Used Burn Station for sale (7,137)

Year of construction: 2025, condition: new, length 1500mm working width 560mm capacity up to 2000 kg/h basic version: gumming of inlet and outlet chassis frame with bogie and steering wheels vertical adjustment frame (inlet height 1000-1200 mm / outlet height 630-830 mm) curled brush Hnsdpfxecx R D He Ag Neu stainless steel construction spray-unit for fresh water Water consumption: 5l/min bei 5bar Power: 1,1kW Dimensions (LxWxH): 1550x1000x1750mm Weigt: approx. 120kg

Condition: excellent (used), Year of construction: 2021, We offer a pipetting station with pipettes in perfect condition. CyBi-FeliX pipetting station with CHOICE Head, 8-channel Choice adapter 10-1000uL and 0.5-50 uL Year of manufacture: 2021 Brand: Analytik Jena Hjdpfjumtkajx Ag Nenu Model: Cybio Felix Choice Personal collection from Gdansk (Poland, Poland)

Condition: new, DOPAG Micromix Hnsdpfxexcgpzs Ag Nju The devices in the micromix series are solvent-free, compact, pneumatically driven dosing and mixing units with piston pumps. They are used for processing multi-component, low- to high-viscosity media based on, for example, epoxy, polyurethane, and silicone, with a mixing ratio from 100:100 to 100:4 in spray or continuous flow operation. The materials can be both abrasive and filled.

Condition: new, 4 never used dosing stations. Hjdpfswvmiwsx Ag Nonu

Condition: as good as new (ex-display), Year of construction: 2018, functionality: unexamined, total width: 40,000 mm, total length: 9,000 mm, total height: 7,000 mm, type of input current: three-phase, IBC unloading and cip station EX Hnjdera Dlpjpfx Ag Neu with fume ventilation 5 ibc conatiners with driptray 2 product pumps completely 316 stainless never used welding documentation registration available simatic panel

Condition: used, Test console, test station, measuring station, test device, measuring instrument, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial No.: 0064016 Year: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The 90-1V unit provides a highly stable DC voltage with low ripple. One output terminal supplies the high voltage, while the other is near earth potential and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Hnodpfxsf Axn Ae Ag Neu Good condition Many other ELABO devices under stock numbers 57819, 57820, and 57821

Condition: used, -Dimensions: 1100x650x865 mm -Tank size: 500 mm diameter, 150 mm depth -Serial number: C2171910002 -Manufacturing date: 10/2019 -Temperature: -30°C/-35°C -Voltage: 230V -Frequency: 50Hz Hnjdew N Scbopfx Ag Nju -Ice production: 25 L/h Nsy Tdxew N Scbsugoda -Weight: 90 kg

Condition: used, Year of construction: 2018, functionality: unexamined, machine/vehicle number: 87874 DS, power: 10 kW (13.60 HP), Arnold stapling station: Max. Back-up fuse: 63 A Mains connection: 3 x 400 VAC + N + PE Power: 10 kW Hnsdpsrvyrbsfx Ag Nsu Control voltage: 24 VDC Incl. KLH Kältetechnik W05.HL3 and Trumpf TruPulse 103

Condition: used, Year of construction: 2005, Conveyor tower Solema Drying station 25 Hnodpfx Aewx Ii Rsg Nju Year: 2005 Description: - Length of conveyor: 25 mtr - Delivery to the right

Condition: excellent (used), Year of construction: 2005, dual track rollforming line 2 x 18 stations design: cassette shaft Ø: 30 mm strip width: 200 mm strip thickness: 1 mm Hnjdeh Tm Rljpfx Ag Neu

Condition: excellent (used), Filling machine Hnsdpfshbrxxjx Ag Nou Pos. number: LTC00004923 Make: King Type: automatic 6 head inline filling machine Model: KT 340 / ILKT Serial number: 6-2117701 / 214904 Frame: stainless steel Dimensions: L x W x H = 2.750 x 1.600 x 2.000 mm Weight: 700 Kg Capacity: up to 4.000 fillings per hour (depending on filling volume and product) with 1 liter you get about 1.200 fillings per hour. Power supply: 380 Volt - 50 Hz - 3.0 kW Features: volume tank machine fills with pulses, so a wide filling volume range fully adjustable with / without bottom filling 1-6 cups separately adjustable Note: machine in perfect condition

Condition: used, Test bench, test station, measuring station, test device, measuring device, tester for HV, PE, and IS measurement ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 High voltage test device The device PE/IS/HV / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations according to EN60204, Part 1. Serial no.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A Hnjdpfx Ajd Dc Unsg Neu - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable DC voltage with minimal ripple. One output terminal supplies high voltage, the other output terminal is close to earth potential and can be set to a maximum potential of 300 V. Serial no.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A EMI suppression according to VDE 0871 Rated output: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial no.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on roller frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57820 and 57821

