Used Climatic Chamber for sale (5,433)

Condition: used, Year of construction: 1995, machine/vehicle number: 15809, functionality: not functional, Vacuum Dryer / Drying Chamber DWT / IWT MD 2600 x 15000 Used Compact System The machine is still connected to power and heating but has not been in use for the past 6 months. *PLC control renewed in 2014* *Vacuum pump defective* Dryer diameter: 2600 mm Dryer length: 15000 mm Package length: 15000 mm Package width: 1200 mm Package height: 2100 mm Gross capacity: 38 m3 Net capacity: 25 m3 of sawn timber or 18 m3 of log wood Electrical connection: 50 kW Power consumption: 18 kWh Drain: 50 mm Water connection: 25 mm Heat connection: 87 kW, 85 °C hot water at the dryer Heat consumption: 500 kcal per liter moisture or 0.6 kW per liter moisture Including heating boiler operated with heating oil (*approx. 15-20 years out of service*) Hydraulic, fully automatic boiler closure Boiler material: solid stainless steel according to DIN, x5 Cr Ni 189 150 mm insulation, sheathed with 1 mm galvanized steel sheet 1 rail bridge in front of the boiler 5 trolleys for loading and unloading, each approx. 3000 mm long 15 fans with Siemens motors Heating register as stainless steel finned tubes with aluminum fins, approx. 180 m long, surface area 280 m2, diameter 25 mm Supply and return pipes, diameter 80 mm Heating medium: 85 °C hot water at the user Circulation pump capacity: 75 m3/h Ppjdsy Aawnepfx Adlor 3 fans for steam condensation Rails in front of the dryer: 16000 x 600 mm The entire system stands on a concrete foundation and can be lifted and loaded as a single unit with a crane. Dimensions for transport: approx. 21000 mm long, 3050 mm high (without cooling system) Sale from location 52146 Würselen, without dismantling, without transport and installation. Dismantling, loading, and transport by us optionally available. Subject to error in description and price. To avoid possible misunderstandings, inspection on site by appointment is possible and recommended. Sale as is.

Condition: used, Year of construction: 2005, inner dimension length: 14,000 mm, inner dimension width: 1,250 mm, inner dimension height: 1,850 mm, total length: 15,900 mm, total width: 2,500 mm, total height: 3,000 mm, overall weight: 12,000 kg, Equipment: CE marking, No. 3262 Vacuum dryer / drying chamber Kronseder KCT 2400 Used, year of construction 2005 The machine was in operation until 2024 and remains connected to electricity and hot water until July 2026 Capacity approx. 32 m3 Heating via hot water Stainless steel chamber Chamber diameter approx. 2000 mm External length of chamber approx. 15000 mm Internal length of chamber approx. 14000 mm Width of wood stack 1250 mm Height of wood stack 1850 mm Transport dimensions approx. 15900 x 2500 x 3000 mm LWH Weight approx. 12000 kg Psdpfxsyy R D Te Adljpr Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm Podsfrvzvepfx Adlspr casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair in the overhaul plant. It can be carried out in the scope of agreement.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, inner dimension length: 5,400 mm, inner dimension width: 750 mm, inner dimension height: 850 mm, total length: 6,500 mm, total width: 950 mm, total height: 1,500 mm, number of chambers: 1, control type: PLC-controlled, fuel type: electric, We are offering this very well-maintained Lauber longitudinal flow dryer type 2 S6 chamber dryer, year of manufacture 2022. Type/Plant No.: 2 S-6 / 44217 Rated voltage: 3pH AC 400/230 V 50 Hz Fan motor rated power: 1.1 or 0.75 kW Fan motor rated current: 7.1 A Electric heater rated power: 7.5 kW Total rated power: approx. 15 kW Total rated current: 25 A Pre-fuse (slow-blow): 25 A Pjdoy Hdmnjpfx Adlepr Control voltage: 24 V DC Wiring diagram no.: SP361 RV Year of manufacture: 2022 Technical details: A double-shell thermal insulation of the wood dryer guarantees excellent insulation properties. The inner wall cladding is made from 1.5 mm thick, seawater-resistant special aluminium and is tightly welded. The outer cladding consists of stucco trapezoidal and stucco smooth sheet metal. The thermally insulated floor is designed as a tightly welded stainless steel tray and is permanently resistant to aggressive wood substances. The wood dryer should be installed on a stable, level surface; no special continuous foundation is required! A front door with a wide opening angle and all-round rubber seal ensures convenient operation and high steam tightness. An aluminium trolley for side loading and unloading, along with interior rails and removable exterior rails, enables comfortable and space-saving loading. Efficient and uniform longitudinal ventilation of the wood stack is ensured by a powerful radial fan (0.55 kW) mounted on the end face. The chamber is heated by electric heating rods with a heating capacity of 6.0 kW. Excess moisture is extracted via servo-controlled 100 mm intake and exhaust dampers. Chamber humidity can be increased if necessary by cold water atomization. 140 straight aluminum stacking battens are included in the delivery. The standard PLC control (SPS) regulates the drying process fully automatically and, thanks to a 7'' color touch panel, offers user-friendly operation. Simply enter three parameters: 1. Wood species 2. Lumber thickness 3. Desired final moisture content Based on this data, the system optimally controls the drying process, allowing you to obtain your wood in the desired quality in a short time. The standard control equipment includes: - 3 pcs. wood moisture measuring points with drive-in electrodes and sensor cables - 1 pc. wood equilibrium moisture measuring point - 1 pc. air temperature sensor We supply the Lauber wood dryer fully assembled and ready for connection! Detailed operating instructions, drying recommendations, as well as installation and loading instructions are included. Original price: EUR 31,120 plus VAT Previous lead time: 15 months The dryer has been used for around 30 drying cycles and is in very good condition. If you have any questions or require further information, please feel free to send us a message or give us a call.

Year of construction: 2024, condition: ready for operation (used), The heat exchangers are part of the system but were commissioned separately. The new price of the system was therefore over EUR 2 million. Ppedpfeyt Ihbjx Adlor The official commissioning took place in April 2024; however, this only involved trial runs and not series production. Technical Data – Modular Chamber Furnace System for Homogenizing Aluminum Billets (Used Equipment) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum billets in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks System Construction The system essentially consists of: • 1 preheating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air circulation • 1 charging machine (BSN 1612) – electric/hydraulic • 12 charging racks (BSN 1614) • Control system with PLC (Siemens S7 1515F 2PN, Profinet) and operator panel • Contact thermocouples for direct billet temperature measurement The system is designed as a complete machine in accordance with Machinery Directive 2006/42/EC (CE compliant). Further information can be found in the attached PDF.

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: SN49983, functionality: fully functional, Chamber Furnace, Very Good Condition. 12 Months Warranty - Max temperature 1300°C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - Heating on 5 sides - Inlet and exhaust air with dampers, electrically operated via Belimo actuators - Intake fan controlled by frequency converter via controller - JUMO control system (switchable to other languages!) - Additional type S trailing element for external data recording - Documentation - Net weight: 250 kg - Power consumption: 18 kW - Current draw: 26 Amps - Connection voltage: 3/N/PE 400VAC - Connection variant: prepared for fixed connection, 32A plug - Documentation, CE declaration - Electrically tested and supplied with current DGUV test protocol Inspection by appointment. Furnace, ovens, annealing furnace, industrial furnace, chamber furnace, kiln, baking oven, tempering oven, laboratory furnace, hardening furnace Psdpfx Adex U Ekdslopr

Condition: used, Year of construction: 1993, machine/vehicle number: 2.4836.93, functionality: unexamined, input voltage: 380 V, input current: 8 A, input frequency: 50 Hz, type of input current: AC, temperature: 80 °C, number of chambers: 1, Equipment: documentation/manual, We offer a vacuum dryer. This system can dry 4.8–5.5 m³ of wood. The unit is in good condition and can be inspected by appointment. Ppedpfxoy En Iyj Adlor

Condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch temperature test chamber water cooled Temperature range -70°C to + 180°C Temperature deviation temporal ±0,1 to ±0,5 K Temperature deviation in time ±0.5 to ±2.0 K Temperature change rate cooling 7.5 K/min Temperature change rate heating 7.5 K/min Heat compensation +20°C 3000 W Heat compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 450 mm Height 750 mm Outer dimensions: Width 870 mm Depth 1280 mm Height 1575 mm Observation window: Width 300 mm x height 540 mm Test chamber volume 190 litres Rated voltage: 3/N/PE AC, 400 V ±10 %, 50Hz Rated power: 10.5 kW Rated current: 22 A Fuse, on-site: 32 A slow-blow Sound level at 1m distance (free field measurement) < 69dB (A) lateral feed-through 50 cm / 125 cm Cabinet is water cooled Refrigerant: R 404A and R 23 Weight approx. 460 kg Type: VTS 7018-5 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. function check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) Podpjhh H Hisfx Adlopr (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer gladly on the phone for you.

Condition: excellent (used), Heraeus Vötsch Type: VTS 7018-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Temperature change rate (cooling): 6.5 K/min Temperature change rate (heating): 7.5 K/min Heat compensation: 4,500 W Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1,280 mm x Height 1,575 mm Viewing window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW Rated current: 21 A Supply-side fuse: 32 A slow-blow Sound level at 1 m distance (free-field measurement): < 63 dB(A) Lateral port: 50 cm / 125 cm Chamber is water-cooled Refrigerants: R452A and R23 Weight: approx. 460 kg Important safety information for buyers: The following procedures are carried out on all chambers offered by us: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, all chambers are subjected to a documented trial run. Condition: used Scope of delivery: (see photos) (Technical data and specifications subject to change and errors!) If you have further questions, we are happy to provide information by phone. Ppedpjyu Rhgjfx Adler

Condition: like new (used), Chamber filter press from Netzsch. 20 plates 40x40 cm. Condition: excellent. Psdpfx Adexn Azdjljpr

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, overall weight: 1,100 kg, total length: 6,200 mm, total width: 1,000 mm, total height: 1,900 mm, loading space length: 4,500 mm, loading space width: 800 mm, loading space height: 600 mm, tank capacity: 2,100 l, KIT 250 For joiners, carpenters, musical instrument manufacturers, woodturning shops with 1.5 - 2.5 cubic meters of wood stacking space and a stack width of 0.80 m - 1.00 m. Ppedetqlp Rspfx Adlor The energy-saving system works according to the principle of conventional drying with a supply air flap and an exhaust air flap. an exhaust air flap. The vacuum pump is used for rapid dehumidification.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,850 kg, total length: 6,000 mm, total width: 1,700 mm, total height: 1,900 mm, loading space length: 5,300 mm, loading space width: 900 mm, loading space height: 1,100 mm, energy consumption: 3 kWh, tank capacity: 5,200 l, Test dryer EUROVAC vacuum dryer KVT 550 For further information please contact us. Pedpstqlqaofx Adlspr

Condition: ready for operation (used), Year of construction: 1999, IMMEDIATELY AVAILABLE, chamber filter press from Häcker with base frame and 50 m3/h Abel pump, plate format 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake, content approx. 2700 liters, automatic. Plate transport, open outlet in filtrate trough on both sides, press is ready for use immediately after assembly, Abel pump was serviced by the manufacturer shortly before it was taken out of service, galvanized base frame with staircase, location is near Würzburg / Germany Ppjdpfx Adjrunu Ijlsr

Condition: excellent (used), TIRA Type: TCZ 4022 S -2K Description: Air-cooled climate simulation chamber System Structure: The unit consists of the following main assemblies: - Walk-in, insulated chamber - Air handling room - Humidification system - Machinery room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40...+140°C - Temperature stability, in supply air (temporal): ≤ ±0.5°C (without thermal test chamber load, according to DIN 50011 T13 / EN 60068) - Temperature stability, in supply air (spatial): ≤ ±1.0°C (without thermal test chamber load, according to DIN 50011 / EN 60068) - Heating rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C - Cooling rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C Performance Range for Climate Testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% RH (without thermal test chamber load) - Dew point temperature range: +5...+89°C (without thermal test chamber load) - Humidity stability (in supply air, temporal): ≤ ±2.5% RH, measured in supply air Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% RH (without thermal test chamber load; with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal test chamber load) Dimensions: - Test chamber (WxDxH): approx. 2260 x 4648 x 2260 mm - External dimensions (WxDxH): approx. 2660 x 6460 x 2800 mm - Clear door passage test chamber door (WxH): 2260 x 2260 mm - Climate module KB 127 (WxDxH): 1700 x 800 x 1400 mm - Control cabinet (WxDxH): 800 x 500 x 2000 mm Design: - Airflow: Supply air via perforated plate at the rear wall, ceiling area; exhaust air via perforated plate at the rear wall, floor area - Temperature control: Direct cooling via evaporation of refrigerant in a finned heat exchanger; heating via electric resistance heater - Dehumidification: Direct dehumidification via refrigerant evaporation in a heat exchanger - Interior lining: Stainless steel - Exterior cladding: Galvanized, plastic-coated steel sheet - Floor: Stainless steel, floor load 15,000 N/m² - Wheel load (contact area ≥4 cm²): 1,500 N/wheel - Door: Double-leaf, stainless steel, externally coated with viewing window (WxH): 1000 x 1000 mm - Test area lighting: 4 spotlights, 500 W each - Insulation: Dual-layer insulation, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc): Bitzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc): EDB 40 Color scheme: - Chamber RAL 9010, white - Door RAL 9010, white - Machine unit RAL 7032, pebble grey Ppsdpfx Asvx S Hhodlor - Control cabinet RAL 7032, pebble grey Weights: - Total system: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification unit: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10%, 3/PE N, 50Hz - Rated power: 95 kW - Rated current: 150 A

Condition: good (used), Weiss Pjdpfx Adsuvi R Aslepr Type: Walk-in Climate Simulation Chamber WK 50 / 40-120 Technical specifications of the climate chamber: Temperature range: -40...+120 °C Temperature tolerance: +/- 0.5°C Temperature change rate: 1 K/min Humidity range: 15...approx. 95 % RH Humidity tolerance: +/- 5.0 % RH Dimensions: Test space volume: 50 m³ External dimensions (W x D x H): approx. 4800 mm x 6100 mm x 2640 mm Test chamber (W x D x H): approx. 4500 mm x 5000 mm x 2200 mm Door opening (W x H): approx. 3000 mm x 2200 mm Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Condition: good (used), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45L Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% r.H. Humidity tolerance: +/- 5.0% r.H. Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Year of manufacture: 2009 Technical data for solar simulation: Control module: Mitronic STB1-8 Number of lamps: 8 Ballast unit: Mitronic CP2k5 – 2ZS Ignition unit: Hönle Lamp type: OSRAM Powerstar HQI 2000W W/D/S Condition: used / second-hand Scope of delivery: (see image) (Specifications subject to change and errors excepted!) For further questions, feel free to contact us by phone. Pedpfouvi Nfox Adlepr

Condition: good (used), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45 Technical specifications: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Pedpfx Adeuviydjlopr Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data!) We are happy to answer further questions by phone.

Condition: excellent (used), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without heat load): 10...85°C Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min Temporal temperature deviation during climatic operation: ± 1.0... ± 1.5 K/min Change rates Heating: avg. 2.0 K/min Cooling: avg. 2.0 K/min Standard IEC 1646 is achievable with testing, solar modules up to max. 160kg weight and nonlinear ramps (setpoint jump) Drying Air drying: condensation drying Ppsdpfx Aeklv H Iedljr Humidity Air humidification: steam humidification Humidity range: 10...95 % r.h. Temporal humidity deviation: ≤ ± 3.0... ±5.0 % r.h. Dew point range: 8...80.9°C Test Chamber Test chamber volume: 7.0 m³ Dimensions Internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Swing door DIN right, heated, Width 900 mm x Height 2100 mm Observation window, heated, with blackout shutter and lockable: Width 500 mm x Height 600 mm Feedthrough: 2x, right front side, Ø 75 mm Irradiation unit, test chamber Opening: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area when using SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system: Bitzer compressor, semi-hermetic, 2-stage, air cooled Condenser: split condenser (outdoor installation, winter control) Refrigerant: R507 / R23 Temperature control system Coolant medium Tyfocor / water Mixing ratio 50/50% Coolant density: 1.072 kg/dm³ Filling quantity: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply, test chamber Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power demand: approx. 32.0 kW Supply fuse: 3 x 63, Char C (A) Power supply, SolarConstant Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: Max. simultaneous power demand: approx. 30.0 kW Supply fuse: 3 x 63, Char C (A) Overall external dimensions of the test cell including: equipment room/control cabinet and control cabinet for SolarConstant 2500 External dimensions equipment room: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber (total): approx. 2700 kg Condenser empty weight: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: good (used), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4012 S(m) Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95 % rH Humidity tolerance: +/- 5.0 % rH Dimensions: Test chamber volume: 13 m³ External dimensions (W x D x H): approx. 2260mm x 3850mm x 2780mm Ppsdpfxjuvipwj Adlsr Test chamber (W x D x H): approx. 2254mm x 2645mm x 2251mm Door opening (W x H): approx. 2251mm x 2254mm Condition: used Delivery contents: (see picture) (Subject to changes and errors in the technical data!) For further enquiries, please contact us by phone.

Condition: good (used), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4020 S-2k Technical Specifications: Temperature range: -40...+140°C Temperature tolerance: +/- 1.0°C Temperature change rate: 2 K/min Ppedpfouviumsx Adler Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 19 m³ External dimensions (W x D x H): approx. 2660 mm x 4960 mm x 3300 mm Test chamber (W x D x H): approx. 2270 mm x 3190 mm x 2756 mm Door opening (W x H): approx. 2270 mm x 2756 mm Condition: used Scope of delivery: (see picture) (Specifications subject to changes and errors!) For further questions, we would be happy to assist you by phone.

Condition: excellent (used), Here we offer you a Thermotron temperature chamber. Water-cooled Thermotron Temperature Chamber SE-1000-6-6 Internal dimensions (W x D x H): 1000 x 1000 x 980 mm Working chamber volume: approx. 980 liters Temperature range: -70ºC to 180ºC Overall heating rate: approx. 4.1 K Overall cooling rate: approx. 1.2 K Heating capacity (°C/min) -65º to 71ºC: 6.8°C Heating capacity (°C/min) -65º to 180ºC: 5.6°C Heating capacity (°C/min) -40ºC to 85ºC: 6.5°C Cooling capacity (°C/min) 85ºC to -40ºC: 4.7°C Cooling capacity (°C/min) 71ºC to -65ºC: 3.7°C Cooling capacity (°C/min) 180ºC to -65ºC: 4.3°C External dimensions (W x D x H): 1250 x 1900 x 2200 mm Electrical requirements: 400V / 5P / N / PE, 35 A Refrigerants: R508B and R404A Approximate weight: 900 kg Type: Thermotron SE-1000-6-6 Important information for you as a buyer: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Subject to change and errors in the technical data and information!) Psdoixtitopfx Adlopr If you have any further questions, we will be happy to assist you by phone.

Condition: good (used), functionality: fully functional, Year of construction: 2017, 2 pieces recirculating chamber ovens, electric, 12-month warranty - Temperature: 200°C; upgrade to 250°C available on request - Charging carts: 5 units included; conversion on request - Internal dimensions (WxDxH): 3750 x 1350 x 2300 mm - External dimensions (WxDxH): 4850 x 3880 x 1705 mm Ppsdpjy Avqwofx Adler - Usable volume: 11.6 m³ - Control: S!MPAC with touch panel - Program execution via product sensor with cascade control - Temperature limiter - Signal tower - Direct drive-in, grid rails - Exhaust air flow rate: 140 m³/min - Electromagnetic door lock - Rated power: 180 kW - Connection: 241 kW - Weight: approx. 3,500 kg - Documentation, CE declaration of conformity We are happy to offer transport, installation, and staff training. Viewing by appointment at our machinery hall is possible at any time. Oven, ovens, drying oven, industrial furnace, drying cabinet, heating oven, heating cabinet, recirculating oven, chamber oven, heating chamber, recirculating chamber oven, tempering oven, annealing oven.

Condition: excellent (used), Vötsch Psdpfsytrzfox Adlopr Vötsch Industrial Tempering Oven VTL 200/250/225 250°C 11.25 m³ 58 kW – Heat Chamber The oven will be available at a later date. Description: For sale is an industrial tempering oven / heating cabinet from Vötsch Industrietechnik GmbH. This unit is ideally suited for industrial tempering, drying, and heat treatment processes. Thanks to its large useful chamber, it is possible to process large or multiple components simultaneously. The oven is controlled by a JUMO IMAGO 500 controller, enabling precise temperature management and automated programs. Typical fields of application: Industrial production Plastics and metal processing Component drying Heat treatment Testing technology / Material testing Laboratory and research applications The system is of robust industrial quality and designed for continuous operation. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 200/250/225 Maximum temperature: 250 °C Temperature safety classes: TB Class 1 TWB Class 2 Interior: Usable volume: 11.25 m³ Internal dimensions: Width: 2000 mm, Height: 2500 mm, Depth: 2250 mm External dimensions: Width: 2900 mm, Height: 3530 mm, Depth: 2700 mm Load capacity: Internal chamber load capacity: 400 kg Floor surface load: 1000 kg Weight: Net weight: 1850 kg Electrical data: Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated current: 90 A Rated power: 54 kW Connected load: 58 kW Additional data: Minimum exhaust air volume: 600 m³/h Reduced exhaust air volume: 150 m³/h Purge time: 465 s Total steam space: 14.9 m³ Sound pressure level: < 70 dB(A) Temperature limiter shut-off temperature: 280 °C Selectable temperature limiter: 270 °C Weight: 1850 kg Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Any further questions can be answered by phone.

Year of construction: 1988, condition: used, machine/vehicle number: 8829-III, max. temperature: Vorwaerm-/Haertekammer 1000/1350 °C Ppodpfxo Rxa Ne Adlor electrical connection: 380 V kW dimensions of the machine: 1150 x 1500 x 1840 mm weight: gesamt ca. 900 kg heating capacity: Vorwaerm-/Haertekammer 9/25 kW

Year of construction: 1978, condition: used, machine/vehicle number: 5181, temperature: + 10 to + 80°C Ppodpfj Dq Adjx Adlsr usable space: width 1200 mm depth 1600 mm height 1750 mm electrical connection: 220 V space needed: 1550 x 1900 x 2200 mm high weight: 500 kg