Used Compounding Extruder for sale (528)

Year of construction: 2025, condition: new, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Godpjd Hqa Ijfx Abmobl Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired Godpfx Aji Dtbiebmebl OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant. Trail-run with your material-mix possible, darte and details uopn request.

Year of construction: 1989, condition: good (used), Extruder ZSK 58/32 D Year: 1989 Gbjdpfoxzfdbox Abmjl Stainless steel cooling tank Sheer dryer Sheer granulator

Condition: good (used), functionality: fully functional, Twin screw extruder / laboratory extruder - 2 x 30mm screw diameter - 4x heating zones - dosing Gbsdju Hik Dspfx Abmjl - Control system

Year of construction: 1996, condition: ready for operation (used), functionality: fully functional, screw conveyor diameter: 25 mm, TECHNICAL DETAILS Screw diameter: 2 x 25.0 mm L/D: 40:1 MACHINE DETAILS Total power: 12.0 kW EQUIPMENT Platform 4-way dosing system from Brabender Scholz dosing control Easytouch (year of manufacture 2009) 1x side feeder Gjdexx Uk Espfx Abmobl Degassing Strand die Water bath by Collin Scheer granulator SGS 50-ET

Condition: new, functionality: fully functional, Unused single-screw extruder / recycling extruder - Screw diameter: 140mm - Drive: Siemens motor 95 kW - Volumetric K-Tron dosing - Degassing zone - K-SWE 180 double piston screen changer / filter Gbodoqy E Evopfx Abmol - strand nozzle - Control system Optionally with strand pelletizer, water bath etc. Inspection possible by arrangement

Condition: like new (used), Extruder pants pieces for Weber DS 10.22 Gbodpjhlvm Nofx Abmol

Year of construction: 2000, condition: ready for operation (used), SINGLE SCREW EXTRUDER GRAEWE-FANGLI 60X33 Application: PE PIPES or PP PIPES Typ: 60 X 33 Screw diameter:60 Drive: 75 KW Output capacity PE: approx. 200 - 250 kg/h Condition: Good, ready to use The extruder is my property Godpoifgwhefx Abmobl Sachal Extrusionmachines Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Germany

Year of construction: 2011, condition: excellent (used), SINGLE SCREW EXTRUDER GRAEWE-FANGLI 90X33 Typ: SJ90X33 A6 Application: PE PIPES or PP PIPES Screw diameter: 90 Drive: 160 KW Output capacity PE: approx. 400 - 450 kg/h Gjdpfxsifgwlo Abmebl Condition: Good, ready to use The extruder is my property Sachal Extrusionmachines Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Germany

Year of construction: 1999, condition: ready for operation (used), AMUT EA90/24 SINGLE SCREW EXTRUDER Type: RALDI Screw for PVC oil cooled Application: PVC, PE or PP Working hours 48.000 DC Drive 36,3 KW Year of construction: 1999 11 digital heating controllers Melt pressure and melt temperature display SIEMENS SIMATIC DISPLAY Operating hours: 48,119 h Gbjdok Nn Dzopfx Abmsl Trigger control via the extruder possible Condition: Good operational The extruder is my property Sachal extrusion machines D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 Germany

Condition: good (used), Extrusion Line with Extruder & Co-Extruder. Sheet configuration B/A/B used for PP. Direct cooling unit (SMK) and SBI measuring unit newly installed in 2015. * Max. output: 1350 kg/h * Main screw output: 950 kg/h * Main screw: 180mm / 33D * Co-extrusion output: 400kg/h Gbodpfen Utt Hox Abmjl * Co-extruder scew: 120mm / 33D * Die width: 650mm * Roll stack: 3 * Winding unit for Jumbo rolls up to 1500kg This Extrusion Line is already disassembled and secured for transport (Location: Waalwijk, Netherlands).

