Used Carbon for sale (744)

Condition: used, This listing is for the Hitech Instruments GIR250 Gas Analyser The unit is in full working condition and is ready for immediate use The GIR250 is a bench‑top / transportable analyser designed to measure oxygen (O₂) and carbon dioxide (CO₂) simultaneously in gas samples. It is made by Hitech Instruments (now part of the MTL / Eaton group). Its design emphasizes ease of use, reliability, and low maintenance cost. Other supporting features: The instrument can be programmed with pass/fail criteria for each gas (alarms). It provides analog outputs, typically 4–20 mA, for external logging or control systems. Calibration is designed to be simple (via the front panel keypad) to reduce training burden. The O₂ galvanic cell is user-replaceable (i.e. maintenance can be performed in the field). Mechanical, Electrical & Operational Details The GIR250 is housed in a rugged, transportable case (lab-style) so it can be used as a benchtop or mobile analyser. Sample inlet and outlet connections use 0.25″ (~6 mm) tubing. The sample system should avoid condensation and contaminants; non‑condensing sample environment is required. Operating ambient temperature: –5 to +40 °C (for non‑condensing conditions) Gedpfx Aboxhdqtjdjil Power / interface: standard for bench‑top analysers (the catalogue doesn’t always detail it, but likely mains or DC supply, suitable for lab use) Typical Applications & Suitability Because it can measure both O₂ and CO₂ in a single unit, the GIR250 is used in applications such as: Respiration / breathing gas analysis / Douglas bag analysis (i.e. in physiological or experimental gas mixture measurement) Fermentation / bioprocess monitoring (where O₂ and CO₂ both matter) Gas mixture / inertisation / process gas quality (checking gas purity, calibrating mixtures) It is not primarily intended for measuring very low trace levels (ppm-level) of O₂ or CO₂ unless its ranges are suitably adapted or specified. The design is more for percent-range analysis

Condition: used, Year of construction: 2017, Overview This PET filling line was manufactured between 1998 - 2017 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 10.500 - 18.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data Capacity: 10.500 - 18.000 bph Filling product: carbonated water and soft drinks  OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm)  condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Kosme | 2017 Elevator preform | Kosme | 2017 Rinsing/Filling/Capping | Tekal | 50/70/12 | 1998 Inspection machine | Heuft | 2010 Date coder | Printer Laser | 2017 Labelling machine | Sidel | 2017 Packing machine | SMI | 2002 Palletizer | SIPA | 2011 Pallet stretcher | SIPA | 2011 Mixing- and carbonating unit | Adue | 2013 Beverage analyzer | Maselli UR21 | 2009 Conveyors for empty PET bottles | Silga | 2017 Conveyors for filled PET bottles | Silga | 1998                                                                                             Conveyors for trays | Silga | 1998 Gsdpox Rrdcofx Abdoil

Year of construction: 2025, operating hours: 10 h, condition: new, functionality: fully functional, overall weight: 800 kg, total length: 120 mm, total width: 900 mm, total height: 1,900 mm, laser power: 30 W, laser wavelength: 1,064 nm, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English Giedexuvk Eopfx Abdjl - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2023, condition: like new (used), Nordcap ice cube maker with partial demineralization system The appliance comes directly from Miele and has only been used a few times in the test kitchen. Year of construction 2023 for hollow cube production Integrated storage container Water-bearing parts made from food-safe materials Positive spray system, fully automatic production control Automatic defrosting system (hot gas / fresh water) Dirt-prone components can be removed from the front, pre-installed drain nozzles Note: When installing the appliance, a wall clearance of at least 152 mm must be planned on site. Partial demineralization system Partial demineralization up to 5,600 l with silver-plated activated carbon for the supply of decarbonized water 0° dH (KH) Nordcap SDE 100 l Connection type: Ready to plug in Cooling type (machine): Air cooling External cladding: Stainless steel 1.4509, rounded edge protection Internal cladding: Polyethylene inner container, AGION® Antibacteria coating, deep-drawn in one piece Self-cleaning system Gross weight:74 kg Net weight:63 kg Climate class:5 (+40 °C UT and 40 % RH) External width:670 External depth:595 External height:981 Year of construction:2023 Refrigerant:R-452A Refrigerant charge:450 g Electrical connected load:0.83 kW | 230 V | 1 | 50 Hz Capacity:approx. 100 kg hollow cube / 24 h Hollow cube size W x D x H in mm: approx. 35 x 29 x 36 Energy consumption:16.00 kWh/24h List price Nordcap SDE 100 l: € 3,789.00 plus VAT List price partial demineralization: 849,00 € plus VAT plus VAT Gijdpfetrd Nzjx Abdjl PDF files: Data sheet Operating instructions Confo

