Used Calibration System for sale (904)

Condition: used, mileage: 263,000 km, power: 290 kW (394.29 HP), first registration: 09/2019, overall weight: 26,000 kg, fuel type: diesel, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 8,200 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, tail-lift, We are very pleased that our offer has caught your interest and would like to assure you in advance that you can purchase a high-quality and competitively priced vehicle with a fully traceable service history from our company! MB ANTOS 2540 with certified Spier sliding curtain body Rear load securing system Tail lift: 2,000 kg Trailer coupling (AHK) Steering axle Tyres: 315 / 70 R 22.5 Payload: 14,270 kg GERMAN VEHICLE REGISTRATION / EXPORT SERVICES We will organise registration and export documents (EUR 1 and manufacturer’s declaration) for you. FINANCING Blsdpfxoxzxtce Aflsr Upon request, we gladly offer you a leasing, hire purchase, or finance package. SERVICE TÜV (Main Inspection), UVV tail lift inspection, load securing inspection, tachograph calibration, installation of OBU device, and servicing by our authorised specialist workshop on site. TOLL / ROAD CHARGES Toll can be arranged on site. TRAVEL / DISTANCES Wittlich train station 500 m Frankfurt Airport 150 km Frankfurt-Hahn Airport 40 km Luxembourg Airport 75 km Sale according to our terms and conditions. Online information is non-binding and does not constitute guaranteed properties. The seller is not liable for typing or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 Wittlich-Wengerohr.

Condition: used, Year of construction: 2019, x-travel 800 mm y-travel 1020 mm z-travel 970 mm Control TNC640 B - axis 360 x 0,001 ° feed B-axis max. 50,00 U/min A - axis -185 / +45 x 0,001 ° feed A-axis max. 25,00 U/min feed x-axis 1 - 65.000 mm/min feed y- axis 1 - 50.000 mm/min Feed z- axis 1 - 80.000 mm / min. rapid traverse X/Y/Z 60 / 50 / 80 m/min spindle turning speed - stepless 1 - 16.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 32,00 KW max. torque at 40% / 100% load 206,00 / 159,00 Nm spindle diameter in front bearing 80 mm tool taper HSK-A63 tool magazin: 70 tool length - max. 500 mm tool diameter 118 mm tool diameter with 2 vacant positions 260 mm tool total weight 22,00 kg Chip to chip time 4,2 sec. Bledpfx Afsxn Amaslsr size of pallet Ø 770 mm workpiece weight 800 kg interference diameter 900 mm total power requirement 35,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 7,00 x 3,50 x H3,50 m 5-axis machining center with Heidenhain TNC640 control, integrated KNOLL coolant system KF220, coolant high-pressure 23bar, coolant through the spindle, chip conveyor, measuring probe Heidenhain TS640, electromechanical tool length check, Swivel axis calibration GSC, collision monitoring "DCM Collision", BLUM-Laser, GROB Spindle-diagnosis (GSD), kinematics-set.

Condition: good (used), Year of construction: 2008, functionality: fully functional, total width: 1,700 mm, total length: 1,765 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, compressed air connection: 4 bar, Wenzel Smart Gear - gear and 3D coordinate measuring machine The machine is in very good condition and fully functional. It has been regularly serviced and well looked after. Machine data: • Machine dimensions L=1765mm W=1700mm H=2232mm • Max. rotary table workpiece diameter = 5 to 270mm • Measuring accuracy gear testing in accordance with VDI/VDE2612/2613 Group II • Max. rotary table load = 20 daN • Travel paths X= 500mm Y=450mm Z=400mm • Scanning probe - Renishaw SP600M • 7x SP600 change plate for probe included Bodpfevvudksx Afljlr • Module measuring range 0.4 - 10mm • Active air damping of the machine • Year of manufacture 2008 • Accessories such as driver, reference ball etc. as shown • Jaw chuck D=80mm with inside and outside jaws • 24 inch monitor, mouse, keyboard The following software modules are included: Gear cutting software: • TMain - program management • TStylus – Probe management • TCali – Probe calibration • TAmo – Calculated axis position determination • TGear – Spur gear measuring program • TGear – Head and root circle option • TWorm – Worm measuring program 3D software • Metrosoft CM 3.8

