Used Clutch for sale (1,025)

Year of construction: 2020, condition: ready for operation (used), controller manufacturer: SIEMENS, total height: 1,900 mm, This LAFRANCONI LM 400 die bending machine was manufactured in 2020. It features a NC roller feeder, a max stroke rate of 350 1/min, and a material width capacity of 60 mm. The machine operates with a 20 KN center ram force and a 45 mm stroke. Powered by a 10.6 kW asynchronous spindle motor, it adjusts from 20 to 350 rpm. Dimensions are approximately 2450×1300×1900 mm. Contact us for more information about this machine. • Max stroke rate: 350 1/min • Max material width: 60 mm • Standard center ram force: 20 KN • Standard center ram stroke: 45 mm • Air pressure for pneumatic clutch: 6 BAR Cpodpjx D Efqofx Aa Now • External dimensions of the machine (WxHxD, without protective cabin): 2000×2000×900 mm • External dimensions of the control cabinet (WxHxD): 1000×2200×600 mm • Drive: Asynchronous main spindle motor 10.6 kW / 71.3 Nm @ 760 rpm • Reduction ratio: 1:5.09 • Clutch: Unit brake (mechanical) / clutch (pneumatic) • Power: adjustable from 20 rpm to 350 rpmMachine under power Additional equipment • NC roller feeder (feeding length freely programmable) Dimensions Machine Depth 2450 mm

Year of construction: 2020, condition: ready for operation (used), This 5-axis TGT V2 Maxima was manufactured in 2020 and is in mint condition. It features an ELBARON grinding mist extraction system and includes collets for diameters up to 20 mm. Extras include robot pallets, spare spindle, and sanding wheel packs. Consider the opportunity to buy this TGT V2 Maxima. Contact us for more information. Additional equipment • ELBARON grinding mist extraction system / Robot pallets / Collets for all common diameters up to 20 mm / Spare spindle / Sanding wheel packs and associated sanding wheels (Approx. 25 pieces) Machine Benefits Technical Machine Benefits • Operating time: 42000 minutes • Machine in mint condition / original spare spindle available, eliminating waiting times for spindle maintenance / full description and installation manual included Extra Information Spindle bearing: Front/rear: 7010 CTYN DU L P4 (NACHI)/ Lubricating grease: Kluberisoflex Super LDS 18 or NBU 25 (2.75 cc per bearing)/ Tightening torque: 58 Nm (front/rear)/ Concentricity: ≤ 0.002 mm/ Motor: LENZE 7.5 kW (10 hp), 4-pole/ Speed: 0-4500 rpm (frequency converter)/ Belt: PJ-12-1143L (GATES/FENNER)/ 2 Feed drive unit - X- and Z-axis/ Stroke: X-axis: 300 mm/ Z-axis: 680 mm/ Ball screw: Type: Fixed - Supported/ Bearing: 25TAB06DBFLP4 (NACHI, 62 Nm tightening torque)/ Ball screw spindle: BIF 3210A-5 (THK, Ø32 mm, pitch 10 mm)/ Motor: BECKHOFF AM8053-0G20 (11.4 Nm)/ Clutch: SFC 050 DA2-24B-20B (MIKI PULLEY)/ 3 Feed drive unit - Y-axis Stroke: 300 mm/ Ball screw: Bearing: 25TAB06DBFLP4 (NACHI, 62 Nm)/ Cjdpex D Hi Rsfx Aa Nepw Ball nut specification: BIF 3210-5 (THK)/ Motor: BECKHOFF AM8061-0GB1 (12.8 Nm)/ Coupling: SFC 060 DA2-20B-32B (MIKI PULLEY)/ / Rotatable table - axis A/ Bearing: 7014 CTYN DUL P4 (NACHI)/ Tightening torque: 255 Nm (front), 62 Nm (rear)/ Radial runout: ≤ 0.002 mm/ Grease: Kluberisoflex Super LDS 18 (3.6 cc per bearing)/ 5th Rotary Table Assembly - C Axis/ Bearing: YRT 100 (GOLDBULL)/ Assembly torque: 14 Nm (3-stage: 40% → 70% → 100%)/ Motor: ORION_230/140 (NIMBLE/UCAM), 238 Nm/ Encoder: RENISHAW/ main coolant system/ Flow rate: 85 L/min/ Tank volume: 400 liters/ Pump: RKM206 (Rajamane, 1.5 kW, 6-stage)/ Filtration: Paper filter Para mol N 334/150 (0.01 mm)/ lubrication layout/ Oil pump: ELU-2700 (Cenlub, 3 liters, 415V AC)/ Metering Cartridge: 320410-3 (LUBE)/ steady rest (manual)/ Vertical stroke: 3 mm/ Diameter range: Ø3-Ø22 mm/ Carriage travel: 120 mm

