Used Co Rotate Extruder for sale (33,215)

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Bodpsvtpq Hjfx Al Ijdb Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos and our function video. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Year of construction: 2020, operating hours: 245 h, condition: good (used), functionality: fully functional, machine/vehicle number: QX20200111A551, Used - Pre insulated pipe decoiler. The decoiler could be used for other pipe types. Pipe coiler parameters: Installed power: 5.5 KW Voltage: 220V Current frequency: 50 Hz Compressed air: 6 Bar Total weight: 1700 kg Coil dimensions: Coil ID: 1600, 1700, 1800, 1900, 2000, 2100, 2200, 2300, 2400mm Coil OD: up to 3100mm Coil width: up to 1100mm Bdjdpfot Eatxox Al Isb Please call for more information

Condition: excellent (used), machine/vehicle number: LHS121885, REF: MM5854 1 x AEW Engineering Co Ltd stainless steel bandsaw with guide. Technical specification ⚙️ ✅ Model - 400 M. ✅ Type - MK 11. ✅ Serial number - LHS121885. Bdjdpjxqhadefx Al Ieb ✅ Electric supply - 415 V / 50 hz / 3 phase. ✅ Power - 5.5 Amps. *Please note - will be fitted with new blade*

Condition: new, Year of construction: 2026, Pressure blast cabinet for internal pipe blasting with turntable and manual blasting operation - Filter system - Turntable with prism for pipe support placement Bdedpfxoyn Inwo Al Isb - Driven internal pipe lance - Program storage: travel path, feed rate, blow-off function - External blasting nozzle with oscillation (option)

Condition: new, Year of construction: 2026, Pressure blasting cabin 4-axis controlled cleaning of moulds, steel rings, ingot moulds in the aluminum, tire mold, pressing tools, etc. The travel of the jets is freely programmable. 2 PCs automatic nozzle and 1 St. hand nozzle for cleaning the parts. HARDOX turntable and feed screw for long-lasting use of the blasting machine. Bedpsdrtanjfx Al Ijdb For questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: used, Thread cutting machine LORCH, SCHMIDT & Co Centre height: 200 mm Centre distance: 400 mm Spindle speed: 56 rpm Chuck diameter: 160 mm Tailstock quill travel: 45 mm Tailstock taper: MK2 Motor power: 0.25 HP Power supply: 380 Volt, 50 Hz - Right- and left-hand rotation - 3-jaw chuck - Spindle drive via geared motor - Without through spindle bore - Tailstock with lever quill - Drill chuck MAS 1 to 16 mm Required space (L x W x H): 1200 x 500 x 420 mm Weight: 80 kg Good condition Bedpfx Aloxf Uwxo Ijdb

Condition: new, Year of construction: 2026, Abrasive Conveyor Screw 5m with Dosing Hood For installation as a transverse screw conveyor to the bucket elevator at the end of the hall (pushing abrasive across the full hall width with a forklift) - 5m + outlet to bucket elevator, solid-blade screw Ø250mm with 5mm thick screw flights. - Can be used as an abrasive storage hopper. The blasting system draws abrasive as needed via a level probe. - Depending on installation depth, allows up to 24 hours of uninterrupted blasting without hall cleaning. - Hall cleaning takes only 10 minutes using a forklift or wheel loader. - Very low maintenance and repair costs compared to a complete conveyor floor. - Particularly suitable for very heavy workpieces. - Lower acquisition costs compared to a full-area conveyor floor. Bsdpfsynz Idex Al Ijdb - Reduced foundation costs compared to a full-area conveyor floor. - Can be pushed across the full hall width as opposed to a sweep pit. - Very high warranty period.

