Used Compounding Extruder for sale (570)

Condition: used, This listing is for the Thermo Scientific Vanquish UHPLC Sytem The unit is in full working condition and is ready for immediate use Overview: Thermo Scientific Vanquish UHPLC Systems 1. Autosampler Purpose: Introduces the sample into the mobile phase stream automatically. Picks up sample from vials, plates, or tubes Injects with high precision (often nL to µL volume range 2.Pump Module Purpose: Delivers the mobile phase (solvent) through the system at high pressure. Binary pump: Mixes two solvents at high pressure. Ideal for fast gradients. Quaternary pump: Mixes up to four solvents at low pressure. More flexible, but slower gradients. Controls flow rate (e.g., 0.001–5.000 mL/min) Enables gradient elution (changing solvent composition over time 3.Detector Module (x2) Purpose: Detects and measures analytes as they elute from the column. Diode Array Detector (DAD/UV-Vis) – most common; detects UV-absorbing compounds Fluorescence Detector – for fluorescent compounds Charged Aerosol Detector (CAD) – universal detection for non-UV compounds Refractive Index Detector – for sugars, polymers MS (Mass Spectrometer) – advanced, highly sensitive detection Pgedpfxjxhfkzs Adiow Thermo Fisher’s Vanquish platform includes several variants tailored to different analytical needs—from routine HPLC to ultra-high-throughput and low-flow LC–MS workflows: Vanquish Flex UHPLC: Offers flexible HPLC/UHPLC method development and operates up to 1000 bar. It supports binary, quaternary, and dual pumps, plus intelligent tools like solvent monitoring and optional touchscreen interface. Vanquish Horizon UHPLC: Built for maximum performance, offering ultra-high pressure (up to 1500 bar), ultra-low gradient delay volume, biocompatible flow paths, and exceptional retention time stability and detector sensitivity. Vanquish Neo UHPLC: Designed for next-gen low-flow LC‑MS workflows (nano‑ to micro‑flow), delivering high‑sensitivity, high‑robustness separations. Vanquish Analytical Purification LC: Specialized for precise fractionation—high pressure (700–1500 bar), customizable flow (up to 10 mL/min), integrated fraction collector, multimodal detection, and advanced automation. Key Features Across the Platform Modular Design: Choose components (pumps, samplers, detectors, thermostatting units) to configure a tailored system. Most models offer biocompatible flow paths and Viper fingertight fittings for low dead‑volume, tool‑free setup. Temperature Control: High-performance column compartments with active/passive heating, pre‑heating, and post‑column cooling to manage frictional heating and improve reproducibility. Detection Options: Available detectors include Diode Array (with LightPipe optics for superb sensitivity), Charged Aerosol Detector (CAD) for near‑universal detection, fluorescence, multi‑wavelength, refractive index, and mass spectrometry detection. Software Integration: Fully compatible with Chromeleon CDS (with SII for streamlined MS integration), plus Xcalibur and TraceFinder for LC‑MS workflows. MS Integration: Vanquish systems interface seamlessly with Thermo MS platforms—Triple Quadrupole and Orbitrap—for sensitive, accurate mass analysis. Operational ROI: Thermo highlights reduced unplanned repairs, improved productivity, and net-zero ambitions through renewable-powered manufacturing.

Condition: new, Year of construction: 2023, The ALTENDORF F 25 offers everything that a sliding table saw a sliding table saw must be able to do. Whether in your first own workshop, for daily use, in industrial production or as a or as a powerful second machine. The F 25 is the space-saving all-rounder that simply makes you makes you more productive. Materials such as wood panel materials, solid wood, wood-like materials or extruded profiles can be easily processed thanks to optimum precision outstanding cutting quality. The one-sided swivel saw blade also enables angle cuts. The smooth-running double roller carriage, based on the Altendorf system, as well as the digital display of height and height and tilt are standard features. A machine for beginners and professionals alike. Double roller carriage, 3200 mm swiveling, man. Height and swivel adjustment, parallel stop with man. Fine adjustment, angle mitre fence, large extraction hood, PSV ----- Technical data ----- Swivel range: 0 - 46 °, carriage length: 3,200 mm, Rip fence: 1,000 mm with Digit X Cutting height: 100 mm, max. saw blade Ø: 315 mm, max. saw blade projection: 104 mm, Crosscut fence extendable up to: 3,450 mm, speeds: 3,600 / 4,200 rpm, Motor power: 5.5 kW, 7.5 HP, work table height: 880 mm Type: F 25 Version 5 5.5 KW (7.5 HP) 2 speeds Rip fence Digit X, 1000 mm Large extraction hood PSV Without scoring unit, prepared for retrofitting a scoring unit installation of a scoring unit Pgodpfxsqvn Rue Adiew Special price ex stock 54634 Bitburg - available immediately -

