Used Carpentry for sale (172)

Condition: used, Year of construction: 2019, No. 3243 Compressor & refrigeration dryer Schneider AM D 15-13 XVS & DK 7700 SMART Used, year of construction 2019, 6241 operating hours System in very good condition, comes from former carpentry business Package consisting of screw compressor, refrigeration dryer, compressed air tank, condensate drain, pre-filter, ultra-fine filter, oil-water separator and all existing pipes and connectors - Screw compressor Schneider AM D 15-13 XVS Compression end pressure 12.5 bar Working pressure 5 - 12.5 bar Volume flow 258 - 2214 l/min Motor power 15 kW - Refrigeration dryer Schneider DK 7700 SMART Volume flow 7700 l/min Operating pressure 7 - 14 bar - Compressed air tank Schneider BH-VZ 2000-11 Pressure 11 bar Tank volume 2000 l - Condensate drain Schneider KAL-Ecomat 20000 - Pre-filter Schneider VF-DVP 80 - Ultra-fine filter Schneider FF-DFP 80 - Oil-water separator Schneider OWS-Öwamat 14 - All existing pipes and connectors Sale on behalf of the customer, ex location near 88662 Überlingen, without dismantling, transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price Nwodpfx Afexc H Sishob To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, With the cost-effective single-shaft shredders of the ZWS series, a wide range of shredding tasks can be realized, e.g. as a preliminary stage for subsequent briquetting, for the production of wood chips for firing or return to the particleboard industry. Depending on throughput and material, the machines can still be individually adapted to the task. Typical feed materials for shredding are: Large panel and board sections Wooden pallets Waste from carpentry workshops Nwodpfoghgdgex Afhob Packaging wood Construction and demolition wood Veneers, MDF and chipboard

Condition: good (used), Code: 0222 Brand: FRAVOL Model: A 16-S - CE Standard Nwsdpsxmg N Nefx Afhjb Edge bander with trimmer for curved and straight panels, with glue tank for wood, pvc, abs, veneer edges, for furniture, kitchens, panels, carpentry, custom-made furniture - CE Standard Technical data: Min-max panel height mm 10-60 Edge thickness mm 0,4-3 Min edging radius mm 20 Motorized conveyor belt Variable feed speed mt/min 25/12 Tilting table Air pressure 6 bar Overall dimensions mm 1150 x 950 x 1300 h Weight kg 300 Upper and lower trimmer unit POLYMAC BIESSE SPEEDY 90 2 high-frequency motors adjustable in height Trimming height mm 12-60 Operating pressure bar 6 Suction mouth diameter mm 60 Overall dimensions mm 1000 x 950 x 1300 h Weight kg 110

Condition: good (used), Code: 0254 Brand: STROMAB Model: CT 800 - CE Standard Cutting centre for beams, wood carpentry, wooden roofs, sawmill, balconies, and various - CE Standard CE Standard Technical data Blade diameter mm 800 Motor power Hp 20 N° 5 axis controlled by programmer : Saw table rotation ( 0-340°) - Speed of the saw table rotation 9 sec. each 180° - Blade beveling from 90° to 45° (speed of the blade beveling 20 sec.) - Height of the blade above the table ( speed 15 sec. each 10 cm) - Beam positioning and measuring ( speed 17 mt/min) - Motorized positioning of the saw table compared to the saw fence mm 600 Photocell for the automatic reading of workpiece beginning Cutting capacity at 90° with single stroke: mm 280 x 290 / 250 x 390 / 200 x 450 At 90° with saw table sliding and repeted cut mm 280 x 770 / 250 x 840 At 45° with single stroke mm 200 x 210 At 45° with saw table sliding and repeted cut mm 200 x 760 Maximum ripping height mm 300 Cutting precision : +/- 2 mm on 10 mt beam (straight beam ) - +/-0,2° on rotation edge of the table - +/-0,2° on inclination angle of the blade Control by industry-standard PC Touch- Screen - Windows Operating System - USB ports - Ethernet Rollers: : n° 4 idle rollers benches mt. 2 with rollers diameter 133 mm Widia blade diameter 800 mm Compressed air 6/7 bar Overall dimensions of mounted machine with roller conveyors: mm 7000 x 2600 x 2200 h Nedpfx Aerzqy Njfhowb Machine weight kg 2900 Total weight kg 3400 (Machine + roller benches)

