Used Book Production Line for sale (24,710)

Condition: good (used), Schmedt hardcover book production line The machines are in very good condition and have seen little use. The set consists of the following machines: Credpoz S Uziefx Apmji – Schmedt PraLeg book block casing-in machine – Schmedt PraForm Pro book press and joint-forming machine – Schmedt SC-3 Autocase cover assembly table – Schmedt PraziCoat Pro gluing machine (coater) – Schmedt BT-1 Board Trimmer (automatic board cutter) Includes documentation, spare parts, and glue.

Condition: excellent (used), Year of construction: 2019, Ref: 10959 . 2019 DGR RHLE 30 Book Line Fully automated, compact, automatic casing-in line for short-run hard cover book production. Excellent condition, only 375,000 books made! Features: * Very short make-ready times (no need to change format parts!) * Automatic motorised format change (optional) * Simple operation by a single operator *Superior industrial book quality *Small footprint *Offline or inline operation possible *Special single copy option for individual books * Designed for books with rounded or square spines Equipped with: Book block feeder Pre-heating section for hot-melt bound books Rounding & backing station (adjustable, no size change parts req.) Back lining & Headbanding station (with hot-melt or PVA glue) Flexible case magazine for plastic or hardcover cases Case preheating & forming unit (adjustable to the spine radius) Casing-in station with PVA gluing (adjustable film thickness) Hot-melt joint gluing station with pre-melter Transfer to; FE33 Pressing & joint forming machine Cooling, drying conveyor. Specification: Mech. speed, Max: 1200 cycles/h Crodpfxey Avl Is Apmoi Format range (W x H) Max: 300mm x 300mm / Min: 100mm x 120mm Book block thickness, Max: 60mm / Min: 8mm (opt. 4mm) Dimensions: ca. 5000mm x 4000mm

Condition: reconditioned (used), functionality: fully functional, power: 110 kW (149.56 HP), Equipment: documentation/manual, Complete refurbished Amandus Kahl C35-780 pellet press production line Complete production line featuring a fully refurbished Amandus Kahl C35-780 pellet press. The Amandus Kahl C35-780 pellet press has recently undergone a complete overhaul at the Amandus Kahl factory. All documentation for the newly replaced parts is available. An overview of these parts can also be found among the photos. The production line consists of: - Amandus Kahl C35-780 pellet press - New 110 kW electric motor on the pellet press - Electrical control cabinet with emergency stop, including complete electrical documentation - Conveyor belt - Screening and cooling system that screens the pellets and cools them automatically - Hydraulic nut - Roller head in perfect condition - Including electrical wiring - Feed screw that transports the material to the pellet press - Automatic dosing system that measures the amount of pellets for filling, for example, a big bag - 4 extra dies with 6 mm holes - 60 liters of extra synthetic oil Overview of the parts replaced during the overhaul: - 7 new bearings - 2 new wear rings - 1 new air filter - 2 new oil seals - 1 new oil filter - 1 new oil pump - 20 liters of synthetic oil 800/460 - 1 new pressure piece for the main shaft Do you have any questions or would you like to inspect the complete production line? Please feel free to contact me. Codpj Agk Rijfx Apmori Sincerely, Danny van Tol Inventtol B.V.

