Used Chocolate Production Line for sale (28,081)

Condition: ready for operation (used), Year of construction: 2000, Line for the production of round tubes and closed profiles from black and stainless steel, with diameters ranging from 20.0 mm to 70.0 mm and wall thicknesses from 0.5 mm to 3.5 mm. Different diameter ranges are possible by manufacturing a suitable set of rollers. The tube or closed profile is formed by rolling the appropriately sized and thick steel strip using a roller set, then joined together by TIG welding. During production, the following processing steps are performed: a) grinding the weld seam b) calibration c) straightening d) and cutting to length The finished product, the 'raw tube', can be further processed to achieve the desired surface structure. Two main finishing processes are used: a) wet grinding using abrasive belts b) and/or dry polishing using polishing wheels and compounds. CONSTRUCTION The tube/profiling line features automatic TIG welding by SAF: a) Tricathode NERTAMATIC 300 TR TIG inverter, 2 units b) Tricathode NETRINOX TH 500 TIG inverter, 1 unit Isdsxmiirspfx Ag Nsih c) Welding of 0.5 – 1.5 mm wall thickness products using E16 torch d) Welding of 1.5 – 3.5 mm wall thickness products using E25 torch e) RETRISAF cooling system 1.1 Steel strip coil support and decoiler 1.2 Roll forming stations a) entry station b) preliminary forming station c) main forming station 1.3 Welding segment – triple-electrode TIG welding heads with inert gas (argon) shielding 1.4 Weld seam cleaning station 1.5 Calibration station 1.6 Straightening station 1.7 Flying saw – product cutting to specified length Additional line components: 1.8 Bossi 4-head tube grinder Type: CPS 400x3000/4 Belt: 3000x150 mm 1.9 Bossi 2-head tube polisher Type: CP 400-2U

Year of construction: 2020, operating hours: 1,800 h, condition: good (used), functionality: fully functional, machine/vehicle number: 50850283/P.0000893.03.05, The assembly line is a production system consisting of three separate units, interconnected by conveyor belts. In the first section, consumable materials are fed in via rollers, folded, the nose clip is integrated, welded, and then cut to the correct length. The finished mask blanks are transported via an indexing conveyor and additional transport belts to the next units, which are arranged in parallel. Each of these stations feeds and welds the ear loops to the mask body. The line is suitable for the manufacture of surgical and general medical face masks, made from single- or three-layer PP (polypropylene) nonwoven fabric. System configuration Each production cell is based on an aluminum profile frame with swing doors made from Makrolon. For the required process stability, the stations are mounted on a solid aluminum table plate. The control cabinets are integrated into the frame. The equipment includes, among others, 3 ultrasonic welding units, Siemens PLC control, and various pneumatic systems from Festo. Performance requirements Iisdpfxow Dn Uwe Ag Neh Output (gross): ≥ 80 units/minute Technical availability: ≥ 90% (VDI 3423) Required floor space for the complete system: approx. 6,000 x 5,000 mm Connection values Electrical connection: Operating voltage: 3P/N/PE 400 V AC 50Hz Mains fluctuation: ± 5% Short-circuit design: < 10kA Network type: TN-S Pneumatic connection: Compressed air: 6 bar ± 1 bar Ambient conditions Temperature range: 10°–35°C Max. humidity: 75% (non-condensing) Emissions Sound pressure level during operation: ≤ 78 dB(A) according to EN ISO 11204:2010 The machine is currently out of use and was regularly serviced during its operational period. At present, the machine is dismantled, with individual components stored under dust protection. Upon request, we can also sell our remaining raw material stocks for production.

Condition: used, Auction item. Iisdpfx Agjxmhr Sj Njh Log house wall production line is in working condition. Sold as seen in photos and video.

Year of construction: 2017, condition: like new (used), Production line for manufacturing NESPRESSO coffee capsules Comprising the following components: Item 01) Injection molds for capsules, manufacturer: FOSTAG AG 1 pc. mold with 16 cavities 1 pc. mold with 32 cavities Item 02) Two-component injection molding machine, manufacturer: ARBURG, model: 720A3200-800, year: 2017 Item 03) Extraction system for 16-cavity capsule, manufacturer: Beck, year: 2019 Item 03) Extraction system IML system for 32-cavity capsule, manufacturer: Beck, year: 2019 Ijdjw Nriuspfx Ag Njih