Condition: good (used), Code: 0456 Brand: MEBER - ITALY Model: BEST 800 - CE Standard Industrial band saw with feeder for wood, semi-finished products, window frames , laminated timber, beams, boards, sawmills, carpentry and various - CE Standard Features: Sturdy construction Ergonomic position of the control panel board Integral blade guard Scrapers with brass blade for good cleaning of the flywheels Flywheel diameter mm 800 Table dimensions mm 1300 x 800 Nodpfx Afewn H Iwshjwb Cutting capacity: height x width mm 380 x 750 Blade width mm 80 Flywheel revolutions min 700 Blade length mm 5090 Motor power Hp 20 Feeder R1 : Fitted with a toothed drive roller and a support fence with idle rollers which can be positioned manually - Roller position is adjustable - Feed speed variator Roller height mm 235 Roller diameter mm 215 Max roller-blade distance mm 290 Max distance fence-blade mm 200 Fence dimensions: mm 490 x 290 x 260 Machine dimensions with mounted resaw mm 1200 x 1900 x 2500 h Total weight kg 1580

Condition: new, Code: N0022 Brand: ARIATECH Nwedpfou S N T Hsx Afhjb Model: ATB 2 - CE Standard Professional wheeled dust collector with 2 filter bags for dust and chips from carpentries, machine shops and various - CE Standard Structure in sturdy galvanized sheet metal Wheeled base to be able to be moved around the workshop and be connected to more machines Can be mounted indifferently either with the suction mouth facing upward or downward Motor Hp 4 ( Kw 3) Diameter of nylon bags mm 500 Diameter of plastic collection bags mm 500 Overall dimensions of assembled machine mm 1700 x 600 x 2500 h Overall dimensions of disassembled and packed machine mm 1750 x 800 x 800 h Weight kg 130

Condition: good (used), Code: 0187 Brand: MASTERWOOD - ZANGHERI E BOSCHETTI Model: LIGNA Nwedpfx Afsw D E Unjhjb 3-group multiple boring machine for carpentry, furniture, custom-made furnishings, panels and various Technical data: 1 horizontal boring unit with 21 spindles 1 vertical boring unit with 2 transverse heads with 21 adjustable spindles that can also be positioned longitudinally Steel guide with millimetre scale and 32 pitch scale for positioning stops and pneumatic pressers Spindle centre distance 32 mm Threaded drill bit attachment 2 pneumatic pressers that can be positioned to lock the panel Max panel thickness 90 mm Horizontal boring depth 85 mm Motor power Hp 2,5 Operating pressure 6-8 atm Overall dimensions mm 1850 x 1200 x 1600 h Weight kg 630