Year of construction: 2023, operating hours: 500 h, condition: like new (used), functionality: fully functional, We offer a complete industrial production line designed for the extraction, purification, concentration and spray drying of collagen derived from fish processing by-products. The production line is designed to process fish skin and fish bones into collagen powder using controlled enzymatic hydrolysis, mechanical separation, filtration, ion exchange purification, evaporation and spray drying. The system integrates multiple processing stages into one industrial production solution. Main Equipment Included 1. Collagen Extraction and Enzymatic Hydrolysis System 3 × stainless steel enzymatic reaction tanks, each with 3,000 L effective capacity SUS316L product-contact surfaces Heating jackets, insulation and agitators Enzyme preparation and acid dosing tanks Pumps, vibrating screen and intermediate storage tanks Temperature, level and pH monitoring Siemens PLC control system 2. Separation System Industrial decanter centrifuge, model LW350, capacity 2–3 t/h Disc separator, model BDY311, capacity 2–3 t/h Stainless steel receiving and storage tanks Transfer pumps and process control system 3. Purification and Decolorization System Anion and cation exchange columns Activated carbon filtration system Stainless steel plate filtration unit Regeneration tanks Heat exchanger and transfer pumps Automated process control 4. Concentration and Drying System Double-effect falling film evaporator Water evaporation capacity: 1,600 kg/h Concentrate holding tanks Industrial spray dryer Spray dryer water evaporation capacity: 150 kg/h Hot air generation and powder collection system 5. Cleaning and Water Treatment Automatic CIP cleaning system with 4 × 3,000 L tanks CIP circulation pumps Reverse osmosis (RO) water treatment system Water treatment capacity: 5,000 L/h Stainless steel process piping and associated equipment Technical Specifications Finished product: Fish collagen powder Nominal production capacity: Approx. 1,000 kg/day Raw material requirement: Approx. 5–6 tonnes/day Crode Ahynvopfx Apmoi Steam requirement: Approx. 2 tonnes/hour Electrical power requirement: Approx. 300 kW Compressed air requirement: Approx. 1 m³/hour Cooling system: Circulating cooling water Main process materials: Stainless steel SUS304 / SUS316L Automation: Siemens PLC and touchscreen control systems Production Process Raw material washing → Enzymatic hydrolysis → Filtration → Decanter separation → Disc separation → Ion exchange purification → Activated carbon filtration → Sterilization → Concentration → Spray drying → Powder collection and packaging. Applications The production line is intended for industrial processing of fish-derived raw materials into collagen powder. Potential applications include: Marine collagen production Fish processing by-product valorization Collagen ingredient manufacturing Food ingredient production Nutraceutical raw material processing Final product specifications and suitability for particular applications depend on the selected process parameters, raw material quality and validation. Additional Information The system is designed as an integrated industrial processing line, including extraction, separation, purification, concentration, drying, cleaning and water treatment equipment. Detailed equipment specifications and technical documentation are available upon request.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, Original Japanese line for the production of cardboard books. Offline set consists of a machine for gluing cardboard books - 8 stations. Glue application from rollers. Separate press, machine for wrapping the cover. It is possible to buy a Wholenberg three-knife set with a set for rounding corners Credpfx Apowf Rnvemji I will sell to the company that offers the highest price.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, year of last overhaul: 2024, Equipment: documentation/manual, Original Japanese line for the production of cardboard books. 16 gluing stations, presses, transfers, cover attachment, three-knife, corner rounding. Capacity up to 5,000 cardboard books per hour Special cardboard folding machines included Credpfxswfr Ude Apmoi

