Used Burn Station for sale (5,310)

Condition: used, Year of construction: 1976, We are selling a used rotary indexing table with four polishing stations. This rotary table is also equipped with four rotary unions. The polishing stations are designed for polishing wheels with a maximum diameter of 500 mm. The stations feature automatic feed. The drive power of the polishing stations is 5.5 kW. Godpfxexxv D He Anloiu If you have any further questions, please feel free to contact us!

Condition: ready for operation (used), Year of construction: 2008, laser power: 50 W, This 3-axis TRUMPF Trumark Station 5000 was manufactured in 2008. It features maximum workpiece dimensions of 680 mm x 500 mm x 700 mm and a traverse path of 500 mm on the Z-axis. The machine has a maximum workpiece weight of 50 kg without the X/Y axis. If you are looking to get high-quality laser marking capabilities, consider the TRUMPF Trumark Station 5000 machine we have for sale. Contact us for further details. - Maximum Workpiece Dimensions (W x H x D): 680 mm x 500 mm x 700 mm- Maximum Workpiece Weight: 50 kg (without X/Y axis), 25 kg (with X/Y axis)- Traverse Path Z-Axis: 500 mm- Traverse Path X-Axis: 300 mm- Traverse Path Y-Axis: 300 mm- Traverse Speed Z-Axis: 1.5 m/min- Traverse Speed X-Axis: 6 m/min- Traverse Speed Y-Axis: 6 m/min- Electrical Connection (Voltage): 115 V / 230 V- Electrical Connection (Frequency): 50 Hz / 60 Hz- Maximum Power Consumption: < 2.55 kW- Workstation Dimensions (W x H x D): 860 mm x 2000 mm x 1310 mm- Workstation Weight (without laser): 410 kg- Laser Class: Class 1- Laser Compatibility: Combined with VMc 1-6 and TruMark 7020 marking lasers Giedsza Albopfx Anlju

Condition: good (used), Good condition. Gjdpfx Aexbpgysnleiu

Condition: used, mileage: 1,001 km, gearing type: other, fuel type: diesel, color: yellow, first registration: 01/1995, Year of construction: 1995, driver cabin: other, Vehicle location: Bovenden, Body: Hydraulic station, compressor Mercedes Benz V8 engine ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Godjugwrajpfx Anljiu - .

Condition: used, Year of construction: 1995, color: yellow, mileage: 1,001 km, first registration: 01/1995, fuel type: diesel, gearing type: other, driver cabin: other, Vehicle location: Bovenden, Body: Roll-off frame with hydraulic station and fifth-wheel plate Mercedes Benz V8 engine ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Gedpfx Anopiu U Eoljiu

Condition: good (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 305642, SEPPELER – Tank filling station Giodpfxszck Aaj Anlsu Maximum axle load: 6500 kg Permissible total weight for access: 40,000 kg Containment capacity per tank (2): 180 liters

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, warranty duration: 3 months, year of last overhaul: 2026, total height: 1,135 mm, total length: 825 mm, total width: 1,325 mm, type of input current: three-phase, DGUV certified until: 07/2027, Fat fryer Jufeba WW - S 20 Full reversible basket for max. 60 pieces Lifting device, manual removal device 1 fermentation trolley with 8 aluminum tipping trays LED temperature controller with safety thermostat Steam cover, drip tray on the left Fat baking station with 1 dipping basket Output approx. 600 pieces/hour. Stainless steel version, mobile Connection 400V, 9 kW, 32A-CEE plug Giodpjin D U Dsfx Anlju Dimensions: 1325/2425 x 825 x 1135 mm, WxDxH Used device cleaned and checked with 6 months warranty Come and take a look at our large warehouse of bakery machines

Year of construction: 1988, condition: good (used), 18 stations shaft Ø: 89 mm Gjdpfx Asbh H T Isnlsiu strip width: 600 mm strip thickness: 3 mm

Year of construction: 1968, condition: good (used), 15 stations shaft Ø: 120 mm strip width: 180 - 830 mm strip thickness: 10 mm Gsdpfx Anobif Evoleiu

Year of construction: 2005, condition: excellent (used), 16 stations design: cassette Gedsh I Nizepfx Anloiu shaft Ø: 45 mm strip width: 300 mm strip thickness: 2 mm