Condition: ready for operation (used), Year of construction: 2002, Mechanical stamping press manufactured in 2002. This PRESSIX 160 CNR 6 features a capacity of 160 tons and an adjustable stroke ranging from 20 to 200 mm. It operates at a speed of 20 to 70 strokes per minute and includes a motorized slide adjustment of 100 mm. The table dimensions are 1100 x 700 mm, providing ample workspace. If you are looking to get high-quality stamping capabilities, consider the PRESSIX 160 CNR 6 machine we have for sale. Contact us for further details. • Stroke: adjustable 20–200 mm • Speed: 20–70 strokes/min (variable) • Slide adjustment: 100 mm (motorized) • Table dimensions: 1100 x 700 mm • Slide dimensions: 750 x 500 mm • Shut height: max 550 mm • Clutch/brake: pneumatic combination • Safety: hydraulic overload protection • Lubrication: automatic centralized oil Technical Specification Cedpfeym Dmgjx Aa Nspw Stamping Force 1600 Kn

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Hydraulic Thread Cutting Machine / Tapping Arm from CMA Model RHR(M) 30 D+ (demonstration unit) Technical Data: Cpedpfxeyq Hf Ts Aa New Year of manufacture: 2025 Speed: ÷125 + ÷500 RPM Torque: 255 + 64 Nm Mount: 2/Ø31 Radius: 1800 mm Capacity: M4–M30 (steel) Weight: 290 kg • Articulated arm technology: Effortless positioning of the tool above the workpiece. • Operator relief: Absorption of reaction torque protects the operator. • Quick-change system: Tool-free change of threading inserts with slip clutch. • Reduced tool breakage: High stability and precise guidance prevent tap breakage. • Increased efficiency: Significantly faster processing times compared to manual methods or large machining centers.

Condition: used, mileage: 1,848,405 km, power: 368 kW (500.34 HP), first registration: 04/2012, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2012, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, fog lights, fridge, navigation system, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, = Additional Options and Equipment = - Aluminum fuel tank Codpfx Aaoyrig Ns Nspw - Bluetooth - Brake booster - Roof spoiler - EPS (Electronic Power Steering) - Low-noise - Particulate filter - Radio/CD player - Sliding roof - Sleeper cab - Side door - Heated seats - Toolbox - Xenon lighting = Further Information = Front axle: Steered; Suspension: Leaf suspension Rear axle: Suspension: Air suspension Unladen weight: 8,628 kg Payload: 9,372 kg Gross vehicle weight: 18,000 kg Reference number: 19 Please contact Emad Al Shogran for further information. Vehicle number: 19 Scania R500 V8 / Topline / Retarder / Euro 6 / Clutch issue .: XLER4X20005291582 Transmission: Automatic Suspension: Leaf / Air Air conditioning Retarder Engine brake Cruise control Refrigerator Auxiliary heating Adaptive cruise control Lane departure warning 2 x tanks Euro 5 Clutch issue!!! = Company Information = All information without guarantee! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Mrs. Sabine Faust Email.

Condition: ready for operation (used), Year of construction: 2017, turning length 4000 mm turning diameter 850 mm turning dia. in gap 1150 mm turning diameter over slide 520 mm Cjdpfx Aajxabh To Njpw turning speeds 5.0 - 630 U/min quill: 6 MK quill travel 250 mm spindle bore 100 mm workpiece weight max. 4000 kg bed width 600 mm travel -x axis 500 mm travel -z axis 3700 mm rapid traverse X 1800 mm/min rapid traverse Z 3640 mm/min feeds X : 0.04 - 4.8 mm/min feeds Z : 0.08 - 9.6 mm/min feeds Z1 : 0.02 - 2.4 mm/min engine output 20.0 kW weight of the machine ca. 6800 kg. dimensions 6150 x 1500 x 1500 mm good / well-maintained condition (!!) original price at the time approx. 65.000 euros special price on request Description: - particularly heavy, heavily ribbed and wide machine bed - in a rigid one-piece monoblock design - induction-hardened and ground guide prisms - guarantee long-term accuracy and minimal wear - solid headstock - with high-precision, tapered roller bearing main spindle . and 100 mm spindle bore - excellent smooth running at maximum spindle speed - joystick switch for X and Z feed directly on the support - manually switched 4-stage countershaft gear, - powerful main spindle motor enables exact adjustment of the speed . and high torque for heavy machining - rapid traverse for X and Z axes enables quick positioning of the support . and reduces idle times - adjustable overload clutch in the lock case protects the feed mechanism . against damage and failures - central, handy control for feeds and thread pitches - the feed gear offers a wide range of . diametric, inch, module and metric threads - support and top slide are designed for large cutting forces - higher working precision - user-friendly functions Scope of delivery: - SINO position indicator - TOS 3x jaw chuck .. Ø 400 mm - 4-jaw faceplate chuck Ø 800 mm - 4-way tool holder - Fixed steady rest 40-350 mm - Follow-on steady rest 30-120 mm - Fixed centering point - Reducing sleeves - Chuck protection - Coolant device - Machine leveling feet - Work light - Operating tools - Operating instructions