Condition: excellent (used), 3D systems Type: DT60 Print volume 600 x 450 x 450 mm Outer dimensions 1265 x 780 x 1725 mm Precision in Z axis: 1.25 micron Precision in X and Y axis: 7.5 microns Max. Extruder temperature 500 ºC Max. Installation space temperature 120 ºC Die diameter 0.6 mm Other available Die diameter 0.2 / 0.4 / 0.8 / 1 / 1.2 mm Thermal barrier made of titanium Two independent extruders Heated filament feed 4 print modes : SINGLE, DUAL, TWIN, REFLEX 220 - 240 V, 50-60 Hz Maximum consumption 3 kW/h Pgedpfx Adennzyqeijw 7" LCD touch screen Remote monitoring Industry 4.0 capable: WiFi, Ethernet, HotSpot, USB MMS System - Modular Maintenance System Double filament loading Automatic filament change Heated feeder Jam detection Sensor for detecting end of filament Print recovery system Liquid cooling Double tempered glass Base fixed by vacuum High printing speed Positioning controlled via encoder Condition: used Scope of delivery: (See pictures) (Sale ex location!) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2015, condition: used, max. dia. of grinding wheel 150 mm turning speeds 2850 U/min total power requirement 0,45 kW dimensions 465 x 316 x 302 mm weight 10,7 kg Pgodpfx Adowp S U Eoiew NEW PRICE: ~ 200.00 EURO Description - Double grinding machines from OPTIMUM - a quality product for trade and industry - Heavy-duty, durable industrial design with maintenance-free motor for continuous use - Extruded aluminum housing - Long service life and smooth running thanks to balanced rotor with high-quality ball bearings - Spark guard on each grinding wheel reduces flying sparks - Stable, adjustable workpiece support - Viewing windows made of shatterproof material - Vibration-damping rubber feet - Two universal corundum grinding wheels

Year of construction: 1992, condition: used, Volume: 1000 l Manufacturer : De lama Model: DLST/L Class 100 Year : 1992 Type: Dry heat oven for sterilisation and depyrogenation.   Volume: 1 m3 Materials : Polished stainless steel – Sterilisation (160 – 180°C): Reduction of micro-organisms and their by-products by up to 12 log – Depyrogenation (220-250°C): Destruction of pyrogens and endotoxins inside materials – Horizontal laminar flow – Double door (new) – Electric heating – 2 trolleys – Olympia/EXP3: Control, regulation, management and recording system with high-speed processor. Possibility of designing the oven to withstand operating temperatures of up to 300°C in continuous service, thanks to the use of HEPA filters with a special sealant. Main applications : – empty glassware (e.g. vials, ampoules, bottles) – stainless steel equipment (e.g. trays, machine parts) – moisture-sensitive materials Pgsdpoxxcw Tefx Adijw – basic thermostable pharmaceutical products and chemical compounds – non-aqueous liquids (e.g. oils, glycerines, etc.)

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2025, NEW NEW Cremekocher CK 80 NEW NEW Efficient operation for cooking and heating creams and compounds Precise temperature control Digital timer, 2 speeds Kettle capacity: 80 liters Batch size: 4 to 50 liters Stainless steel construction Handwheel for emptying Mobile machine with locking device DGUV V3 safety tested - only with us Connection: 400V, 32A CEE plug Dimensions: 960 x 780 x 1630 mm (W x D x H) Weight: 165 kg NEW machine, SAB tested With warranty + spare parts service Options: Pgedev H Ti Hjpfx Adiow Leasing & rental service Touch-panel LCD Outlet valve DN50 More powerful heating Maintenance contract Delivery service Service package Instruction & commissioning We offer a TOP selection of bakery machines!

