Table dimensions Length: 480 mm Width: 400 mm MACHINE DETAILS Manufacturer: Bruderer Type: BSTA 30 Machine type: Punching machine Condition: Refurbished Dimensions Gkedpfx Ao Adunrokhsd Length: 1,100 mm Width: 800 mm Height: 2,000 mm Weight: 3,000 kg EQUIPMENT Feed control

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, power: 63 kW (85.66 HP), overall weight: 5,260 kg, drilling depth: 122,000 mm, TECHNICAL DETAILS Traction force: max. 89 kN (approx. 9.1 t) Thrust force: max. 75.6 kN (approx. 7.7 t) Torque: max. 2,980 Nm Spindle speed: max. 225 rpm Drilling depth: approx. 122 m (depending on ground conditions) Pilot hole diameter: min. approx. 102 mm Drill string length: approx. 3,050 mm Drill string diameter: 52 mm Drill string connection diameter: 67 mm Drill string magazine capacity: approx. 122 m Drilling angle: 10–14° MACHINE DETAILS Engine: Cummins 4-cylinder turbo diesel Displacement: 3.3 l Engine power: 63 kW (approx. 85 hp) Flushing pump flow rate: max. 120 l/min Flushing pump pressure: max. 103 bar Fuel tank volume: 114 l Hydraulic oil tank volume: 72 l Dimensions & Weight Dimensions (L x W x H): approx. 5,260 x 1,310 x 2,390 mm Operating weight: approx. 5,260 kg EQUIPMENT Enclosed operator cabin with joystick control Hydraulic drill string changer with drill string magazine Hydraulic clamping and breaking device Integrated drilling flushing pump Hydraulic anchoring system Ditch Witch ESID warning system Electronic 750 display Rubber track undercarriage Godpfx Ae Ahxyaokhekd External cable control Drill string, partially stored separately Various drilling and reaming tools Drill string connections and adapters Accessory and tool box Operating manual JT2020 Mach 1 Spare parts manual JT2020 Spare parts manual FM13

Condition: excellent (used), Year of construction: 2007, operating hours: 81,000 h, functionality: fully functional, clamping force: 132 kN, screw diameter: 135 mm, injection pressure: 1,390 bar, injection weight: 7,729 g, KraussMaffei KM 1300-12000 MX + KUKA Robot! TECHNICAL DETAILS Clamping Unit Clamping force: 1,300 t Opening stroke / mounting height: max. 2,300 mm Distance between tie bars: max. 4,000 mm Mold mounting height: min. 1,000 mm / max. 1,700 mm Tie bar height: max. 1,910 mm Mold size: min. 1,000–1,700 mm Clear tie bar spacing: 1,500 mm Nozzle radius: R40 mm Mold weight: 29,000 kg Ejector stroke: 350 mm Injection Unit Screw diameter: 135 mm Displacement volume: 8,588 cm³ Injection pressure: 1,390 bar Gkedpfs Ah D Dyox Akhod Shot weight: 7,729 g PS MACHINE DETAILS Core pulls, ejector side / nozzle side: 1 / 1 Pneumatic needle closures: 1 Operating hours: 81,000 h EQUIPMENT KUKA robot

Condition: used, Year of construction: 1997, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Travel ranges X-axis: 710 mm Y-axis: 630 mm Z-axis: 500 mm Spindle and tool holder Spindle speed: 5–5,000 min⁻¹ Drive power of the working spindle: 11 kW Gksdpfs Aa Aqtex Akhjd Tool holder: SK 40 Tool changer Tool changer: 44 tools Feed rate Feed rate: 10 m/min Work table Clamping area: 1,200 × 600 mm Table load: 0.5 t Control system Control system: Heidenhain TNC 426 Performance data Total power requirement: 15 kVA Machine weight: approx. 4.24 t Machine design Guideways: Flat guideways on all axes Guideway protection: Scrapers and steel covers EQUIPMENT Tool changer with 44 tools Heidenhain TNC 426 control system Wired Heidenhain handwheel Flat guideways on all axes Scrapers on the guideways Steel covers for guideway protection

Condition: used, Year of construction: 1982, center height: 125 mm, grinding length: 650 mm, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Working area Grinding diameter: 250 mm Grinding length: 650 mm Center height: 125 mm Distance between centers: 650 mm Grinding length in plunge grinding: 80 (100) mm Grinding depth in internal grinding: max. approx. 170 mm Grindable bore: max. 90 mm Workpiece weight: max. 80 kg Distance between workpiece spindle and tailstock center: 960 mm Spindles Internal grinding spindle speed: 9,500–50,000 rpm Gkodo Aa Ai Ajpfx Akhod Grinding wheel diameter: max. 400 mm Spindle bore: 30 mm Workpiece tailstock can be swivelled: 90° Feed and table movement Workpiece table speed: 50–10,000 mm/min Feed rate: 240 mm/min Cooling Coolant consumption: 36 l/min Drive and power Spindle motor drive power: 6.25 kW Connected power: approx. 10 kW Total power consumption: 8.5 kW Machine data Machine weight: approx. 3.4 t Space required: approx. 3.9 × 2.5 × 1.85 m Control and drive Control: Studer Drive: electric / hydraulic Speed control: stepless EQUIPMENT Tailstock with fine adjustment and hydraulic retraction Workpiece tailstock with increased accuracy Table air lift Hydraulically foldable dressing device Radius dressing device Hydro-cyclone filter Automatic grinding wheel balancing device Automatic dressing cycle with speed compensation Internal grinding device

