Used Column Drill for sale (9,220)

Condition: good (used), - MK4 - Automatic feed - Variomatic Hsdexc N T Aopfx Addeng - Rotates clockwise and counterclockwise - Cooling - Machine vise - Lighting - 380V

Condition: good (used),

Condition: like new (used), Gillardon column drilling machine type GB 30 V, speed 60-1800 rpm, automatic feed, very good condition Hnodpfxexpxbcs Addjg

Condition: good (used), functionality: fully functional, throat depth: 250 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 300 rpm, drilling capacity: 18 mm, column diameter: 100 mm, stroke length: 100 mm, spindle mount: MK 2, overall weight: 180 kg, Good day, We hereby offer you, without obligation, a used column drilling machine SB 16 ST manufactured by Flott. Model: SB 16 ST Drilling capacity (steel, Ø): 18 mm Hnedjxtxgtepfx Addeg Spindle taper: MK 2 Drilling stroke: 100 mm Spindle outreach: 250 mm Column diameter: 100 mm Distance spindle / table, min. 140 mm, max. 790 mm Automatic feed: 0.10 / 0.16 / 0.25 mm/rev Speed range (rpm): 300 – 2800 rpm Connected load: 1.0 kW Machine weight: approx. 180 kg Note: The above technical data were taken from the operating manual, manufacturer’s brochures or other sources. We therefore cannot guarantee their accuracy or completeness. Scope of delivery: 1 used Flott SB 16 ST column drilling machine, without vise Application area and condition: The machine was sporadically used in a factory workshop for repair work and manufacturing spare parts for our own machinery fleet. The machine is fully functional and in good condition. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: new, Year of construction: 2025, Continuous/standard drilling capacity 15/18 mm (in E335/St60) 17 Nm Hedpfexgdn Aex Addong Tapping capacity M12 (pitch-dependent) Spindle taper MK II Drilling depth 70 mm Throat 220 mm Max. distance spindle/work surface: 750 mm Column diameter 70 mm Usable work surface W x L 300 x 250 mm T-slot size (arm), spacing (mm), width (mm) Number 2, 125, 14/26 Speed display: Digital Drilling depth display: Digital Drilling depth stop: adjustable stop ring Feed: manual Table height adjustment: hand crank/rack and pinion Motor, three-phase 230V with Quefren frequency inverter: 0.75 kW Spindle speed: 40–4,000 rpm Machine dimensions: 420 x 540 x 1,780 mm Weight: 88 kg Optional Accessories Drill package 3 consisting of: - Machine vice [felix] 2.0 100 mm - Quick-action drill chuck 3–16 mm (accuracy 0.17 mm) - Taper shank MK 2 B18 and reducing sleeve MK 2 to MK 1 €490.00 Factory warranty: 3 years Free delivery including packaging (within Germany only) NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT DISTRIBUTION PARTNER AND CAN OFFER YOU THE COMPLETE FLOTT PRODUCT RANGE! REQUEST A QUOTE!

Condition: ready for operation (used), functionality: fully functional, spindle mount: MK 3, total height: 1,800 mm, total width: 500 mm, total length: 600 mm, table width: 500 mm, table length: 355 mm, spindle speed (max.): 3,020 rpm, spindle speed (min.): 100 rpm, type of input current: three-phase, Equipment: type plate available, 3 Phase 380V, 2 speed motor is running fine! Geared head with 8 speeds. Spindle RPM adjustable from 100 up to 3020. MT3 spindle taper. Tool ejector. Maximum drilling depth: 130 mm Table size: 500x355 mm Head & table height adjustable. Good working condition! Made in Sweden. Overall dimensions: 60x50x180 cm Contact us for shipping possibilities! Hedpsxl Hpaefx Addsng € 1,850.00 EX VAT!

