Used Center for sale (13,242)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: AL/008514, workpiece height (max.): 60 mm, table width: 1,000 mm, table length: 3,000 mm, empty load weight: 2,800 kg, TECHNICAL DETAILS Working area: 3,000 x 1,000 mm Max. workpiece height: 60 mm Upper Drilling and Milling Unit Electrospindle / vertical pantograph 24 independent vertical spindles 2 independent horizontal spindles with double output for drilling on the X-axis 2 independent horizontal spindles with double output for drilling on the Y-axis Fixed-position disc cutter group X – 2.2 kW Lower Drilling and Milling Unit Electrospindle / vertical pantograph 24 independent vertical spindles 2 independent horizontal spindles with double output for drilling on the X-axis 2 independent horizontal spindles with double output for drilling on the Y-axis Fixed-position disc cutter group X – 2.2 kW 2 panel gripper clamps Manual loading of parts onto the Flotex table Automatic part unloading Automatic lubrication Safety screens Pgodpfx Adexx Sg Dsisw EU regulations MACHINE DETAILS Control: PC and Xilog Plus software Weight: 2,800 kg Electrical Data Rated voltage: 400 V Phases: 3+N Rated current: 49 A Frequency: 50 Hz Short-circuit rating: 10 kA

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 970 mm, table load: 1,200 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 900 mm Travel Y-axis: 800 mm Psdpfxexyiiro Adiegw Travel Z-axis: 970 mm Spindle speed: 12,000 rpm Distance between spindle center and table top: 100 – 900 mm Distance between spindle head and pallet center: 70 – 1,040 mm Spindle taper: HSK 100 Table size: 630 x 630 mm Table load capacity: 1,200 kg Max. workpiece diameter: 1,000 mm Max. workpiece height: 1,300 mm Tool changer: 90 positions Minimum increment: 0.001 mm Creep feed: 1 – 4,000 mm/min (23 steps) Cutting feed: 1 – 50,000 mm/min Rapid traverse: 50,000 mm/min Pallet change time: 17 s MACHINE DETAILS Electrical data Operating voltage: 400 V, 3-phase, 50 Hz Total current: 98 A Incoming cable cross-section: 35 mm² Main fuse: 100 A Note: 2 trucks are required for transport.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 13,812 h, functionality: fully functional, machine/vehicle number: 108877, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 850 mm, table load: 800 kg, spindle speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel Range X-axis: 900 mm Y-axis: 780 mm Z-axis: 850 mm Distance from spindle center to pallet surface: 50 – 950 mm Distance from spindle nose to pallet center: 70 – 850 mm Pallet Pallet size: 500 × 500 mm Indexing angle: 1° Max. workpiece dimensions: 800 × 1,000 mm Max. workpiece weight: 800 kg Spindle Spindle speed: 50 – 20,000 rpm Spindle taper: HSK Rapid traverse & feed rate Pedpfexyiq Nsx Adiogw Rapid traverse (X/Y/Z): 60 m/min Feed rate (X/Y/Z): 1 – 60,000 mm/min Tool system (ATC) Tool holder: HSK Max. tool diameter (adjacent tool): 100 mm Max. tool diameter (no adjacent tool): 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg MACHINE DETAILS Dimensions & Weight Machine height: 3,280 mm Footprint (W × D): 3,080 × 5,585 mm Weight: 21,000 kg Operating Hours Spindle hours: 13,812 h Operating hours: 15,544 h Power-on hours: 33,469 h EQUIPMENT 2-pallet rotary table (APC) Splash guard Coolant supply system Chip air blow (nozzle system) Internal chip conveyor (floor-based system) Spindle head cooling system Worklight (fluorescent) Signal tower (3-stage) Foundation pads Clamping bolts

