Used Burn Station for sale (5,315)

Condition: ready for operation (used), Year of construction: 2007, Technical data: 4 folding pockets Ihedpfx Aelfgcweddet

Condition: good (used), Matcon IBC Discharge cone Stainless steel, 1000L, IBC discharge stations, 4 in stock Ijdpfxstxrb Ae Addjht

Condition: good (used), Unitech Boot wash station Stainless, two way boot wash station with fixed side brushes, turning horizonal brushes with water jets, overall length inc steps is 2400mm, overall width 850mm, 3Ph Ihsdpsw U D D Iefx Addst

Condition: excellent (used), Year of construction: 2017, operating hours: 19,187 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, overall weight: 52,000 kg, Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 140 Ihedpfxsxrta Es Addst Year of construction 2017 Working hours 19,187 hours, stand October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 4,34 m³ Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm Driving motor 2 x 75 kW Connected load 226 kW Full load current 428 A Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 800 up to 1300 kg, depends on material and bale lenght SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., type) Schneider MAGELIS Touch Baler dimensions built up with hopper 13,200 x 27,000 x 7,344 mm (l x w x h) Transport dimensions only baler 13.200 x 2.750 x 3.450 mm (l x w x h) Machine weight baler approx. 52 tons Technical data chain belt conveyor: Manufacturer Bollegraaf Typ HBT 1216 Year of construction 2009 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Weight 16 t Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Comments: The press is currently in operation and is to be replaced by a new machine in the 2nd quarter of 2026. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 1339907, For sale unloaded from 22844 Norderstedt due to closure of business. Machine can still be inspected in operation Light barrier Year of construction: approx. 1998 Format 50 x 70 cm Accessories: 2 pumps (vacuum/blown air), hose lines, vibrating table, platform Ihedpjrdyf Rofx Addjt

Condition: new, Lifting /Turnover ("Butterfly") Device for raising panels from horizontal to vertical position or for turning over of panels to enable the fitting of insulation, or the nailing on both faces of a panel. A pair of hydraulically operated tables (also known as a butterfly table) that enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. There is an option to have pneumatically operated pop up idle roller tracks fitted in the table, for easy loading and unloading the panels. The hydraulic lifting of the tables is controlled by push button operation Ijdpfx Ajdzc Rfoddsht 3,5kw motor 6m standard length (optional 12m) 4m maximum panel height Optional side and end stops for floor cassette assembly

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame. Ihjdpfxjb Tmrvo Addjt

Condition: excellent (used), Year of construction: 2011, Schwingenschlögel LNG tank filling station Methan Gas Cryogenic tank gas tank trailer German Cryogenic gas semi-trailer for LNG (liquid methane). Tank filling station Ihjdpetzcdrofx Addst Manufacturer: Schwingenschlögel EU approval. Year: 2011 Full working condition with valid certificates. We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be happy to provide you with a quotation or give you more information about other pressure vessels. To discuss the possibilities, please contact us by phone or e-mail.

Condition: new, A twin blade saw that has been specifically designed for cutting glazing beads accurately to length, with either a straight or mitred cut. The machine has two work-levels one set above the other, allowing two lengths of beading to be cut simultaneously. The two lengths of bead are held secure during the cutting operation by the front pneumatic clamps. Setting the correct length is achieved by means of handwheel moving the left head in relationship to the fixed right head, the length is easily read from the mechanical digital display. Min/Max. cutting length 150mm - 2400mm Max. cutting section at 90° 55 x 100mm Max. cutting section at 45° 40 x 100mm Ihsdpedy Hqvjfx Addot 2 x sawblades dia. 220mm x 30mm bore Motor 1.6hp, 3 phase CE Safety requirements

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Gantry (Portal) machine, belonging to the line (SOFIT code: JZ1030) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 10 (ca.) Ijdel Hyfcspfx Addsht Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: excellent (used), STACKER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on ground) to out-feed pile of panels from the Unloader/Stacker Ihsdst Ty A Ajpfx Addot No. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: like new (used), Carruthers Six-pak 46000 Six station volumetric filler Serial: 46026 Iodpfx Adekl Hr Aodoht Stainless, Six station rotary volumetric filler, HMI touch screen controls, designed for cans or jars, 3Ph

Condition: like new (used), Carruthers Six-pak 46000 Six station volumetric filler Serial: 46025 Iedpfxokl Hrqs Addoht Stainless, Six station rotary volumetric filler, HMI touch screen controls, designed for cans or jars, 3Ph

Condition: excellent (used), Soco System One Man Packing Station Mobile box erector Carton case sealing machine Top and bottom tape heads Model: T-100 380 V, 3 Ph Plastic rollers, roller width: 670 mm Ijdpohlp Nxefx Addoht Height adjustable legs Total dimensions: 1030 mm x 810 mm x 1660 mm.