Condition: good (used), spindle speed (max.): 9,600 rpm, spindle speed (min.): 200 rpm, – MK3 – 200–9600 rpm – Right- and left-hand rotation – Thread cutting function – Throat depth 120 mm – Steplessly adjustable speed – Thread cutting function – Protective cover – Emergency stop switch – 40V Hnsdpexq Rwfsfx Addsg

Condition: good (used), Internal article no.: 24035 Column drilling machine Hsdpfx Ajtt Ahpjddong Solid TB15 2 speed settings Left-right rotation Spindle holder: MK2 Quill stroke: 100mm (with adjustable depth stop) Speed adjustable via belt. Speed levels unfortunately not visible. (Presumably up to 4000 rpm) Table: 320 x 260mm Dimensions (LxWxH): 60 x 40 x 170cm Weight: approx. 300Kg

Condition: used, Used pillar drilling machine from Ixion speed range 400-3000 rpm Mk2 holder drilling capacity up to max. 18mm Hnodpfx Adjhcr I Ejdog

Condition: excellent (used), For sale is an as-new Teknatool Nova Voyager DVR pillar drill equipped with a powerful 2 HP direct-drive motor. The machine is in excellent condition and has been reconditioned and inspected by our qualified staff. (Fully operational) Technical specifications: - Pillar drill with DVR drive Hsdpfoxzf H Asx Addeng - Speed range: 50 - 3,000 (5,500) rpm - Forward/reverse operation - Variable speed control - Height: 1,794 mm, Width: 448 mm, Depth: 578 mm - Spindle travel: 152 mm - Table size: 419 x 419 mm - Motor: 2 HP (230 Volt) - Keyed drill chuck 3 - 16 mm The machine is located at A-8561 Söding and can be inspected and collected during our business hours at any time. Subject to prior sale! Related terms: column drill, bench drill, drill press Reference: DT58003 SHIPPING NOT POSSIBLE!!!

Condition: used, Workbench Column Drilling Machine FLOTT type 16 STG/R2 Spindle: CM2 Spindle exit: 100 mm Spindle speed: from 80 to 2000 RPM Table size: Length 340 mm x Width 280 mm Maxi distance spindle nose/table (lower table): 400 mm Throat depth: 240 mm 2 speed motor 2,2 kW Drilling/tapping function Hodpfsxx Tncex Addong Adjustment by belt variator Electronic RPM speed not working Voltage: 380 V Width: 500 mm Depth800 mm Total height: 1100 mm Weight: approx 150 kg

Condition: new, Year of construction: 2022, functionality: fully functional, We are selling a pillar drill without quill feed. Technical data: - infinitely variable spindle speed (frequency converter with reduction gear) - Speed: from 65 rpm to 2000 rpm Hjdsvbbycspfx Addeng - Speed range I 65-540 rpm - II 245-2000 rpm - Taper in the spindle: MK 4 - Spindle diameter: 75 mm - Spindle stroke: 150 mm - Column diameter: 150 mm - Table size: 560x470 mm - 16 mm T-slots in the table - max. drilling diameter: 40 mm - Tapping capacity: M24 - Clamping surface base plate: 485x685 mm - Distance spindle - table: 850 mm - Distance spindle - base plate: 1180 mm - Main motor power: 1.5 kW - Weight: 340 kg - Dimensions: 670x580x2000 mm - Integrated coolant system - CE conformity

Condition: new, Infinitely variable pillar drill with fully-fledged tapping unit. Equipped with digital speed display as standard. Drilling table adjustable via rack and swivels around the column. Motor protection. Technical data: Drilling capacity: 40 mm Thread cutting: M 24 Spindle: MK 4 Drilling depth: 150 mm Spindle speeds, infinitely variable Hjdpfx Adjqfdywodeng Range A: 65 - 540 1/min Range B: 245 - 2000 1/min throat depth: 265 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Column diameter: 115 mm Table size: 560 x 470 mm / 14 mm Base plate size: 685 x 485 mm Dimensions, approx. (W x D x H): 580 x 950 x 2000 mm Connected load: 1.7 kVA Weight, approx.: 370 kg Equipment - Gearbox reduction gear - Large machine table - Digital speed display - Stepless speed adjustment - Thread cutting device - Table clamping and height adjustment from the front - Drilling depth stop - Overload protection Scope of delivery: - Coolant device - Two MK 3/2 reducing sleeves - LED machine light - Height-adjustable protective cover with micro limit switch - Operating instructions - CE/IEC conformity