Year of construction: 1997, operating hours: 31,850 h, condition: good (used), Conical twin screw extruder - Manufacturer: CINCINNATI - Type: Titan 45 - Conical screws Ø45mm - Year: 1997 Gbsdpsv D Nzmjfx Abmol - 31850 operating hours - Engine power: 15kW - Flow rate: 120kg/h - Replacement motor - Replacement vacuum pump - Replacement material feed screw

Year of construction: 2000, condition: used, Rotational speed: 227/min, power: 31kW, heating output: 7.8kW, length: 1952mm, width: 840mm, height: 1920mm, weight: 820kg. Gsdeduyyzepfx Abmebl

Year of construction: 2016, condition: ready for operation (used), Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible. Gsdpfxjv Uz Awe Abmsbl

Year of construction: 1998, condition: ready for operation (used), A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ONLY to customers outside Europe. Gbsdpfx Abjxq Exqjmjl

Year of construction: 1990, condition: ready for operation (used), A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible. Gbedpsvw Aqhofx Abmel

Condition: ready for operation (used), One complete and one partially dismantled extruder system Davis are available. 1) Davis Standard DS-25, power: 6385W, max. melt pressure: 700bar, max. temperature: 315°C. Including 4x screws, 6x bursting discs, Digicolor dryer, platform, screen changer with heating and sealing pack, new cylinder, 3x screw seals, and spare drive motor. 2) Davis Standard DS-20, power: 4500W, max. operating pressure: 700kg/cm², max. temperature: 315°C. Including Conair dryer, 3x screws, screen changer with heating and sealing pack, cast housing, extrusion tool, and spare drive motor. General accessories: various ring heaters, 3x Eurotherm temperature controllers, and 3x Eurotherm pressure sensors. Documentation available. An on-site inspection is possible. Gjdpfsxn S Umox Abmsbl

Year of construction: 1982, condition: ready for operation (used), A twin screw extruder is offered. Drive: ASEA electric motor type ACA 200-6L, 50.5kW, 1460rpm. Inspection possible by prior arrangement. Godpfx Aex Hifvjbmsbl

Condition: new, DANFOSS Pack Controller AKPC781A 080Z0191 2204180 Function: Pack with heat recovery Communication: EA expansion Weight: 0.645 kg Analog inputs (AI): 11 Digital outputs (DO): 8 Maximum number of expansion modules: 11 Maximum number of fans: 8 Maximum number of compressor safety signals: 6 Maximum number of compressors: 10 Protection class: IP10 Display options: MMIGRS2, EKA 163B, EKA 164B, EKA 166 Frequency: 50/60 Hz Division: 25 Supply voltage: 24 V Power consumption: 8 VA Gedpfxowm Dq Hs Abmjbl

Condition: new, DANFOSS Compound Controller AKPC572 080G0320 138938 Function: CO2 compound Communication: MODBUS Weight: 0.629 kg Analog inputs (AI): 8 Digital inputs (DI): 8 Application: Power controller Number of batteries: 1 Battery type: Lithium coin cell (CR1620) Mounting method: DIN rail Front panel display: Yes Frequency: 50/60 Hz Power consumption: 10 W Gbodpfowm Diiox Abmol Supply voltage: 24 V Further information: Relay 5,6 semiconductor type

Year of construction: 1993, operating hours: 281 h, condition: used, functionality: unexamined, Extrudex single-screw extruder ED-N45-25D, year 1993, condition used (completely overhauled in 2014) Type: ED-N-45-25D Rated voltage: 3x400V 50Hz Control voltage: 230V 50Hz / 24VDC max. main fuse 200A Drive motor Year: 2004 Type: EFG EF132 M Optionally included: - Belt haul-off - Calibration table For further information, please inquire. Godpoxw Tumofx Abmebl Price on request.

Year of construction: 1999, condition: used, Seocnd hand Entex Extruder PL- WE 100 complete with electrical cabinet. Wa in operation for Powder Coatings. For sell is also a Entex Extruder PL WE 70 ( Laboratory ). Photos on request. Gbsdpfx Abebqt Arjmsl

Condition: used, Used Buss extruder PLK 100 for sale. The extruder was used in the powder coatings sector. The extruder is fully functional Gbedpfx Asvfd Uqobmol

Year of construction: 2006, operating hours: 15,000 h, condition: good (used), For sale is an Erema 1007T. Year of manufacture: 2006 Operating hours: 15,420 Throughput: 250-350 kg/h Currently, the system is used to process HDPE, but it is also suitable for other plastics such as LDPE. Gbsdpfx Ajumubyjbmjl The system can be viewed during operation. A new extruder screw was installed in February.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Screws ø 90-36D, 45-30D, 45-36D Compact design, one shared control cabinet, approx. 800 kg/h Gedoyilykspfx Abmobl