Condition: excellent (used), Year of construction: 2021, Mileage: 2.021 km Drive: Wheel Empty weight: 408 kg Technical condition: very good Visual appearance: very good Transport dimensions (LxWxH): 3,1x1,5x1,95 Production country: NL Please contact Vink Machinery for more information Giodpfex I Rawjx Abdol Frisian Motors Leffert FM-50 * 2021 * Lithium battery drive * 1833 km * Dutch license plate * 3 speeds * Top speed 50 km/h * Glass windshield with wiper * Polycarbonate rear window * Tow bar * Built-in charger

Condition: used, mileage: 96,327 km, power: 160 kW (217.54 HP), first registration: 08/2022, fuel type: hybrid, next inspection (TÜV): 10/2027, color: black, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, * AMG LINE * AMG Sport Package * AMG Styling front spoiler and side skirts * AMG 18" alloy wheels * LED Multibeam headlights * Digital instrument cluster Gisdpfxjxitg Hs Abdol * Alcantara / partial leather seats * Front and rear parking sensors (PDC) with reversing camera * Navigation system * Automatic climate control * 8-speed automatic transmission * DAB radio * Traffic sign recognition * Lane keeping assist * Supersport leather multifunction steering wheel with shift paddles * Sound system * Ambient lighting * Cruise control * Heated seats * Rain sensor * Light sensor * Smartphone integration package (CarPlay & Android Auto) * Automatic high beam assist * Seat comfort package * MBUX multimedia system (digital multimedia system) * Active parking assist * Comfort suspension * Mirror package * Electrically adjustable, heated, and folding exterior mirrors * Light and visibility package * Trim elements in carbon optic * Drive mode selector "AGILITY SELECT" * EURO 6d emission standard * 4x electric windows * Tinted windows * On-board computer * Center armrest with storage compartment * USB and AUX-IN connection * Fog lights * ESP * Child safety system "ISOFIX" * Rear seat, split folding with through-loading option * ILS "Intelligent Light System" * 10.25" combined display * Hybrid 160 kW (Engine 1.3 liters – 118 kW) * AC charging function with 3.7 kW charging power * Charging cable SCHUKO CEE 7/7 (Type E/F) 8m * Charging cable MODE3 (Type 2, 3x16A, 11kW) 4m * Business package * High-end infotainment package * Smartphone integrated * Keyless Go * Remote central locking * 1 owner * Fully documented service history * Last oil service at 96,315 km on 01.10.2025 Vehicle number: 131 Whatsapp No.: For more vehicle offers visit: ONLINE CONSULTATION / ONLINE VIEWING / ONLINE PURCHASE CONTRACT / TRADE-IN OF YOUR USED CAR OR TRUCK / DELIVERY AT EXTRA COST Delivery service on request Foreign customers have the possibility to make a partial payment and collect the vehicle at a later date. NET export possible (for vehicles with VAT shown separately). We are happy to take care of your vehicle registration (Düsseldorf) as well as the issue of customs/export license plates or temporary registration plates (5-day). Full export processing possible (export declaration). Vehicles with TÜV used car inspection report available. Upon request we are happy to offer you our GPG used car warranty with individual solutions tailored to you and your vehicle. Trade-in possible. For further questions, please don't hesitate to call us. Opening hours: Monday - Thursday 09:00 - 16:30, Friday 09:00 - 16:00 Subject to change, errors, and prior sale. Offers are non-binding. All information without guarantee. Vehicle descriptions do not constitute guaranteed characteristics.