Condition: ready for operation (used), functionality: fully functional, spindle mount: MK 3, total height: 1,900 mm, total width: 600 mm, total length: 900 mm, table width: 400 mm, table length: 550 mm, overall weight: 360 kg, spindle stroke: 150 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 160 rpm, input voltage: 380 V, Equipment: rotational speed infinitely variable, type plate available, 3-phase 380V, 2-speed motor is running fine. Stepless speed adjustment thanks to variomatic spindle drive. Spindle RPM adjustable from 160 up to 2800. MT3 spindle taper. Albrecht 1-13mm drill chuck included. Chuck eject tool included. Drilling depth adjustable. Maximum drilling depth: 150mm Table size: 550x400mm Table height adjustable. Weight: 360KG Overall dimensions: 90x60x190cm Made in Germany Overall good condition. Contact us for shipping possibilities! Hnjdpfx Adswy Ec Dsdjg € 2,350.00

Condition: good (used), FLOTT E-3 pillar drill throat 260 mm Hjdperic Tbsfx Addjng Bore 125 mm stroke Speed: 125 -2500 Clamping table diameter 420x340 mm Column diameter 110 mm Tool holder MK3

Condition: new, SHOWROOM MACHINE For sale is an as-new Teknatool Nova Voyager DVR 18" pillar drill with a 2 HP magnetic motor. Hnodpfx Adexu Dfkedsg The showroom machine is in its original condition, so you receive the full warranty. Technical data - Working area diameter: 18" = 457 mm - Distance spindle centre to column: 228.5 mm - Drilling depth: 152 mm (spindle travel) - Spindle taper: MT2 - Drill chuck clamping range: 1-16 mm - Forward/reverse rotation - Keyed drill chuck The machine is located in A-5431 Kuchl and can be inspected and collected at any time during our opening hours. Subject to prior sale!

Condition: used, Column Drilling Machine PRECIS Ø 23 mm Cone: CM2 Maxi diameter: Ø 23 mm Rotation: from 165 to 4400 RPM Hnjdpfoxx Tkwsx Addog Table size: 390 x 190 mm Spindle travel: 100 mm Column diameter: Ø 120 mm Throat depth: 240 mm 2 speed motor Mini chuck/table height: 100 mm Maxi chuck/table height: 350 mm Manual descent Manual hydraulic lifting of the table Voltage: 380 V Width: 700 mm Depth: 1000 mm Total height: 1800 mm Weight: approx 800 kg

Condition: new, Year of construction: 2025, Brush cutting device Drilling depth switch-off programmable Drilling depth and speed display - digital Thread cutting device M20 (depending on pitch) Infinitely variable speed from 125 - 4000 rpm in two stages, stage change via belt repositioning. Drilling capacity 25/30 mm Spindle MK 3 Hedpfx Adod H Rgfodsng Drilling depth 125 mm Thrust 280 mm Usable table surface (swivelling) 420 x 340 mm Feed 0-300 mm/min continuously variable Table height adjustment with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor three-phase 400 V pole-changing 0.9/ 1.45 kW Weight 300 kg OPTION: - Drilling package 5 consisting of: cone mandrel, drill chuck, vice and T-slot set (€ 790.00) - Spindle stop and chip breaking module (€ 855.00) DELIVERY: free delivery including packaging NOT THE RIGHT MACHINE? WE ARE FLOTT'S SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Drilling capacity max.: 30 mm Thread cutting: M 16 Tool rear ham: MK 3 Spindle speeds, infinitely variable: 150 - 2500 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale Hnsdpfx Adsd R Nv Isdog - Thread cutting device - CE / IEC, German Documentation and German Service Delivery: - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 - Coolant device - Digital speed display - Reducing sleeves MK 3/2, MK 3/1 - LED machine light - Height-adjustable protective cover

Condition: used, Year of construction: 1997, Workbench Column Drilling Machine CINCINNATI PE 32 Year of construction: 1997 Spindle: CM3 Spindle exit: 150 mm Spindle speed: from 100 to 3800 RPM Table travel X: 290 mm / Travel Y: 150 mm Speed variator by belt variator Hnedpfx Asxx Nyzsddeg Maxi height base/spindle nose: 500 mm Mini height base/spindle nose: 260 mm Throat depth: 300 mm Spindle sleeve diameter: Ø 80 mm Equipped with one cross table dimensions: L 430 x W 240 mm Voltage: 380 V Width: 900 mm Depth: 1100 mm Total height on base: 2000 mm Weight: approx 400 kg