Condition: used, Abrasive belt length 1st unit: 2,150 mm Max. working width: 1,300 mm Number of belts: 3 Belt 1st unit: cross belt Design 1st unit: cross belt Sanding pad 1st unit: electronic segmented pad Abrasive belt width 1st unit: 150 x 4,800 mm Drive 1st unit: kW 2nd unit: longitudinal roller Design 2nd unit: steel calibration roller Abrasive belt length 2nd unit: 2,150 mm Abrasive belt width 2nd unit: 1,350 mm Abrasive belt speed 2nd unit: 18 m/sec 3rd unit: pad unit Design 3rd roller: electronic segmented pressure beam SDS system Sanding pad 3rd unit: electronic segmented, 32 mm width Blodoxzi S Njpfx Aflor Abrasive belt length 3rd unit: 2,150 mm Abrasive belt width 3rd unit: 1,350 mm Suitable for lacquer sanding: yes Belt air blast: yes Vacuum conveyor: yes Feed speed, fixed: stepless 5 – 15 m/min Control: screen control Electrical/pneumatic belt oscillation: electrical Infeed height: variable (lower table moves) Table height adjustment: electric motor Table height display: digital Working height / feed table height: 880 mm Location: Supplier

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 98.12.082, grinding width: 1,300 mm, overall weight: 4,200 kg, working height: 880 mm, power: 38 kW (51.67 HP), grinding belt length: 2,100 mm, grinding belt width: 1,350 mm, Very well-maintained HEESEMANN MFA 8-CC Multi-Purpose Wide Belt Sander Heavy-duty column construction with transport bed and continuous feed belt, equipped with braking system, variable feed speed from 2–10 m/min, frequency controlled. Constant working height of 880 mm; machine upper section can be motor-adjusted according to workpiece thickness (3–140 mm). Integrated electrical cabinets included. Graphical touch screen operator terminal Program memory for saving sanding parameters for up to 20 different programs Cross-belt sanding unit: - Belt dimensions: 4800 x 150 mm - Belt speed: 12 m/s - Drive power: 11 kW - Maintenance-free braking system, complete segmented pressure belt system, pneumatic belt tensioning, workpiece-dependent belt blow-off system Longitudinal sanding unit: - Belt dimensions: 2100 x 1350 mm - Belt speed: 2 – 20 m/s, frequency controlled - Drive power: 15 kW - Maintenance-free braking system, pneumatic belt tensioning, automatic compensation for varying belt edge lengths, workpiece-dependent belt blow-off system, double number of air nozzles at belt blow-off, sanding belt operates against feed; includes calibrating unit on first longitudinal sanding unit, can be activated via terminal Pressure beam: - With computer-controlled selective pressure regulation system CSD offering stepless adjustment of individual pressure elements for flexible, multi-track feed; control roller spacing: 32 mm - Workpiece tolerance compensation up to at least 2 mm - Working width, as well as sanding start and end positions, are electronically controlled Brush roller unit: - Height adjustable, including extraction hood and pressure roller - Brush set: fibre type - Diameter: 150 mm - Drive power: 1.5 kW Bedpfx Aexy R Hrofljlr Operating voltage: 400 V, 50 Hz Aggregate arrangement: cross & longitudinal Belt support/operating side/feed gearbox: right Terminal: right Paint finish/machine: white RAL 9001 Paint finish/doors: blue, NCS 1060 R 90 B Workpiece vacuum clamping system: - Including cleaning device for the feed belt - Fan unit drive power: 5.5 kW The machine is operational and can be tested at any time. A forklift for loading is also available.

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Bsdpevxuxmofx Aflslr Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Precision solar simulator for the measurement and calibration of solar cells and modules. Simulates the solar spectrum using a xenon or LED-based flash light source. Uniform irradiation area, automated test procedures, and integrated control via touch panel. Compact, sound-insulated enclosure with safety interlock, signal lamp, and test chamber access via sliding door. Bjdpfx Afjxzuiaolslr