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, warranty duration: 3 months, year of last overhaul: 2025, Fat fryer Jufeba WW - S 20 Full reversible basket for max. 60 pieces Lifting device, manual removal device 1 fermentation trolley with 8 aluminum tipping trays LED temperature controller with safety thermostat Steam cover, drip tray on the left Fat baking station with 1 dipping basket Hjdpfjin D U Dox Ag Nenu Output approx. 600 pieces/hour. Stainless steel version, mobile Connection 400V, 9 kW, 32A-CEE plug Dimensions: 1325/2425 x 825 x 1135 mm, WxDxH Used device cleaned and checked with 6 months warranty Come and take a look at our large warehouse of bakery machines

Condition: used, mileage: 229,530 km, power: 74 kW (100.61 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, overall weight: 1,975 kg, empty load weight: 1,435 kg, maximum load weight: 540 kg, first registration: 07/2007, emission class: euro5, color: silver, tire size: 205/55 r16, machine/vehicle number: 247, Equipment: ABS, airbag, fog lights, trailer coupling, CD player power steering Electric windows Hnjdpjqu Rnkjfx Ag Nou Soot particle filter Black fabric interior air conditioning Steel rims 5 seats cubic capacity 2.000 cm³ Errors excepted

Condition: excellent (used), Epson G10-854SR Robot Assembly Station Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = heatsink, SW = front wall bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and circuit boards is conveyed via the transfer belt into the dispensing area. - The WT is stopped at the lift-positioning unit (HuPo), raised off the belt, and secured in place - The X-Y-Z handling system moves the dispensing head to the designated position and initiates the dispensing process. - Once dosing is completed successfully, the handling system moves to the home position and the WT is placed back onto the conveyor - Transfer continues into the assembly area KK+SW (prerequisite: no WT in placement position) St.3.2: Assembly Area KK+SW - A WT transported from the dispensing area enters the KK+SW assembly area via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), raised from the conveyor, and fixed in place; during this, the chassis side panels of the partially assembled component are aligned - Simultaneously, the positioning of the KK and SW tray is carried out - Both a KK tray stack (12) and a SW tray stack (12) are manually placed onto each respective infeed conveyor outside of the safety enclosure - The two safety shutters are opened and the loaded tray stacks are conveyed into the gripping position of their respective stackers - The safety shutters are then closed - The respective grippers pick up the corresponding tray - Using the Z-axis, trays are singled and transported upwards (above the actual pick-up height) - To center and stabilize the trays, a centering support is positioned beneath each tray using the X-handling system. - Using the stacker Z-axis, each tray is placed onto its centering support - The trays are now ready for component pick-up - The SCARA robot with a multi-gripper picks up the KK from the tray and places it in an intermediate alignment position (to compensate for inaccuracies in the pick-up and establish a fixed gripping point for assembly) - The KK is scanned, picked up again, and if the scanner result is OK, installed onto the WT - Non-OK KKs are placed in a non-OK container - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position - The SW is picked up again and installed onto the WT - Continue with Assembly Area Front Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, maximum 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Rotational range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Rotational repeatability: J4: +/- 0.005° Maximum work envelope: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Press-in force: 250 N Weight: 48 kg Hsdpfjibx S Njx Ag Njnu Control: EPSON RC180 Mounting type: Ceiling IP protection class: IP20 Power and signal cables: 3 m Additional assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request.

Condition: excellent (used), Here we offer you a DÜRR test station for adhesive heads. DÜRR test station for glue heads included (5 robot guided glue heads) DÜRR test station (self-built Dürr) for the automotive industry Weight: 1200 kg Type: DÜRR test station for glue heads Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you. Hnedpfx Asmhftdsg Nju

Condition: used, Year of construction: 2010, overall weight: 30 kg, System for argon/gas Hodpfx Agow Sdk Ns Njnu External dimensions: Width: 500 mm Depth: 500 mm Height: 600 mm Weight: approx. 30 kg Condition: good, second-hand

Condition: used, Turning station RITTAL / E SYS-K System GmbH Automated turner for packaging made from ALU system profile Swivel station with roller conveyor, ALU system profile BOSCH REXROTH Weight of turning device: 730 kg Hodpfx Agev Tdkbo Nenu As-new condition

Condition: used, Hydraulic station Power: 15 W Manufacturer: VEM Made in: Germany Hnjdjwmqa Uspfx Ag Neu Weight: 120 kg