Condition: good (used), Code: 0190 Brand: MASTERWOOD Model: PROJECT TF 100 - CE Standard CNC point to point throughfeed boring machine for panels, furniture, custom-made furniture, kitchens, bathroom furniture, carpentries and various - CE Standard Features: Robust clamping device for panel translation running on linear guides with preloaded ball bearings and moving by means of ball screw with high precision and stiffness. Brushless motor Working table: table with idle rubber wheels for panels in and outfeed . Panel movement on air film to avoid any scratching of panels with delicate surfaces . Panel pusher for smooth and accurate movement. Longitudinal sinking reference stop. Automatic reading of panel length Operating unit: boring head with vertical and horizontal spindles plus grooving saw unit. Centralised chips suction outlet Numeric control with PC: Windows operating system - network connection MASTERWORK software: Masterwood system for automatic drawing and programming - Boring, cutting programming with boring cycle optimisation Technical data: X-Y-Z axis strokes mm 1670-1330-87 Max displacement speed of X-Y-Z axis mt/min 25-50-25 Working range: width min/max mm 80/1000 - Length min mm 250 - Lenght max unlimited - Thickness min/max mm 10/60 Drilling head: n° 5 X axis independent vertical spindles - n° 5 Y axis independent vertical spindles - n° 2 X axis double horizontal spindles - n° 1 Y axis double horizontal spindle Spindles pitch 32 mm Nodpjw Emgbsfx Afhewb Motor power 1,7 Kw Spindles revolution speed 4000 rpm Sawing unit - Motore Kw 1,7 - Blade diameter mm 125 - 4000 rpm Working air pressure 7/8 bar Overall dimensions mm 2400 x 1990 x 1600 h Weight kg 1300

Condition: good (used), BACCI DOUBLE JET Nwedpfx Afsxr Dduohjb The BACCI DOUBLE JET machine with a KUKA robot is an advanced, automated CNC machining center dedicated to the production of wood and wood-based components. The KUKA robot works with the machine's integrated feeder to automatically feed material for processing, significantly increasing efficiency and minimizing the need for manual operation. After the milling and grinding process is complete, the robot automatically retrieves finished parts and places them on pallets, streamlining production logistics and enabling continuous operation without interruptions for manual reloading. This system ensures seamless integration of the robot with the BACCI DOUBLE JET machine, which features dual machining heads and 12 interpolated axes, enabling simultaneous and precise machining of components. Automated material loading and unloading and the integrated feeder system increase efficiency and production repeatability while reducing labor costs and improving operator safety. This machine is primarily used in the furniture and carpentry industries, where high standards of quality and efficiency are required.

Condition: good (used), BACCI DOUBLE JET The BACCI DOUBLE JET machine with a KUKA robot is an advanced, automated CNC machining center dedicated to the production of wood and wood-based components. The KUKA robot works with the machine's integrated feeder to automatically feed material for processing, significantly increasing efficiency and minimizing the need for manual operation. After the milling and grinding process is complete, the robot automatically retrieves finished parts and places them on pallets, streamlining production logistics and enabling continuous operation without interruptions for manual reloading. This system ensures seamless integration of the robot with the BACCI DOUBLE JET machine, which features dual machining heads and 12 interpolated axes, enabling simultaneous and precise machining of components. Automated material loading and unloading and the integrated feeder system increase efficiency and production repeatability while reducing labor costs and improving operator safety. This machine is primarily used in the furniture and carpentry industries, where high standards of quality and efficiency are required. Nwodpexr Dcwsfx Afhjb

Condition: new, With air flow rates of up to 22,000 m³/h, the stationary compact filter systems of the ECO JET series offer a wide range of applications. They are the ideal extraction solution for machines in various manufacturing sectors and industries, including larger processing machines. Eligible for BAFA funding according to Module 4. ECO JET series systems are equipped with fans arranged on the clean air side, which draw the dust- and chip-laden air towards the filter unit. In the most powerful DUO models, two fans are connected in parallel. A flange at the filter unit inlet enables the connection of custom duct diameters. The aerodynamically optimized airflow in the separation chamber allows coarse particles to be separated directly, without reaching the filter bags. Residual dust collected by the filters is automatically cleaned by the AL-KO OPTI JET® filter cleaning system, with the separated material discharged into mobile collection containers located beneath the filter. Applications: - Extraction from production machines, machining centers, and ductwork systems with multiple suction points - Direct extraction for continuous operation - In sectors such as wood processing, joineries, carpentry workshops, furniture manufacturing, plastics manufacturing and processing, paper production, orthopedic industry, and many more Advantages: Nwedpfx Aowwtuiefhob - Wide selection of standard extraction systems with numerous customer-specific customization and options - Consistently high suction performance thanks to integrated pre-separator and AL-KO OPTI JET filter cleaning system - Heating cost savings, as 100% recirculation operation is possible in many cases - Small footprint due to compact design - Suitable for indoor and outdoor installation - Available in ATEX-compliant versions - Extensive range of accessories and numerous options for individual device configuration - Eligible for BAFA funding according to Module 4