Condition: new, thread dia. M6 - M36 turning speeds 30 - 150 U/min working area max. 1200 R angle adjustable from - to 0 - 90 Grad voltage 230 V engine output 1200 W weight 65,0 kg - Includes quick-change chuck - for use with taps - for through holes and blind holes - Swivel motor unit for thread cutting - at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting - Thread is guaranteed to be right-angled (90°) - High productivity - significant time savings compared to manual thread cutting - Quick-change chuck with integrated slip clutch - Includes swivel arm with large radius - for easy positioning of the tap on the workpiece - Highly economical due to low investment and maintenance costs - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals Scope of delivery - Operation via touchscreen - Digital drilling depth display - Quick-change holder according to DIN - Quick-change chuck - Electric motor Codpfoxab Elex Aa Nspw - 90° angle adjustment - Mounting flange Special accessories included: - BERNARDO base frame with 2 drawers * milled support surface 900 x 600 mm * including 3 T-slots (16 mm) * large storage space and 2 drawers for storing tools * 4x swivel castors including parking brake - Mounts according to DIN 376: * M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36

Condition: excellent (used), Year of construction: 2012, Ref:11057 . 2012 Autobond Mini 105 TPHS-FL B1, double sided, fully automatic thermal laminator. Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating rollers Laminating nip pressure up to 6 metric tonnes 2 x Twin Tool Temperature Controllers Sheets are laminated top and bottom in one pass Rubber counter-pressure roller becomes water heated Additional heated roller, quick-change inflatable air-shaft, and perforating mechanism for 2nd roll of film Cjdpfx Aajx U A D Ue Nspw Film is mounted on a quick-change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table Specification: Max sheet size: 106 x 106 cm (41.73” x 41.73”) Min sheet size: 28.5 cm x 32 cm (11.5” x 12.5”) 115 gsm (80 lb text) to 650 gsm (24 pt) Max speed: 60 m/min (200 ft/min) B1 sheets up to 5,000 SPH.

Condition: used, mileage: 960,000 km, power: 427 kW (580.56 HP), first registration: 08/2017, fuel type: diesel, next inspection (TÜV): 01/2026, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Equipment: air conditioning, parking heater, - Clutch new Cpjdpfx Asxglgasa Now - EGR valve new

Condition: new, thread dia. M5 - M24 turning speeds 70 - 200 U/min working area max. 1200 R angle adjustable from - to 0 - 90 Grad voltage 230 V engine output 1200 W Cpodpoxaaybofx Aa Nsw weight 65,0 kg - with micro spray system for constant cooling & minimal Cooling lubricant consumption - Includes blow-out device to remove chips, ensuring optimal visibility on the borehole - Includes quick-change chuck for using taps for Through and blind holes - Swivel motor unit for thread cutting at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting, thread is guaranteed right angle (90°) - high productivity, significant time savings compared to manual Threading - Quick-change chuck with integrated slip clutch prevents breaking of the tap - Includes large radius swivel arm for easy positioning tap on the workpiece - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals scope of delivery - Operation via touchscreen - Digital drilling depth display - Micro spray system - Blow-out device - Quick change mount - Quick-change chuck according to DIN - Electric motor - 90° angle adjustment - Mounting flange Special accessories included: - BERNARDO base frame 900 x 600 mm (Art. No.: Mounts: DIN 376: M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24

Condition: new, turning length 2000 mm turning diameter 560 mm turning diameter over slide 350 mm turning speeds 25.0 - 1500 U/min swing diameter over bed slide 350 mm turning dia. in gap 785 mm quill travel 180 mm quill: 5 MK spindle bore 105 mm spindle taper DIN 55029 D 1-8 engine output 7.5 kW weight of the machine ca. 2720 kg range L-W-H 3340 x 1150 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Clamping disc 450 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - 2 centering points - Initial filling with Shell Tellus 46 - Motor with magnetic brake in accordance with CE standard Csdpfx Asxabtpoa Njpw - Foot pedal with brake function in accordance with CE - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Slip clutch - LED machine light - Change gears - Reduction sleeve - Chip back wall - Operating tool