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas Cedpfxez Rnu Te Apmjri • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. _____ Additional Information • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Condition: used, Year of construction: 2022, functionality: fully functional, Complete set of equipment for foam production and converting – HYMA and supplementary equipment Offer description For sale is a comprehensive set of machines and equipment for the production, processing, and converting of foams, including equipment for foaming, granulation, storage, sheeting, processing of cylindrical blocks, and precision cutting. The offer includes machines from renowned manufacturers, including HYMA, as well as auxiliary and installation equipment. The set allows for the implementation of many stages of the technological process – from foaming and material processing to its treatment and cutting. Most of the equipment dates from 2021–2022. The offer also includes an unused steam generator and an unused prepolymer tank. 1. Equipment for production and material preparation 1.1 HYMA BFH-15 foaming line (2021) Three foaming stations: - two stations for rectangular blocks with dimensions 2080 × 1080 mm and 2080 × 1580 mm, - one station for cylindrical blocks with a diameter of 1400 mm and a maximum height of 2100 mm. Two-screw mixer with a volume of 15 m³. Maximum foam density: 300 kg/m³. 1.2 HYMA GMK-80 granulator (2021) Main motor power: 55 kW. Interchangeable screens: Ø 5, 10, 20 and 25 mm. Output: approx. 1000 kg/h with a 25 mm screen. Conveyor fan: 15 kW. Loading belt conveyor: 1 kW. 1.3 HYMA GMP-75 granulator (2021): Motor power: 75 HP (approx. 55 kW). Interchangeable screens: Ø 5, 10, 20 and 25 mm. Output: approx. 500 kg/h. 1.4 HYMA GFH-330/7 silo (2021) Capacity: 45 m³. Height: 5300 mm. Diameter: 3300 mm. 2. Equipment for sheeting and processing of foam blocks 2.1 HYMA SSB precision sheeting machine for single blocks (2021) Maximum sheeting height: 105 cm. Maximum foam density: 250 kg/m³. Csdj Agwbaepfx Apmori HYMA SCH-700 carousel sheeting machine (2021) 2.2 Carousel structure for sheeting foam blocks. Table diameter: 7000 mm. 2.3 HYMA RH drilling machine for cylindrical blocks (2021) Equipment for drilling cylindrical foam blocks. 2.4 HYMA RSS-220 machine for trimming cylindrical blocks (2021) Equipment for trimming and processing cylindrical foam blocks. 3. PTV WJ2116-1Z-Dynamite CNC waterjet cutter (2022) Cutting with a pure water jet, without the addition of abrasive material. "Dry" work tank. Interchangeable tables. Working area: 2100 × 1600 mm. 4. Auxiliary and installation equipment 4.1 CERTUSS Universal 850 TC steam generator (2022) Nominal steam output: approx. 850 kg/h. Thermal power: approx. 558 kW. Includes a water treatment station. Status: unused. 4.2 Prepolymer tank (2022) Nominal capacity: 20 m³. Status: unused. Summary The offer includes 11 items of equipment and production equipment, intended for use in a plant that manufactures and processes foams. The set may be of interest to manufacturers planning to expand existing production capacity, start a new plant, or acquire equipment for subsequent stages of the technological process. Year of equipment production: 2021–2022. Sale: preferably as a complete equipment package. The possibility of purchasing individual equipment requires agreement with the seller. Detailed information regarding the technical condition, availability, location, and terms of sale will be provided to interested buyers.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, The VEMAG sausage production line is a complete set of three cooperating VEMAG machines: the HP30E vacuum filler (2012), the LPG 208 length-portioning linker (2014), and the AH212 hanging machine (2016). The set covers the entire process from filling the casing, through portioning and linking sausages into lengths of a set size, to automatic hanging on smoke sticks, enabling efficient and repeatable production in medium and large meat plants. How does the VEMAG sausage production line work? Key advantages of the VEMAG sausage production line Vacuum operation ensures a compact, uniform stuffing without air pockets, improving the appearance, color, and shelf life of finished sausages. The LPG 208 linker allows cooked, fresh, and dry sausages to be produced on one machine, using natural, collagen, cellulose, and polyamide casings, and its automatic casing pusher shortens changeover times. Interchangeable dividing belts with quick-release catches can be changed in under 1 minute, and the linking speed can be set separately for each casing type. Gentle handling protects casings, including overlapped ones, and the hygienic design allows low-pressure cleaning. The AH212 hanging machine allows any hanging pattern (individually, in pairs, in threes, in fours, etc.) and ensures ergonomic work, reducing operator physical strain. All three units come from a single manufacturer and are designed to work together, which simplifies control, operation, and servicing of the entire line. Technical specifications of the VEMAG sausage production line VEMAG HP30E vacuum filler (Filler) Manufacturer: VEMAG Model: HP30E Year of manufacture: 2012 Filling capacity: up to 8,700 kg/h Portion weight: 5 g to 99,999 g Air consumption: approx. 40 l/min Portioning speed: > 600 portions/min Vacuum system: 40 m³/h Capacity: 350 l VEMAG LPG 208 length-portioning linker (Linker) Manufacturer: VEMAG Model: LPG 208 Serial number: 2080470 Year of manufacture: 2014 Power supply: 400–460 V, 3~, 50/60 Hz Rated current: 7 A Power: 4.5 kW SCCR: 5 kA rms Weight: 517 kg Caliber range: approx. 13–40 mm and more Filling rate: from approx. 300 to 4,400 kg/h (depending on casing type and caliber) Linking head: twin, casing change in under 2 s Dividing belt changeover: under 1 min VEMAG AH212 hanging machine (Hanging Machine) Manufacturer: VEMAG Model: AH212 Serial number: 2120444 Cedpfez N A Niex Apmjri Year of manufacture: 2016 Power supply: 400–460 V, 3~, 50/60 Hz Power: 0.5 kW SCCR: 5 kA rms Weight: 298 kg