Condition: used, Exhibition machineDescription:The new ZSX-TWIN Ec carpentry chainsaw is the practical solution for large-dimensioned wood components. MAFELL has created a new dimension with the development of the twin-engine chain saw, with which previously almost impossible and time-consuming work can be implemented effortlessly and accurately. With a rated power of 3000 watts, even one CUprex motor brings the 230 V mains to its power limit. Two CUprex motors at the same time would bring any simply fused lighting power supply to its knees. If the power is distributed over two circuits, the two-motor ZSX gets the power it needs. This is precisely the power grid that offers us, since here the phases are fused separately from each other and the grid is therefore not antage Benefit:Thanks to the use of light current technology, the ZSX TWIN weighs only 20 kg with 6,000 watts of rated power. This enables it to make longitudinal cuts up to a cutting depth of 400 mm! In wood construction and solid wood wall cutting, corner cuts are often necessary. Thanks to the vertical cutting tool, cutouts and overlaps can be made quickly and accurately. Time-consuming turning of the wood components is no longer necessary. At the heart of the ZSX-TWIN Ec are the two 3,000-watt luminous flux motors. They are operated in parallel on two 230 V phases from the power grid. The ZSX can be swiveled from -15° to 60° exactly according to lication:Longitudinal and cross-sectional cutouts Material use e.g.: Solid wood, glue laminated beamsTechnical data:Cutting depth 400 mm Cutting depth at 15° 386 mm Cutting depth at 30° 346 mm Cutting depth at 45° 282 mm Cutting depth at 60° 199 mm Swiveling on both sides -15° - 60° Cutting width 6.8 mm Rated idle speed 21000 1/min. Nominal input 2 x 3000 W Weight 20,0 kgScope of delivery:1 Chain saw ZSX TWIN Ec 1 Longitudinal cutting chain TWIN HM 400 No.: 006977 1 Fine cutting chain HM 400 No.: 006972 1 Transport carriage ZSX-Twin Ec No..: 205940 1 Glider for guide bar insert No.: 205934 1 Rip fence No.: 204591 1 Combination screwdriver 6 mm No.: 093272 1 Open-end wrench 13 mm No.: 093008 1 Connection cable 10 m complete with CEE plug 400 V No.: 087906 Nwjdpfx Ajvwfy Ssfhjb

Condition: new, - NEW -The model for more comfort. The edge sanding machineRS 2010 with its versatile equipment offers edge grindinga complete processing for the carpentry quick changeover from freehand sanding to veneer sanding,the band oscillation and the stepless swiveling of theGrinding aggregates allow universal support table, which is pneumatically adjustable in height, and thepneumatic belt tensioning ensure easy hnical Equipment:- Pneumatically height-adjustable work table- Infinitely swiveling sanding unit up to 45 °- easy conversion to veneer edge grinding- pneumatic belt tension- Display 0 - 45 ° for the sanding unit- stable support table on the pulley- feed bracket- Angle and miter fence- Veneer grinding device- Table on the deflection roller adjustable by spring pressure- stepless aggregate donation 90-135° via hand wheel- oscillationTechnical specifications:Motor power: 3 kWBelt speed: 22 m / sBand length: 2760 mmBand width: 200 mmTable size: 450 x 920 mmRequired space: 1200 x 2000 mmExtraction: 120 &amp, 80 mmTotal weight: approx. 320 kgStorage location: 97447 Gerolzhofen- free loaded- Nwodpovwf Hxsfx Afhsb