Condition: used, Year of construction: 1985, machine/vehicle number: 31268, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: universal tool milling machine Machine weight: approx. 6.6 t Travel distances X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Quill stroke: 115 mm Work table Table surface: 900 × 700 mm Table swivel range: ±30° Table tilt range: ±30° Table rotary range: ±45° Spindle and milling head Spindle speed: 30–6,000 rpm Spindle mount: SK 50 Spindle drive: 7.5 kW Milling head: swiveling in 2 axes Feed Feed rate: 0–6,000 mm/min Control Control system: Siemens Sinumerik 3 M Performance data Total power requirement: 32 kW Dimensions Space requirement: approx. 3.8 × 1.8 × 2.9 m EQUIPMENT Separate control cabinet Gsdpfj Aa At Uox Akhokd Coolant system Automatic central lubrication Work light Safety emergency stop

Condition: used, Year of construction: 2000, travel distance X-axis: 4,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC 430M, overall weight: 12,000 kg, No minimum price – guaranteed sale to the highest bidder! Gsdpfj Ah Dryox Akhekd TECHNICAL DETAILS Travel range X-axis: 4,000 mm Travel range Y-axis: 550 mm Travel range Z-axis: 600 mm MACHINE DETAILS CNC control: Heidenhain TNC 430M Tool holder: ISO 40 Tool magazine: 22 tool positions Note: The machine is sold without tools.

Condition: used, Year of construction: 1988, machine/vehicle number: 13.088.094, travel distance X-axis: 420 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 120 mm, spindle speed (max.): 9,000 rpm, controller model: HEIDENHAIN TNC 155, drilling depth: 120 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between December 8, 2026, and December 12, 2026! TECHNICAL DETAILS Travel range X-axis: 420 mm Travel range Y-axis: 240 mm Travel range Z-axis: 120 mm Travel range A-axis: ± 30,000 ° Table clamping surface: 780 × 230 mm Drill head adjustment range: 450 mm Spindle speed: 50–9,000 rpm Spindle motor drive power: 3.7 kW Drilling capacity in steel: 20 mm Drilling depth: up to 120 mm Rapid traverse X-axis: 7 m/min Feed rate X-axis: 7,000 mm/min Rapid traverse Y-axis: 7 m/min Feed rate Y-axis: 1–7,000 mm/min Feed rate Z-axis: 0.02–0.30 mm/rev Rapid traverse A-axis: 10,800 °/min Feed rate A-axis: 1–10,800 °/min MACHINE DETAILS Control system: HEIDENHAIN TNC 155 Operating voltage: 380 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,200 x 2,000 x 2,400 mm Weight: 2,000 kg Godpfs Ai Sfxex Akhjkd EQUIPMENT Built-in workshop drawer cabinet Hand tools Milling cutters Matching tool holders Collets External Reference: C.O. - Lot 23

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 12, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 7,000 mm Travel range, Y-axis: 300 mm Travel range, Z-axis: 350 mm Spindle speed: 18,000 rpm Tool holder: ISO 30 Tool positions: 2 magazines with 5 + 1 tool positions each Maximum profile length: 7,000 mm MACHINE DETAILS Control system: CNC control, 3 axes Gkeds Ahmznspfx Akhjd Spindle power: 5.5 kW Operating pressure: 6–8 bar Machining capabilities: Five-sided machining with angled heads Number of clamping systems: 8 pieces Machine weight: approx. 3,200 kg EQUIPMENT Automatic clamping jaw positioning Dual-zone machining / pendulum operation Two tool magazines for both work areas Sawing, drilling, and milling in a single clamping operation Angled heads for five-sided machining Ideal for: Manufacturing of aluminum windows and doors, processing of lightweight metal profiles, manufacturing of PVC profiles, batch and series production, industrial production of long profiles.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 925674, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time on November 26, 2026! TECHNICAL DETAILS Workpiece dimensions: max. 1,000 x 550 x 220 mm Workpiece weight: max. 750 kg Gsdpfx Aks Ai Shashjkd Travel range X/Y/Z axis: 350/220/220 mm Travel range U axis: 350 mm Travel range V axis: 220 mm Table dimensions: 680 x 450 mm Distance from floor to table: 1,000 mm Front door dimensions: 820 mm Total dielectric fluid volume: 760 l MACHINE DETAILS Control system: Agie Charmilles Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 18 A Connected load: 10 kVA Dimensions and weight Machine dimensions: 2,000 x 1,700 x 2,000 mm Machine weight: 2,500 kg EQUIPMENT Workbench with matching accessories

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Machine type: Tool milling machine Manufacturer: Knuth Model: UFM 2 Year of manufacture: 2008 Serial number: 143516 WORK TABLE Table dimensions: 1,330 x 320 mm Number of T-slots: 5 TRAVEL RANGES Travel range X-axis: approx. 500 mm Travel range Y-axis: approx. 400 mm Travel range Z-axis: approx. 400 mm ELECTRICAL DATA Operating voltage: 400 V Frequency: 50 Hz Connected power: 5.3 kW Gedpfo Ad Acqex Akhskd MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,000 mm Width: 1,800 mm Height: 2,000 mm Weight: 2,000 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Stamping force: 40 t MACHINE DETAILS Manufacturer: Bruderer Type: BSTA 40 Machine type: Stamping press Length: 2,000 mm Gkedpfx Aj Ad H Uqjkhsd Width: 1,000 mm Height: 2,400 mm Weight: 3,000 kg