Condition: new, thread dia. 12 M max. turning speeds 400 U/min thread M 3 - M 12 M working area 1600 R max. working range 500 Rmin. Cpodoxabbmepfx Aa Njw weight 16.0 kg Description: The AT II models have a radius of up to 1600 mm and thanks to their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - Tool holder with 6 cutter holders • M3 20111812 DIN 371 19 • M4 20111814 DIN 371 19 • M6 20111816 DIN 371 19 • M8 20111817 DIN 371 19 • M10 20111818 DIN 376 19 • M12 20111820 DIN 376 19 - with slip clutch - Control valve with lubrication - Including compressed air motor / maintenance unit - Adapter connection size 1

Condition: new, turning length 1500 mm turning diameter 560 mm turning diameter over slide 350 mm turning speeds 25 - 1600 U/min swing diameter over bed slide 350 mm turning dia. in gap 785 mm quill travel 180 mm spindle bore 105,0 mm engine output 7,5 kW spindle taper DIN 55029 D 1-8 quill: 5 MK weight of the machine ca. 2.370 kg. range L-W-H 2.840 x 1.150 x 1.460 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Clamping disk 450 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - 2 centering points - Initial filling with Shell Tellus 46 - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Slip clutch - LED machine light - Change gears - Reduction sleeve - Chip back wall - Operating tool Csdpfx Aexaam Ija Nopw

Condition: used, Year of construction: 1999, functionality: fully functional, Absolutely trouble-free! Immediately ready for use! Transport possible! Strokes per minute: 65 spm Maximum strokes: 22 spm Clutch pressure: 4/5.5 bar Cpedpfx Aoyrt Uqea Now Maximum stopping time: 0.195 s Safety distance: 321 mm Energy output (nominal): 8493 kJ Min./Max. stroke: 10/130 mm Ram adjustment: 100 mm Maximum adjustment (PMI): 370 mm Max. extraction stroke: 55 mm Table dimensions (H x W x D): 68/660/950 mm Ram base dimensions (D x W x D): 450/540 mm Clutch diameter: 60 mm

Condition: good (used), Year of construction: 1981, Centre height 130 mm Swing diameter over bed 260 mm Swing diameter over cross slide 140 mm Distance between centres 600 mm Spindle bore 30 mm Bed width 255 mm Spindle mount DIN 55027 size 5 Speed range 35.5 - 3150 rpm Longitudinal feed range 0.04 – 0.4 mm/rev Cross feed range 0.02 – 0.2 mm/rev Metric threads 0.2 – 18 mm Imperial threads 2 – 76 tpi Module threads 0.4 – 13.5 module Diametral pitch threads 2.6 - 36 DP Tailstock quill taper MK 4 Drive power 3 kW Dimensions L x W x H 2140 x 850 x 1400 mm Weight 1,100 kg Accessories / Special Features: • 3-jaw wedge bar chuck FORKARDT F 160 with jaw safety, Ø 160 mm • Rapid tool change system “Multifix” size B • Coolant system with chip backsplash • Chuck guard • Hardened bedways • Machine lighting • Bed stop • Emergency stop switch Cpodpfx Aaexz Rfke Nsw New brake discs, new drive clutch, new V-belts, and new gearbox and V-belt bearings in 2026, cost €3,950.00 net. Option: New 3-axis digital readout K+C, fully installed €1,995.00 net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), functionality: fully functional, center height: 90 mm, spindle bore: 16 mm, spindle speed (max.): 2,150 rpm, spindle speed (min.): 25 rpm, overall weight: 350 kg, total height: 1,400 mm, total length: 1,100 mm, total width: 600 mm, 3-phase 380V motor is running flawlessly! Left & right-hand operation. Cpodpfx Aajyl S E Ie Nsw 14 spindle speeds with spindle clutch. Spindle RPM adjustable from 25 up to 2150. Back gear for stronger low-speed turning. Power cross feed. Norton gearbox for easy thread cutting. MT2 tailstock fitting. Distance between centers: 500mm Center height: 90mm Spindle bore: 16mm Dimensions: 110x60x140cm All accessories pictured in front of the lathe are included. Contact us for shipping options! € 2,150.00

Condition: new, thread dia. M3 - M16 metrisch 250 U/min. 0 6 - 8 bar working area max. 1100 mm weight 15 kg dimensions 700 x 280 x 250 mm Cjdpfx Aashiptgj Njpw Pneumatic tapping machine Type with an adjustable angle, horizontal tapping possible Pneumatic tapping machines for M3 - M16 threads, angle adjustable. 8 pcs. quick-change chuck with slipping clutch. Documentation in English! Optional: clamping table with grooves type: FL-WB