Condition: new, Description: Sharpening machine for chisels and hand tools The ISELI sharpening machine for hand tools type FL consists of the high-quality basic motor, the sharpening unit on the left mounting flange and the grinding wheel or buffing wheel on the right side of the motor equipped with an extension mandrel. Ideal areas of application: Sharpening / regrinding hand plane irons and chisels for manual woodworking in commercial carpentry shops, wood processing companies or in training centers Dry sharpening principle that has been tried and tested thousands of times: thread-free, burr-free grinding in 30 seconds Time-consuming sharpening of the cutting edge is no longer necessary. This saves time and efficiency Dry grinding and yet no burnt-out cutting edges Effortless clamping and unclamping of the tools Even trainees or unskilled workers can operate this machine - easily and masterfully Cutting angle adjustment according to scale Side grinding of the cutting edges in the same clamping Tool support with 3-way adjustable stop Built-in temperature switch in motor winding, for 230V 1Ph version Very powerful grinding motor (0.95 HP at 380 V. 3 Ph) Technical data: Operating voltage 400V, 3Ph, 50 Hz On-site fuse 16 A Power 0.55 kW Protection class IP 44 Speed 2800 1/min Scope of delivery: - 1 set of grinding inserts (1 piece 15/20/30/40/50/60 mm) - 1 pot & 1 tool grinding wheel Nwsdpsvwghdefx Afhob - 1 instruction manual

Year of construction: 2025, condition: new, functionality: fully functional, overall weight: 700 kg, total length: 2,860 mm, total width: 1,230 mm, construction height: 1,700 mm, Fully operational exhibition dryer, Ø 1090 mm We are offering our fully operational exhibition dryer with a diameter of 1090 mm. The unit is very compact and practical in terms of required space and easy relocation. Technical Details: Connection: only a water connection for spraying and a 16A power plug are required Heating system: 4 kW electric heater Wood moisture measurement at 3 measuring points Nwodpfxjxbz Hre Afhob Plug-and-play design – ready for immediate use Advantages: Ideal for small carpentry workshops Easy to transport and flexible positioning

Condition: good (used), Year of construction: 2003, The painting unit with heat exchanger and blowing for drying was used in the production of stairs and carpentry elements Nwjdpfx Ajuyy A Dofhob Paint wall also with extraction in the floor with a total length of about 7 mb equipped with three extraction fans

Condition: good (used), functionality: fully functional, cutting width (max.): 1,200 mm, cutting height (max.): 70 mm, saw blade diameter: 125 mm, total height: 1,300 mm, total length: 6,000 mm, cutting height with scoring (max.): 2 mm, extraction nozzle diameter: 250 mm, type of input current: three-phase, input voltage: 400 V, space requirement width: 3,000 mm, space requirement length: 6,500 mm, input frequency: 50 Hz, main saw diameter: 350 mm, overall weight: 3,500 kg, rotational speed (max.): 3,800 rpm, cutting length (max.): 4,200 mm, feed length X-axis: 4,500 mm, feed rate X-axis: 7 m/min, collet bore: 75 mm, saw blade speed: 3,800 rpm, saw drive: 7,500 W, year of last overhaul: 2024, Saw for rip cutting but also for sawing. It is very well suited for longitudinal edging of lumber flanks and then cutting to width before planing. With this machine, sawing lumber is incomparably lighter than on classic saws even with a carriage. It can work in automatic and semi-automatic cycle . It has 4 ranges of aggregate position as far as the length of the element is concerned, which means that the aggregate does not have to return all the way to the end of the machine, which shortens the time of cutting the raw material. It significantly facilitates and accelerates the manipulation of Nwedpfxeuyvnie Afhob with the preparation of lumber for planing, and the even cut makes the alignment saves time on planing the element. Working on it is relatively safe because during the cutting itself, the operator does not have direct contact with the material being cut, and the workpiece is pressed from above with a pressure beam using compressed air. Activation of the pressure beam and the feed of the cutting unit, is carried out using a foot pedal .It is also suitable for cutting boards with a jigsaw .Also equipped with components for various applications. It is ideal for small and medium-sized carpentry shops that process thick massive lumber. The machine is massive and durable.