Year of construction: 2014, condition: used, This listing is for a 3M Zeta Plus 16EZA Encapsulated System Holder The unit is in excellent working condition and is ready for immediate release. The 3M Encapsulated System Holder is engineered to support Zeta Plus depth filtration and related downstream purification processes with optimal ergonomics, hygiene, and operational efficiency. It is specifically designed for biopharmaceutical and biotechnology applications where sterile, high-throughput filtration is required. This system holder accommodates encapsulated filter capsules—eliminating the need for a stainless-steel housing—and offers a pivoting, ergonomic frame that enhances operator safety and eases filter change-outs. Key Features Giedpfexl Dy Nox Abdol Pivoting Holder Design – The housing pivots between horizontal (waist-height) for loading/unloading and vertical for filtration mode, reducing operator strain and minimizing fluid spills during replacement. Vertical Flow Path Retained – Preserves the proven vertical flow design ideal for depth filtration with 3M Zeta Plus filters and compatibility with 3M polisher or chromatographic clarifiers. Torque-Limiter Sealing – Built-in torque limiter ensures the capsule shell is properly sealed before operation, protecting against leaks or misassembly. Encapsulated Shell Architecture – Eliminates the need for an external stainless-steel cartridge housing, thereby reducing facility clean‑in‑place (CIP) or validation overhead. Shell Options – Offers translucent polycarbonate shells for visual liquid level monitoring or polyphenylene oxide shells capable of sterilization and sanitization. Multiple Flow Configurations Supported – Enables Bottom-In / Bottom-Out and Top-In / Bottom-Out modes to optimize media usage and filter performance. Scalable Modules – Available in pilot and full-production configurations, facilitating scale‑up from lab to manufacturing scale within a unified system design. Technical Specifications Parameter Description Model / Part No. Housing 16EZA1 Flow Path Vertical flow design, compatible with multiple flow directions Shell Materials Polycarbonate or polyphenylene oxide options (sterilizable) Holder Orientation Pivoting between horizontal (load/unload) & vertical (operational) Sealing Mechanism Torque‑limiter style sealing indicator Operational Scale Supports systems from small pilot scale up to production scale (0.5 L to >2,500 L) Filtration Compatibility 3M Zeta Plus depth filters, 3M Polisher ST, 3M Emphaze AEX Hybrid Purifier, 3M Harvest RC, etc. Footprint Compact vertical footprint; reduced spatial demand in filtration suites Applications Clarification of mammalian cell cultures prior to downstream purification Protection of downstream membranes and chromatography resins via depth filtration Clarification of bacterial, yeast, or insect cell lysates Removal of host cell proteins (HCP), DNA, endotoxins, and particulates Pre‑polishing or polishing after capture chromatography Viral clearance modes in downstream workflows Benefits & Value Proposition Enhanced Ergonomics & Safety – The pivoting design reduces the need to lift used capsules overhead, lowering risk of spills and operator fatigue. Lower Validation Burden – Because the system is fully encapsulated, no external housing cleaning or validation is needed in the customer’s site. Operational Versatility – Flexibility in shell types, flow configurations, and scale continuity from pilot to production. Visual Process Monitoring – Translucent shell...

Condition: good (used), clear span: 1,400 mm, total length: 7,510 mm, shelf height: 1,750 mm, Technical data for the pallet racking system: Rack system: Stow Model: Pal Rack NS Technical data for installation: Number of rack rows: 01 unit Length per rack row: approx. 7,510 mm Number of bays per rack row: 05 units á 1,400 mm Number of levels plus ground level: 02 units Scope of delivery includes: 06x pallet rack uprights, used Material color: RAL 5015 sky blue Upright type: PNFB12 Godpfx Aew I R Slsbdeil Profile dimensions: 85 x 65 x 1.75 mm Including horizontal and diagonal bracing, base plates The uprights are pre-assembled (bolted lattice construction) 1,750 mm high 1,100 mm deep 20x pallet rack beams, used Material color: orange U-profile: 150 x 50 x 3.00 mm Connector: 4 HK (hooks) Design: header beam Clear opening: 1,400 mm 40x safety pins, used Material color: Sendzimir galvanized For securing the cross beams against accidental lifting 24x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: carbon steel, galvanized Approved for: cracked concrete 12x shimming plates, used Finish: fully galvanized For leveling rack uprights positioned on uneven floors 01x load sign With information on bay and compartment loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. If transport or dispatch is required, additional costs will be incurred, which can be quoted separately depending on delivery location and scope.