Condition: new, Year of construction: 2025, functionality: fully functional, AUTOMATIC PRODUCTION LINE FOR HEAT EXCHANGERS FOR HEAT PUMPS BRAND NEW – IN STOCK – READY FOR DELIVERY A brand-new, fully automatic production line designed for manufacturing heat exchangers for heat pumps is available for sale. The line covers the entire production process, from tube bending to reinforcement welding, incorporating advanced welding technologies. Main Features and Capabilities: 1. Automatic tube bending and heat exchanger forming. Cjdpfx Apo Afqygemori 3. TIG welding system for precise, high-quality welds. 4. High-speed induction welding system for an efficient production process. 5. Automatic reinforcement welding. 6. Compatible with tube diameters ranging from Ø 26.9 mm to Ø 33.7 mm. 7. Adaptable to other tube diameters and flat tubes, according to customer requirements. 8. Integrated production process designed to ensure high repeatability, consistent quality, and manufacturing efficiency. Investment Benefits: This production line is an ideal solution for manufacturers of heat pumps, HVAC equipment, and industrial heat exchangers looking to increase production capacity, automate key manufacturing operations, and reduce manual labor requirements. Equipment Status: Brand-new production line, available immediately. For further information, technical documentation, configuration details, and pricing, please contact us.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Rubber extrusion NBR&PVC Insulation sheet production line / available immediately The machine line can be delivered immediately, with few operating hours and in new condition. Crjdpfxjy Exrpo Apmji Production line units: 1. Zhejiang Baina 150 20D 1000Kg/h cold feed vacuum extruder (Standard) 2. Zhejiang Baina EJ-PPF-150-04-00 conical die (Pneumatic) 3. Zhejiang Baina 6m infrared curing oven (width 1000mm) 4. Zhejiang Baina 6m hot air curing oven (width 1140mm) 5. Zhejiang Baina 6m hot air curing oven (width 1440mm) 6. Zhejiang Baina 6m hot air curing oven (width 1600mm) 7. Zhejiang Baina 6m hot air curing oven (width 1800mm) 8. Zhejiang Baina 6m hot air curing oven (width 2000mm) 9. Zhejiang Baina 6m hot air curing oven (width 2300mm) 10. Zhejiang Baina 6m hot air curing oven (width 2500mm) 11. Zhejiang Baina 6m hot air curing oven (width 2800mm) 12. Zhejiang Baina 36M FF-SLX-02-00 (3 layers * 12m) cooling system 13. PCM automatic longitudinal and transverse industrial cutting machine 2000mm 14. AC-15AD liquid chiller with 285 liters water tank If you are interested, we will send you a detailed description and data.

Condition: used, Year of construction: 2011, functionality: fully functional, input voltage: 400 V, RADEMAKER / RONDO Topline ASTec.W industrial line – Production of layered and filled products Complete RADEMAKER / RONDO industrial line for sheeting, gauging, shaping, filling, and cutting dough products. The equipment was previously used for the industrial production of salmon en croûte. Thanks to its modular design and numerous workstations, it can be adapted to other pastry, viennoiserie, and savory or sweet layered product productions, subject to the necessary tooling and adaptations. 1. RADEMAKER Block Processor – 2006 Industrial equipment designed for the gradual reduction of dough blocks into a homogeneous strip, particularly for processing layered dough blocks. Type: Block Processor Year: 2006 Serial number: 280053 Working width: 650 mm Belt width: 650 mm Weight: 1,725 kg Power supply: 240/415 V, three-phase, 50 Hz, 17 A Documented dimensions: 6,000 × 1,400 × 2,850 mm 2. RONDO Topline ASTec.W Industrial line for shaping and preparing filled products. Model: Topline ASTec.W Line reference: D2147 Csdj Abz D Iopfx Apmjri Manufacturer documentation: edition 01/2012 ASTec hygienic design adapted for wet cleaning. Documented composition: Dough feeding and conveying belts. Two RONDO flour dusting devices. RONDO laminator, working width 740 mm, belt 700 mm. 15-meter industrial shaping table, 700 mm belt, with marking, cutting, and spraying devices. RONDO Rondofiller dosing unit for filling application. Overlay conveyor for working with two layers of dough. Gauging unit. RONDO ZST600 cutting station. RONDO station, model ZKWA605A.A, year 2011, machine number D1221401, working width 660 mm. RONDO guillotine, model ZGEM700W.A, year 2009, machine number C9273305, with documented tooling of five 80 × 125 mm dies. Dough scrap recovery system. Electrical control cabinet and Siemens operating interface. 3. Applications The line was used for the production of products based on salmon wrapped in dough. It also offers possibilities for adaptation to various layered products, turnovers, pastries, filled specialties, and preparations involving two layers of dough. Other applications can be considered depending on the cutting, shaping, and dosing tools available or to be installed. 4. General characteristics Manufacturers: RADEMAKER / RONDO Years of major equipment: 2006, 2009, and 2011 Total length of the documented configuration: approximately 24 meters Documented maximum width: approximately 2 meters Documented maximum height: approximately 2.85 meters Width of production conveyors: up to 700 mm depending on the section Technical documentation and manufacturer's manuals available. Industrial line consisting of several modules that can be considered for adaptation to other productions. The exact composition, available accessories, and production possibilities must be confirmed during technical inspection.