Condition: new, Year of construction: 2025, Sharpening of woodworking tools Nodpfx Aeb Dt Ixofhswb The Profi Firmer ( piercing bag) and Planer knife grinding machine WOOD TOOL GRINDER WTG -1 - "Swiss quality" For an accurate and efficient work perfectly honed, razor-sharp cutting edge is a must. With our grinder to sharpen your tools " wood chisel (holly bag) , planer knives , chisels , chisel " , fast, easy , accurate and inexpensive ... Currently, the absolute cheapest PROFESSIONAL wooden tool grinder on the market! Made in Switzerland Swiss Quality = Where the WOOD TOOL GRINDER is " WTG -1" used? • Wherever conventional wood is processed. • For example, in carpentry , joinery , • Carpeting , schools, trade schools , • schools / training workshops ... Base machine price : EUR 2050.00 (ex works , excl 8.0 % VAT) You win and this several times ! If you regrind a wood chisel or a hand planer blades by hand or with an " older machine " experienced artisans need 5 min or more per tooth , if not even longer and get a good result ! With the WTG you need just about 30 seconds per tool . In no time you grind even a whole set of tools. And that, too, without having any special knowledge or grinding years of experience . So the machine can pay for itself relatively quickly. But above all, can be obtained every year , high , variable costs for tools and grinding work to a minimum . Once in possession of a WTG machine, you just have to work with perfectly cut tools , which has a positive impact among others on the quality and speed of operation. Go with the time ... go with BERGER technology GmbH. Your direct contact persons : Grinding Technology : Marc Broennimann Kaindl, DAREX, HARICH, Vertex, Drill Doctor, METEOR, Optima, Tatar, Promac, Cuoghi, Avyac, Christen, MOTOM, VITAX, WASU, Ulrich Klingel, ISELI, Schneeberger, Lamallo,

Condition: new, Year of construction: 2024, WTG piercing bag sander and planer knife grinding machine Description: For an accurate and efficient work perfectly honed, razor-sharp cutting edge is an absolute must . With our grinder to sharpen your tools quickly , easily, accurately and inexpensively grind wood chisel (holly bag) , planer knives , chisels , chisel Advantages Very precise , stable and durable design Fast, in just 30 seconds you grind a perfect gratlose Just cut Extremely to use, even for apprentices and unskilled dry grinding principle, ie no problems with moisture ( water / oil) Infinitely variable cutting angle setting, you buy fewer new tools , resulting in lower maintenance and fixed costs. Made in SWITZERLAND = Swiss Quality Where the WTG is used : Wherever conventional wood is processed. For example, in carpentry , joinery , carpentry , schools, trade schools , training centers / training workshops. Structure of the grinding machine : The WTS is driven by a powerful 500 watt motor . When trolley is a dust-proof , high-precision ball bearings and profile rail guide as it is a thousand times used in machine tools , industrial robots and precision special machines. The stepless grinding service is realized by a precise and self-locking dovetail guide. The tool clamping is safe and stable over a parallel clamping system. Our WTG grinder has a unique price -performance ratio. See for yourself , or let us advise you . Nwsdobxudkjpfx Afhjb Specifications: Weight: 19 kg , weight : approx 55 x 35 x 30 cm , Connection: 230 V / connector type J , Motor: 500 watts , speed : 3000 r / min. Sandable tool width : 5-60 mm Cutting angle adjustment : 25 - 30 degrees continuously Main grinding wheel : Special fused alumina ø 100 mm polishing wheel / buffing wheel : special-type ROTAX ø 150 mm Other polishing and grinding wheels on request. Price EUR 2'100 .00 Shipping costs The company BERGER technology GmbH is worldwide for decades one of the leading manufacturers of high quality drill and tool grinding machines, multi spindle drill heads as well . Contact: Mr. Marc Broennimann