Condition: used, This listing is for the GE Analytical Sievers 500 RL On-Line TOC Analyzer The unit is in full working condition and is ready for immediate use The GE Sievers 500 RL On-Line TOC Analyzer is a reagentless analyzer designed for continuous monitoring of organics in ultrapure water for pharmaceutical, microelectronics, and power applications. It delivers real-time, high-accuracy monitoring of Total Organic Carbon (TOC) using proprietary membrane conductometric technology—without the need for chemical reagents. This makes it ideal for environments requiring stringent water purity and compliance with global standards. Key Features Reagentless Operation: Utilizes Sievers' unique membrane conductometric technology to measure CO₂ produced from oxidized organics, eliminating interference from acids, halogenated compounds, and bases. Wide TOC Measurement Range: 0.03 to 2,500 ppb with ±5% accuracy and ±1% precision. Pgedjxv Dhhopfx Adiow Automated Compliance: Features the Super iOS (Integrated On-Line Sampler) to automate system suitability, calibration, and verification. Global Regulatory Compliance: Meets or exceeds USP , EP 2.2.44, JP16 2.59, and other international standards for purified and injectable water. 21 CFR Part 11 Support: Enables secure data handling and compliance with electronic record regulations using Sievers DataShare 500 software. Long-Term Calibration Stability: Typically remains stable for up to 12 Analytical

Condition: excellent (used), Extruder for 3D Printing Filament Production – 25/25 L/D We offer a high-quality extruder for the production of 3D printing filament. The system is designed for continuous industrial operation and is characterized by its robust construction, precise temperature control, and excellent material homogenization. Ideal for manufacturers, material developers, and research institutes. Technical Equipment & Features • Extruder 25/25 L/D – efficiently designed screw geometry for uniform melt quality • High-performance melting zone – precise temperature regulation for consistent filament quality • Die for 3D filament extrusion – suitable for all standard filament diameters • Cooling bath – stable filament take-off and optimized cooling section • Haul-off unit – finely adjustable pulling speed for exact diameter stability • Winding and spooling device – automatic filament winding • Optimally suited for PLA, PETG, ABS, TPU, and many technical materials Podpjxwvqqsfx Adijgw

Condition: excellent (used), Objet Stratasys Model: Objet260 Connex 2 Stratasys Objet260 Connex 2 3D Printer + Cleaning Glovebox Computer, Monitor, Software: Objet Studio Ver. 9.2.11.6825 The Objet260 Connex 3D printers from Stratasys are based on PolyJet technology and allow you to combine two or three base resins in a single print run, allowing you to create prototypes from three materials, as well as simulate overmolding or populate build plates with selected models. Pedpov Rw Etjfx Adiogw Using triple-jetting technology, the Objet260 Connex creates prototypes with up to 27 material properties simultaneously in a single part. The device enables high-resolution 16-micron layers for printing complex geometries, smooth surfaces, and thin walls. Model Materials: Solid and opaque (VeroWhitePlus, VeroBlackPlus, VeroGray, and VeroBlue) Rubber (Tango family) Transparent (RGD720 and VeroClear) Simulated polypropylene (Endur and Durus) Biocompatible (MED610) Heat-resistant (RGD525) Digital Materials: Digital ABS and Digital ABS2 Wide range of light transmission values Rubber compounds with a range of Shore A hardnesses Simulated polypropylene materials with improved heat resistance Applications: Visual prototypes Functional prototypes Equipment and devices Architectural models Medical models Injection molds Concept models Technical specifications: Build volume: 255 × 252 × 200 mm Layer thickness: Horizontal layers of only 16 µm Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Accuracy: 20 to 85 µm for components smaller than 50 mm; up to 200 µm for the full model size (only for solid materials, depending on geometry, design parameters, and model orientation) Size and weight: 870 × 735 × 1200 mm; 410 kg AC connection: 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 200–240 VAC, 50–60 Hz, 7 A, single-phase Condition: used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2020, condition: excellent (used), LICHTER LRK 400 PVC PIPE HEAD FOAM CORE PIPE HEAD-THREE LAYER Application: PVC FOAM CORE PIPES KG-U PVC pipes Accessories: Tools for the production of pipes in diameters 250 mm, 315 mm and 400 mm The pipe head was in operation for about 1 year, due to business closure. Condition not new but in very good condition Location: Sachal EXTRUSION MACHINES Psdpfewqgitsx Adijgw D-26345 Bockhorn-Grabstede, Bahnhofstraße 6 Germany