Condition: used, Year of construction: 1992, offer consists of: Gisdsu Sr Nyjpfx Anlju Horizon AC-8000 S air- suction collator with 8 bins - Format: max: 318x470mm, min: 148x210mm - missfeeding-, doublefeeding and jamming control - integrated jugger - bin pile height: 10cm - paper weight: 23-210g/qm - pile height: 10cm/bin - capacity: up to 2400 cycles/hour - dimension: 165x65x207cm - weight: 510kg - power: 3-phase 400 Volt We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2009, Horizon VAC-100m Air-Suction Collator Tower The VAC-100m is the ideal solution for print shops looking to expand their production capacity without investing in completely new systems. Its easy integration with the VAC-100a tower and high reliability make it a valuable addition to your production line. Key Features: Cost-efficiency: The VAC-100m is a cost-effective expansion solution as it operates without its own display and control unit. This reduces acquisition costs and allows you to expand existing systems efficiently. Expandable Capacity: With the ability to connect up to 5 VAC-100m towers to one VAC-100a tower, you can flexibly expand your collating capacity to up to 60 stations. This enables efficient handling of large jobs and a significant increase in your production capacity. Reliability: With error prevention features such as misfeed, double-feed, and jam control, the VAC-100m ensures that your production runs smoothly and without interruptions. Specifications: - Technology: Touch & Work (via VAC-100a) - Number of stations: 10 per tower - Expandability: Up to 6 towers (60 stations) - Error prevention: Misfeed, double-feed, and jam control - Job memory: 9 storage slots for repeat orders - Programs: Double cycle (non-stop operation), sheet insertion (single and double), booklet making program, block program, selective collating - Sheet size: Max. 500x350 mm; Min. 148x120 mm - Paper weight: 40-250 g/m² - Loading capacity: 55 mm per station - Performance: Up to 9,500 sets/h - Power: 230V; 50/60Hz - 1.86 kW - Dimensions: 842x652x1,961 mm - Weight: 310 kg Godpfx Aju Sy Uuenljiu 3 MONTHS WARRANTY We guarantee that the machine operates perfectly and we take responsibility for 3 months. Even after this period, we are always there for you and support you in solving any problems. All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Ingredient Station ZS 15 Gjdpjykiagsfx Anleiu Ingredient station / ingredient trolley with 15 tubs for ingredients worktop on top for weighing Stainless steel construction, mobile Used device, cleaned We have more stainless steel furniture in stock!

Condition: good (used), Code: 0407 Brand: OMGA Model: BA 525 A - CE Standard Hardware assembly center for door and window frames - CE Standard Technical data: Work table covered with felted scratch proof strips , rear part pneumatically inclinable from 0° to 10° with intermediate angles Composition: Carriage with self-fed pneumatic screwer with Böllhoff loader, work stroke controlled by a pneumatic cylinder with a inclusion-exclusion system , height adjustment Right/left backstops for height positioning of right/left handle holes Drilling unit with 3-bit head for the execution of handle holes Pneumatically operated hydraulic shear for cutting hardware Work table size mm 3500 x 1230 Work table height mm 920 Giedpfszcqxnjx Anlju Max working dimension mm 2800 x 2450 Min working dimension mm 350 Dust collector Working pressure 6/7 bar Overall dimensions mm 3600 x 1700 x 1000 h Weight kg 480

Year of construction: 2016, condition: used, Suitable for Kolbus BF 512 Gsdpfx Anjid Nvwoloiu

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Giedpsutuyijfx Anlou Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 tons good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg

Condition: used, Technical Commercial Datasheet – Integrated KAESER CSDX 165 T Air Compressor Station Manufacturer KAESER KOMPRESSOREN (Coburg, Germany) Type Complete "All-in-One" industrial compressed air station, featuring a fluid-injected rotary screw air compressor with variable speed control (CSDX Series), an integrated refrigeration air dryer (Module T), and an advanced SIGMA CONTROL 2 electronic monitoring configuration. Industrial Applications Continuous, high-efficiency plant air generation for automated manufacturing facilities, heavy assembly lines, packaging plants, plastics processing, and automotive industries. The variable speed drive system matches actual compressed air consumption in real time, eliminating peak starting currents and optimizing plant energy performance. Key Technical Specifications * Main Compressor Unit: KAESER CSDX 165 T (CSDX Series / Integrated Dryer Version) - Technology: Fluid-injected rotary screw compressor featuring premium SIGMA Profile rotors - Regulation System: Variable speed control via an integrated frequency inverter (SFC / Sigma Frequency Control) - Nominal Motor Power: 90 kW - Air Flow Range: Dynamic adjustment based on plant load profile (up to approximately 16.15 m3/min maximum capacity) - Maximum Working Pressure: 8.5 bar max (Current digital setpoint displayed: 7.5 bar) - Integrated Air Dryer (Module T): Refrigeration air dryer utilizing eco-friendly R-513A refrigerant (2.6 kg charge), with a maximum pressure of 32 bar on the cooling circuit side. - Electrical Requirements: 400 Volts / 3-Phase / 50 Hz - Control Interface (SIGMA CONTROL 2): - Total running hours: 26,805 h - Hours under load: 15,272 h Giedpfx Ajzcaufonlsu - Current system pressure: 0.00 bar (at standstill) / Internal package temperature: 24 °C Machine Utilization This KAESER CSDX 165 T workstation draws ambient atmospheric air and compresses it through its high-efficiency 90 kW fluid-injected screw airend. The frequency inverter continuously regulates the engine speed to prevent the unit from wasting power during low-demand windows. Saturated, hot compressed air exiting the screw block is directed straight into the built-in refrigeration dryer module (Module T). The dryer chills the air stream down to its pressure dew point, condensing and safely discharging moisture to deliver clean, dry, and precisely regulated air to the factory floor line. System Highlights * Compact All-in-One Workstation Footprint: By enclosing the compressor and the refrigeration dryer unit inside a single acoustically insulated cabinet, the station significantly reduces necessary floor space, transport overhead, and engineering installation costs. - SFC Variable Speed Energy Efficiency: The dynamic matching of motor output to actual pneumatic network demand ensures a highly optimized electrical power factor and an exceptionally competitive cost per cubic meter of air. - Intelligent SIGMA CONTROL 2 Management: This interface monitors all critical operating metrics (pressions, temperatures, and maintenance schedules), ensures advanced industrial network compatibility, and confirms a healthy machine history with low un-loaded idling hours (only 43% idle time relative to total run metrics). - Future-Proof Eco-Refrigerant: The integration of R-513A refrigerant meets strict international F-Gas environmental guidelines, securing the long-term operational legality of the cooling loop without risks of sudden regulatory phase-outs.

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: PM150, Function: The autoclave basket is inserted into the machine by the operator and then locked. The autoclave cages are loaded or unloaded layer by layer via a scissor lift system. The modular design allows the combination of manual, semi-automatic and fully automatic systems. Operation is via two-hand control. Loading and unloading systems can be combined with the following components: -Feed belt and turntable -Clock tape magnetic plate -Transfer plate Giodpet Ix T Asfx Anlsu Features: All machines are adapted to the respective requirements. Feel free to contact us.

Year of construction: 2011, condition: as good as new (ex-display), machine/vehicle number: 10.000 Ltr, Tank & Environmental Protection Wozniack – Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 10,000-liter double-walled storage tank for diesel fuel storage as follows: Nominal capacity: 10 m³ Quantity: 1 Used, but fully overhauled, meaning the tank has been cleaned, refurbished, primed, and painted. Color: RAL... according to your wishes. Material: Steel in steel, material S235JRG2 Documents: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and type plate Shape: Cylindrical, lying horizontally on 2 welded saddle supports (Ground clearance approx. 100 mm) Monitoring space of the double wall filled with leak detection fluid. Tank dimensions: Length: approx. 5,350 mm plus 600 mm for the diesel pump Diameter: approx. 1,600 mm Weight: approx. 2,000 kg Equipment/fittings: Dome 500 mm with dome cover, screws, and seal - Filling pipe 2" with TW closure (filling cap) (from 20 m³ = 3") - Suction pipe 1¼" - Dipstick and dipstick closure – tank content indicator - Vent pipe with cap 1 ½" - Limit value sensor with type approval - Leak detection device (optical) = LAS with leak detection fluid - Access ladder for side mounting, supplied separately Gjdocl Sb Ropfx Anleiu Tank approved for locations outside earthquake/flood zones. Diesel fuel dispenser with data acquisition Type HDM80eco LTE 75 l/min Cloud-based basic module free of charge You can see who, when, where, and how much fuel has been dispensed. Fueling is done via tank key or PIN entry. Filling area/fueling station Type KAP system, galvanized Area with ramps (mm): approx. 2,650 x 5,300 Area without ramps (mm): approx. 2,500 x 5,000 Trough height (mm): approx. 60 - Nationwide general building supervisory approval - Approved: Installation outdoors and in buildings (For outdoor installation with folding cover and passing pipes) - 2 catch basins, each with 150 l volume ===== Top offer: Liquid fertilizer – AHL tank systems in sizes from 10,000 to 100,000 liters. Of course, you can also help design your tank system! All our systems are extensively inspected and checked by selected employees in our company. We also offer cost-effective delivery on request. You can visit our systems at any time. Further tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Have we convinced you of our offer? If you have any questions or requests, simply call us, and one of our experienced employees will be happy to advise you. Price/shipping The price for the fuel station applies ex works Warstein, unloaded. Delivery can be offered at a reasonable price for an additional charge. Delivery time: by arrangement You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and can, as an approved specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle, and transport them. Sincerely, from Warstein Tank & Environmental Protection Wozniack