Condition: good (used), Year of construction: 2012, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 250 mm, workpiece weight (max.): 40 kg, total height: 1,778 mm, total width: 1,027 mm, total length: 1,407 mm, overall weight: 579 kg, Immediately available. Nationwide delivery within a maximum of 7 days after order. General machine data: Machine type: Quick Vision Apex CNC Year of manufacture: Mid 2012 Manufacturer: Mitutoyo Measuring range: 400 x 400 x 250 mm Control unit: Mitutoyo QV Remote Box Operating manual: Available Hardware and software configuration: Computer/CPU: Brand new unit Monitor: Brand new unit Bjdjw Hqx Rspfx Afljlr Software: Mitutoyo QVPAK V13.2 Probe holder: Renishaw PH-6 with PI200-3 Probe: Renishaw TP200 Power supply: Mitutoyo Power Supply Unit 600 Additional accessories: Objectives - 02AKT250 1x & 02AKT300 2.5x This Mitutoyo Quick Vision Apex CNC from mid-2012 is designed for versatile measuring applications. Equipped with modern hardware and the latest Mitutoyo software, it offers high precision and reliability. The comprehensive accessories—including the Renishaw probe and calibration sphere—enable a wide range of measurement tasks. Kneissl Messtechnik GmbH is a trusted Mitutoyo partner. Thanks to our close cooperation, we can respond to individual customer requirements and implement specific modifications to the Mitutoyo Quick Vision Apex.

Condition: used, mileage: 164,000 km, power: 265 kW (360.30 HP), first registration: 03/2019, overall weight: 26,000 kg, fuel type: diesel, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space width: 2,484 mm, loading space length: 7,428 mm, loading space height: 2,064 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, We are very pleased that our offer has sparked your interest and can already assure you that you will be able to purchase a good-value vehicle with a fully traceable service history from our dealership! AdBlue tank 60 l, left side Standard trailer coupling, D40, Ringfeder Trailing axle, 7.5 t, steerable, liftable, unloadable Fuel tank 290 l, left side, 650 x 565 x 950 mm, aluminium Front axle air-sprung High Performance Engine Brake Mercedes PowerShift 3 Bljdpsxy D Tlsfx Aflsr Euro VI engine specification with OBD-C Cab Passenger functional seat Floor variant, tunnel 320 mm ClassicSpace Comfort driver's air suspension seat Cab width 2.30 m Air conditioning M-Cab M-Cab ClassicSpace, 2.30 m, tunnel 320 mm Safety Active Brake Assist Euro 6 265 kW (360 hp) Antos 2536 STEERING AXLE 6x2 Print View HTML Trailer brake, 2-line, brake connectors left Attention Assist Electronic brake system with ABS and ASR Disc brakes on front and rear axles Lane Keeping Assist Stability Control Assist Cruise control Additional information Orten bodywork, Cargo securing, Swing wall and roof Trailer coupling jaw Ø 40, raised coupling Tail lift LBW Bär, 2000 kg, approx. 2200 sheets GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will arrange your registration, export documents / EUR 1 and manufacturer’s declaration for export. FINANCING On request, we can provide a lease-purchase or financing offer. SERVICE TÜV technical inspection / UVV LBW / LGS inspection / Tachograph calibration / Installation of OBU device and servicing by our authorised workshop. TOLL / ROAD FEES Toll registration can be arranged on site. ARRIVAL / DISTANCES Wittlich railway station 500 m away Frankfurt airport 150 km away Frankfurt-Hahn airport 40 km away Luxembourg airport 75 km away Sale in accordance with our general terms and conditions. The information provided online is non-binding and serves only as a description. It does not constitute guaranteed characteristics. The seller is not liable for errors or data transmission mistakes. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 200 mm, type of input current: AC, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Factory-refurbished Mahr Multiscope 662 (factory acceptance before delivery) Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. Includes the latest software update für windows 10 (Windows 11 and OptiCheck2025 optionally available) free lifetime software hotline, and user support. Optional delivery with factory service or shipping, worldwide. Online or on-site demonstrations available with customer parts, and application consulting by accredited Profitech measuring laboratories during project planning. Complete service: Optional complete service: – Delivery, setup, commissioning, accuracy acceptance according to standards, certification, and extensive acceptance documentation. Individual training and educational programs also available as online courses. Rental, hire purchase, or financing directly through Profitech without a financial institution. Measuring device customizable to customer needs. Blodpfx Aeu Dw T Uoflsr Multisensor measuring device equipped with a camera, laser, and Renishaw probing system. Measuring range for all sensors: 600x600x200mm (l x w x h) Dimensions: 1540x1120x2300mm (l x w x h) Space requirement: 1940x1520x2500mm (l x w x h) Weight: approx. 1300kg (including control cabinet and base) Max. load capacity: Glass plate 40kg Accuracy: U1=2.4 + L/150; U2=3.2 + L/125; U3=3.9 + L/100 (L= measuring length in mm) Max. travel speed: 250mm/s Including 2-step zoom camera Including laser Including LED ring light Including Renishaw TP200 probing system Including frame grabber (Eagle) Including Windows 10 Including new Optichek 3D 5.0 evaluation software Including Renishaw TP200 probing system During optional commissioning and calibration, the measuring device can be programmed for customer-specific parts so that you can immediately run your measurement programs even before any required training.

