Used Compressed Air Systems for sale (49,326)

Condition: new, Year of construction: 2026, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 500 L Pressure Vessel Chsdpfxexby D Aj Aipea Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 500 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1.1/4", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands both chemical and atmospheric conditions. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in both Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Precision and Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 500-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of air-powered devices and significantly extends compressor lifespan by reducing the number of start-stop cycles. The vertical design allows for space-efficient installation, which is especially important in facilities with limited room. A properly matched tank helps minimize pressure drops and prevents pneumatic system overloads, resulting in greater efficiency and enhanced safety across the entire installation. Standard Equipment Connection Ports: 6 pcs – diameters: 1.1/4", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Year of construction: 2026, condition: new, functionality: fully functional, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 3800 l/min Chjdpfx Asmt Dcqeipea Power 0.9 kW Supply voltage 230 V Dimensions (L x W x H) 850 x 480 x 480 mm Weight 59 kg Type and amount of refrigerant R410a, 650 g

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 2800 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 420 x 700 x 690 mm Weight 37 kg Chedpfx Aismt Dcfopja Type and amount of refrigerant R134a, 550 g

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator Chedpfsmt Dbhsx Aipea In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 1500 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Type and amount of refrigerant R134a, 400 g The price given is a NET price. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Condition: excellent (used), Year of construction: 2020, operating hours: 51,008 h, functionality: fully functional, Used Kaeser TE142 refrigerated dryer 15.50 m3/min Cedozcmpvspfx Aipeha 16 bar Year of manufacture: 2020

Condition: good (used), Year of construction: 2011, input voltage: 230 V, Pneumatic corner clamp. Knives for Reynaers systems, included. Csdpfx Aijy Twnxopjha

Condition: used, functionality: fully functional, Central ventilation unit HELIOS Air 1 XH1500 with highly efficient heat recovery and integrated air reheating. For controlled supply and exhaust ventilation of larger residential, commercial, or industrial areas. 2 EC fans at 0.5 kW each, 1,490 m³/h at 350 Pa. Electric preheating coil 3.9 kW, electronic reheating coil 3.8 kW, cross-flow heat exchanger, integrated filter box. Includes HELIOS Universal control unit ECO and 2 HELIOS duct sensors TFK – a functionally complete system. Technical data: - Air flow rate 1,490 m³/h at 350 Pa; fans 2 x 0.5 kW EC - Preheating coil 3.9 kW / Reheating coil 3.8 kW; cross-flow heat exchanger; integrated filter box Csdpfx Aezmaqaoipjha - Control system: HELIOS Universal control unit ECO and 2 duct sensors TFK included - From a commercial environment, sold in its current condition without warranty. More units and equipment are continuously being offered for sale as part of a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of a customer via the Köck auction house. Located in eastern Austria, exact address available upon request. Collection/dismantling by the buyer.

Condition: excellent (used), Year of construction: 2022, volume flow: 10 m³/h, AIRPRESS CRDP 600 desiccant dryer Capacity: 10 m3/min Chjdpfx Aiozkwatopea Year of manufacture: 2022 THE DRYER IS IN FULLY WORKING CONDITION.

Condition: excellent (used), Year of construction: 2017, volume flow: 5,500 m³/h, RENNER OM-COMD 330 desiccant dryer Capacity: 5.5 m³/min Chjdozkwagjpfx Aipja Year of manufacture: 2017

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D Chedpfx Aiou D Tz Ujpea No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition 3 pieces available, price per piece

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Csdpfxsr R Ewlj Aipsha Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: used, Year of construction: 1997, Technical details: content: 500 cbm capacity in bar: 11 operating pressure: 11 bar weight of the machine ca.: 0,23 t dimensions L x W x H: Ø 620 mm x 1800 mm Pressure tank Codpfxsu Nz S Eo Aipeha Pressure vessel according to directive 87/404/EEC Mark of conformity TÜV NORD 2017 Stands on base frame = steel profile frame welded. Connecting pieces: 1/2" with locking valve; 1/2" with plug; 1" with manometer; 1" with plug Connecting piece 2x left/right 1" with hose connection Temperature range min./max.: -10°C / +50°C Equipment: Ceiling support pressure hose (inside Ø 20mm) length 4m Pressure reducer with adjustable double connection *