Condition: used, Year of construction: 2020, functionality: fully functional, AL-2400 mm SS PP Spun-Bond Machine Line ( Filament 1.5D-1.8D ） -Raw Material： Polypropylene granule，master batches，additive -Production Process: With high temperature filament drawn, certain proportion of polypropylene, master batches and additive are drawn into net by negative pressure, which are boned together being into fabric by calender. -Annual Output: 4800 Tons/Year（30gsm） -Fabric GSM: 9-60 g/m2 Csdpfszlg Iiox Apmsri -Installed power: Around 1500KW

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is a complete, modern production line for manufacturing and processing electric motor stators, produced by the reputable NIDE Group (year of manufacture: January 2017). The machines are fully automated (CNC/PLC control) and formed a cohesive production flow within the facility. The equipment has CE certification. The complete line consists of 5 processing stations: Coil Winding Machine: Model RXL2-160. Crodpfx Ajzuukqspmoi Winding Inserting Machine: Model QX1-150/160. Middle Forming Machine: Model Z2XJ1-160/190. Double Side Lacing Machine: Model BXIIL1-160/160 (with a rotary table integrated into the process). Final Forming Machine: Model Z3XJ1-200/210T (with its own hydraulic power unit). Along with a comprehensive set of tooling! We also sell the original toolboxes containing mandrels, forming heads, and dies, which enable quick changeovers for production (as seen in the photos). The line is ready for loading from the warehouse in Ostrzeszów. Please contact us.

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Csdpfji Akrksx Apmsri Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Condition: used, The Rondo pizza system is an industrial production line for processing pizza dough, from dough sheet forming and calibrating to pressing and preparing for topping. The line consists of a 4-row WP head machine, Type TWS (year of construction 2015), and a Rondo dough sheet former, Type Laminazione (year of construction 2001), with a dough sheet width of 600 mm and a capacity of 1,800 kg/h. Further components include a hopper with a star roller divider, flour dusters, belt conveyors, a cross roller, calibrating roller sets, punching and spike rollers, a guillotine, and leftover dough return systems. The system features belt proofing units and feeding systems for the dough pieces and the pizza press. The heated pizza press achieves a capacity of 4,128 pieces per hour and is designed for pizza sizes of 250, 280, and 340 mm. Additional equipment includes a vacuum suction depanning device, a spike press, oven outlet and curve belts, and conveyors for the topping line. A herb spreader and a water-moistening unit complete the system. Pizza System Rondo – Components and Equipment WP head machine, Type TWS, 4 rows, year of construction 2015 Rondo dough sheet former, Type Laminazione, year of construction 2001 Dough sheet width: 600 mm Capacity of dough sheet former: 1,800 kg/h Hopper with star roller divider Flour duster Crsdj Ahn E Ujpfx Apmoi Belt conveyor system Cross roller Calibration rollers 1 and 2 Additional flour duster Retracting belt for leftover dough Ascending conveyor to belt proofer, belt width 1,000 mm Belt proofer, belt width 1,000 mm Internal dimensions of belt proofer (L × W × H): 14,300 × 3,000 × 2,394 mm Conveyor to topping line 1 Additional flour duster Cutting roller Spike roller Guillotine Automatic retracting belt for leftover dough Metal conveyor belt with tank Setting device from 750 mm to 1,600 mm Dough piece feeding system Dough piece proofer Feeding system to pizza press Heated pizza press Pizza press capacity: 4,128 pcs/h Pizza sizes: 250, 280 and 340 mm Vacuum suction depanner after pizza press Spike press Oven outlet belt with setting device Curve belts, 750 mm Topping line conveyors (without waterfall spreader) Herb spreader and water-moistening unit