Condition: used, Year of construction: 1991, consisting of: -SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m2) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reduction station -Control cabinet with operating panel Additional title: juice heating plant for pasteurization Bodpfsvcqy Uox Al Isdb Capacity: 100 hl/h Perm. working overpressure: 16 bar test pressure 20,8 bar Wärmeaustauschfläche: 21 m2 Length: 5,6 m Width: 2 m Height: 2,4 m Operation / Control: Control cabinet with operating buttons Material: Stainless steel Base construction: Frame Features: 2 x vessels; plate heat exchanger; pipe heat exchanger; 2 x product pumps; process measuring and control technology. various valves and other fittings

Condition: good (used), High-intensity cold-light illumination system for macroscopic applications, lamps, luminaires, lighting, cold-light device, cold-light lamp -Manufacturer: Classen Co, cold light device cold light lamp type L 151 -Voltage: 220 V -Lamp: 15V/150W Bedoud Utvepfx Al Iedb -Hole for the optical fibers: Ø 15 mm -Dimensions: 260/165/H190 mm -Weight: 5.6 kg

Condition: used, Punch, pneumatic punch, punching machine, punching device, hole punching machine, pneumatic hand punch -Manufacturer: DE-STA-CO, pneumatic punch -Type: 040 0210 -built-in stamp: Ø 2.5 mm Bodpofwx Uyefx Al Ijdb -Max. Projection: 25 mm -Dimensions: 190/200/H510 mm -Weight: 24kg

Condition: good (used), pneumatic power clamps, horizontal clamps, compact clamps, clamping devices, pneumatic power clamps -Type: 82L32-143C8H0 -Quantity: 4 available -Price: per piece -Weight: 2.1 kg/piece Bjdjb A H E Iepfx Al Isdb

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -for: Harbs K2V folding machine -Max. Pressure: 70 bar -Motor: 0.75 kW 1400 rpm Bdjdpedwc I Isfx Al Ieb -Dimensions: 650/460/H600 mm -Weight: 60 kg

Condition: new, Year of construction: 2026, 200L mobile pressure-blasting vessel for construction sites or stationary use. Fittings are securely mounted under the handle. Very well suited for robust site applications. Comprising: - 200L pressure vessel - Pre-sieve - Weather protection lid - Water separator - Pressure regulator - Adjustable conveying air control (air quantity for vessel and blast hose) - Blast hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57m³/min) Bdodpfoynr E Tsx Al Isb - Abrasive metering valve, Y-piece rubber coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man's switch with control cable - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with bucket (Hobbock) and lid as an attachment for extended blasting without refilling - etc. Manufactured in Germany

Condition: new, Year of construction: 2026, Pressure blasting pot, 140L, mobile for construction site or stationary use. Fittings securely mounted under the handle. Very well suited for tough construction site applications. Includes: - 140L pressure vessel - Pre-filter - Weather protection cover - Water separator - Pressure regulator - Adjustment for conveying air (tank air volume and blast hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety features: - Dead man’s switch with control cable - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater Bsdpfx Aleynr E Ho Isdb - Transport frame with drum and lid as attachment for multi-hour blasting without refilling - etc. Made in Germany

Condition: new, Year of construction: 2026, Mobile 100L pressure blast pot for construction sites or stationary use. Fittings securely mounted beneath the handle. Ideally suited for demanding construction site applications. Comprises: - 100L pressure vessel - Pre-sieve - Weather protection cover - Water separator - Pressure regulator - Adjustable delivery air (air volume for vessel and blasting hose) Bdjdpfsynr Emjx Al Ijb - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx.: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man switch with control cable - Pneumatic quick venting control Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with container and lid as attachment for extended blasting without refilling - and more. Manufactured in Germany

Condition: used, Year of construction: 1984, Manufacturer : Brogli + CO AG Model: Multi-Homo 5 CI 2563 Type : Vacuum mixer Year: 1984 Bjdpjx R A Husfx Al Ijdb Materials in contact with product: stainless steel. Useful capacity: 5 L Total capacity: 6.8 L Jacket pressure: 1 bar Vessel pressure: vacuum / 0.5 bar

Condition: used, Year of construction: 2001, - Year of manufacture: 2001 Specifications Bodpfx Aexa Acljl Iedb - Cutting length: 3100 mm - Capacity: 16 mm - Stroke: 170 mm - Strokes per minute: 10 - Oil tank: 410 l - Motor power: 37 kW - Operating voltage: 400 V - Rated current: 72 A - Main fuse rated current: 100 A - Dimensions (W x H x D): 3750 x 2400 x 3425 mm - Weight: 13800 kg