Condition: used, functionality: fully functional, mileage: 489,734 km, power: 338 kW (459.55 HP), first registration: 05/2022, fuel type: diesel, overall weight: 8,441 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise: I-See Predictive Cruise Control - Map based topography information Cab: Globetrotter XL Battery system type: Single energy battery system (2 batteries) Engine & Turbo Package: D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR Gearbox: I-shift Automated 12-speed - GCW 60 tonne Automatic transmission manual shift options: Standard transmission shift - I-Shift or Powertronic Engine Brake Type: Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver comfort Cab Climate Unit: Electrically controlled air conditioning with sun sensor Driver Seat: Comfort 4: suspended - belt in seat Passenger seat: Comfort 4: suspended - belt in seat Top bunk: Height adjustable foldable top bunk 700 x 1900mm Lower bunk: Lower bunk 815mm wide in the centre Aux. cab heater: 1.8kW Air to air Refrigerator: 33 litre under bunk mounted fridge / freezer with dividers Driver attention support Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Tyre Size: 315/60R22.5 Drive Axle Tyre Size: 315/60R22.5 Fifth Wheel Type: SAF-Holland/+GF+ SK-S 36.20 cast fixed fifth wheel Wheelbase: 3800 mm Drive Axle Ratio: 2.17:1 Fuel tank - RHS: 570litre aluminium diameter 710mm Fuel tank - LHS: 900 LITRE, LEFT SIDE FUEL TANK WITH STEPS Plastic AdBlue Tank: 65 litre under/behind cab Psdpfx Ajxtvl Hjdiogw Cruise Control: Eco fleet software - with speed 85, I-See and push button I-shift Technology Secondary Information Display: Secondary colour information display FMS gateway: FMS gateway for Fleet Management System Exterior Headlamps: LED headlamps Daytime Running Lights: V-shaped Front fog lamps: Front fog lights - white Cornering lights: Static corner lights - works with indicator at low speed to light up direction Air Deflector - Roof: Roof air deflector Side air deflector: Cab side air deflector - long tractor

Condition: used, Heavy Duty Lathe SN1250X10000 as follows: Manufacturer: 1MAI PLOIESTI (Romania) Year of manufacture: 1986 Podpfx Adexx Irieisgw Main technical data: • Face plate diameter: 1250 mm • Max. swing over bed: 1250 mm • Max. swing over carriage: 970 mm • Centre height: 625 mm • Distance between centres: 10,000 mm • Max. workpiece weight: 16 t • Main spindle speed range: 0.8 – 160 rpm • Main drive motor: 75 kW • Longitudinal feed: 0.4 – 480 mm/min • Cross feed: 0.2 – 240 mm/min • Compound feed: 0.15 – 180 mm/min • Compound travel: 500 mm • Cross slide travel: 520 mm • Tool post travel: 175 mm • Machine weight: approx. 29,000 kg Accessories: - 4-jaw face plate - 5 steady rests

Condition: used, This listing is introducing 8 No Envair Mobile Isolators of different specifications currently held in our stock Pedpfexv Dhbex Adiegw The units are in full working condition and ready for immediate use Envair Mobile Isolator Envair Technology is a UK-based manufacturer specializing in clean air and containment solutions for the healthcare, biotechnology, and pharmaceutical industries. Their product range includes a variety of isolators designed to provide controlled environments for handling hazardous substances, ensuring both operator and product safety. Applications Envair isolators are widely used in a variety of applications including Hospital Pharmacies: For preparation of TPN, CIVAS, and aseptic dispensing. Pharmaceutical Laboratories: Handling of HPAPIs and sterile compounding. Sterility Testing: Secure, controlled environments for product testing. R&D Facilities: Safe containment during experimental or early-stage developmen Key Features of Envair Isolators Positive and Negative Pressure Models: Envair offers both positive pressure isolators protect the product from contamination and negative pressure isolators to protect the operator from hazardous substances Compliance with GMP Standards: Many Envair isolators meet EU GMP Grade A and ISO 5 classifications, ensuring sterile, controlled environments. Customizable Designs: Envair provides bespoke solutions tailored to specific client needs, including unique dimensions and technical requirements. Advanced Containment Technology: Isolators are equipped with automated pressure decay leak tests, electromagnetic interlocks for transfer chambers, and integrated decontamination systems. User-Friendly Controls: Most units include intuitive touchscreen interfaces and PLC-based systems for simple and efficient operation. Growing Need for Containment with HPAPIs Demand for personalised medicines containing High Potent Active Pharmaceutical Ingredients (HPAPIs)—particularly in newer super-potent oncology, cardiovascular, and diabetes treatments—is increasing rapidly. These medicines often require shorter turnaround times, forcing pharmaceutical process manufacturers to develop faster, more agile workflows. In such high-risk, high-value settings, a GMP-compliant environment is not optional—it’s critical. It’s easy to overlook the fact that the people developing, manufacturing, and dispensing these complex drugs are at risk of exposure to harmful, sometimes lethal, compounds. Their safety is paramount, given the essential role they play in maintaining a reliable supply of advanced therapeutics. Expertise in HPAPI Handling for CMOs & CDMOs Envair has specialist expertise in helping Contract Manufacturing Organisations (CMOs) and Contract Development and Manufacturing Organisations (CDMOs) safely handle HPAPIs—even within existing non-contained facilities. Their isolator systems are designed, manufactured, and installed to meet rigorous containment performance levels below 1μg/m³ (OEB 5). Each system is custom-engineered for the specific site and process step—whether it’s weighing, mixing, milling, spray drying, or packaging. Applications Hospital Pharmacies: For preparation of TPN, CIVAS, and aseptic dispensing. Pharmaceutical Laboratories: Handling of HPAPIs and sterile compounding. Sterility Testing: Secure, controlled environments for product testing. R&D Facilities: Safe containment during experimental or early-stage development

Condition: like new (used), Year of construction: 2020, Markforged Type: X7 Gen 2 3D printer The X7 prints industrial-grade manufacturing fixtures, jaws, tooling, jigs and end-use parts.  Designed for use in production, it prints parts that are stronger than machined aluminum,  at a fraction of the cost.  It combines the best surface quality, build size and reliability.  Speed up production with Turbo Print and verify dimensional accuracy with Blacksmith adaptive manufacturing technology, available only on the X7. Technical specifications: Printer features Process: Fused filament fabrication, continuous fiber reinforcement Build volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Weight: 48 kg (106 lbs) Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Print bed: Kinematic coupling - level to within 80 μm Laser: In-process control, active print calibration, bed leveling Extrusion system: 2nd generation extruder, out-of-plastic and out-of-fiber detection Pgjdpfx Aovvlduodiow Power supply: 100-240 VAC, 150 W (2 A peak) RF module: Frequency range 2.4 GHz Wi-Fi standards 802.11 b/g/n Materials Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Available Fibers: Carbon fiber, Carbon fiber FR, Glass fiber, Aramid fiber (Kevlar®), HSHT glass fiber Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 aluminum) * Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 aluminum) * Part properties Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Filling: closed cell filling: multiple geometries available Software Eiger Cloud: Slicing, parts and build job management (other options at additional cost) Security: 2-factor authentication, Org Admin access, single sign-on Blacksmith: Adaptive manufacturing platform (additional purchase required) Year of manufacture: 2020 last maintenance in December 2024 On sale from Location Condition: used Scope of delivery: (see pictures) one roll each of Kevlar, fiberglass and carbon fiber, 11 started remaining filament rolls of Onyx (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, functionality: fully functional, mileage: 417,524 km, power: 338 kW (459.55 HP), first registration: 05/2022, fuel type: diesel, overall weight: 8,441 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise: I-See Predictive Cruise Control - Map based topography information Cab: Globetrotter XL Battery system type: Single energy battery system (2 batteries) Engine & Turbo Package: D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR Gearbox: I-shift Automated 12-speed - GCW 60 tonne Automatic transmission manual shift options: Standard transmission shift - I-Shift or Powertronic Engine Brake Type: Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver comfort Cab Climate Unit: Electrically controlled air conditioning with sun sensor Driver Seat: Comfort 4: suspended - belt in seat Passenger seat: Comfort 4: suspended - belt in seat Top bunk: Height adjustable foldable top bunk 700 x 1900mm Lower bunk: Lower bunk 815mm wide in the centre Aux. cab heater: 1.8kW Air to air Podpfxextvlts Adisgw Refrigerator: 33 litre under bunk mounted fridge / freezer with dividers Driver attention support Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Tyre Size: 315/60R22.5 Drive Axle Tyre Size: 315/60R22.5 Fifth Wheel Type: SAF-Holland/+GF+ SK-S 36.20 cast fixed fifth wheel Wheelbase: 3800 mm Drive Axle Ratio: 2.17:1 Fuel tank - RHS: 570litre aluminium diameter 710mm Fuel tank - LHS: 900 LITRE, LEFT SIDE FUEL TANK WITH STEPS Plastic AdBlue Tank: 65 litre under/behind cab Cruise Control: Eco fleet software - with speed 85, I-See and push button I-shift Technology Secondary Information Display: Secondary colour information display FMS gateway: FMS gateway for Fleet Management System Exterior Headlamps: LED headlamps Daytime Running Lights: V-shaped Front fog lamps: Front fog lights - white Cornering lights: Static corner lights - works with indicator at low speed to light up direction Air Deflector - Roof: Roof air deflector Side air deflector: Cab side air deflector - long tractor

Condition: used, This listing is for a nonoperational Eppendorf Mixmate 5353 Mixer. This unit is supplied nonoperational and is ready for immediate release. Podpfxoxv A Tce Adijgw The Eppendorf MixMate 5353 is an advanced lab mixer designed for optimal precision and efficiency when handling small sample volumes, making it an essential tool for various applications in research and clinical settings. Key Features: Versatile Format Compatibility: The MixMate can accommodate a wide range of tube and plate formats, including 96 and 384 well plates, as well as 0.2ml PCR tubes, 0.5ml, 1.5ml, and 2.0ml tubes. Integrated Vortexing Action: Its unique vortexing action is perfect for applications such as resuspending bacterial pellets, DNA samples, cell cultures, conducting immunoassays, and performing solubility tests. For instance, it can quickly re-suspend DNA pellets after ethanol precipitation, ensuring thorough mixing without sample loss. Speed and Flexibility: Mixing Frequency: Ranges from 300 to 3,000 RPM in 50 RPM increments. Touch Vortexing Frequency: Reaches up to 3,500 RPM for rapid, on-demand mixing. 2D Mix Action: The innovative 2D mixing action ensures uniform mixing across all wells, which is critical for experiments requiring consistent sample homogeneity, such as high-throughput screening assays. Adjustable Mixing Time: Users can set mixing times between 15 seconds and 99.5 hours or choose continuous operation, providing flexibility for both quick mixing tasks and longer protocols. Programmable Features: The user-friendly digital control panel can store up to 5 predefined programs, allowing for quick access to frequently used mixing parameters. Specifications: Plate Dimensions: Accommodates plates sized 5 x 3 inches. Power Requirements: Operates on 115 – 230V; 50-60 Hz. Dimensions: Compact size of 9 x 7 x 7 inches. Weight: Weighs 10 lbs, making it portable yet sturdy. Applications: The Eppendorf MixMate 5353 is ideal for: Molecular Biology: Resuspending nucleic acid samples and cell cultures. Immunology: Preparing samples for immunoassays with consistent mixing. Pharmacology: Conducting solubility tests for drug compounds in different solvents.

Condition: good (used), 3DGENCE Type: Industry F420 Year of manufacture 2021 Technical data: Working space: 380 × 380 × 420 mm (60 648 cm³) External dimensions (WxDxH): 900mm x 950mm x 1950mm Printing system: double extruder equipped with cleaning system Diameter of the filament: 1.75 mm Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: soluble support material ESM-10, HIPS Filament chamber: 4 places for the filament with automatic exchange system Pgedpfx Adjt I Dm Ijiow Temperature of the print head (max.): 500°C Temperature of the print bed (max.): 180°C Temperature of the working chamber (max.): 180°C (active heating) Temperature of the filament chamber (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone. Written orders can be placed by email or fax

Condition: used, functionality: fully functional, mileage: 465,114 km, power: 338 kW (459.55 HP), first registration: 05/2022, fuel type: diesel, overall weight: 8,441 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise: I-See Predictive Cruise Control - Map based topography information Cab: Globetrotter XL Battery system type: Single energy battery system (2 batteries) Engine & Turbo Package: D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR Gearbox: I-shift Automated 12-speed - GCW 60 tonne Automatic transmission manual shift options: Standard transmission shift - I-Shift or Powertronic Podpfxextvlmo Adiogw Engine Brake Type: Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver comfort Cab Climate Unit: Electrically controlled air conditioning with sun sensor Driver Seat: Comfort 4: suspended - belt in seat Passenger seat: Comfort 4: suspended - belt in seat Top bunk: Height adjustable foldable top bunk 700 x 1900mm Lower bunk: Lower bunk 815mm wide in the centre Aux. cab heater: 1.8kW Air to air Refrigerator: 33 litre under bunk mounted fridge / freezer with dividers Driver attention support Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Tyre Size: 315/60R22.5 Drive Axle Tyre Size: 315/60R22.5 Fifth Wheel Type: SAF-Holland/+GF+ SK-S 36.20 cast fixed fifth wheel Wheelbase: 3800 mm Drive Axle Ratio: 2.17:1 Fuel tank - RHS: 570litre aluminium diameter 710mm Fuel tank - LHS: 900 LITRE, LEFT SIDE FUEL TANK WITH STEPS Plastic AdBlue Tank: 65 litre under/behind cab Cruise Control: Eco fleet software - with speed 85, I-See and push button I-shift Technology Secondary Information Display: Secondary colour information display FMS gateway: FMS gateway for Fleet Management System Exterior Headlamps: LED headlamps Daytime Running Lights: V-shaped Front fog lamps: Front fog lights - white Cornering lights: Static corner lights - works with indicator at low speed to light up direction Air Deflector - Roof: Roof air deflector Side air deflector: Cab side air deflector - long tractor

Condition: used, This listing is for a Hirschman Pipetus 100 Rechargeable Pipette Controller The unit is in full working condition and is ready for immediate release For all pipetting from 0.1 ml to 200 ml Key Features: Wide Volume Range: Compatible with all measuring, volumetric, and Pasteur pipettes from 0.1 ml to 200 ml Precision Dispensing: Fine dispensing valves with ceramic compound valve pins offer maximum chemical resistance and zero wear Adjustable Speeds: Five finely tuned performance stages allow for exact and continuously variable pumping and suction speeds for both filling and venting Ergonomic Design: Crafted for non-fatiguing, long-term use Low Noise Operation: Pump motor operates quietly and without vibration Clear Display: Integrated color display shows pipetting mode, speed level, and battery status Advanced Charging System: Pgedpsxv Ax Ssfx Adisw NiMH rechargeable battery Inductive, contact-free charging Microprocessor-controlled charge cycle Included Accessories: Inductive charging and park station Standard wall bracket Reliable Sealing: Tight silicone adapter seals all pipettes securely PTFE Filter Protection: Built-in hydrophobic PTFE diaphragm filter (0.2 µm pore size) prevents contamination.

Condition: used, dr. wiesner Type: INTEGRA DDV -1...1 bar Product description: dr. wiesner Integra leak test system The classic - for all common test procedures The leak test system for industrial leak-tightness and flow tests with fully graphical color display up to three independent test circuits operable 255 test programs can be stored automatic process optimization autoTune (option) communication via flexibly exchangeable bus coupling modules freely programmable fixture control freely programmable special test procedures The device is suitable for tests according to the relative and differential pressure method with overpressure. Special versions: none Technical data: Electrical supply: 110 ... 230V~; 50 ... 60Hz (connection via power cable to plug XO) pneumatic: clean and dry compressed air max. 7 bar (to connection P) Test pressure range: 0 ... 1000 mbar, electronically regulated Measuring ranges Relative pressure: 0 ... 1000 mbar Differential pressure: +20 mbar Resolution: 0.1 Pa Internal volume: 13 cm³ test circuit Pgsdpfx Aowqm Ddedisw 15.0 cm³ reference circuit Electrical interfaces: 3x serial RS232 (COM1; COM2; COM3) 1x digital I/O (X1) pneumatic: Connection test object (Test) Connection reference circuit (Ref.) Enclosure Protection class: IP40 Dimensions: 450x185x380mm (WxHxD) Weight approx. 15.5kg Condition: used (Changes and errors in the technical data, information reserved!) We are happy to answer further questions by phone.