Condition: used, mileage: 316,423 km, power: 120 kW (163.15 HP), first registration: 05/2010, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, number of seats: 2, Year of construction: 2010, Equipment: ABS, central locking, electronic stability program (ESP), had accident, soot filter, + RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal number: #543 Mercedes Benz Sprinter 516 CDI 5.0t with Rockstroh Drain Jet 100-2 High-Pressure Flushing Unit Installation: Rockstroh Drain Jet 100-2 * PTO from Sprinter * Pratissoli KF3 high-pressure pump * Pressure control automatic * Pressure control and safety valve * 1st hydraulic HP hose reel for approx. 120m DN13 * 2nd hydraulic HP hose reel for approx. 80m DN19 * Filling hose reel with approx. 40m DN20 * approx. 1,000-litre water tank * Bypass control * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights * LED interior lighting * LED rotating beacons * Various storage options * Vice * Wooden floor with coating, side panels clad in aluminium chequer plate Special equipment: 13-pin trailer socket, 100 Ah battery, additional (reinforced) battery, digital tachograph, 180 A alternator, transmission lock for PTO, rear door (opening angle 270 degrees), PTO 2B with output shaft, parameterisable special module, radio pre-installation, spare wheel with road tyres, spare wheel holder under rear frame including jack, cab seats: comfort suspension seat, driver side, reinforced rear stabiliser, reinforced front stabiliser, sender for auxiliary heating, separation relay for additional battery, preparation for additional heat exchanger, provision for transmission oil cooling, booster heater Csdpfx Aaexc S Ato Nepw Additional features: 3rd brake light, adaptive brake light, driver airbag, washer fluid level indicator, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated indicator, brake assist, braking system with ABS+ASR, roof lining in cab, lockable glove compartment, body/superstructure: standard high roof panel van, child safety lock, fuel tank: main tank 75 Ltrs., continuous bulkhead, load securing/lashing points, headlamp range adjustment, engine 2.1 l - 120 kW CDI CAT, wheelbase 3,665 mm, smoker package, low emissions according to Euro 5 emissions standard, sliding right-side cargo/passenger door, seat cover/upholstery: Lima fabric, cab seats: adjustable passenger seat, Assyst maintenance interval display, heat-insulating glazing, permissible GVW 5.00 t, twin tyres on 2nd/rear axle For further detailed information and/or pictures, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Subject to alterations, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively subject to our Terms and Conditions and with exclusion of any warranty.

Condition: used, mileage: 157,414 km, power: 132 kW (179.47 HP), first registration: 06/2007, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 01/2026, color: white, gearing type: mechanical, emission class: euro4, number of seats: 3, total length: 8,040 mm, total width: 2,550 mm, total height: 2,920 mm, loading space length: 6,095 mm, loading space width: 2,489 mm, loading space height: 690 mm, Equipment: ABS, * MAN CD 24V radio * 'Base-Line' instrument cluster, km/h * Steering wheel adjustable in height and tilt * Driver’s seat static, adjustable in length, backrest, and height * Front passenger double bench for 2 persons (individual seats) * Headlight range adjustment * Halogen dual headlights H7 for right-hand traffic * Single-tone electric horn * MAN Tronic (on-board computer) ----* Engine D0834LFL54 – 180 HP / 132 kW EURO4 – 700 Nm C-R OBD+NOx sensor * Transmission ZF 6S-850 overdrive * Fuel tank 100 L right side, plastic * Front axle VOK-05, cranked * Front springs parabolic 4.0 t * Rear springs parabolic 5.6 t * Hydraulic steering * MAN BrakeMatic (electronic braking system) * Engine brake * Flamestart system * Anti-lock braking system (ABS) Codpfx Ajynrfyoa Nepw * Electronic speed limiter 85 km/h * Spray suppression ----* Clutch with 362 mm diameter * RINGFEDER 2040 G 145A trailer coupling * Disc brake on front axle * Disc brake on rear axle * Trailer socket for ABS at rear of frame * 24V 7+7 pin trailer socket at rear of frame * Electronic speed limiter 85 km/h * Spray suppression ----* Tire dimension FA: 235/75R17.5 * Tire dimension RA: 235/75R17.5 * Fuel tank: 100 liters * Permissible total weight: 7,490 kg * Curb weight: 4,765 kg * Overall length: 8,040 mm * Wheelbase: 4,200 mm ----Vehicle number: 11830----Errors and subject to prior sale----Advertising and various branding digitally removed.----We are happy to assist you with all formalities required when purchasing a vehicle. Just let us know your requirements and suggestions and we will take care of everything. Additionally, for an extra charge, we can offer the following services: ----Trade-in of your old vehicle TÜV/SP acceptance Complete export processing Financing arrangements Application for export license plates Vehicle transfer Vehicle registration Recovery and vehicle transport ----YOUR VTS TEAM