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: NL201FC1175, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, controller model: MSX-850 III CONTROL, The machine has only been used for plastics! TECHNICAL DETAILS Travel X-axis: 260 mm Travel Y-axis: 100 mm (+/- 50 mm) Travel Z-axis: 590 mm C-axis movement: 0.001 Pgedpfx Asxyidpodisw Max. main spindle speed: 6,000 rpm Maximum turning diameter: 356 mm Number of driven tools: 3 Tool turret: 16-position Bar capacity: 65 mm Axes: 4 MACHINE DETAILS Control: MSX-850 III CONTROL Dimensions & Weight Dimensions (L x W x H): 2,705 mm x 2,000 mm x 2,120 mm Weight: 5,800 kg EQUIPMENT Parts catcher chuck Driven tools Tailstock Parts catcher Tool setting probe Dust extraction system

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 860 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 0i-MF Plus, spindle speed (max.): 15,000 rpm, Machining center with RoboJob Mill Assist automation, year of manufacture 2025! TECHNICAL DETAILS Travel Range X-axis travel: 860 mm Y-axis travel: 550 mm Z-axis travel: 550 mm Table Table size: 950 x 550 mm Maximum load: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Spindle nose to table surface: 150 - 700 mm Linear Guides & Speeds Linear guides: Ball guideways X/Y, roller guideway Z Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 - 10,000 mm/min Minimum increment: 0.001 mm Tool Magazine Magazine positions: 30 System: random-access Maximum tool diameter: 75 mm Maximum tool diameter with adjacent slots free: 150 mm (for 40 tools: 130 mm) Maximum tool length: 300 mm Maximum tool weight: 7 kg Spindle Spindle taper: SK-40 Drive power (30min/continuous): 18.5/11 kW Speed: 15,000 rpm MACHINE DETAILS Controller: Fanuc 0i-MF Plus Dimensions & Weight Machine dimensions (W x D x H): 2,260 x 2,900 x 2,775 mm Required floor space (W x D x H): 3,160 x 3,000 x 3,000 mm Machine weight: approx. 5,400 kg Coolant, Chip, and Compressed Air Management Coolant system: 300-liter tank and pumps Chip evacuation: chip spirals right and left in the machine bed Compressed air connection: at the spindle (M32/M33) Compressed air through the spindle: (M38/M39) Compressed air and coolant gun Electrical and Pneumatic Requirements Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar EQUIPMENT Podpfx Adsxz A Udsijgw Prepared for fourth axis (FANUC control), incl. wiring and Harting connector (without axis driver) Bed flushing system Integrated coolant pump with 20 bar pressure Belt-type chip conveyor incl. chip trolley RENISHAW OMP-60 probe with infrared transmission RENISHAW NC4+ tool laser measurement system and tool breakage monitoring Auto-door (side door) Pneumatic interface for workpiece clamping RoboJob Mill Assist 25kg, year of manufacture 2025 Full enclosure with double gripper

Condition: ready for operation (used), Year of construction: 2010, operating hours: 14,400 h, functionality: fully functional, machine/vehicle number: A1003212.01, travel distance X-axis: 1,050 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 520 mm, controller model: Siemens 810D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel X: 1,050 mm Travel Y: 710 mm Travel Z: 520 mm Tool holder: SK 40 Spindle speed: max. 8,000 rpm Spindle power: 12 kW Tool magazine: 30 stations MACHINE DETAILS Control: Siemens 810D Weight: approx. 5,600 kg Operating hours Spindle hours: 14,400 h Power-on time: 60,521 h Psdpfxoxywa Ej Adiegw EQUIPMENT Fully enclosed working area Work area lighting Central oil mist extraction Hinged belt chip conveyor Internal coolant supply 20 bar Note: The last day for pick-up in 2025 is December 22, 2025. The earliest pick-up date in 2026 is January 12, 2026!