Condition: good (used), Unitech Boot wash station Gisdpfow U D D Iex Anlsu Stainless, two way boot wash station with fixed side brushes, turning horizonal brushes with water jets, overall length inc steps is 2400mm, overall width 850mm, 3Ph

Condition: good (used), Matcon IBC Discharge cone Gijdpfxjtxrb Aj Anleu Stainless steel, 1000L, IBC discharge stations, 4 in stock

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment Gijdpfxomck Ryj Anlou - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, functionality: fully functional, machine/vehicle number: 00039D88, For sale is a used heating oil pressure unit, model OEG Gerätebau DE 3200, for the reliable pumping and pressure maintenance of heating oil in heating systems. Giedpey U Uc Nefx Anlsu This pressure unit is suitable for supplying oil-fired systems and ensures a constant fuel supply. Thanks to the integrated pressure accumulator, pressure fluctuations are compensated, and stable system operation is supported. Technical data: Manufacturer: OEG Gerätebau Model: DE 3200 Flow rate: 320 l/h Operating voltage: 230 V / 50 Hz Nominal current: 2.0 A Max. operating pressure: 6 bar Pressure connection: IG ¾" Suction connection: IG ¾" Year of manufacture: as per nameplate CE marking present

Condition: excellent (used), Year of construction: 2023, Jungheinrich Charging Station for Industrial Trucks 4 x Charging Station / Maintenance Stand for Battery Maintenance If you utilize electric industrial trucks within your facility, they rely on rechargeable batteries or battery packs as their power source. By installing a dedicated battery charging station, you benefit from a compact solution that significantly simplifies the battery charging process. This system serves as a charging station for industrial trucks (such as forklifts). It features four charging bays equipped with Tecna spring balancers that hold the charging cables securely in position. Gijdpfxey Nx Hne Anlju Construction: The yellow steel structure consists of a metal frame with integrated floor-level impact protection designed to shield the unit from damage caused by vehicles. Spring balancers are mounted at the top to facilitate the ergonomic handling of heavy charging cables. Jungheinrich Battery Charging Station – Floor-Mountable Year of Manufacture: 2023 Chargers not included "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2023, Jungheinrich Charging Station for Industrial Trucks Industrial Charging Station, Maintenance Stand for Battery Maintenance If you utilize electric industrial trucks in your facility, they rely on rechargeable batteries or battery packs as their power source. By installing a dedicated battery charging station, you benefit from a compact solution that significantly simplifies the battery charging process. This system serves as a charging station for industrial trucks (such as forklifts). It features a charging bay equipped with a Tecna spring balancer to hold the charging cable securely in position. Construction: The yellow steel structure consists of a metal frame with integrated floor-level impact protection, designed to shield the unit from damage caused by vehicles. Includes a spring balancer for the ergonomic handling of heavy cables. Jungheinrich Battery Charging Station – Floor-Mountable Year of Manufacture: 2023 Charger not included. "Everything from a single source: We would be happy to offer you suitable bank financing options for your project." komplett-konzept.leasingo.de Giodsy Nx E Rspfx Anleu You can find additional items—both new and used—in our online shop! International shipping costs available upon request!