Condition: good (used), 4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD Solid construction, waterproof board, and galvanized components. The machine is in perfect condition. Technical specifications: Format: 350x320x550 (W/D/H) Number of stations: 4 Power supply: 230V Maximum power consumption: 4kW Weight: 102kg Iedpfxsx Ncw Dj Addeht High clamping force, flywheels with a comfortable grip. Electric drying with two power levels: 2 and 4kW Each press can be tilted up to 45′ The structure is mounted on wheels for easy movement.

Condition: used, Used surface plate with stand Ihedpfx Aow Tdfvjddet

Year of construction: 2004, condition: used, functionality: fully functional, For sale here is the Rommel ME2-470 input station. The system is operational. Ihodpfx Adjxg E Ukedjt

Year of construction: 2025, condition: new, length 1500mm working width 560mm capacity up to 2000 kg/h basic version: gumming of inlet and outlet chassis frame with bogie and steering wheels vertical adjustment frame (inlet height 1000-1200 mm / outlet height 630-830 mm) curled brush Iodpfx Adocx R D Hsdjht stainless steel construction spray-unit for fresh water Water consumption: 5l/min bei 5bar Power: 1,1kW Dimensions (LxWxH): 1550x1000x1750mm Weigt: approx. 120kg

Condition: used, Year of construction: 1976, We are selling a used rotary indexing table with four polishing stations. This rotary table is also equipped with four rotary unions. The polishing stations are designed for polishing wheels with a maximum diameter of 500 mm. The stations feature automatic feed. The drive power of the polishing stations is 5.5 kW. If you have any further questions, please feel free to contact us! Ihjdpfexxv D Hox Addst

Condition: good (used), Year of construction: 1975, 13 stations shaft Ø: 50,4 mm strip width: 500 mm Iodjbif E Eopfx Addeht strip thickness: 1,5 mm

Condition: excellent (used), Year of construction: 2014, This unit is in almost as new condition, has come from a closed protein powder facility. Ihsdpfxew R Ec Dj Addst

Condition: as good as new (ex-display), Year of construction: 2018, functionality: unexamined, total width: 40,000 mm, total length: 9,000 mm, total height: 7,000 mm, type of input current: three-phase, IBC unloading and cip station EX with fume ventilation 5 ibc conatiners with driptray Iedpfxsra Dlps Addeht 2 product pumps completely 316 stainless never used welding documentation registration available simatic panel

Condition: excellent (used), Filling machine Pos. number: LTC00004923 Make: King Type: automatic 6 head inline filling machine Model: KT 340 / ILKT Serial number: 6-2117701 / 214904 Frame: stainless steel Dimensions: L x W x H = 2.750 x 1.600 x 2.000 mm Weight: 700 Kg Capacity: up to 4.000 fillings per hour (depending on filling volume and product) with 1 liter you get about 1.200 fillings per hour. Power supply: 380 Volt - 50 Hz - 3.0 kW Features: volume tank machine fills with pulses, so a wide filling volume range fully adjustable with / without bottom filling 1-6 cups separately adjustable Ihodpfjhbrxxjx Addot Note: machine in perfect condition

Condition: used, Year of construction: 2000, functionality: fully functional, pressing force: 70 t, For sale: a fully functional and well-maintained Husmann MP6070-TS waste compactor installation, currently still in daily operation. The installation is immediately ready for use and is particularly suitable for compacting and transferring various waste streams. Features: - Fully operational and functional installation - In daily use and well maintained - Includes two swap bodies for moving containers Ihsdpjxuhtrjfx Addet - Equipped with hydraulic container couplings and a hydraulic container locking system - Features a large feed hopper - Can be easily filled with a wheel loader, excavator, or from a platform/ramp - Immediately available for use Containers are not included.

Condition: used, TECHNISCHE ANGABEN Anzahl Stationen: 2 Stationen für Selbstklebeetiketten Etikett: Deckel + Boden   Etikett-Breite: 30-300 mm (zu spezifizieren) Behälterformat: runde und eckige Flaschen Seitliche Gurtbänder zum fixiren der Produkte beim Etikettieren Leistung: bis ca. 4000 Fl./Std. CE Konformität: Erfüllt die CE Richtlinie Iodpfx Adexyt Nijdoht Gewicht: ca. 600 KG Abmessungen: 2800(L) x 1300(B) x 2400(H) mm   YouTube Video:   Technical Details : working direction : left-right, linear capacity bph max. : 4000 labels : self adhesive labels number of labelling stations : 2 bottle diamater max (mm) : 120 bottle diamater min (mm) : 40 bottle height max (mm) : 330 bottle height min (mm) : 60 speed adjusment : frequence converter