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0-250-12-2554, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, TECHNICAL DETAILS Minimum part dimensions (X, Y, Z): 250 mm x 100 mm x 8 mm Maximum workpiece dimensions (X, Y, Z): 3,000 mm x 1,000 mm x 80 mm Upper vertical working head Number of vertical electrospindles: 1 Vertical electrospindle power: 6 kW Grooving saw (90° to the X-Y axis), diameter: 125 mm Number of vertical drill spindles: 32 Vertical drill spindle power: 2.7 kW Number of horizontal drill spindles: 10 (8 in X + 2 in Y) Lower vertical working head Number of vertical electrospindles: 1 Vertical electrospindle power: 6 kW Grooving saw (90° to the X-Y axis), diameter: 125 mm Number of vertical drill spindles: 32 Vertical drill spindle power: 2.7 kW Number of horizontal drill spindles: 10 (8 in X + 2 in Y) MACHINE DETAILS CNC control: PC 85 Software: woodWOP 6 Electrical data Voltage: 380 V Frequency: 60 Hz Phases: 3 Power: 62 kW Current: 125 A Control voltage: 24 V Pgsdpsxx R Slefx Adijw EQUIPMENT Simultaneous processing of two panels Safety enclosure for the working head No. 2 clamps for fixing and moving the workpiece Loading station with air cushion Discharge of panel(s) via motorized roller conveyor Safety system with perimeter fencing and front safety mats

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 220 mm, spindle bore: 50 mm, turning diameter: 400 mm, turning diameter over bed slide: 400 mm, turning diameter over top slide: 220 mm, center height: 200 mm, turning length: 1,000 mm, TOS SN 40B Gap Bed Lathe Model: SN 40B Swing over Bed: 400mm Swing over Saddle: 220mm Swing in Gap: 600mm Distance Between Centres: 1000mm Spindle Speeds: 22 – 2000 RPM Spindle Bore: 50.8mm Motor: 5.5 KW Machine with: 3 jaw chuck 4 jaw chuck Pgsdsxxyy Sjpfx Adisw Quick Change Toolpost Fixed Steady

Condition: excellent (used), Year of construction: 2005, FOR SALE - Emcomat 17D Lathe Year 2005 Travel in X/Z 220 / 710 mm Distance between centers - 700 mm Distance above centers - 170 mm Max. speed - 3000 rpm Spindle nose - DIN 55029 Max. drive power - 5.3 kW Quill diameter 50 mm Inner cone MT3 Quill travel 120 mm Dimensions (LxWxH) 1650 x 1060 x 1635 mm Pgjdpfx Aoxyzikjdiow Machine weight 755 kg 3 & 4 Jaw Chuck

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: ML0107-000373, Doosan PUMA 2600 L Swing 780mm X-Axis 260 mm Pgodpfx Aoxw Ilmedijw Z-Axis 1350 mm FANUC i Series Swarf conveyour Renishaw Toolsetter

Condition: used, Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, Approx. 3000mm Between Centres, 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Includes Various Tool Holders and Sleeves in Tool Turret and Boxes Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Podpfxexzq Ufj Adiegw

Condition: good (used), Year of construction: 2011, Traverses XYZ: 700 x 530 x 560mm, table size 900 x 500mm, Heidenhain TNC620 Control, BT40 spindle taper, 24 station tool changer, Spindle speed 9,000rpm, Spindle motor power 18.5kW, Pgsdpfx Ajxv S Ngediew Through Spindle Coolant, Low volt light, 4th Axis Rotary Table

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 94464, travel distance X-axis: 3,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 155 mm, TECHNICAL DETAILS Pedpfx Ajxx Rz Tedisgw Travel range X-axis: 3,400 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 155 mm Number of work zones: 2 Drilling Head Vertical spindles X-axis: 10 Vertical spindles Y-axis: 12 Horizontal spindles X-axis: 6 Horizontal spindles Y-axis: 2 MACHINE DETAILS Electrical Data Power: 20 kW Voltage: 380 V Current: 25 A Frequency: 50 Hz EQUIPMENT Vertical electrospindle with C-axis vector, automatic tool changer, ISO 30 taper Automatic tool change system with 3 side-mounted positions for aggregates Automatic tool change system with 20 positions and chain 8 manually adjustable bars for suction cup holders with display 3 manually adjustable suction cups per bar 8 pneumatically actuated Bakelite bars for panel lifting Perimeter safety fence Motorized conveyor belt for chip extraction Vacuum pump