Condition: used, Year of construction: 1997, Number of belts: 2-belt Max. working width: 1100 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: Calibration roller Diameter of 1st roller: 150 mm Design of 1st roller: grooved rubber roller 90 degrees Shore Sanding belt length of 1st unit: 1900 mm Sanding belt width of 1st unit: 1120 mm Sanding belt speed of 1st unit: 18 m/sec Drive of unit 1: 11 kW 2nd belt: Sanding unit shoe Sanding shoe of 2nd unit: electronic individual links 45 mm segment width Sanding belt length of 2nd unit: 1900 mm Sanding belt width of 2nd unit: 1120 mm Sanding belt speed 2nd unit: 18 m/sec Drive of 2nd units: shared motor with 1st unit with rigid sanding pad for solid wood and frame sanding. Lacquer sanding possible: No. Fixed feed speed: 5/10 m/min. Control: Hand control panel. Electric/pneumatic belt oscillation: Yes. Table lift: Electric. Table display: Digital. Operating pressure: 6 bar. Machine number: E / 79191. Dimensions: 1930 x 1700 x 1980 mm. Motor power: 12 kW. Extraction diameter: 2 x 150. Storage location: Nattheim. Blsdpfx Aexq Aptsfljr

Condition: good (used), Code: 0667 Brand: SCM Model: SANDYA UNO/RCS Automatic wide belt sander with 2 belts (Roller + Pad) for furniture, furnishings, wooden doors and windows, doors and various panels Composition: 1° Group steel calibrating roller 2° Group roller + finishing pad Technical data: Working width mm 920 Working height mm 3 - 160 Sanding belt dimensions mm 930 x 1525 N° 2 belt feed speeds mt/min 4,5/9 Main motor power Hp 10 Bledpfx Afex A A Duelsr Infeed and outfeed roller conveyors Electric table lifting Working pressure atm 6 N° 2 suction mouths diameter 160 mm Overall dimensions mm 1500 x 1600 x 1700 h Weight kg 1070

Condition: used, This listing is for a Sartorius Tare CPA34001S Analytical Balance The unit is in full working condition and is ready for immediate release. This model offers a weighing capacity of up to ~34,000 g (34 kg) with a readability of 0.1 g. It includes an automatic internal calibration (isoCAL) function, allowing the balance to self-calibrate at set intervals to maintain accuracy. The weigh cell is described as “monolithic weigh cell technology” which gives stability, precision and durability. Large weigh pan: e.g., specification documents list a pan size of 400 × 300 mm for this model. The housing is designed to be robust and chemical-resistant for tough lab environments. Interface: it supports RS-232C / V24‐V28 serial interface for data logging, printing, external systems. Fast response time: average response stated < 2 s in one specification sheet. Tare function: full subtractive tare up to 100% of capacity is supported. Technical Specifications (typical) Based on the manual and spec sheet for this model: Bjdexrt N Hopfx Aflolr Capacity (Max): 34,000 g (34 kg) Scale interval (d): 0.1 g Linearity: ±0.2 g (typical) Repeatability (standard deviation): ≤ 0.1 g Pan size: ~400 × 300 mm Dimensions (W × D × H): ~313 × 532 × 120 mm Typical response time: ≤ 2 s Operating ambient temperature with isoCAL: 0 °C to 40 °C; without: +10 °C to +30 °C (from manual) Interface: RS-232C serial, 7-bit, various parity, 150-19200 baud. Applications & Use-Case Given its capacity (34 kg) and readability (0.1 g), this balance is suited for large-capacity analytical weighing rather than ultra-fine micro-weighing. Typical uses could include: Weighing bulk samples, large containers or vessels (e.g., large drums, tanks) where still a good accuracy of 0.1 g is required. Industrial laboratories, QA/QC, production where large items must be weighed with decent precision. Situations where the weighing pan size needs to accommodate large items (400×300 mm is relatively large). Environments where interface to computer/printer is needed for logging and traceability. Where regular internal calibration is a benefit to maintain accuracy over time without frequent manual external weight calibration.