Condition: excellent (used), functionality: fully functional, total length: 7,000 mm, total width: 1,500 mm, total height: 1,950 mm, Vemag DP10E, LPG 208, AHM sausage production line Vacuum stuffer Brand Vemag Model DP 10E Iodpfx Asv Ezgdog Njih Year of production 2011 Power 12kW Voltage 3~50/60Hz 400-460V 18A Dimensions 2200x1500x1950mm Portioner Brand Vemag Model LPG 208 Year of production 2009 Power 6kW Voltage 3~50/60Hz 400-460V 9A The LPG208 portioning machine combines sausages with the highest precision in terms of length and weight. It allows you to produce cooked and raw sausages in natural, collagen and cellulose in the range of caliber from 13 to 40+ mm. Hanger Brand Vemag Model AHM Type 204 Year of production 2004 Dimensions of the container with hanger 4800x900x1300mm Dimensions of the entire combination 7000x1500x1950mm

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, total length: 2,000 mm, total width: 1,250 mm, total height: 2,000 mm, type of input current: three-phase, input voltage: 400 V, power: 40 kW (54.38 HP), saw blade diameter: 450 mm, workpiece width (max.): 300 mm, workpiece height (max.): 30 mm, air pressure: 6 bar, extraction connection diameter: 200 mm, hone diameter: 125 mm, number of spindles: 2, MARINUS PROMAX - Endmatcher and defect saw. The machine is according to following specifications: - Stable and heavy construction, dimensions LxDxH = 2080x1260x2000 mm. - Continuous feeding system with accurate positioning (servo). - Pneumatic sidepushers for guaranteed square angle. - PLC-steering. - Operating by terminal. Iiedpfx Agjq Auhde Njh - Modem for programming at distance. - 2 servomotors for maximum dynamics. - 2 sawingmotors (3,0 kW). - 2 high-speed millingmotors with inverter (7,5 kW each /200 Hz/n=12.000). - 1 motorgearbox with inverter. - 2 drummotors. - 26 pneumatic cylinders with valves. - 1 luminescence-sensor - 6 inductive-sensors - Bandconveyor for waste, height 1,3 mtr. - Machine completely closed by safety-doors. - Machine according to CE-requirements. Length-measuring system: A lenght-measuring-system displays the total lenght and square meters of the boards on the display during production. Tooling: We can offer tooling (tongue and groove) with disposable knives and 2 crosscutsawblades as an option for the machine. Standard Programming: The machine is equipped with 2 main programs: 1 Endmatching 2 Cutting Both main programs have 2 sub programs: 1. Variable lenghts: defects are cut out, endproducts are of all variable lenghts. 2. Fix lenghts: boards will be produced at a fixlenght, infeedlenght has an oversize of max +200 mm. Cutting out defects is not possible. - Min. Width 60 mm - Max. Width 300 mm - Min. Length 500 mm - Max. Length 6000 mm - Min. Thickness 10 mm - Max. Thickness 30 mm

Condition: used, Machinery installation for window and door production Weinig, Biesse Iodjwa Dk Tjpfx Ag Neih Technical Data: Currently, this line is used for the manufacturing of timber windows, timber-aluminium windows, block frame elements, box-type windows, entrance doors, and lift-and-slide doors. The machinery installation comprises: Support table with 3 sections, Weinig Type UC Matic: - Automatic infeed: to moulder Moulder Weinig Type Unikat 23EL: - Year of manufacture: 2007 - 2 bottom spindles - 2 top spindles - 1 right spindle - 1 left spindle - Glazing bead separation - Glazing bead profiling Sanding machine Hess Type Roto Finish Crosscut saw Weinig Type Unirex: - Crosscut saw - Drilling unit - Lock case milling unit Tenoning line Weinig Type United 15 - Slotting spindles: 3 - Max. slotting depth (mm): 120 - Counter-profiling: possible Rebating and profiling machine Weinig Type Univar 12 - Equipped with: 7 spindles Linkage to Biesse line Machining centre Biesse Type WinLine One - Year of manufacture: 2015 - Equipped with: 2 gantries - Workpiece length (mm): up to 6000 - Automatic operation max. length (mm): 4500 - Paternoster buffer - Gantry 1: equipped with saw, travelling tool changer - Gantry 2: equipped with lock case milling unit (FlexiWood), segment table for curve work Biesse Flexstoor 1 Biesse Flexstoor 2 Sale of the complete line including tools