Condition: good (used), functionality: fully functional, Machine Name - Colchester Machine Model - Triumph 2000 Pgedpfx Ajuk H Rbedijw Description - 3 Jaw Chuck Between centers : 50 inch / 1270mm Spindle speed 2000 RPM Swing over bed 15inch /380mm Spindle bore: 2 125 inch / 54 mm Diameter Quick change tool post 2 axis Accurite DRO Gap bed Tailstock Coolant pump and tray

Condition: used, Year of construction: 2007, Mori Seiki NT5400/1800 SZ DCG CNC Twin Spindle Turn & Mill Machine with DMG Mori MSX-701 III CNC Control, Max Work Piece Swing 920mm, Max Turning Length 1921mm, Bar Work Capacity 107mm, Travels x 1 Mill Head 1040mm, Y Axis +/- 255mm, Z I Axis 1940mm, B Axis +/- 120 deg, X 2 267mm, Z 2 1830mm, Spindle Speed 2400rpm, Capto C8 Spindle Taper, Spindle Bore 120mm, Tool Head Spindle Speed 8000rpm, Tailstock Travel 1830mm, 10 Position Tool Turret, (2) x 450mm Powered 3 Jaw Chucks, High Pressure Coolant Filtration System, Clean Mist Oil Mist Extractor, Machine Weight 36000kg. S/No. NT540GE0032 (2007) Pgodjxzq R Hjpfx Adiew Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2016, Table size 1200 x 600mm, table load 500 kgs, Podpfx Adoq Tb Uweiegw Traverses X Y Z; 1020 x 610 x 510mm, spindle to table min-max 130 – 640mm, spindle speed 10,000rpm, spindle taper BT40 Big Plus, 24 station ATC, Fanuc oi-MB control, , coolant.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 35079, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,140 mm, travel distance Z-axis: 160 mm, empty load weight: 600 kg, TECHNICAL DETAILS Travel range X-axis: 3,060 mm Travel range Y-axis: 1,140 mm Travel range Z-axis: 160 mm Number of working fields: 2 Drilling head spindles vertical X-axis: 7 Drilling head spindles vertical Y-axis: 6 Drilling head spindles horizontal X-axis: 4 Drilling head spindles horizontal Y-axis: 2 Vacuum pump capacity: 250 m³/h MACHINE DETAILS Weight: 600 kg Pgjdpfx Adexx Rr Esisw Number of electrospindles: 1 Electrospindle power: 12 kW Tool changer positions: 10 Taper type: ISO 30 Electrical data Supply voltage: 380 V AC Rated current: 44 A Number of phases: 3 Power: 26.1 kW EQUIPMENT Bar worktable 6 adjustable bars for suction cup support 2 adjustable vacuum suction cups per bar with sealing Independent saw blade group for grooves in X-axis Front photocell guard and safety system Automatic lubrication system Conditioning system for cooling and cleaning the machine control

Condition: like new (used), Year of construction: 2018, operating hours: 10,974 h, Machine Name - Dugard XP Machine Model - XP 1000 S.N PV10180957 Y.O.M 2018 Descriptions - Fanuc Control 0iMF X axis travel =1050 mm Y axis travel = 540 mm Z axis travel =560mm XYZ Rapid traverse =44/44/25m/min Table size = 1200mm x 480mm Pgedpfx Asuxd D Ajdisw 12,000 Rpm spindle Max load capacity on the table 1176kg 40 Spindle taper 36 station ATC Coolant tank TSC Swarf conveyor