Year of construction: 2025, condition: new, functionality: fully functional, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. Godpfowkpxkox Abdsil The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: used, This listing is for a Thermo Scientific FiberLite F14-6x250y Centrifuge Rotor. The unit is in full working condition and is ready for immediate release. The Thermo Scientific FiberLite F14-6x250y Centrifuge Rotor is a robust and highly functional component designed for a variety of laboratory applications. Here is a comprehensive overview of its key features, specifications, and benefits: Key Features and Specifications Capacity: Accommodates 6 tubes with a volume of 250 mL each Maximum Speed: 10,000 rpm (up to 14,000 rpm for compatible centrifuge models) Maximum RCF: 15,316 x g (up to 30,100 x g for some compatible models) Rotor Angle: Fixed angle of 23° K Factor: 2737 Maximum Tube Dimensions: Gisdpfexxz Siex Abdjl Length: Up to 125 mm Diameter: Up to 62 mm Radius (Metric): Minimum radius of 3.7 cm Biocontainment: Yes, designed for safe handling of samples Key Benefits Lightweight and Innovative Construction: Made from carbon fibre, allowing for rotor designs that are not feasible with traditional metal technologies. Durability: Corrosion and fatigue-resistant materials ensure the structural integrity of the rotor, promoting long-term reliability. Long Warranty: Backed by a 15-year warranty, providing confidence in the product’s quality and performance. Auto-Lock Rotor Exchange: Features a secure, push-button rotor exchange mechanism that allows for quick swapping of rotors in less than three seconds, streamlining the workflow in the laboratory. This centrifuge rotor is tailored for both research and clinical settings, offering unique advantages that enhance user experience and operational efficiency while delivering reliable performance.

Condition: good (used), clear span: 1,450 mm, total length: 7,760 mm, shelf height: 1,750 mm, Technical details for the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical setup data: Number of rack rows: 01 pc. Length per rack row: approx. 7,760 mm Number of bays per rack row: 05 pcs. at 1,450 mm each Number of levels plus ground level: 02 pcs. Currently in stock: approx. 2 sets! Scope of delivery includes: 06x pallet rack frames, used Material color: RAL 5015 sky blue Frame type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Including horizontal and diagonal braces, base plates Frames are pre-assembled (bolted construction) 1,750 mm high 1,100 mm deep 20x pallet rack beams, used Material color: orange Beam type: PNBH0443/1.5 Box profile: 130 x 50 mm Connector: 4 hooks Design: box end beam Clear width: 1,450 mm 40x locking pins, used Material color: sendzimir galvanized For securing the beams against accidental lifting 24x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: carbon steel, galvanized Approved for: cracked concrete 12x leveling shims, used Giodpfx Abew I Sx Tjdol Design: fully galvanized For leveling rack frames installed on uneven floors 01x load plate With information on bay and compartment loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. Any requested transportation or shipping of this item is associated with additional costs, which can be provided upon request depending on the delivery location and scope.