Condition: new, Year of construction: 2025, Sharpening woodworking tools The PROFI chisel (lancing bag) and planing knife grinding machine! No cheap ASIA copy! The original! WOOD-TOOL-GRINDER WTG-1 - «Swiss Currently the absolute cheapest PROFI wood tool grinder on the market! For a precise and efficient work, a perfectly ground, razor-sharp cutting edge is a must. With our grinder sharpen your tools like: «Chisels, plow blades, chisels, chisels» fast, simple, accurate and inexpensive ... Made in Switzerland = Swiss Quality Where is the WOOD-TOOL-GRINDER «WTG-1» used? - Where conventionally wood is processed. - For example, in carpentry, carpentry, - carpentry, schools, trade schools, - Training centers / training workshops ... Your advantages - Very precise, stable and stable construction - Fast, in just 30 seconds you grind a perfect flashless edge - Extremely easy to use, also for apprentices and unskilled workers - Dry grinding principle, i. no problems with moisture (water / oil) - Stepless cutting angle adjustment - You buy fewer new tools, thus lower maintenance and fixed costs Construction of the wooden tool grinding machine «WTG-1» The WTG is powered by a powerful 500 watt motor. The carriage used is a dust-proof, high-precision, ball-bearing profiled rail guide, which is used a thousand times in machine tools, industrial robots and precision special purpose machines. Stepless grinding is achieved by means of an accurate and self-locking dovetail. The tool clamping is safe and stable via a parallel clamping system. Technical specifications Weight: 20 kg Connection: 230 volts Motor: 500 watts Njdpfx Afjdt Ap Ashowb Speed: 3000 rpm Grindable tool width: 5 - 60 mm Cutting angle adjustment: 25 - 30 ° degrees stepless Main grinding wheel: special corundum Ø 100 mm Polishing wheel / buffing wheel: special type ROTAX Ø 150 mm I would recommend you the basic machine and the grinding double set. So you are well prepared. Your direct contact person: Sir Marc Brönnimann Head of Sales & Assembly BST Kaindl, DAREX, HARICH, Vertex, Drill Doctor, METEOR, Optima, Tatar, Promac, Cuoghi, Avyac, Christen, MOTOM, VITAX, WASU, Ulrich Klingel, ISELI, Schneeberger, Lamallo,

Condition: new, Year of construction: 2024, The machine is designed for sharpening planer knives mounted in a package. The sharpener is characterized by a rigid and compact structure with a built-in cooling system Automatic grinder for sharpening planer knives ON1500PLC by VIBER-SYSTEM The machine is designed for sharpening planer knives. The device is characterized by a rigid and compact structure with a built-in cooling system. The machine is mainly used for grinding various right angles of cutting tool blades, such as carpenter's planers, rotary knives, paint spatulas, paper knives, shredder knives, etc. It mainly consists of a machine body, a work table, a slide carriage, a grinding head, automatic feeding, electrical components and cooling - a total of 7 parts. All components have a reasonable and compact structure, and the appearance of the machine is aesthetic. Fully automatic sharpening with X and Y axis feed. High Efficiency: The ON1000PLC sharpener is an efficient device that allows for quick and effective sharpening of planer knives, contributing to increased work efficiency in the plant. Large Dimensions: With a larger version of the model with an impressive weight of 520 kg, the machine ensures stability and solidity of operation, which translates into precision and quality of processing. High Speed: Thanks to the ability to generate grinding disc revolutions of up to 1440 rpm, the sharpener guarantees quick and effective sharpening of planer knives without compromising on quality. Nwsdpjtvm A Nsfx Afhjb Magnetic Mounting: Equipped with a stool with magnetic mounting, the machine ensures stability and safety during the sharpening process, eliminating the risk of knife displacement. Universal Application: The ON1000PLC sharpener is used both in small carpentry workshops and in large sawmills dealing with mass processing of wood and wooden materials. Model: ON1500PLC Max. working width: 1500 mm Table with magnetic mount: 140x1500 mm Grinding angle: +/- 90° Automatic workflow in the X axis Automatic and manual adjustment of the Z axis Grinding disc speed: 2800 rpm Grinding disc: Ø 150 x 68 x 32 mm Feed speed: 3 – 9 m/min, stepless adjustment using an inverter Motor power: 2.2 kW/400V Feed motor power: 120W Coolant pump power: 90W Cooling device protecting against overheating of knives: YES Adjustable halogen lamp: YES Lubrication pump with central lubrication: YES Dimensions: 2070x950x1450 mm Weight: 850 kg