Condition: new, Year of construction: 2025, Continuous/normal drilling capacity 18/20 mm Thread cutting capacity M12 (depending on pitch) Spindle MK II Drilling depth 100 mm Thread depth 240 mm Column diameter 82 mm Usable work surface W x L 340 x 280 mm T-slot size (arm), distance (mm), width dimension (mm) Number 2, 125, 13/26 Speed display: Digital Drilling depth display: Digital Drilling depth stop: quickly adjustable stop ring Manual drilling feed Table height adjustment with rack and pinion Motor three-phase - frequency-controlled, 230 V, 0.75 kW Spindle speeds continuously variable 30 - 3000 rpm Table work surface: 155 - 415 mm Foot work surface: 155 - 550 mm Machine dimensions: 355 x 705 x 1,825 Weight: 195 kg Accessories Optional Drill package 3 consisting of: - Machine vice [felix] 2.0 100 mm - Keyless drill chuck 3-16 mm (accuracy 0.17 mm), - Taper mandrel MK 2 B18 and reducing sleeve MK 2 to Mk 1 490.00 € D0Ezfi Hodpjvu Tmnjfx Addsng Factory guarantee: 3 years Free delivery including packaging (Germany only) Delivery time: immediately from stock NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: excellent (used), Year of construction: 1985, Column Drilling Machine ALZMETALL AX2 Cone: CM2 Spindle exit: 100 mm Rotation: from 200 to 500 RPM Table size: Length 370 mm x Width 350 mm Hnedpoxu H T Dsfx Addjg Year of construction: 1985 Maxi distance spindle nose/table: 480 mm Throat depth: 250 mm 2 R5247921 speeds motor Voltage: 380 V Width: 500 mm Depth: 900 mm Total height: 1700 mm Weight: approx 250 kg

Condition: good (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 5742, - Drilling capacity in St 60, 30 mm - Short spindle MK 3 - Spindle stroke 120 mm - throat depth 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm - Feed via turnstile - Weight 220 kg Hnodpfxeq U Swgs Addsg - Spindle speed 160 - 2250 rpm - Operating voltage 380 V-50Hz - Infinitely variable speed adjustment by means of adjustment lever - Motor speed in 2 stages, 700/1435 rpm - Tapping device with direction of rotation changeover after reaching the end stops - Coolant system completely installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - New precision machine vice (test winner)

Condition: new, Year of construction: 2025, Tapping device OLED display LED lighting Continuous/normal drilling capacity (mm) - R1 30/35 mm - R2 27/32 mm Tapping capacity max. - R1 M30x3.5 - R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Projection (mm) 300 Column diameter (mm) 140 Usable table surface (W x D) (mm) 590 x 450 Digital speed display Digital drilling depth display Drilling depth stop with fine adjustment Table height adjustment with toothed rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,200 mm Motor three-phase current 400V with frequency converter (kW) 4.0 Stepless spindle speeds R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Manual feed Weight (kg) 400 Optional drilling package 6 (€ 890.00 plus VAT) - Vice [felix] 2.0 150 - Taper mandrel MK IV/B18 - Reducing sleeve MK IV/MK II - Reducing sleeve MK IV/MK III - Quick-action drill chuck B18 3-16 mm (accuracy 0.17 mm) Free delivery in Germany including packaging! NOT THE RIGHT MACHINE? Hnedpfx Adjd Su Agodjg WE ALSO STOCK OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Condition: new, Year of construction: 2025, Thread cutting device Free-cutting device Programmable drilling depth cut-off Drilling depth and speed display - digital Thread cutting device M30 (pitch-dependent) Opt. R1: Stepless spindle speeds with countershaft, speed range 100-2000 rpm Opt. R2: Stepless spindle speeds with countershaft, speed range 70-1400 rpm Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm throat depth 300 mm Usable table surface (swiveling) 590 x 450 mm Feed rate 0-300 mm/min stepless Table height adjustment with toothed rack Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor rotary current 400 V pole-changing 1.5/3.0 kW Weight 420 kg Option drilling package no. 6: taper arbor B18/ Mk 4, quick-action drill chuck B18/ 3-16 mm, machine vice no. 2 -140 and T-slot screws, 890.00 EUR Option: automatic spindle stop with drill spindle top, 420,00 EUR Hsdpjd H Rh Rsfx Addong Option: chip breaking module 420,00 EUR Delivery: free domicile incl. packaging (Germany only) Warranty: 3 years NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT SUPPORT PARTNER