Used Briquette for sale (163)

Condition: excellent (used), Year of construction: 2014, overall weight: 500 kg, power: 3 kW (4.08 HP), PLC control with touch panel Briquetting capacity 80 - 100 kg/h Conveyor screw Ø 130 mm Njdpfx Aswhv Imobvewd Internal connection Ø 160 mm Diameter of chip briquettes 60 mm

Condition: ready for operation (used), Year of construction: 2015, Briquette Diameter: 40 mm Power: 4,1 kW Press Output per hour: 30 kg/h depended on material Hopper opening: 900 x 900mm Nsdpew Ewpgsfx Abvewd Controlled by PLC Hydraulic tank: 50l Autom. ON/OFF with level alarm Oil temperature sensor Transport pipes Used machine in good condition

Condition: used, Year of construction: 2006, functionality: fully functional, total width: 1,900 mm, total height: 1,800 mm, total length: 2,500 mm, briquette diameter: 80 mm, overall weight: 2,400 kg, type of input current: three-phase, oil tank capacity: 600 l, – after technical inspection – Italian production Nwodpfx Aov T Uphjbvod – year of production 2006 – DTR TECHNICAL PARAMETERS: – briquette Ø: 80 mm – max. briquette length: 80 mm – efficiency: 350 kg/h – engine power: 27.5 kW – hydraulic crush: 1400 kg/cm2 – max. operating force: 150 bar – oil capacity: 600 l – container diameter: Ø 1200 mm – container height: 90 cm – dimensions (length/width/height): 2500 x 1900 x 1800mm – net weight: 2400 kg

Condition: new, Year of construction: 2025, power: 40 - 100 kg/h Nwedpfx Aoknyhpjbvjd briquette dimensions: 60 mm briquette length: 40 - 70 mm automatic start-up: yes oil preheating system: yes max moisture: 15 % container diameter: 1000 mm dimensions: 1850 mm x 1170 x 1510 mm (LxBxH) motor power: 7,5 kW power panel: with PLC and touch screen Siemens weight: 770 kg

Condition: new, Year of construction: 2025, hourly output: 10 - 25 kg/h briquette: cube 30mm x 30mm drum dimension: 0,33 m³ dimensions: 1300mm x 740mm x 1200mm (L x B x H) Nwsdpfok Utqvox Abved motor Power: 2,2kW weight: 233 kg

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, A used briquette press C.F. Nielsen BP 5000 in very good condition Nwsdpowiw Rxofx Abvsd

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 109, briquette diameter: 80 mm, overall weight: 1,450 kg, TECHNICAL DETAILS Briquette type Briquette diameter: 80 mm Motor power: 11 kW Production output: 80 - 210 kg/h Machine performance Cycles per minute: 7 Number of cylinders: 3 Max. discharge length: 70 mm Container Ring diameter: 1,200 mm Container capacity: 1 m³ Nwjdpfxexyi Ihs Abvsd MACHINE DETAILS Dimensions and Weight Dimensions (L x W x H): 2,100 x 1,350 x 1,600 mm Weight: 1,450 kg Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. material moisture: 15 % EQUIPMENT Hydraulic oil machine Monoblock clamping system Capacitive sensor for automatic operation Viewing window End-of-cycle system Electronic pressure gauges for pump and clamping pressure Siemens touchscreen PLC Siemens display Operating hours counter Inductive limit switches LED machine position indicator Stamping unit Preheating system Oil level and temperature sensor Preparation for oil cooling in tank and material outlet Power stabilizer Service tools

Condition: excellent (used), briquette diameter 65mm sawdust level probe in the hopper diameter of hopper 1000mm year of production 2001 power supply 380V Nwodpfx Absvx Anpovjd

Condition: used, Year of construction: 2023, operating hours: 41 h, functionality: fully functional, machine/vehicle number: 3617, Model/ Type: RUF 15/4000/70 Ma.Nr. / Ma.No.: 3617 Year of construction: 2023 Drive motor: 15 kW Throughput capacity up to max.: 450 kg/h (depending on material) Press pressure: approx. 4000 kg/cm² Briquette size: 70mm Nsdet Sgrzspfx Abvewd Operating hours / Running hours: approx. 41 h approx. 41 h Warranty: 12 months after delivery 12 months after delivery Verfügbarkeit/ Availability: approx. 8 weeks after receipt of down payment approx. 8 weeks after receipt of down payment Details: + Siemens TP 700, Siemens S7-1200 + Hopper extension with grid / Hopper extension with grid + Elektrische Emulsionspumpe / Electrical emulsion pump + Sprüheinrichtung / Spraying device + Inspection door in hopper / Inspection door in hopper

Condition: good (used), Year of construction: 2013, operating hours: 37,400 h, functionality: fully functional, machine/vehicle number: 2110, total width: 2,000 mm, total height: 2,100 mm, total length: 3,000 mm, overall weight: 5,500 kg, Hydraulic system: Nwjdpfx Absxwizievjd - Power-regulated axial piston double pump  Maximum operating pressure: 300 bar  Drive motor: 55 kW, 400 V, 50 Hz, 3-phase AC, 1,500 rpm  Motor designed as an energy-efficient motor, efficiency class EFF1  Protection class: IP 54 - Valve voltage: 24 Volt DC - Hydraulic tank (950 liters) with additional cooling and fine filter circuit, 5µm filter unit, drive 2.2 kW - Large double return filter integrated in the tank, 10µm filter unit - Hydraulic tank integrated into the supporting frame Electrical configuration: - Machine control cabinet according to DIN EN60204-VDE 0113, protection class IP 54 - Input voltage: 400 Volt, 50 Hz - With lockable main switch inside the enclosure - Emergency stop button in the control cabinet - Control voltage: 24 Volt DC - Freely programmable control (PLC) SIEMENS S7-200 - with Siemens TP 177B operation and display panel  Display and modify operational states and values  Perform operations  Display error messages - Automatic start/stop via light barrier integrated in the feed hopper - All initiators with contactless switching - Gear motors and pump motor with thermal winding protection contacts Material feed: - Feed hopper with fill opening of 800 x 400 mm - Robust sheet steel construction with reinforcements - Hopper volume approx. 150 liters - Agitator to prevent bridging, powered by 0.55 kW drive - Feed screw with 1.5 kW drive - Feed time automatically controlled by PLC Pre-compactor: Vertically arranged, hydraulically operated. - Pre-compactor pressure adjustable via TP 177B - Dust-tight control enabled by the distance measurement system developed and patented by RUF Main compactor: Horizontally arranged, hydraulically operated. - Press pressure adjustable via TP 177B up to 300 bar - Hydraulic cylinder 350, with a pressing force up to 300 tons Press output: - Depending on settings and material, up to 600 pieces per hour (approx. 800 - 1,000 kg/h) Briquette dimensions: - 240 x 70 mm - Briquette length 70 - 110 mm; depending on settings and the type and bulk density of the material to be briquetted - Max. specific pressing pressure approx. 1,776 kg/cm²

Condition: excellent (used), functionality: fully functional, BRIQUETTING machine , HYDRAULIC , AUTOMATIC , model POR STANDARD Nwsdpfx Asw E Iyiobvjd second hand machine working conditions : Excellent briquette cutter system CE mark : Yes briquett diameter mm. 65 briquett length mm.50 / 300 production from 60 kg. to 90 kg./hour motor power Hp 7,5 net weigth kg. 800 overall dimensions cm.195 x 110 H=cm.150 volt. 380/50

Condition: like new (used), Year of construction: 2012, operating hours: 100 h, functionality: unexamined, ARU is an automatic packaging machine designed for wrapping processed cheese in aluminum foil, with or without a tear strip. The main operation begins by applying a paper label onto reel-fed, heat-sealed aluminum foil. Subsequently, wrapping shells for rectangular bricks are formed, which are then filled with processed cheese at the machine's dosing station. A heat-sealed aluminum foil lid is placed inside the filled briquette shell, which is then folded over the lid and sealed using heated pressure pads. Each briquette may include an internal easy-open tear strip, which is applied before the paper label when the ARU is equipped with the ARU-10 module. The optional ARU-10 tear strip applicator can be fitted to both new and used Fasa ARU machines, as well as serve as an auxiliary for processed cheese wrapping machines from other manufacturers. The integration of the easy-open tear strip is the initial step in briquette formation, achieved by cutting OPP/OPP foil from two reels and heat-sealing formed strips onto the aluminum foil, providing a user-friendly opening solution. All external panels and product-contact surfaces of the modernized ARU meet applicable EU safety, hygiene, and food safety standards. Electrical and electronic components are sourced from industry leaders such as Siemens, Omron, Festo, General Electric, Bonfiglioli, Rittal, and others; pneumatic components are exclusively supplied by Festo. Output control is stepless, regulated by a frequency converter. Packaging material in-feed is fully automatic, with the machine stopping if the material runs out or if feeding is interrupted. The machine comes standard with a mechanical data embossing device (PRINT-JET is optional). Features of the ARU line include compact design for optimized production space, robust and proven construction, reliable operation, and ease of maintenance. TECHNICAL DATA: Njdoyt Ru Depfx Abvswd Machine type: rotary Output1, bricks/min: up to 65 Dose2, g: 16.6g – 18g Packed product temperature, °C: 65-75 Briquette dimensions, mm: 16.6g – 39x39x12mm; 18g – 39x39x14mm Wrapping material: aluminum foil Roll external diameter, mm: up to 200 Roll bushing diameter, mm: 76 Roll width for briquette, mm: 100g - 126 Roll width for covering, mm: 100g - 70 Foil thickness, mm (µ): 0.012-0.014 (12-14) Foil weight, g/m²: 37.8-38.6 Labelling material: paper Air (vacuum) pressure, MPa (kg/cm²): 0.06 – 0.09 (0.6 – 0.9) Air (vacuum) consumption, m³/min: 0.3 Rated power input, kW: 2.5 Voltage, V: 220/380 Frequency, Hz: 50 Dimensions (WxLxH), mm: 2800x1510x1700 Approx. weight, kg: 1500 TEAR STRIP APPLICATOR TECHNICAL DATA: Machine type: horizontal Output, strokes/min: up to 70 Tear strip material: OPP foil, red side to be heat-sealed with aluminum foil Roll external diameter, mm: up to 180 Roll bushing diameter, mm: 70 Roll width, mm: 100g – 94 OPP foil weight, g/m²: 43 OPP foil thickness, mm (µ): 0.043 (43) Air pressure, MPa (kg/cm²): 0.45 – 0.6 (4.5 – 6.0) Air consumption, m³/min: 0.015 Rated power input, kW: 0.4 Voltage, V: 220 Frequency, Hz: 50 Dimensions (WxLxH), mm: 800x750x1450 Approx. weight, kg: 160

Condition: excellent (used), functionality: fully functional, briquette diameter: 75 mm, BOGMA" BRIQUETTING MACHINE-PRESS for the production of Cylindrical Briquettes of Diameter 75 mm and Length on demand. With cooling line. In very good condition. Location: 39430 Cantabria (Spain) 1 Machine + Cooling Line: 45.000 €. Nwodpfx Absr Ilrdjvsd Availability 2 - 3 Machines (Complete Briquetting Plant): Price of the Plant, negotiable.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Amis ZBP 50 S Duo sawdust briquetting machine Year of production 2019 Load capacity up to 140 kg depending on material 3.800 working hours Briquettes Ø 50 mm Tank with a capacity of 1.2 m³ Roller with feeder Pre-ironing Screw conveyor Hydraulic pump motors, 7.5 kW each Fan cooling Nwsdpfsumwm Sjx Abvsd Sawdust level sensor in the tank Hydraulic oil tank 100 l SIEMENS control system Dimensions length x width x height 3000 x 2400 x 1700 mm Weight 2000 kg The price of the new machine is 39.800 Euro

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, power: 55 kW (74.78 HP), For sale: Pawert 75/200 briquetting press, fully overhauled in 2025, ready for immediate operation. Technical data: Model: Pawert 75/200 Capacity: up to 1 t/h Main motor power: 55 kW Condition: fully overhauled (2025) Included equipment: Nwsdpjx Npitefx Abvjd -briquette cooling line -hydraulic system -dosing screw -machine oil cooling system -head cooling system -control panel with PLC control Advantages: -reliable industrial briquetting press -suitable for continuous industrial operation

Condition: ready for operation (used), Year of construction: 2001, operating hours: 56,927 h, functionality: fully functional, Manufacturer: ATM Recyclingsystems GmbH Model: ArnoBrik 15 Year of manufacture: 2001 Briquette diameter: 150 mm Technical Data Briquette diameter: 140 or 150 mm Capacity: - Cast iron chips: 4.8 – 5.3 t/h - Steel chips: 4 – 5 t/h - Mixed briquetting: 4 – 5 t/h - Aluminium chips: 1.6 – 1.8 t/h Mixed briquetting: 4 – 4.5 t/h Tyre wire: 2.5 – 3 t/h Hourly throughput depending on material Briquette density for steel and cast iron: 5.5 kg/dm³ Operating pressure: 300 bar Required space (L x W x H): 13,500 x 6,500 x 2,000 mm Machine weight: 30 t Main cylinder force: 5,300 kN Nedpfxjxy E H Ho Abvswd Oil requirement: 2,800 litres Main drive: 4 x 30 kW Connected load including ancillary equipment: approx. 150 kW Briquette height: 110 - 140 mm Briquette weight – depending on material: approx. 10 - 16 kg Cycle time: approx. 10 sec

Condition: ready for operation (used), Year of construction: 2014, operating hours: 7,822 h, functionality: fully functional, Manufacturer: ATM Type: ArnoBrik 10 Year of manufacture: 2014 Briquette diameter: 105 mm Technical Data Main Dimensions Length x Width x Height: 4,250 x 3,600 x 2,200 mm Weight approx.: 10 t Briquette diameter: 105 mm Briquette height depending on material: approx. 60 - 120 mm Performance Data Cycle time: 10 sec. Hourly capacity: - Aluminium: 850 - 1,060 kg/h - Steel, cast: 1,800 – 2,000 kg/h - Nickel: 1,800 – 2,000 kg/h Briquette weight (aluminium): 2.0 – 2.5 kg Briquette density (steel, cast): 5.5 kg/dm³ Briquette density (aluminium): 2.2 – 2.5 kg/dm³ Hydraulic System Number of power-regulated axial piston pumps: 2 units Power requirement per pump unit: 30 kW Operating pressure: 300 bar Hydraulic tank volume: 1,300 l Electrical Equipment Drive power: 70 kW Control voltage: 24 V DC Nwodpfx Abjxy E Evevod Operating voltage: 3 x 400 V / 50 Hz

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. Nwsdpfx Ajwrp Emjbvjd - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Condition: excellent (used), Briquetting machine POR Oscar 9kW Average briquette output: 130-180 kg Nwjdpfx Absxdahyevsd Briquette diameter: 70 mm Motor power: 9 kW Feeding hopper diameter: 1170 mm Technical documentation CE mark Machine weight approx. 800 kg

Condition: ready for operation (used), Year of construction: 2016, Felder clean air extraction unit | Dust extraction system RL 200 | Ø 200 mm Maximum flow rate: 4000 m³/h Nominal flow rate: 20 m/sec, 2300 m³/h Valve pressure: 2380 Pa Filter area: 20 m² Nwodpfx Abswa Rlkjved Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Felder Briquetting Press FBP 50 Briquette diameter: 50 mm Throughput: 30–50 kg/h Motor power: 4 kW Dimensions (L x W): 1750 x 1270 mm Weight: 950 kg Hydraulic oil capacity: 125 liters Year of manufacture: 2016 Condition: Ready for use Price: €15,500 The system has already been dismantled and is stored in the Raasdorf warehouse.

Condition: excellent (used), Year of construction: 2010, operating hours: 4,150 h, functionality: fully functional, machine/vehicle number: T8/049, overall weight: 4,300 kg, For sale: Briquetting press for the production of briquettes from sawdust Wropol Bison III Speedy 500 Serial number: T8/049 Year of manufacture: 2010 Technical specifications: • Motor: 30 kW • Throughput: approx. 500 kg/h (depending on raw material) • Operating hours: 4,150 mth Technical condition: • Machine is fully operational and in continuous use • Prepared for continuous operation • Hydraulic oil changed – July 2025 Njdpfxox H T Eae Abvewd • No play, press runs smoothly Briquette dimensions (RUF-type block): • Height: 100 mm • Width: 65 mm • Length: approx. 120 mm (adjustable) Possibility to start and test the machine on site.