Condition: used, Year of construction: 2021, ST GROUP – Year 2021 Insulating Glass Line H 2500 mm Automatic Washing Machine with 6 Brushes Ijdpfx Agoxlirdj Noih Low-E Automatic Gas Press with Moving Plates Tilting Table for Unloading Overall Length 24 m

Condition: ready for operation (used), A complete DIMA mozzarella production line is available. Within this plant, the mozzarella is cooked, salted, cut, sealed in plastic packaging and finally packed in boxes and stacked on pallets. Iijdetnilhopfx Ag Njh

Condition: excellent (used), Year of construction: 2024, S/S. COMPLETE TETRA PACK ICE CREAM PLANT. 1 x Complete Tetra Pak ice cream plant. All s/s. Latest technology. Includes gantry. Lift out: TBC This world-class 1500 litres per hour ice cream plant was housed in a state-of-the-art facility combining advanced technology, efficiency, and quality control to produce top-tier ice cream in an environmentally responsible way while remaining adaptable to new consumer demands and trends. Large, refrigerated milk silos dedicated to keeping ingredients fresh, smaller IBC storage for non-dairy. The ingredients would be carefully measured and dispensed into the production line to ensure consistency. After ingredients are measured, they would be transferred to a large high shear pasteurization machine to eliminate bacteria and improve shelf life while retaining the quality of the ingredients. This process happened in a controlled environment, with precise temperature and timing regulation. The ice cream mixture would then undergo homogenization, where it is passed through high-pressure systems to break down fat molecules and create a smooth, creamy texture. This is a crucial step to ensure that the ice cream has the perfect consistency and mouthfeel. Once the base mix is ready, flavours could be added. This could include natural fruit purees, chocolate, vanilla, or even exotic ingredients. There would be a separate line for adding inclusions like nuts, chocolate chips, caramel ribbons, or swirls. The flavoured mix would then be sent to freezing machines. These machines rapidly freeze the ice cream mix while continuously churning it to prevent the formation of large ice crystals. This process ensures the smooth and creamy texture that is characteristic of premium ice cream. Once the ice cream reaches the perfect texture, it would be dispensed into moulds, then quickly hardened in a blast freezer to maintain its integrity during storage. The plant has sophisticated software systems for inventory management, quality control, and tracking production. Sensors and automated systems would monitor temperature, consistency, and flavour levels at every step. A fully computer controlled CIP plant ensured consistent and continuous levels of hygiene throughout the plant. This world-class ice cream plant had a focus on sustainability. Iedevzny Nepfx Ag Noih

Condition: used, functionality: fully functional, machine/vehicle number: D24E/8364, Offer Number: D24E/8364 Machinetype: production line for ZICK ZACK springs Make: WAFIOS Type: SLF4/SLF4S Ijdpfx Agswi Ub Io Njih Constr. year: wire diameter: 2,4-4 mm spring diameter: 42-55 mm output - pieces/min: ca. 32 m Location: Europe

Condition: used, The company sells pellet production line and Spe Renergi low-temperature wood chip dryer/kiln PELLET PRODUCTION LINE CAPACITY 6 t/h | CPM, Fisker, Mogensen A fully assembled and working pellet production line with a capacity of up to 6 tons per hour is for sale. Ideal for professional production of pellets from wood biomass, agrobiomass or other raw materials. The line includes: • CPM Championdry hammermill. • 2x CPM Pressess • Fisker (Essegi F1200) branded new fullautomation packaging line • Mogensen vibro sieves • Vecoplan / CPM wet wood chip milling station • Transporters / feeders Additional searparts are available – matricas, rolls, etc. Main advantages: Isdswp Rqfopfx Ag Njih • Large production capacity – up to 6 t/h. • High quality components from European manufacturers. • Line in working order – can be demonstrated in operation. • Available immediately. The equipment is located in Sweden and, upon prior agreement, it is possible to view and test it in person. Price: 400,000.00 EUR (VAT is not included) SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 30,000.00 EUR (VAT is not included)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Kaban machine line 2-head cutting saw 2-head welder Corner cleaner Lock slot copy router Water slot router Double glazing bead saw Still electric forklift New compressor Ijdpfx Aoxgz Tveg Noih

Condition: like new (used), Year of construction: 2015, left to right, size 2500x4000 insulating glass line with washer (6 brushes), argon gas press, sealing robot for triple glazing and shaped panes. Thickness 3-80 mm. Isdoxf E Dijpfx Ag Neih

Year of construction: 1990, condition: ready for operation (used), A complete and automated OMAG paving block production line is available. Components: 1) Drawing plate for Colormix in the hopper. 2) InLine washing system. 3) Drying side Rekers. 4) Handling Rekers. 5) Rekers control system. 6) Rekers fork carriage. 7) Part of the drying chamber racks, as they are load carriers for the building. 8) Board crane as buffer placer and empty boards. 9) Cyklop horizontal strapping. Without strapping and boards. Concrete feed: 2-axis bucket, output with 90x90 paving blocks: 1000-1100/shift, board size: 1000mm/1400mm, max. format size: 1000mm/1400mm. Completely new OMAG control system in 2017. Conversion to proportional valves in 2014. Documentation available. On-site inspection is possible. Iiodpov Nn Hxsfx Ag Njh

Condition: ready for operation (used), Year of construction: 1994, operating hours: 20,000 h, functionality: fully functional, year of last overhaul: 2022, Web width: 32"  Cylinder: 28 1/3" 9 pcs. 23 1/3" 8 pcs  Printing tower: 8 pcs.   Numbering tower: 1 pcs. Color control: Eltromat Polugraph Offcon 3 Camera: BST UV drying: 8 pcs of IST  Turnbars: 2 pcs. One between tower 2-3 and one between tower 4-5 Iijdpfxougizae Ag Neh Plow folder: Inline with 3 heads Blanket washing: Elettra Unwinder and rewinder A lot of spare parts

Condition: used, functionality: fully functional, machine/vehicle number: D24E/8366, Offer Number: D24E/8366 Machinetype: production line for ZICK ZACK springs Make: SQUARE Ijdewi T U Hepfx Ag Njih Type: QH2+QD2B Constr. year: wire diameter: 2,5-4,5 mm spring diameter: 20-50 mm output - pieces/min: max. 200 Location: Europe

Year of construction: 2008, condition: ready for operation (used), This DELTA pallet nailing machine line was manufactured in 2008. It features a comprehensive setup including a base nailer, a nailing machine with pneumatic feeder and nail control, units for marking, turning by 90 and 180 degrees, a corner saw, and a stacking unit, complemented by a conveyor belt. Consider the opportunity to buy this DELTA pallet nailing machine line. Contact us for more information. Iiodpfxsxbupaj Ag Nsh Application Types Complete Production

Condition: good (used), Year of construction: 2009, Double welding and cleaning line URBAN consisting of 2 four-head welding machines AKS 6910/4 - 30 /40, one with right-hand stop, one with left-hand stop, WINDOWS control, each with a URBAN TBA transport/cooling belt, transverse table with motor for removal of individual elements, URBAN SV 815 cleaning automatic with two heads, with infeed table and rotatable outfeed table, additional station for processing of corner and scissor bearing drillings as well as milling of elements with varying widths, buffer rack with tiltable shuttle table and two additional outfeed tables. Iiedpfx Asw Niqpsg Neh

Year of construction: 2012, condition: good (used), functionality: fully functional, Pipe production line with accessories. Output: 350 kg/h PE. Extruder Ø90. Head Ø110–225. Calibrators. Vacuum tank L-6m, tank L-6m, 2 cooling tanks, haul-off, knife, take-off device. Iodpfx Agjxdizvs Nsih

Year of construction: 1996, condition: ready for operation (used), A Forel multi-pane insulating glass production plant with fixed spacer and Swiggel is available. Glass production options: 2-pane/3-pane, layering: coated/uncoated, insulating glass pane dimensions X/Y min./max.: 400mm x 200mm/2500mm x 2000mm, pane thickness range: 12mm-50mm, total system length: 30200mm. System components: 1) Inlet to the washing machine, 2) Washing machine, 3) Outlet from the washing machine, 4) Place spacer on inlet, 5) Place spacer on outlet, 6) Place spacer on outlet, 7) Inlet assembly station, 8) Assembly station, 9) Outlet assembly station, 10) Inlet roller press (no gas filling press), 11) Outlet roller press, 12) Roller tilting table for removal. Documentation available. On-site inspection is possible. Iiodpfx Ajugv R Isg Njh

Year of construction: 2015, condition: used, W and C Profile Production Line for Sale Designed for the production of road barriers, posts, and fastening elements. Fully equipped line suitable for continuous industrial manufacturing. The line consists of: - Two decoilers - Post production line - Parapet (guardrail) production line - Two presses for fastener manufacturing Technical specifications: Length: 17 m Width: 1 m Height: 1 m Motor power: 22 kW Weight: 18 t Year of manufacture: 2015 Manufacturer: Chengxing Machinery (China) Iisdpfxexhf R Ij Ag Neh Purpose and advantages: This W and C profile production line is designed for manufacturing various road safety components: detachable road barriers, support posts, and fastening parts. The equipment ensures a reliable, stable, and consistent production process. The machine is available for inspection. If you have any further questions, please do not hesitate to contact us.

Condition: used, Year of construction: 1997, functionality: fully functional, Production line for packing, blending, filtering and homogenizing of dry products from D.H.T. van den Dikkenberg (NL) The production line is suitable for both food and feed blends and has a capacity of 3mt per hour. All dairy powder and powders of plant origin can be blended, such as milk powder (SMP/WMP), whey powder, buttermilk powder, powder of milk permeate, lactose, dextrose, whey protein/fat concentrates, FFMP, soy protein, pea flour and etc. The number of blended ingredients is unlimited. The line for the production & packing of dry blends: - meets the requirements for materials in contact with food products; - is made of durable materials that don't change the smell and taste of food products, don't absorb moisture and food particles, are corrosion-resistant materials, and are safe to use; - all surfaces are resistant to repeated exposure to cleaning and disinfecting agents; - is designed and manufactured in such a way that there are no cavities inside in which the processed products accumulate, and this would not create conditions for contamination of the manufactured products; - is mounted in two 40'foot sea containers, which ensures easy transportation of equipment. The production line has the following units: 1) two-stage filtering of the poured raw materials through coarse and fine sifting sieves First, the raw materials are sifted through a sieve with eyes of 5 mm in diameter. At this stage, foreign impurities and hardened particles over 5 mm are separated. In the next sifting unit, the raw materials are sifted through a sieve with eyes of 0.2 mm. In this way, all foreign particles over 0.2 mm are completely separated from the raw materials. Iiodewhf Ddjpfx Ag Nsh 2) mixing of components into a homogeneous blends The mixing process in a horizontally located mixer is very gentle. The blended ingredients remain undamaged and retain their structure, which is very important for the products of instant category. 3) dosing of finished products into bags The line is equipped with a dispenser, which is technologically connected to automatic scales. It allows to select and set the desired volume of the packed product. Standard packaging options are 20-25 kg net. 4) suction of excess air An integrated vacuum unit helps to suck out of the filled bags an excess air. The product becomes denser, less airy, and when stacking the bags pallets, the entire structure becomes more stable. The stability of the pallets is very important for the safety of the cargo during transportation. 5) sealing of the inner poly liner The line is equipped with a sealing unit, which helps to seal the inner poly liner. Sealing the liner ensures its tightness, which helps to prevent the moisture penetration into the finished product. Since the powder is very hygroscopic product, its reliable protection from moisture is very important for preserving the quality of the manufactured products. 6) sewing up of paper bags with/without crepe paper The line also has an integrated sewing unit for closing of the paper bags. For more reliable tightness of the packaging, a crepe paper tape in the same colour as the bag may be used additionally. The line is equipped with 3 bunkers with a capacity of 1 mt each: 1) raw material blending bunker; 2) product settling bunker after blending; 3) finished product bunker. The line has a high production efficiency and very easy maintaining and operation.

Year of construction: 2016, condition: like new (used), functionality: fully functional, Complete line for steel wire fibres production, Model M-1 ZSN 35 Fibre bending and cutting machine Machine type: M – 1 ZSN 35 Dimensions and weight: 1200 x 1050 x 1620 mm; 1200 kg Material to process: Low carbon steel wire %C 0.05 ÷ 0.12 Product to process: Hooked end fibre 0.75 x 35 / Hooked end fibre 1.00 x 50 Ijdpfxswu Dads Ag Nsih Max. number of wires to process: 15 Wire pay-off device Dimensions and weight: 5220 x 2500 x 2008 mm, approx. 2200 kg Number of spools: 15 Max spool weight: 1000 kg Wire diameter range: 0.6 – 1.2 mm Spool type: Z2, Z3 PRICE: 190,000 EUR

Year of construction: 2008, condition: ready for operation (used), Produces light sources in the form of tubes, product dimensions: 2-4x100-1200mm, including coating, cleaning, sealing, high vacuum station, labelling station and Compressor ALMIG LENTO 15. Iiedpfxeg Tvy De Ag Neh