Condition: used, functionality: fully functional, mileage: 439,111 km, power: 338 kW (459.55 HP), first registration: 07/2022, fuel type: diesel, overall weight: 8,441 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise: I-See Predictive Cruise Control - Map based topography information Cab: Globetrotter XL Battery system type: Single energy battery system (2 batteries) Engine & Turbo Package: D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR Gearbox: I-shift Automated 12-speed - GCW 60 tonne Automatic transmission manual shift options: Standard transmission shift - I-Shift or Powertronic Psdpfx Ajxtvlgediegw Engine Brake Type: Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver comfort Cab Climate Unit: Electrically controlled air conditioning with sun sensor Driver Seat: Comfort 4: suspended - belt in seat Passenger seat: Comfort 4: suspended - belt in seat Top bunk: Height adjustable foldable top bunk 700 x 1900mm Lower bunk: Lower bunk 815mm wide in the centre Aux. cab heater: 1.8kW Air to air Refrigerator: 33 litre under bunk mounted fridge / freezer with dividers Driver attention support Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Tyre Size: 315/60R22.5 Drive Axle Tyre Size: 315/60R22.5 Fifth Wheel Type: SAF-Holland/+GF+ SK-S 36.20 cast fixed fifth wheel Wheelbase: 3800 mm Drive Axle Ratio: 2.17:1 Fuel tank - RHS: 570litre aluminium diameter 710mm Fuel tank - LHS: 900 LITRE, LEFT SIDE FUEL TANK WITH STEPS Plastic AdBlue Tank: 65 litre under/behind cab Cruise Control: Eco fleet software - with speed 85, I-See and push button I-shift Technology Secondary Information Display: Secondary colour information display FMS gateway: FMS gateway for Fleet Management System Exterior Headlamps: LED headlamps Daytime Running Lights: V-shaped Front fog lamps: Front fog lights - white Cornering lights: Static corner lights - works with indicator at low speed to light up direction Air Deflector - Roof: Roof air deflector Side air deflector: Cab side air deflector - long tractor

Condition: excellent (used), CEAST Type: 7026.000 CEAST Modular Melt Flow Tester Modular device for determining the melt flow rate Modular device for determining the melt flow rate in g/10 min and cm3/10 min according to international standards. Temperature range: +30 - +400°С (additionally up to 500°С). In the design of the device: - Microprocessor for automatic testing, storing test conditions (25 methods), storing and saving the results of 40 tests; Automatic calculation and display of temperature value and basic rheological data RS 232 and USB connection Diagnostics Automatic rotary knife for cutting extrudate Nozzle lock Pgedpfxjvx Sxde Adijw Loads: 500, 1000, 1050, 1200, 2160, 3800, 5000, 1600, 2500 The device can be connected to a computer and all functions are transferred to it. The Visual MELT program is used. Standards: ASTM-ISO-DIN-BS-NF-UNI - GOST or equivalent. Methods A and B. Basic model + encoder + lift for raising and lowering the load + automatic knife for cutting the extrudate, code 7026.000 Maximum force: 1200 N Stroke mm.: 220 Volt: AC 230 50 Hz Serv: Temp. (S2 60 sec) ASS.: 1.8 A Vel. max: 10 mm/sec Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: defective spare-parts repository (used), ABSCIEX AB SCIEX API 4000 Mass Spectrometer General Information Model API 4000 Manufacturer ABSCIEX Category Mass spectrometer Description Pgsdjvdb Sqepfx Adiow The AB SCIEX API 4000TM LC/MS/MS system uses the TurboIonSpray probe and the atmospheric pressure chemical ionization probe and the Atmospheric Pressure Chemical Ionization (APCI) probe to generate ions from liquid samples. The term LC/MS/MS used for the triple quadrupole series is a general term for the combined analytical processes of liquid separation and ionization. analytical processes of liquid separation and subsequent mass spectrometric analysis. The device is configured to perform complex MS/MS analyses, but can also perform single MS scans (LC/MS) for less stringent analytical requirements. AB Sciex API 4000 The API 4000 LC/MS/MS system enables all MS/MS modes of operation for the complete characterization of biopharmaceutical compounds and the specificity required for new drug development. For pharmaceutical and pharmacokinetic samples, MS/MS provides the sensitivity and specificity required to analyze hundreds of samples per day without extensive sample preparation. For peptides and proteins, molecular weights can be determined with an accuracy of better than 0.01 % at 200 kDa. ( Only as spare part dispenser, because incomplete !! ) Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: Podpfx Adjk Hz Nqeijgw 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, 3DGENCE Type: Industry F420 Pgsdpfx Ajwnpbgjdiew Technical data: Working area: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900mm x 950mm x 1950mm Printing system: dual extruder equipped with cleaning system + Interchangeable nozzle head Filament diameter: 1.75 mm Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic changing system Print head temperature (max.): 500°C Print bed temperature (max.): 180°C Work chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Changes and errors in the technical data, specifications reserved!) We would be happy to answer further questions by phone. Written orders possible by email or fax