Condition: good (used), Year of construction: 2010, Heidenhain 530 Control, Traverses X Y Z: 1050 X 510 X 510mm, Table 1300 X 550mm, Distance From Spindle Nose To Table 150 ~ 660mm, Maximum Workpiece Weight 1200kg, Pjdsucdvqopfx Adisgw Spindle Speed 0 – 12000rpm, Spindle Taper DIN40, Spindle Motor 11kW, 30 Station ATC, Swarf Conveyor, Coolant, Low Volt Light ,

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0-201-09-5124, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,650 mm, working height: 60 mm, TECHNICAL DETAILS X-axis travel: 6,000 mm Y-axis travel: 1,650 mm Y-axis travel (for milling): 1,750 mm Maximum working height for trimming: 60 mm Maximum applicable edge height: 65 mm Minimum inner radius: 30 mm Tool change positions: 18 Aggregate saw blade diameter: 200 mm (max.) Pgjdpfxjxx Nnxe Adiew MACHINE DETAILS Vertical electrospindle (C-vector axis, automatic tool change, cone type HSK F63): 11 kW Drilling head output: 4 kW Vertical drilling spindles in X-axis: 11 Vertical drilling spindles in Y-axis: 6 Horizontal drilling spindles in X: 6 Electrical Data Voltage: 400 V Current: 39 A Frequency: 50 Hz Current: 50 A Control voltage: 24 V EQUIPMENT Numerical control with WoodWop software Adjustable panel support rails for suction cup positioning Pneumatic rods for loading/unloading assistance Adjustable Schmalz-type vacuum suction cups Laser positioning system for suction cups Independent edge-banding unit with 360° rotation Glue pot and premelter for granular EVA adhesive Applicable edge materials in rolls: PVC / ABS 0.4 – 3 mm Rubberized pressure roller + panel preheating lamp Edge trimmer Combined trimming/edge unit Edge holder magazine Chip extraction system with motorized conveyor belt Air conditioning unit for cooling and cleaning of machine control Automatic lubrication system Vacuum pump

Condition: good (used), Year of construction: 2007, Maximum cutting diameter 820mm, maximum cutting length 1500mm, C axis 0.0001 degrees, B axis -30/+210 degrees, 40 ATC, spindle speed 1,600 rpm, Milling speed 10,000rpm., main spindle 37Kw, spindle taper din50, Pgedpju Rb Snofx Adisw Y axis -/+ 250mm, Mazatrol Matrix control, swarf conveyor

Condition: excellent (used), Year of construction: 2018, operating hours: 6,019 h, XYZ: 350 x 440 x 330mm, 320mm diameter table, Maximum workpiece diameter 320mm, maximum workpiece height 265mm, Pgjdswfgnlepfx Adisw Maximum table load 100Kgs, A axis -/+ 115 degrees, spindle speed 18,000rpm, 36 station tool changer, Heidenhain TNC 640, swarf conveyor, high pressure coolant

Condition: good (used), Year of construction: 2014, Traverses X Y Z: 850 x 550 x 510mm, table size 500 xx 400mm, workpiece weight 500kgs, A axis -120/+90 degrees, C axis 360 degrees, Spindle speed 10,000 rpm, Podpjxftdwofx Adisgw Spindle taper BT40, 30 Station ATC, Matrix 2 Control, through spindle coolant, swarf conveyor

Condition: good (used), Year of construction: 2006, Table size 2000 x 510 mm, Traverses XYZ 1660 x 510 x 510 mm, Table load 1200 kgs, Spindle taper Din 40, Spindle speed 12000 rpm, 30 ATC, Pgedpfx Adewaidljisw Mazatrol 640M control, through spindle coolant, swarf conveyor, 4th axis rotary table.

Condition: excellent (used), Year of construction: 2018, Traverses XYZ 1150 x 700 x 550mm, table size 1460 x 750mm, table load 1,500kgs, spindle speed 12,000 rpm, Pgodpfxow Nq Hxs Adiew 20 station ATC, Siemens 840D control, swarf conveyor, and coolant.