Condition: used, mileage: 351,445 km, power: 375 kW (509.86 HP), first registration: 07/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2023, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Cab: * GX cab: wide, long, extra high * Cab suspension: Comfort * Cab tilting mechanism: electric * Roof spoiler, electric glass sunroof, folding side flaps * Windshield: laminated safety glass, tinted * Sun visor in front of windshield * Windshield washer system * Central locking with remote control * 4 vehicle keys * Door extension driver and passenger side * Door windows: tinted, safety glass Infotainment: * MAN SmartSelect with touchpad Codpfxjynrfte Aa Njpw * MAN Media System Advanced Navigation 7 inch * MAN Advanced Sound System with subwoofer * Navigation map Europe and Russia * Online traffic for navigation function * RIO connectivity box * Smartphone integration Lighting and Signal Tones: * Headlights: LED * Daytime running lights: LED * Fog lights: LED * Cornering lights: LED * Side turn indicators: LED * Headlight cleaning system * High-beam assistant * Automatic lighting control with light sensor Seats: * Seat upholstery: textile, comfort * Driver comfort seat: air-sprung, with lumbar support and shoulder adjustment * Driver’s seat climate control * Passenger seat: unsprung, adjustable (longitudinal, backrest, and height) Sleeping Area: * Upper bunk: with slatted frame, fabric underlay, 70 mm mattress * Lower bunk: with slatted frame and head adjustment, comfort bed mattress 110 mm * Storage compartments and reading lights at both bunks Climate Control: * Electric stationary air conditioning * Air conditioning: Climatronic * Additional water heater: 4 kW Engine and Transmission: * MAN D2676 LF78 diesel engine, 375 kW (510 hp), 2,600 Nm torque, Euro 6d * Fuel filter: heated * Pre-fuel filter: with oil/water separator, heated * MAN TipMatic 14.27 DD, with retarder 35 * Drive programs: Efficiency up to 70,000 kg, Manoeuvre (shunting mode) * Single-plate clutch, 430 mm, dry Assistance Systems: * Electronic stability program (ESP) * Traction control (ASR) * ACC cruise control with Stop and Go * Emergency brake assist (EBA) * Lane return assist (LRA) * Lane change assist (LCS) and turn assist * MAN AttentionGuard attention warning Colours: * Chassis: graphite black RAL 9011 * Cab, aero package, high roof, fenders, bumper: signal blue RAL 5005 * HYVA 2-way hydraulic system Technical Data: * Total weight: 18,000 kg * Front axle: 7,500 kg * Rear axle: 13,000 kg * Gross combination weight: 40,000 kg (national), 44,000 kg (technical) * Main wheelbase: 3,600 mm * Rear frame overhang: 800 mm * Main frame longitudinal member thickness: 8 mm * Front axle tire size: 385/55 R22.5 * Rear axle tire size: 315/70 R22.5 * Fuel tank: 450 l * AdBlue tank: 75 l * TÜV & SP: expired Vehicle number/Vehicle: 7491 Subject to errors and prior sale. Advertising and various lettering have been digitally removed. We are happy to assist you with all formalities associated with purchasing a vehicle—just let us know your requirements and suggestions, and we will take care of the rest. Among other services, we can offer you the following for an additional charge: * Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Financing arrangements * Application for export license plates * Vehicle transfer/delivery * Vehicle registration * Breakdown/recovery and vehicle transport YOUR VTS TEAM