Year of construction: 2016, operating hours: 20 h, condition: used, functionality: fully functional, machine/vehicle number: MT-108/2016, We are offering a used IPVET EPS/MW Custom Sandwich Panel Production Line, manufactured in 2016. The machine has seen very little use. Manufacturer: IPVET Model: EPS/MW Custom Sandwich Panel Year of Manufacture: 2015 Condition: Used Category ID: 1059 Type: EPS/MW Sandwich Panel Production Line The EPS/MW (Expanded Polystyrene/Mineral Wool) sandwich panel production line is suitable for the manufacture, staging, and packaging of assorted types and sizes of sandwich panels with insulation. The line includes all necessary electrical circuits, hydraulic system, and control units required for operation. The production line is capable of manufacturing the following products: - EPS roof panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - EPS wall panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - MW roof panels with insulating thicknesses: 80mm, 100mm, 120mm - MW wall panels with insulating thicknesses: 80mm, 100mm, 120mm Raw materials used in production: - 0.4-0.7mm x 1250mm pre-painted, galvanized steel sheet - EPS 80 Expanded Polystyrene boards - MW Mineral Wool (Spanrock XL) - Adhesive (polyol) - Adhesive (isocyanate) Machine Units/Equipment included in the Sandwich Panel Production Line: The EPS/MW sandwich panel production line is a comprehensive system consisting of several machines and equipment. The production line comprises the following units: 2.1. Decoiler for external steel sheet with trolley 2.2. Trapezoidal roller conveyor Bobp Ergeyw Tmlocyodf 2.3. Shearing knife for cutting steel sheet 2.4. Micro-corrugation roller conveyor 2.5. Edge-forming roller conveyor for standard joint outer facing 2.6. Edge-forming roller conveyor for concealed joint outer facing Credpeyw Tmljfx Apmsi 2.7. Decoiler for internal steel sheet with trolley 2.8. Shearing knife for cutting steel sheet 2.9. Micro-corrugation roller conveyor 2.10. Edge-forming roller conveyor for internal facing 2.11. EPS/MW insulation dispenser unit 2.12. Insulation material conveyor belt 2.13. EPS/MW insulation trimming knives 2.14. Adhesive application unit 2.15. Pump 2.16. Adhesive spreading unit 2.17. Laminating roller conveyor 2.18. Cutting saw 2.19. Accordion roller conveyor 2.20. Roller discharge table 2.21. Stacking and flipping unit 2.22. Transport trolley for stacking 2.23. Packaging unit 2.24. Chain conveyor unit for material handling If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: DB023401A, total length: 4,800 mm, total width: 1,345 mm, total height: 1,800 mm, type of input current: three-phase, input voltage: 400 V, working width: 300 mm, power: 6 kW (8.16 HP), control cabinet height: 2,200 mm, The Cefla All-in-One Wood Finishing Machine is an integrated solution for applying, distributing, and impregnating coatings on wooden floors. The machine combines a double roller applicator with two polishing brushes in a single, compact frame. The roller station can be used as a single applicator roller or in reverse configuration when the second station is activated. The polishing brushes are individually adjustable in terms of angle and speed, allowing the finishing process to be precisely tailored to the desired end result. Credpfe Ahpldsx Apmsi This machine is ideally suited for finishing wooden floors and other flat wooden products, combining the application of oil or varnish and polishing in a single, compact production line. The machine is suitable for processing oxidative oils and can also be used for suitable UV- and LED-curing oils when combined with additional UV or LED drying equipment. Operation is via a central control panel, which ensures clear and efficient control of multiple finishing steps from a single machine. This specific Cefla All-in-One Wood Finishing Machine is offered as a used machine. The machine has been technically inspected in our workshop and is supplied with used brushes and rollers.