Year of construction: 2025, condition: new, functionality: fully functional, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge - Fiber laser 20 Watt (Optional: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) Gedew Et Ilopfx Abdeil - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Year of construction: 2012, condition: used, This listing is for a Haier ULT Ultra Low Freezer. The unit is in full working condition and is ready for immediate release. Gedpfxjxxx Hws Abdoil Overview: Haier Biomedical offers a range of ultra-low temperature (ULT) freezers specifically designed for the secure and long-term storage of sensitive biological products. These include viruses, germs, erythrocytes, leucocytes, and cutis. The units are ideal for hospitals, research institutions, and laboratories. Key Features: Reliable Performance: Cabinet temperature can reach –86 ℃, with temperature uniformity within 6 ℃ (or 5 ℃ for model WD-86L728J). Energy Saving: Four independent inner doors and a four-layer sealing structure ensure excellent heat insulation, reducing energy consumption. Power consumption for model WD-86L728J is only 10.5 kWh/day. Highly efficient cooling fans and compressors combined with hydrocarbon refrigerants provide significant energy savings and long-term sample security. Low Noise Operation: Innovative refrigeration system design with quiet fans and compressors minimizes noise during operation. Secure Storage: Each unit features a lockable handle with a unique key specific to that unit. Additional padlock space enhances sample security. Drawer System: Multi-layer drawer system makes it easy to store and sort samples efficiently. Pressure Equalisation Port: Heated port prevents icing on the vent and allows users to reopen the main door soon after accessing the freezer. USB Interface: Enables users to download historical temperature data for compliance and auditing purposes. Alarm Functions: Multi-level audible and visual alarms include alerts for: High/low temperature Sensor error Power failure High ambient temperature Clean filter Door ajar Temperature Control: Temperature range from –86 ℃ to –40 ℃, adjustable in 1 ℃ increments, ensuring optimal storage conditions. Choice of Models: Models available with stainless steel interiors for added durability. Adjustable and Mobile Design: Adjustable feet at the front and castors at the back ensure stability and mobility. Additional Features: Energy Efficiency: Freezers utilize advanced insulation and hydrocarbon refrigerants for reduced energy consumption and environmental impact. TwinCool Technology (on select models): Two independent refrigeration systems provide continuous operation and sample protection even if one system fails. User-Friendly Interface: Equipped with large LED displays or touchscreen interfaces for real-time monitoring of cabinet temperature, set temperature, ambient temperature, and input voltage. Applications: Haier’s ULT freezers are suitable for storing a wide range of biological materials in healthcare, clinical, and research environments. Their reliability, security features, and energy efficiency make them a trusted choice for safeguarding valuable samples.

Condition: good (used), Technical Specifications for the Pallet Racking System: Racking System: Mecalux Technical Specifications for Installation: Number of rack rows: 01 unit Length per rack row: 17,625 mm Number of bays per rack row: 09 units Number of levels plus ground level: 02 units Volume Specifications: Pallet spaces per bay: 06 units Number of pallet spaces per row: 54 units Total number of pallet spaces: 54 units Included in scope of delivery: 10x pallet rack uprights, used Material finish: sendzimir galvanized Frame profile: 120 x 69 x 1.75 mm Including horizontal and diagonal bracing, base plates Uprights are pre-assembled (bolted lattice work) 2,000 mm high 1,100 mm deep 36x pallet rack beams, new Material color: RAL 2001 orange Beam type: TB-S 100 Box section profile: 100 x 50 mm Clear width: 1,825 mm Max. load per pair of beams: 2,000 kg with evenly distributed load 72x integrated safety pins, new For securing the longitudinal beams against unintentional lifting 40x wedge anchors, new Gisdpfovzappsx Abdel Manufacturer: Hilti Model: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 20x leveling plates, used Version: fully galvanized For leveling the rack uprights installed on uneven floors 01x load capacity sign with field and compartment load details, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transportation or shipping is required, this will incur additional costs. Please enquire with us for exact costs, which vary depending on delivery location and scope.

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system Gijdpfxev Sybyj Abdol - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Condition: used, This listing is for the ATi f12/D Gas transmitter The units are in full working condition and ready for immediate use ATi F12/D Gas Transmitter Overview The Series F12D Gas Transmitter is designed for detection of a variety of toxic gases in hazardous area applications. In addition, it is also well suited for general-purpose environments where toxic gas measurement is required. The F12D is highly customizable, making it adaptable to nearly every fixed-mount toxic gas monitoring application. Key Features Extensive Gas Detection Supports over 60 interchangeable electrochemical sensors for detecting gases such as chlorine, ammonia, hydrogen sulfide, formaldehyde, nitric oxide, phosgene, and more. Auto-Test Function An integrated Auto-Test system uses a real gas sample to verify sensor function—eliminating the need for manual bump tests and ensuring operational integrity. Smart Sensor Technology H10 Smart Sensors store their own calibration data and can be swapped out in the field without recalibration, reducing maintenance time and cost. Rugged, Durable Design The F12D features a polycarbonate enclosure with stainless steel hardware, IP65 ingress protection, and is corrosion-resistant for harsh environments. Flexible Power Supply Options Operates on 12–24 VDC, 115 VAC, or 230 VAC to suit various site requirements. Communication Capabilities Offers RS-232/485 output and optional HART® or Modbus RTU for seamless integration into digital control systems. Highly Customizable for Diverse Applications The F12D offers broad configuration options, making it suitable for: Hazardous Areas (e.g., chemical plants, refineries) General Industrial Use (e.g., wastewater treatment, food & beverage, laboratories) Customization Options Include: Sensor Holder Styles Integral mount Remote mount (6 ft cable) Duct mount Giedpfxjxv Dnze Abdsl Auto-Test Gas Generators Available for chlorine, ammonia, hydrogen sulfide, sulfur dioxide, and others. Digital Interface Upgrades Optional HART and Modbus interfaces for advanced integration and data transmission