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, BOOSTON - Manufacturer of machinery and equipment for the prefabrication of frame houses. We offer a production line consisting of two tables and a transport bridge. Nodeu I Rnmopfx Afhswb 1. first assembly table - ER-01H/900 with a length of 9m - Table drive - hydraulic cylinders, hydraulic pump - Total width - 360cm (including 300cm plate) - Permissible load - 100kg/1m2 - solid powder coated steel construction - holes for SD-01 pressure cylinders ( 3 pcs in the set) 2. receiving table ER-05H/600 (6m) - on wheels - to be transported with a hook (pulling or pushing with a forklift) - Mobile table that allows further processing of prefabricated elements in another place - Total width 230cm - Working height 70cm - 360-degree rotating wheels 3. transport bridge - MT-01 - load capacity up to 800kg - 360-degree rotating wheels

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, total length: 9,100 mm, total width: 3,600 mm, Our company is a manufacturer of machines and devices for prefabrication plants. We produce fixed assembly tables, rotary tables, butterfly tables and complete production lines We offer a new assembly table measuring 3.6m x 9.0m Nsdevv Rv Aepfx Afhewb - Powder coated construction - Table covered with plywood board with impact-resistant coating - holes for mounting SD-01 pressure actuators - removable and adjustable limiting pins - modular construction for self-assembly (one pallet) - low transport costs throughout Europe

Condition: new, Year of construction: 2025, operating hours: 1 h, table length: 9,000 mm, load capacity: 3,500 kg, Butterfly/rotary table with a length of 9m - a set consisting of two wings. Nwsdpfx Afep Ecn Uohsb BOOSTON - we are a manufacturer of machines and equipment for the prefabrication of wooden technology houses. Buy a machine directly from the manufacturer! Quality guarantee, short delivery time. We offer an assembly table - lifted (butterfly table) consisting of two wings with a length of 9.0m (models available from 6m to 12m). - Table drive - hydraulic cylinders, hydraulic pump - First wing with a total width of 360cm - Second wing with a width of 230cm (with the possibility of extension) - permissible load - 3500kg for one wing - solid powder-coated steel construction

Condition: new, Year of construction: 2025, functionality: fully functional, DIRECTLY FROM THE MANUFACTURER – no intermediaries SINGLE-WING ROTARY TABLE with pneumatic drive, 7.5 m long We proudly present our assembly table for prefabrication – a single-wing butterfly table – model ER-01P/750, 7.5 meters in length, specially designed for efficient and precise prefabrication of walls, ceilings, and roofs. CARPENTRY TABLE / JOINER’S TABLE / ASSEMBLY TABLE FOR PREFABRICATION * Pneumatic drive – working pressure 7–9 BAR * Permissible load: 50 kg/m² (e.g., for a 7.5 m table – 1125 kg) * Powder-coated steel construction * 15 mm plywood board * Holes for mounting clamping actuators every 150 mm * Removable locking pins with height adjustment * Modular construction with the possibility of adding additional segments * Option to add transport rollers Nwodpfxsl D Nkze Afhsb AVAILABLE IMMEDIATELY – we ship to every country in EUROPE