Condition: good (used), mileage: 384,913 km, first registration: 10/2010, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, Year of construction: 2010, Equipment: air conditioning, cruise control, electric window regulation, fog lights, power mirror, soot filter, = Additional options and equipment = - Aluminum fuel tank - EPS (Electronic Power Steering) - Particulate filter - Radio/CD player - Side door = Further information = Axle configuration Suspension: Air suspension Front axle: Steerable Rear axle 1: Lift axle Weights Unladen weight: 10,830 kg Payload: 15,170 kg Gross vehicle weight: 26,000 kg Functional Body brand: Gergen Condition Technical condition: good Visual condition: good Further information For more information, please contact Emad Al Shogran. Vehicle number: 15 Mercedes Benz Actros 2541 6X2 Gergen Hooklift/Steerable Axle VIN: WDB9302131L491649 German vehicle Inspection book TÜV (Roadworthiness): 07.2022 - Special Inspection: 01.2022 Suspension: Full air suspension Transmission: Automatic Air conditioning Engine brake Cruise control Steerable axle Euro 5 EEV Hooklift Gergen Year of manufacture: 2010 Cpsdpfx Aswv H Slja Now Special equipment: Emission standard EURO 5 EEV, trailer socket 15-pin 7+7-pin, work lights, audio system: CD radio, battery 220 Ah, battery drawer, front compressed air connection, aluminum air tank, additional air tank, air horn, electromagnetic viscous clutch for fan, cab: Movable cab entry, AdBlue tank: 95 liters, communication interface, fuel tank: 400 liters aluminum, air compressor 2-cylinder, 2-chamber heated air dryer, rear engine PTO for hydraulic pump, programmable special module, rear wall window, automatic fuse, cab seats: driver seat with comfort suspension, sun visor, cab socket 24V, Telligent steerable trailing axle, Fleetboard pre-equipment Additional features: Emission standard EURO 5, axle configuration: 6x2, trailer brake 2-line, towing hitch: tow coupling, towing hitch: G 150, trailer socket 24V / 15-pin, exterior mirrors electrically adjustable and heated, exterior wide-angle mirrors heated, left, outside temperature display, steel roof hatch, rear axle differential lock, cab: off-road suspension (6.0 Hz), cab: M (medium length), suspension: air/air (full air), alternator 80 A, rear axle H 6, crown wheel 440, chassis/body: chassis, model update from 06/2008, engine 12.0 liter – 300 kW V6 diesel (OM 501 LA), engine brake with constant throttle, single-tire trailing axle, pollen filter, wheelbase 4,500 mm, disc brakes, Telligent gearshift, Telligent braking system with ABS+ASR, front underrun protection, CB radio preparation, phone/fax preparation, cranked front axle, immobilizer, heat protection glazing, central locking including key, permissible gross weight 25.00 t = Company information = All information without guarantee! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email.

Condition: ready for operation (used), functionality: fully functional, spindle bore: 37 mm, spindle speed (max.): 1,000 rpm, spindle speed (min.): 45 rpm, overall weight: 650 kg, total height: 1,300 mm, total length: 1,700 mm, total width: 700 mm, 3 Phase 380V motor is running perfectly! Left & right rotation. Geared headstock, gears run in oil. 8 adjustable spindle speeds from 45 up to 1000 RPM. Spindle clutch allows speed changes while the motor is running. Metric lathe. Norton gearbox for easy thread cutting. Thread cutting dial indicator. Power feed in both longitudinal and cross directions. MT3 tailstock taper. Gap bed for machining larger diameters. Distance between centers: 600mm Center height: 170mm Cpedpfoylxlusx Aa Njw Spindle bore: 37mm Turning diameter in gap bed: 560mm Overall dimensions: 170x70x130cm Made in the UK. Includes all accessories as shown in the images at the front of the machine. Contact us for shipping options! € 3,250.00

Condition: used, mileage: 288,521 km, power: 280 kW (380.69 HP), first registration: 04/2006, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2026, color: silver, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), navigation system, parking heater, tail-lift, * Kenwood CD radio with Bluetooth * Bury hands-free kit + car phone holder * Multifunction steering wheel * Kingsman Grammer comfort leather seats with seat heating * Electric windows * Webasto auxiliary heater * Dometic camera system (body & reversing camera) with wireless function * CCI TranScan - 2 ADR telematics system with pressure unit * Semi-automatic transmission with clutch pedal * Cruise control ----* Sun visor * Additional headlights * Headlight cleaning system ----* Full air suspension * Trailer coupling * Tire pressure monitoring system * Rear axle differential lock * Steerable and liftable trailing axle * Snow chain system ----Living & sleeping area * 1 bunk bed (2 access points) * 1 driver's cab bunk bed, electrically operated * 2 sports seats (Kingsman Grammer), swiveling * Small seating area * Shelf system * Sink area * Ceramic hob * Waeco CoolMatic built-in refrigerator * Microwave * Thomson TV * Autosat 2 + DVB satellite system * Panasonic/Technics DVD home entertainment sound system ----* Shower * WC * Wash basin * Cabinet system ----Electrics & superstructure equipment * TelAir Hatz DieselEnergy 4004D diesel generator * MasterVolt converter system * Weaco Charge MCA 2415 * Truma Saphir Comfort IR ventilation system * Shurflo RV fresh water pump + Steadyflo compensation tank 0.7 l * Nautic Boiler BXS Square 25 ltr. * Webasto Air Top EVO 5500 * Ketterer CPC system control ----Horse area * Space for a total of 7 horses * Adjustable partition grids Cjdpfxeynd S Sj Aa Njpw * Camera system * Superstructure ventilation system * Side ramp * Rear loading ramp * Saddle compartment ----* Tire size front axle: 385/55R22.5 * Tire size rear axle: 315/60R22.5 * Technical total weight: 25,000 kg * Curb weight: 17,100 kg * Permissible trailer load: 18,000 kg * Overall length: 12,000 mm * Vehicle inspection due: 08/2025 ----Vehicle number: 11731----Errors and prior sale reserved----Advertising and various lettering have been digitally removed.----We are happy to assist you with all formalities associated with the purchase of a vehicle. Simply let us know your requests and suggestions, and we will take care of the rest. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicleTÜV/Vehicle inspectionComplete export processingFinancing arrangementsApplication for export license platesVehicle transferVehicle registrationRecoveries and vehicle transport----YOUR VTS TEAM