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Purchase your coordinate measuring machine from the largest specialist with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General Machine Data: Machine Type: Crysta Apex C7106 Year of Manufacture: Mid 2004 Manufacturer: Mitutoyo Measuring Range: 700 x 1000 x 600 mm Control Unit: UC-200H Operating Manual: Available Hardware and Software Equipment: PC/CPU: Demonstration/New device Monitor: Demonstration device Printer: Demonstration device Software: Delivered without software; full upgrade to MCOSMOS-1 V5 included in the price Accessories: Probe Head Mount: Renishaw PH10MQ Probe Head: Renishaw TP200 Additional Accessories: Ceramic calibration sphere, Renishaw rack 1 x SCR-200 Blsdpfx Afexqnr Holsr We are happy to provide individual consultation as specialists to help you find the right machine for your measuring tasks. Worldwide delivery available on request! Upon request, we can also offer calibration or maintenance services. We are happy to advise you on all aspects regarding coordinate measuring machines. If you are interested in selling your machine, do not hesitate to contact us. We can also offer the machine for lease or hire-purchase by arrangement. We will find your machine!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Measuring range X-axis (tool diameter) approx. 400 mm Measuring range Z-axis (tool length) approx. 400 mm Max. tool weight 10 kg Tool holder/base holder SK 50 Tool adapter SK50 to SK40 with calibrated calibration balls Digital display with operating instructions/manuals Well-maintained tool presetter in very good condition. Bledoxya Irepfx Aflsr

Condition: refurbished (used), Year of construction: 1984, functionality: limited functionality, pressing force: 40 t, year of last overhaul: 2024, punching force: 40 t, SCHAAL Punching Press Type SEP40 Machine number 84/623 Year of manufacture: 1984 Condition: very good, mechanically overhauled, without press control; A new control unit is available on request Press force: 40 tons Sheet width: 150 mm Stroke: Fixed stroke 50 mm. (Original 8 - 70 mm) Number of strokes – infinitely variable: 100 – 250 spm (possible up to 400 spm, but with the current stroke of 50 mm the maximum is 250 spm) Ram surface: 340 x 320 mm Tool holder bore: Ø 40 x 80 mm Ram adjustment: 70 mm Table size: 550 x 580 mm (not included in the scope of delivery, available upon customer request) Clear opening in table: 400 x 90 mm Lateral frame opening: 250 mm Distance between uprights: 560 mm Drive power: 5.5 kW Dimensions (H x W x L): 2300 x 1600 x 1400 mm Weight: approx. 3,800 kg Feed: Bjdpfxexwk Tgo Afljlr Type: SZV 2 Number: EP4340 Year: 1999 Strip width: 8 - 120 mm Feed length: 2 – 80 mm Feed thickness: 0.1 – 2 mm Feed accuracy: ±0.01 mm Equipped with Unidor press force measuring system, calibrated on 29-2-2024 Press and roll feed have been mechanically overhauled at the beginning of 2024. Renewed: eccentric shaft, main bearings, flywheel bearings, connecting rod bearings, ram roller bearings, drive belt for roll feed, pressure regulator, rotary union seals, access doors, and polycarbonate panels. The machine can be inspected in operation.

Year of construction: 2018, condition: repair required (used), functionality: limited functionality, machine/vehicle number: E01.1.0238.0119.18.1, Demo machine – has not previously been used in production. Being sold due to relocation. The xCUT is the ideal machine for customers requiring all-in-one label production. With the xCUT and a Memjet printer, it is possible to print, laminate, die-cut, and produce a finished label roll in a single pass. › Fully servo-controlled die-cutting unit › Digital printer can be integrated › High-precision re-registration › Integrated laminator The system die-cuts and laminates inline with a printing system at speeds of up to 12 meters per minute, or 28 meters per minute in rotary mode, making it suitable for higher volume jobs as well. Another benefit is that the die-cutting process is not decoupled from the printing process; both can be executed in a single operation. Although these machines may appear complex, they are significantly easier to operate compared to systems in the digital cutting segment. Unfortunately, the machine cannot be fully operated because the unwind unit is not functioning. We believe this could be resolved via a software adjustment, but since we do not have a support contact and the unit is not essential for our production, further effort is not worthwhile. The servo drive batteries should be replaced and the machine generally needs to be properly calibrated. A function test and demonstration can be arranged. We are happy to assist with shipping and disassembly. Die-plates in various formats, laminate, and label rolls are also included. Bledpsxzp H Tefx Afljr Schematics / documentation folder available.