Condition: used, Technical details: plate thickness: 1 mm distance between columns: 2,255 mm Bjdpfxowq I U Rs Al Iodb bending angle max.: 130 ° total power requirement: 2,25 kW Weight approx.: 1400 kg dimension machine xH: 2,7 x 1,15 x 1,3 m Machine without foot switch but this is pre-equipped the upper beam was converted to 60 mm adjustment by the previous owner higher is only possible when dismantling for automatic operation the foot control is missing manual operation O.K. No backgauge *

Condition: used, Year of construction: 2000, machine/vehicle number: P18096N, functionality: fully functional, pressing force: 20 t, stroke length: 160 mm, total height: 2,150 mm, overall weight: 180 kg, Good day, We hereby offer you, without obligation, a used workshop press from Rodcraft, model WP 20F. Manufacturer: Rodcraft Pneumatic Tools GmbH & Co. KG Model: WP 20 F Year of manufacture: 2000 Machine No.: P18096N Hydraulic stroke: 160 mm Pressing force: 20 t Machine dimensions: 2150 x 960 x 660 mm Transport dimensions: 2150 x 980 x 750 mm Machine weight: 180 kg Note: The above technical data has been taken from the manufacturer’s brochures or other sources, for which we cannot guarantee the accuracy or completeness. Bdedpfjygm N Dsx Al Iob Scope of delivery: 1 unit used workshop press Rodcraft, type WP 20F Application area and condition: The machine was occasionally used in an industrial metalworking shop for pressing out bearings, etc. The machine is fully functional and in good condition. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2015, operating hours: 20,331 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 33,000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baler manufactured by HSM, type VK 8818 R-FU, including conveyor technology and wire tying stations. The following technical data was taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Press force (main press): 1000 kN Specific pressing force: 120 N/cm² Shear edge ejector force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical output capacity: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Output at bulk density: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights (approx. 1.2 m bale length): 650 up to 750 kg per bale, material-dependent Hydraulic oil tank volume: 2000 L HVI 46 PLC control system: Siemens S7-300 Control panel: Siemens TP 700 Baler dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Space requirement (with conveyor): 35,000 x 8,480 x 7,745 mm (L x W x H) Baler weight: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional Optional Equipment Ordered: – Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard 2 x 45 kW drive, with same performance – Manual activation/deactivation of the number of wire bindings to save tying wire on non-expansive material – Shear edge ejector with 121 kN pressing force – Sensor-based wire monitoring, with baler shut-off in case of wire breakage or wire end – Bale chute – Optical warning signal, mounted on the control cabinet Condition of the Baler: The complete baling system (baler and conveyor technology) is in good, ready-to-use condition. The unit has been cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feeder belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: – HSM VK 8818 R-FU baler – Maintenance platform – Bale chute Bodpsyz Af Eofx Al Ijdb – Wire diverting stations – Wire spool trolleys (without wire spools) – Stadler KF 1800 chain belt conveyor – Transverse sliding belt conveyor – Pit cover from feed conveyor to pit – Second control cabinet to operate the baler from the conveyor – Machine documentation in English Delivery Time: The complete system has already been dismantled, placed into storage, and can be loaded at short notice following receipt of payment. We would be pleased if this or one of our other balers might be of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2026, Plastic squeeze dryers are a vital part of plastic film washing lines. Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Bdjdpjwg Sd Uofx Al Isb Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Year of construction: 2026, condition: new, functionality: fully functional, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Bjdpfswg R Rtex Al Isdb

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Bdjdpfx Ajwg Sgcol Ijb Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: excellent (used), Dough divider. Manufacturer - Friul Co srl. Type - M44/700. Portion weight - 300-650gram. Capacity - 70-400kg/h. Container capacity - 44liter. 230V, 50hz, 1300W, 6.5AMP. Dough rounder. Manufacturer - Friul. Bjdpfx Asv Szubel Ijdb Type - R10. 230V, 50hz, 370W, 2.4AMP. Elevator included. CLH.24

Condition: used, Year of construction: 2006, Card gluer Clever & Co Year: 2006 Hotmelt glue unit Nordson Description: - Suitable for: Kolbus KM 411 - Excl. universal bases Bjdpfx Aehd Nkdjl Isdb