Condition: used, mileage: 47,971 km, power: 90 kW (122.37 HP), fuel type: diesel, gearing type: automatic, first registration: 03/2021, emission class: euro6, color: red, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Internal vehicle number: 94736A The vehicle is located at our site: Am Grün 1, 35066 Frankenberg (Eder) Equipment lines and packages * Basic equipment * Non-smoker package * Winter package Exterior * Silver sliding door strip cover * All-weather/ all-season tires 16" * Towbar (removable ball head) * Drive type: front-wheel drive * Washer fluid level indicator and enlarged reservoir * Exterior mirrors, electrically adjustable and heated * Exterior mirrors, black painted * Exterior mirrors painted black, exterior door handles body color, silver sliding door strip cover * Roof rails / roof rack preparation * Tinted laminated front windscreen * 2 folding remote keys * Rear wing doors with glazing * Standard taillights * Heated rear window * Rear window wiper * 5-door body * Metallic paintwork * Fog lights with integrated cornering light * Wheelbase 2755 mm * Full wheel covers / wheel trim * Spare wheel matching road tires (steel) * Heated washer nozzles * Sliding door left * Sliding door right * SCR system (AdBlue technology) * Fixed side window in rear left load/passenger compartment * Fixed side window in rear right load/passenger compartment * Fixed side window in front left load/passenger compartment * Fixed side window in front right load/passenger compartment * Steel rims 6.5x16 (black) * Exterior door handles body color * Privacy glazing at rear (74% tint) * Preparation for luggage compartment partition (net) Interior * 2nd row: bench seat, foldable, rollable, and removable * Storage compartments in roof console * Carpet flooring in rear * Carpet flooring in front * On-board tools and jack * Matte decorative inserts * Electric front windows * Luggage compartment cover/rollo * Front cup holders * Glove compartment with lid, illuminated * Dimming interior mirror * Steering column/steering wheel mechanically adjustable for height and reach * Rear reading lights (LED) * Seat upholstery: Fabric "Double Grid" * Heated front seats Cpodpfxeyqcayo Aa New * Height-adjustable front left seat * Sun visors with mirror * 12V socket in trunk/cargo area * Textile floor mats * Plastic door panels, armrest in fabric * Comfort trim in load/passenger compartment * Lashing points in luggage/cargo area Multimedia * Audio system Composition (USB, Bluetooth, color touchscreen display) * Bluetooth interface for mobile phones * Speakers (6) * Multifunction display “Plus” * Multimedia interface 2 x USB (Type C) front * Emergency call system * Digital radio reception (DAB+) Comfort and Environment * Automatic headlight activation (ALS) * Parking sensors front and rear * Driver assistance system: turn-off brake and evasive steering assist * Driver assistance system: trailer stabilization program * Driver assistance system: multi-collision brake * Driver assistance system: lane keeping assist (Lane Assist) * Driver assistance system: area monitoring system (Front Assist) with City Emergency Brake function * Front camera (multifunction camera in windscreen) * Cruise control system (including speed limiter) * 7-speed dual-clutch transmission DSG * Isofix mountings for child seats on rear seats (including i-Size child seats) * Leather multifunction steering wheel with paddle shift * Additional electric air heater * Driver drowsiness detection * Low-emission according to Euro 6d emissions standard * Intermittent wiper and light sensor * Electronic power steering

Condition: good (used), Spare parts suitable for a high-performance universal lead and feed screw lathe VOEST DA 210-2000 - Apron (clutch box) - Lead, feed, and shifting screw - End bearing block - Spindle support - Change gears - Rack bars Siegfried Volz Machine Tools Cpjdpfx Aaow Sfigs Nsw Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel