Lathe S1100 fully equipped digital

Hans Schreiner MDB-S1100K-DIGITAL

Condition: new, Precision full gear, lead, pull, switching spindle Lathe, bed and gear wheels hardened and ground. Main spindle, tapered roller bearings and V-ledges, face/top slide adjustable. Camlock mount C5, top slide rotatable 360°. Tailstock adjustment +/- 5 mm for taper turning, High cutting performance, DIN acceptance protocol, Operating and spare parts list. Without oil filling. Standard equipment: 3-axis digital display. Base frame Kjdpfx Aevrv Enocfslw Foot brake Coolant system Halogen lamp 3-jaw American chuck 200 mm 4-jaw American chuck 200 mm Faceplate 250 mm 2 steady rests Technical data: Center height 180 mm Center width 1000 mm Max. turning diameter 506 mm Spindle bore 51 mm Tailstock taper MK 4 Spindle taper MK 6 Spindle speed 70 to 2000 rpm Speeds 8 Main motor output 2 kW S6 (1.5 kW S1) Weight 600 kg

Condition: new, Year of construction: 2026, Edge Sander Description: Sanding of curved materials using a side table. Simple and quick sanding belt replacement using a lever. Movable aggregate ensures horizontal and vertical operation. Additional table with adjustable height included as standard. Kodpfjvuggzjx Acfjlw Tensioning device ensures even sanding belt tension. Compact size of the device with a wide range of applications. Technical Data: Belt size: 2010 x 152 mm Worktable size: 790 x 221 mm Table height: 810 mm Stand height: 600 mm Additional rounding table size: 514 x 221 mm Maximum sanding length: 790 mm Dust extraction port diameter: 100 mm Edge and face sanding at an angle: 0 - 45° Belt speed: 840 m/min Motor power: 1.1 kW Power supply: 400 V Weight: 75 kg The price quoted is the net price. It does not include transportation costs

Condition: good (used), NHH lathe Turning diameter bed: 260 mm Turning diameter support: 160 mm Kljdpfxemw Ukcj Acfow Spindle bore: 26 mm Turning lenght: 600 mm Heidenhain digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Dimensions: 150x85x155 cm LxWxH

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Kodpfxsmhhf Se Acfslw Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Description Turning diameter over bed: 350 mm Turning diameter over support: 200 mm Turning length: 500 mm Speed range: 34-1500 rpm Space requirement approx.: 1600 x 1000 x 1400 mm Total power requirement: 2.2 kW Machine weight approx.: 1 t Kljdpfevkxiyox Acfew SYSTEM for thread cutting needs to be overhauled, not active. 1 used COLCHESTER STUDEN center & spindle lathe

Condition: new, Year of construction: 2026, spindle bore: 38 mm, turning diameter: 330 mm, turning length: 750 mm, total length: 1,330 mm, total width: 750 mm, total height: 700 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 60 rpm, overall weight: 320 kg, Universal Lathe 330 × 750 mm The machine is designed for machining workpieces, most commonly with surfaces of rotational solids (shafts, cones, spheres, internal and external threads). The machining tool is usually a turning tool, drill, or threading tools. Thanks to modern solutions and equipment, the lathe is perfectly suited for professional and industrial work. Equipment 3-jaw chuck 160 mm Coolant system Dead center MT3 Lathe stand Change gears for thread cutting Work light Optional equipment 2-axis digital readout (DRO) Ksdpfsyvfzqox Acfjlw Technical Specifications Turning diameter over bed – 330 mm Maximum workpiece length – 750 mm Maximum turning diameter over cross slide – 220 mm Chuck – 160 mm Spindle bore – 38 mm Spindle taper – MT5 Number of metric thread types – 20 Metric thread range – 0.5 – 4 mm Inch thread range – 9 – 40 T.P.I. Longitudinal feed – 0.135 – 1.80 mm/rev Tailstock quill travel – 70 mm Tailstock taper – Morse 3 Number of spindle speeds – 12 Spindle speed range – 60 – 1650 rpm Motor – 1.1 kW Dimensions (L × W × H) – 1330 × 750 × 700 mm Weight – 320 kg Delivery to the customer is possible. Delivery cost is determined individually according to the transport company quotation. If you are interested in other machines, please visit our website.

Condition: used, Lathe, taken directly from the workshop. In good working order. Price is negotiable. Comes with several accessories. Kljdpfx Aozgak Tscfsw

Condition: used, Tapping machine, pipe thread cutter -without tools Kjdpfx Aefyh Ebecfjlw -Operating voltage: 220 volts -Dimensions: 830/530/H1080 mm -Weight: 64 kg

Condition: new, Precision gear, lead screw, feed shaft, control rod turning lathe, bed and gear wheels hardened and ground, mainspindel, tapered roller bearings and V-ledge cross/top slide adjustable, camlock C4, top slide 360° rotable, tailstock adjustment +/- 5 mm for taper turning, high cutting capacity, Standard equipment: 3-axis digital readout systems base frame halogen lamp 3-jaw chuck 160 mm Kledovrv Ebepfx Acfew 4-jaw chuck 200 mm face plate 250 mm 2 follow rests Technical data: center height 165 mm distance between centers 1100 mm max. diameter of workpiece 460 mm cone spindle MK5 bore spindle 38 mm spindle speed 50 to 1500 RPM speeds 9 motor power 2 kW S6 (1,5 kW S1) weight 510 kg