Condition: like new (used), Motor power: 5.5 kW Briquette diameter: 60 mm Sawdust level sensor Operating hours: 1611 h Hopper diameter: 1000 mm Nwsdpfx Abexcvgvovjd Year of manufacture: 1998 CE marking

Condition: ready for operation (used), Motor power: 5.5 kW Briquette diameter: 80 mm Sawdust level sensor Operating hours: 6363 h Hopper diameter: 1200 mm Adjustable feed rate Year of manufacture: 1996 Nwedswd R Aqspfx Abvjd Power supply: 380 V

Condition: good (used), Year of construction: 2012, functionality: fully functional, BRIQUETTING and PELLETING technology: Machine type: BS70 Briquetting equipment The BS70 type BRIQUETTING PRESS equipment can be versatilely used for the processing of naturally renewable raw materials for the production of new, processed commercial goods. The equipment is used for processing and pressing materials such as straw, legumes, hay, paper, wood and other natural materials and their mixtures. The manufacturer designs the equipment according to the product to be processed. The moisture content of the raw materials to be processed is max. 10-12% and must not contain foreign matter (metal, gravel, sand, etc.). Pressing takes place without the addition of any additives or binders, only as a result of pressing, during which (depending on the base material) a density of over 1 kg/dm3 can be achieved. The resulting end product is automatically placed in the storage bags without manual handling, suitable for continuous operation. This can be ensured with 4 briquette presses (briquette diameter 70 mm) and 1 pelletizing machine (pellet diameter 6 mm), which can be installed in a 15x20x6.3 meter hall. The equipment is suitable for 16 hours of work per day, with 2 x 7 hours of continuous operation within that. The system consists of the following units: KSD900 Straw Grinder (2 Pcs): Njdpoubb Ubefx Abvjwd AVSZ70 Automatic control for material preparation (2 Pcs): Screw conveyors (3Pcs): Trough screw conveyor (2Pcs): CSV70 Pipeline (2Pcs): PFK70 Dust selection and dust filter (1 Pc): PF70 Dust filter (1Pc): ST70 Silo tank (6 m³) (2 Pcs): BS70 Briquette press (4 Pcs): The press piston presses the material into a conical tube, which creates a continuous rod with a diameter of 70 mm. The pressure is adjustable and the feed of the conveyor screw can be controlled in the same way. The exchangeability of the press tools enables the control of the quality and density of the manufactured briquettes. As an option for the various raw materials, we deliver various press scopes, which undergo testing before delivery, if the customer provides a raw material sample. By changing the press tool, the machine is also suitable for the production of litter and loose briquetting of feed, or even for making a mixture as an option. The material is pressed without binders or chemical additives. Depending on the density of the processed material, we obtain different products, the specific gravity of which can exceed 1 kg/dm3. The performance of the pelletizing and briquetting system is 1.5 tons/hour based on wheat straw. The performance of the production and the quality of the product are determined by the adjustable speed of the screw and the adjustable press pressure depending on the quality of the raw material. Electricity Demand 37+10 kW. Press pipe (4Pcs): Ribbed conveyor belt (1Pc) HF70 Cooling-heating operating temperature controller (4Pc): AVP70 Control (4Pcs): PELLETING technology for biomass: The manufactured finished product is a 6 mm pellet, 10-40 mm long. Raw material to be processed: hay, straws. Moisture content: max. 10%. To produce the pellets, the technology incl.:pre-shredding (drying), grinding, dosing unit ,moistening, pelletizing equipment, cooling system, screen, filter and a pellet bagger (manual) The type of the machine: MiniPell (1Pc) machine performance: 50-120 kg/hour press engine: 10 kW dosing unit: 0,37 kW weight: 750 kg Grinder (1Pc): Control grid and Manual bagger (1Pc)

Condition: new, 20-26-537/1 FALACH hydraulic briquetting press (new) Type 50 Nwjdpjxrn R Esfx Abvjd Briquette diameter 50mm Press capacity 40 - 60 kg / hour Briquette length approx. adjustable 35 mm Hopper volume 0.38 m3 Pump motor input 5.5 kW Power consumption 3.8 kW / hour Required input voltage and current 3x400V, 16 A Oil cooler yes Operation continuous Automatic reverse of support wheels yes Automatic switching-out yes Maximum percentage of moisture 15 % Specific weight of briquettes 900 kg / m3 Maximum noise level 68 dB Transport dimensions 1860 - 890 - 1100 mm Weight 390 kg Price 13 030 Eur (EXW Jonava, Lithuania)