Condition: repair required (used), For sale at a favorable price: Please send us your price offers. Mattress production line for overhaul or dismantling. Manufacturer: KSM, approximately 25-30 years old. The system is aging and requires a thorough overhaul; otherwise, it is functional. It has only been used infrequently by us. However, it is also interesting as a source of spare parts for dismantling. Control system with Lenze frequency inverters, Siemens PLC, conveyor belts, many motors, sensors, metal, aluminum profiles, needle grippers, etc. Consisting of: Gantry: Plate feeder with needle gripper (for automatically placing individual foam plates onto an alignment station with a conveyor belt). Roller adhesive application system (here, the foam plates are passed through on the conveyor belt and adhesive is applied by rollers). Crodpfxo Aba Nco Apmsi Padding carrier feeder with needle gripper (for automatically placing padding carriers (felt) onto the foam plates that have been wetted with adhesive). Adhesive tunnel with adjustable nozzles (here, the pre-assembled plates are sprayed with adhesive on the conveyor belt to allow the frame to be glued). After that, the material can be removed from the conveyor belt to assemble the mattresses. Several hundred mattresses per shift are possible. The system will only be sold as a whole. Dismantling and transport must be handled by the buyer. (EXW)

Condition: excellent (used), Hardcover book production machinery/equipment as a package The machines were only used a few times for training purposes. Crsde Agw Evepfx Apmsi Please note that the machines will only be sold as a complete package! ____ Two-roller edging machine Schmedt PräziCoat Year of manufacture 05/2021 Type 238-20 / Roller width 400 mm Cover machine Schmedt PräDeck Year of manufacture 04/2021 Type 2360 Edge banding machine Schmedt PräKant Year of manufacture 04/2021 Type 1600 Book inserting machine Schmedt PräLeg XL Year of manufacture 05/2021 Type 18-60 Book press Schmedt PräForm XS Year of manufacture 12/2020 Type 72-00

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, Insulation glass production line for Low-E glass LiSEC – Austria, FiT.Line 3, h=2.5 m, c.y. 2012 Crodpfj Ahi Upsx Apmsi Max. glass dimensions 3500 x 2500 mm Max. thickness of the glass unit 60 mm The line can make shapes. In very good technical condition. Available: now Inspection during production is possible by appointment. - Washing machine (6 brushes) - Frame mounting station - Automatic gas-filling press/assembly press - Roller tilt table - Automatic sealing machine (shape data to be input manually)

Condition: excellent (used), Year of construction: 2016, operating hours: 9,001,700 h, functionality: fully functional, machine/vehicle number: N/A, PACE MEAT BONING LINE FOR BUTCHERY OPERATION. DOUBLE SIDED PACE BUTCHERY CONVEYOR LINE EXTENDING TO A TRIMMING AND PACKING LINE APPROX LENGTH 28m. SPACE FOR 16 BUTCHERS 8 PER SIDE WITH CENTRAL BONE REMOVAL CONVEYOR . SPACE FOR BANDSAW AND DERINDER MACHINES WITHIN THE PROCESS. Cjdpfx Aey Uk A Sepmsri VARIABLE SPEED CONVEYOR TO DICTATE PACE SPEED OF LINE .

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, Credeyi Ezkopfx Apmsi - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, The Mécan'Outil TGV/S automated production line is designed for the assembly of roller shutter casings made from PVC and aluminum profiles. The machine was delivered to a production facility in 2021. The unit is in very good technical and visual condition, making it an excellent investment for companies involved in the production of roller shutter systems. Price: 85,000 EUR (negotiable) Detailed technical specifications are available in the attachments. Credpfx Aoz E Nzcjpmsi Please contact us for further information and to arrange a viewing of the machine. This is a fully equipped production line that can quickly begin operation in a new facility. Highly recommended.

Condition: good (used), functionality: fully functional, Doughnut production line – FettBack device, Jufeba Codpfe Afaaiox Apmsri Type: TK-2000 -20 kW