Condition: good (used), Roche MagNA Pure LC Nucleic Acid Preparation Station Description of the manufacturer, all data without guarantee. Hnedpfx Agsh Dpxho Nou Services Save time with fast, fully automated isolation of high-quality DNA, RNA and mRNA. Get reliable, reproducible results. Benefit from high flexibility in sample type and volume as well as elution volume and post-elution processes. Benefit from software-assisted set-up of reagents and disposables. Automated pipetting of PCRs into LightCycler ® capillaries (LightCycler ® sample carousels ), LightCycler ® 480 multi-well plates (96-well), PCR plates or strips or tubes. Product description The MagNA Pure LC instrument is a benchtop instrument for rapid, cross-contamination-free nucleic acid preparation and PCR setup. A fully enclosed housing, automatic clot and tip loss detection and sample tracking make the MagNA Pure LC instrument a true "walk-away" instrument. Filtration, centrifugation and other manual steps are completely eliminated. No vacuum pumps or tubing are required. With the piston-driven 8-channel nozzle head and liquid handling with direct displacement, the risk of cross-contamination is reduced to an absolute minimum. The UV decontamination and HEPA filter system ensure maximum safety for samples and the environment.  Item condition: used untested Scope of delivery as shown Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Trumpf Type: TruMark 3000 Laser marking station Wavelength: 1064 nm Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone. Hnodpfx Agsv Hfu Ue Nou

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg Hnjdpfxsmck Ryo Ag Nju good condition

Condition: used, Hydraulic station Manufacturer: ASEA Hnodpowmqc Nofx Ag Nou Made in: Sweden

Condition: good (used), Year of construction: 2014, Tecna 3484 Universal Spot Welding Station 8 kVA Universal welding station 8 kVA, manually operated gun, double program. Simultaneous connection of two tools with automatic recall of the corresponding welding program, saving time and avoiding errors in terms of simple and safe work flow. Body repairs: resistance spot welding of sheet metal, smoothing with dent spotter (nails and washers), local heating (carbon electrode), screw and rivet welding, dent removal of stainless steel sheet. Synchronous SCR welding control, setting of welding time in cycles and pulses, setting of welding current and compensation function. Mains supply: 400V Hnsdpfjl Smn Sex Ag Nsu Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50 %ED: 8 kVA Max. Welding power: 35 kVA Max. Secondary current: 6,4 kA Heat current 100 %: 0,88 kA Year: 2014 Weight: 85 kg Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), Mahr Type: MarSurf GD 140 BG 22 Product Information: The MarSurf GD 140 is a high-precision roughness and waviness measuring station from Mahr, designed for use in production metrology and in the measuring room. It sets new standards in surface metrology with its high speed, reliability, and flexibility. Product Features: Multifunctional: Measures roughness, waviness, and profile of workpieces. Location: Can be used in the measuring room or in close proximity to production. Software: Control via user-friendly MarWin software: EasyRoughness MarWin Software Version: V12.20-06 SP1 Areas of Application: Industry: Mechanical Engineering Typical Measurement Objects Bearings, threads, threaded rods, ball screws, shafts, gear racks Industry: Production Metrology Typical Measurement Objects Contour Measurement in Semi-Automatic Processes Industry: Automotive Industry Typical Measurement Objects Steering, braking systems, transmissions, crankshafts, camshafts, cylinder heads Industry: Medical Technology Typical Measurement Objects Contours of hip and knee endoprostheses, medical screws, and dental implants Technical Specifications – MarSurf GD 140 Feature Value / Description Resolution – Measuring Range 1 / 2.0 nm Resolution – Measuring Range 2 / 0.2 nm Start of Traverse Length (X) 0.1 mm End of Traverse Length (X) 140.0 mm Traverse Length (Lt) 0.1 – 140 mm Guide deviation 0.20 µm / 60 mm 0.40 µm / 140 mm Measuring force 0.7 mN Measuring speed 0.02 mm/s to 10 mm/s Positioning speed (X) 0.02 – 200 mm/s Positioning speed (Z) 0.02 – 50 mm/s Probe system: Roughness probe system (skidless) – without probe base Probe arm lengths 45 mm (×1) 67.5 mm (×1.5) 90 mm (×2) 112.5 mm (×2.5) 135 mm (×3) Measuring range (depending on probe length) ±250 µm (with 45 mm probe arm) ±750 µm (with 135 mm) Probe arm) Technical specifications – Dimensions: Dimensions (L × W × H) Hodpfx Aswlhwnsg Nsnu Length: 780 mm, Width: 535 mm, Height: 1240 mm Maximum workpiece weight: 90 kg Additional functions Manual TY adjustment (e.g., for lateral alignment) Total weight (gross): 196 kg Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.