Condition: good (used), Technical data for the pallet racking system: Racking system: Dexion Type: P 90 Technical data for the setup: Number of rack rows: 01 pcs. Length per rack row: 14,100 mm Number of bays per rack row: 05 pcs. Number of levels plus ground level: 03 pcs. Technical data for volume: Pallet spaces per bay: 12 pcs. Number of pallet spaces per row: 60 pcs. Number of pallet spaces total: 60 pcs. Based on: Load carrier: Euro pallet EN 13698-1 Godownfp Topfx Abdjil Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 900 kg Included in the scope of delivery: 06x pallet rack uprights, used Material color: sendzimir galvanized Type: 100|25 Profile dimensions: 100 x 100 x 2.5 mm Incl. horizontal and diagonal braces, foot plates The uprights are pre-assembled (bolted truss) 6,000 mm high 1,100 mm deep 30x pallet rack beams, used Material color: sendzimir galvanized Box profile: 100 x 50 mm Beam type: SLB 100|15 Bracket: 5 HK Clear span: 2,700 mm Max. load per pair of beams 2,700 kg, with evenly distributed load 60x safety pins, used Material color: sendzimir galvanized For securing the longitudinal beams against unintentional lifting 24x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Version: carbon steel, galvanized Approved for: cracked concrete 12x shims, used Version: completely galvanized For leveling the rack uprights set up on uneven floors 01x load sign With data for bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipment of this item is associated with additional costs, which can be requested from us separately, depending on the delivery location or scope of delivery.

Condition: used, This listing is for a Walker Safety Cabiets All-In-One Fumigation Unit. The unit is in full working condition and is ready for immediate release. The Walker Safety Cabinets All-In-One Fumigation Unit is an innovative and compact solution for fumigating safety cabinets of all makes and models. Designed with efficiency and convenience in mind, this unit combines a built-in boiler and a carbon filtration system into one easy-to-use device. Gedpfx Absxxx R Nedjil Key Features: - Compact Design: Height: Less than 200 mm, allowing it to fit inside a typical safety cabinet opening without the need to open the door further. - Integrated System: Combines a boiler and carbon filtration system, ensuring comprehensive fumigation in a single device. - Capacity: Maximum capacity of 30 ml of formaldehyde and 30 ml of water, making it effective and economical for fumigation processes. - Carbon Filtration: Replaceable Carbon Granules: Requires replacement after each use to ensure optimal performance. - Fresh Supply: Carbon granules are inexpensive and readily available, with a typical shelf life of approximately 18 months. - Walker Safety Cabinets ensures quick delivery of replacement granules for uninterrupted operation. - Benefits: Versatile Compatibility: Effective for fumigation of all safety cabinet brands and models. - Efficient Operation: The compact, integrated design minimizes space requirements while maximizing performance. - Cost-Effective Maintenance: Affordable and easy-to-replace carbon granules keep operating costs low. Applications: - The All-In-One Fumigation Unit is ideal for laboratories and facilities that require effective and convenient fumigation of safety cabinets, ensuring a safe and sterile work environment.

Condition: good (used), Shelf upright: 3,100 mm x 1,100 mm / Clear width: 2,700 mm Technical data of the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 14,340 mm Number of bays / rack row: 05 pcs. á 2.700 mm Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Pallet spaces per row: 45 pcs. Total pallet spaces: 45 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 dimensions: 1.200 x 800 x 150 mm total height incl. pallet: n.d. Weight per pallet ( max. ): 1.000 kg Included in delivery: 06x pallet rack stand, used material color frame: sendz. galvanized Material color framework: blue Profile dim.: 140 x 80 x 2.25 mm Incl. cross and diagonal braces, Base plates The stands are pre-assembled ( screwed truss ) 3.100 mm high 1.100 mm deep 20x pallet rack traverse, new Material color: Ral 2004 orange box profile: 130 x 50 mm type of cross beam: PNB 0413 S355MC agraffe: 4 HK (hooks) clear width: 2.700 mm max. load per truss pair 3.000 kg with evenly distributed load 40x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out Giedsm Eyk Hepfx Abdel 24x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 12x shims, used execution: complete galvanized for levelling of the racks which are are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 297 x 210 x 2 mm

Condition: good (used), Shelf upright: 9,650 mm x 800 mm / Clear width: 2,700 mm Technical data of the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 17.180 mm Number of bays / rack row: 06 pcs. á 2.700 mm Number of levels plus floor level: 05 pcs. Included in delivery: 07x pallet rack uprights, used material color frame: sendz. galvanized material color framework: blue profile dim.: 140 x 80 x 2.25 mm Incl. cross and diagonal braces, Base plates The stands are pre-assembled ( screwed truss ) 9.650 mm high Giedpfom Eztuex Abdol 800 mm deep 60x pallet rack truss, new Material color: Ral 2004 orange box profile: 130 x 50 mm type of cross beam: PNB 0413 S355MC agraffe: 4 HK (hooks) clear width: 2.700 mm max. load per truss pair 3.000 kg with evenly distributed load 120x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out 28x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 14x shims, used execution: complete galvanized for levelling of the racks which are are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 297 x 210 x 2 mm

Condition: good (used), clear span: 2,600 mm, load per truss pair (max.): 1,500 kg, shelf height: 5,950 mm, shelf length: 13,600 mm, Technical data for the pallet racking system: Racking system: SLP Technical data for installation: Number of rack rows: 01 pcs. Rack length: approx. 13,600 mm Number of bays per row of shelves: 05 pcs. 2,600 mm each Number of levels plus floor level: 04 pcs. The scope of delivery includes: 06x pallet rack uprights, used Material color: blue Frame type: TC15 Profile dimensions: 100 x 80 x 1.50 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled ( welded framework ) 5,950 mm high 750 mm deep 40x pallet rack traverse, used material color: blue Box profile: 90 x 50 mm Beam type: RTS90 Agraffe: 3 HK (hooks) clear width: 2,600 mm Max. load per pair of beams 1,500 kg with evenly distributed load 80x safety pins, used Version: completely galvanized To secure the longitudinal beams against unintentional lifting out 24x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x shims, used Design: completely galvanized Gjderdfrhspfx Abdsil For leveling the shelf uprights that are are set up on uneven floors 01x load plates with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm General information about the item: This item is only offered for collection. Any other desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 24,450 mm Number of bays / row of shelves: 13 units of 1,800 mm each Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 06 pcs. Pallet spaces per rack row: 78 pcs. Total pallet spaces: 78 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,400 kg The scope of delivery includes: 14x pallet rack uprights, used Material color: sendzimir galvanized Frame type: P73 Profile dimensions: 75 x 75 x 2.00 mm Incl. cross and diagonal braces, foot plates The uprights are pre-assembled (bolted framework) 2,000 mm high 1,050 mm deep 52x pallet rack beams, used Material color: RAL 5010 gentian blue IPE profile: 80 x 46 mm Beam type: TRV1-180-08-l Agraffe: 4 HK (hooks) Clear width: approx. 1,800 mm Max. load per truss pair 2,800 kg, with evenly distributed load 104x locking pin, used Material color: sendzimir galvanized Giodpfx Abeubv D Rjdjl To secure the longitudinal beams against unintentional lifting out 56x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 28x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transportation or shipment of this item is associated with additional additional costs, which can be requested separately depending on the or scope of delivery can be requested from us.

Condition: good (used), Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 19,100 mm Number of bays / row of shelves: 10 units of 1,800 mm each Gijdsub R Eiepfx Abdol Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 06 pcs. Pallet spaces per rack row: 60 pcs. Total pallet spaces: 60 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,400 kg The scope of delivery includes: 11x pallet rack uprights, used Material color: sendzimir galvanized Frame type: P173 Profile dimensions: 100 x 75 x 2.00 mm Incl. cross and diagonal braces, foot plates The uprights are pre-assembled (bolted framework) 2,000 mm high 1,050 mm deep 40x pallet rack beams, used Material color: RAL 5010 gentian blue INP profile: 80 x 42 mm Beam type: TRV1-180-08-l Agraffe: 4 HK (hooks) Clear width: approx. 1,800 mm Max. load per truss pair 2,800 kg, with evenly distributed load 80x locking pin, used Material color: sendzimir galvanized To secure the longitudinal beams against unintentional lifting out 44x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 20x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transportation or shipment of this item is associated with additional additional costs, which can be requested separately depending on the or scope of delivery can be requested from us.

Condition: good (used), clear span: 2,700 mm, total length: 16,760 mm, load capacity: 2,100 kg, shelf height: 3,200 mm, Technical Data for the Pallet Racking System: Racking System: Jung Heinrich Type: Delta Technical Data for Installation: Number of racking rows: 01 pcs. Length per racking row: approx. 16,760 mm Number of bays per row: 06 pcs. at 2,700 mm each Number of levels plus floor level: 02 pcs. Technical Data for Capacity: Pallet spaces per bay: 09 pcs. Pallet spaces per row: 54 pcs. Total pallet spaces: 54 pcs. Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Max. pallet weight: 700 kg Scope of supply includes: 07x pallet racking uprights, used Colour: blue Profile dimensions: U 80 x 60 x 3.00 mm Incl. horizontal and diagonal bracing, base plates Uprights are pre-assembled (welded steel rack structure) Height: 3,200 mm Depth: 1,050 mm 24x pallet racking beams, used Colour: yellow Box profile: 120 x 50 mm Gedpfsw Nv Etsx Abdoil Beam type: HN120|30 Beam connector: 3 HK (hooks) Clear span: 2,700 mm Max. load per pair of beams: 2,100 kg with evenly distributed load 48x safety pins, used Finish: Sendzimir galvanized For securing longitudinal beams against unintentional lifting 28x anchor bolts, new Manufacturer: Hilti Type: HST2 M12x105/10 Version: Carbon steel, galvanized Approved for: cracked concrete 14x shim plates, used Version: fully galvanized For leveling racking uprights installed on uneven floors 01x load sign With specifications for bay and compartment loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for pickup only. Additional transport or shipping of this item is subject to additional costs, which can be requested from us depending on delivery location and scope of delivery.

Condition: good (used), Technical Data for the Pallet Racking System: Racking system: Jung Heinrich Type: MPB Technical Data for Installation: Gisdjw Rnvaspfx Abdsl Number of rack rows: 01 pc. Length per rack row: 64,980 mm Number of bays per rack row: 23 pcs. Number of levels incl. ground level: 06 pcs. Technical Data for Capacity: Pallet spaces per bay: 21 pcs. Pallet spaces per rack row: 483 pcs. Total pallet spaces: 483 pcs. Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n/a Max. weight per pallet: 400 kg Scope of Supply: 24x pallet rack uprights, used Colour: blue Upright type: STD'DB'30 Profile dim.: 120 x 92.5 x 2.5 mm Incl. horizontal and diagonal braces, base plates Uprights are pre-assembled (bolted lattice structure) Height: 11,500 mm Depth: 1,100 mm 276x cross beams, colour: RAL 1007 daffodil yellow Box profile: 80 x 50 mm Beam type: AUF'B'E0488 Connector: 4 HK (hooks) Clear span: 2,700 mm Max. load per beam pair: 1,200 kg with evenly distributed load 552x safety pins, used Material finish: sendzimir galvanized For securing the longitudinal beams against accidental lifting 96x stud anchors, new Manufacturer: Hilti Model designation: HST2 M12x105/10 Version: carbon steel, galvanized Approved for: cracked concrete 48x leveling shims, used Finish: fully galvanized For leveling rack uprights installed on uneven floors 01x load capacity sign with indication of bay and compartment loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is only available for collection. Any transportation or shipping required beyond this is subject to additional charges, which can be quoted upon request depending on delivery location and scope.