Condition: ready for operation (used), Year of construction: 1986, Offered is a tensile testing machine year 1986 including hydraulic clamping jaws, load cell: PM 630 Rn, measuring-control unit: Doli EDC 580, nominal load: 600kN, clamping head distance: 150mm-650mm, piston stroke: 500mm, spare clamping head, machine dimensions X/Y/Z: 850mm/600mm/3200mm, machine weight: approx. 3500kg, calibrated annually. Inspection is possible by arrangement. Bodpfxexz Ewzs Aflelr

Year of construction: 2010, condition: excellent (used), controller manufacturer: SIEMENS, controller model: S7-1500, temperature: 250 °C, year of last overhaul: 2021, CONTROLS .. electronic controls SIEMENS S7-1500 CHARACTERISTICS HEAT TREATMENT EQUIPMENT Blodpfxexyvy Rs Afler .. temperature max.: 250 °C HEAT TREATMENT COMPARTMENT / ZONE .. heat treatment process: tempering .. heat treatment medium: water .. temperature max.: 250 °C .. length: 8000 mm .. width: 4300 mm .. diameter: 4300 mm DIMENSIONS / WEIGHTS .. space requirements -left/right-: 15000 mm .. space requirements -front/back-: 6300 mm .. total height: 6600 mm .. height above floor level: 5500 mm .. height under floor level: 1100 mm .. total weight approx.: 60000 kg ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz Electrically upgraded in 2021 (Siemens). - Has an aviation and aerospace certification. - Complete documentation of all calibrations - Monitoring system for temperature and pressure zones Operating temperature: 250 °C Operating pressure: 12.5 bar Operating hours: - Vacuum pump: 9,132 h - Fan: 15,497 h

Condition: ready for operation (used), functionality: fully functional, 1 x Loma Systems combination metal detector checkweigher with air blast reject into lockable bins. This unit meets full retail specification. Model - 7000. Blsdpfxsxl U Ide Aflsr Serial number - WO-002970. Metal detector aperture dimensions - 350mm wide x 150mm H (130mm useable). Weighing range - up to 20kg. Weighing platform - 410mm long x 230mm wide. Belt - 2700mm long x 230mm wide. Overall dimensions - 3000mm long x 1000mm wide x 1600mm high. Serviced and calibrated in September 2024.

Condition: used, mileage: 143,000 km, power: 169 kW (229.78 HP), first registration: 07/2017, overall weight: 11,990 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 4,623 mm, loading space height: 1,900 mm, Equipment: ABS, We are very pleased that our offer has attracted your interest and can already assure you that you will be able to purchase a high-quality and affordable vehicle with a traceable service history from our company! Certified BÖSE sliding wall body with rear load securing AHK MAUL Bjdpfsxynvwsx Aflolr AHK ball coupling GERMAN VEHICLE REGISTRATION / EXPORT SERVICES We organize your registration, export documents, EUR 1 certificate, and manufacturer's declaration for export purposes. FINANCING Upon request, we would be happy to provide you with a leasing, hire purchase, or financing offer. SERVICE TÜV roadworthiness inspection / UVV tail lift inspection / LGS test / tachograph calibration / installation of OBU device and maintenance services carried out by our authorized workshop prior to handover. TOLL / ROAD FEES Toll registration can be handled on site. TRAVEL / DISTANCES Wittlich train station: 500 m Frankfurt Airport: 150 km Frankfurt-Hahn Airport: 40 km Luxembourg Airport: 75 km Sale in accordance with our terms and conditions. The information provided online constitutes non-binding descriptions and does not represent guaranteed properties. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22, 54516 WITTLICH-Wengerohr.

Condition: excellent (used), For sale: a complete, professional magnetic particle testing (MT/NDT) kit from the renowned brands Tiede and Blak-Ray, used in industrial quality control, welding, rail transport, and the energy sector. The equipment is fully operational and in very good technical and visual condition—ready for immediate use. The set includes: • Tiede FSM-2 – magnetic field strength meter (Feldstärkemessgerät), measuring range ±400 A/cm, 9 V DC power supply • Blak-Ray J-221 – professional long wave ultraviolet meter for UV lamp verification in NDT applications • Field Indicator MAGNAFLUX – magnetic field indicator for quick induction checks • Measurement probe with cable • Calibration specimen and auxiliary accessories • Glass cylinder for indicator fluid • Original transport case with protective foam Bledpfx Ajxl Dbtsflor Applications: • Weld seam inspection • Shaft, axle, and machine component examination • Testing of railway, energy, and aviation parts • Quality control in industrial production

Condition: good (used), Year of construction: 2023, operating hours: 5,001 h, functionality: fully functional, X working area max.: 3000 mm Y working area max.: 1500 mm Control: TRUMPF Control based on Rexroth IndraMotion MTX Machine: - Closed machine frame - Hybrid axis system - Linear magazine with 24 slots for clamps and tools - Hydraulic clamps (3 pieces) - Drives with maintenance-free three-phase motors - Repositioning with programmable hold-down device - Foot pedal for clamp closing - Parts chute on the right Punching Head: - Delta Drive - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Punch lubrication spray system - Punch slug extraction - Forming function - Stroke counter for punches Control: - TRUMPF Control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Programmable cutting gas pressure - Automatic shut-off - Remote support interface - Program management - Production planning Data Transmission: - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Dual-beam safety light curtain Extended Standard Equipment: - 1st positioning pin (inside right) + Brush tables Blodsxxbwxjpfx Afler + MultiTool + Thread forming with thread counter + Thread-former breakage monitoring + Lubricant level monitoring + Marking/rapid beading + Deburring and rolling technology + Adaptive stroke calibration + Die lubrication spray system + Smart Punch Monitoring + Parts flap on the left + Parts conveyor belt for parts flap left + Collection tray for parts conveyor left + Sensor for parts chute + Parts conveyor for parts chute right + Additional clamp + 4x individually openable clamps + 4x height-adjustable clamps + Automatic clamp closing loading sensor system + Optical loading sensor + Automatic repositioning movement to compensate for loading tolerance + Repositioning device for DeltaDrive + Vibration-dampened installation + Chip conveyor with tilting bin + Machine status light + Warpage detection + Wireless Operation Point SheetMaster Compact 3000 x 1500 (AK05): - Loading station with spreading magnet for sheet separation - Suction frame - Vacuum sensors - Double sheet detection - Unloading cart for residual grids and microjoint sheets - Second operator station for loading and unloading + Compact setup for light grid and reference point system + Peeling system SortMaster Compact: - Machine-integrated automated small part removal - Suction frame for unloading good parts up to 600 x 400 mm (X x Y) - 2 suction bars (each suction cup individually controllable) - Unloading area 600 x 800 mm - Vacuum sensors for the suction circuits + X-axis extension - Extension of the unloading area to 1200 x 800 mm

Condition: used, STUDER CT 960 is an Internal grinding machine delivering precision, high accuracy and reliable performance. Working capacities: centre height 150 mm, grinding length 150 mm, X/Z travels 400 mm, wheel diameter 250 mm, spindle hole 35 mm; B-axis +61/-91°, rotatable head -5/+275°, turret with 4 spindles. Main specs: spindle speeds 6000 / 45000 / 60000 / 90000 rpm; X/Z feeds 12 m/min; air 6–10 bar; 3x 400 V 50 Hz; total power 34 kVA; weight ~4050 kg; dimensions L 3218 × W 2256 × H 2300 mm. Equipment: coolant system, measuring probe, diamond redresser, spindle cooling, flanges for internal grinding, tool holders, 3-jaw chucks Ø100/125/160, magnetic chuck Ø125/300, tool cabinet, lamp, fire system, electronic handwheel, external grinding spindle 6000 rpm, calibration accessories. Enables tight tolerances; suited to automotive, watchmaking, machine tools, aerospace and medical sectors. Bljdpsxx U Auofx Aflsr

Condition: excellent (used), For sale: a complete set of professional measuring stations from the renowned German brand ULTRA Germany, models: • ART. 27484-032 – POS. 12 • ART. 27484-033 – POS. 10 • ART. 27484-030 – POS. 8. The devices are designed for precise positioning, inspection, and calibration of mechanical and measuring components in production and quality control processes. An ideal solution for measurement laboratories, quality departments, research centers, or tool shops requiring high repeatability and accuracy. • Construction made of high-quality steel and aluminum – robust, stable, and durable • Precision linear guides ensure smooth movement and high measurement accuracy • Height adjustment and holder locking for quick adaptation to the tested component • Capability to mount dial indicators, holders, and other measuring accessories • A reliable solution for series measurements and part positioning in production processes. Condition: used, in very good technical and visual condition – devices are fully functional, sourced from a quality control department. Price refers to Blsdpfx Afjxltn Ajljr