Condition: used, Year of construction: 1994, Technical details: tank capacity: 150 l operating pressure: 11 bar dimensions L x W x H: Ø 550 mm x H: 1,2m weight: ca. 60 kg For sale as shown and described, as an unpressurised tank for a sale at low price. Condensation drain valve at the bottom with hand lever 2 connection pieces 1/2 inch Chedpfx Asu Nz Tijipja 2 connection pieces on the ceiling side 2 inch with blind plugs Boiler/tank Ø 450 x 1000mm upright on tripod stand Temperature max. +50°C / min. 10°C pressure gauge *

Condition: excellent (used), Year of construction: 2003, PROD. ULTRATROC TYPE SD7000A S/N 032/16350/01 YEAR 2003 POWER (kW) 12.2 CAPACITY (m3/min) 116.67 PRESSURE (bar) 16 HOURS (RUNNING/TOTAL) INVERTER BUILT-IN DRYER R134a 33.5kg EXCHANGER COOLED (AIR/WATER) ON THE TANK DOCUMENTS CONNECTION dn 200mm Chsdpfozkib Nox Aipsa NEW/USED USED

Condition: good (used), Year of construction: 1999, Compressed Air dyer Cjdpfx Ajg Nk Aboipsha Operating pressure: 13 - 18 bar Flow rate at 7 bar: 12,7 m^3/min Voltage: 400 V Weight: 660 kg Overall dimensions: 1050 x 1550 x 1500 mm

Condition: excellent (used), Year of construction: 2008, Refrigerated dryer Manufacturer: Kaeser Csdpfxoy Sgh Eo Aipsha Model: TE 121 Year of manufacture: 2008 Volume flow: max. 12.7 m³/h

Condition: used, Year of construction: 2025, Technical details: Cedpfxoy I Rr Te Aipsha content: 1000 cbm capacity in bar: 11 total power requirement: - kW tank capacity: 1000 l operating pressure: 11 bar dimensions of the machine approx. HxWxD: 2,32 x 0,8 x 0,8 m weight: 260 kg

Condition: new, Year of construction: 2019, functionality: fully functional, volume flow: 324 m³/h, total height: 1,285 mm, overall weight: 165 kg, ALUP AD325 adsorption dryer 2019 NEW never used. for sale brand new dryer old stock (2019) includes two brand new filters. Cedeu Rpg Topfx Aipjha capacity : 324 M3/H height : 1285 mm width : 620 mm depth : 571 mm weight: 165 kg connection: 1" 1/2 tested and ready for use.

Condition: new, Year of construction: 2026, The KANTENKING is the most favorable edge processing solution for creating the zero joint for the trades with feed speeds from 10m / min, as well as in the industrial sector, with high speeds up to 22 m/min. Cjdpfx Aisd Dczzjpjha The Kantenking HTK3030 has a speed of max. 22 m/min.. Your edge edger is still "in good condition", but you have already heard a lot about the null joint and ask yourself, if this is also suitable for you. You can retrofit the HOT-AIR system in any existing edge banding or BAZ. The Hot-Air-System has low maintenance and reliable. You tell us your wishes and machine data. So we can together with you and your ideas make an offer for the optimal product. Feed speeds up to 22 m/min. are possible. The Hot-Air-System is optimally integrated in your edge banding or machining center. Please don't hesitate to contact us.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Used MTA DEIT165 refrigeration dryer 16.50 m3/min 16 bar Year of manufacture 2016 Codpfxey Nkl No Aipoha

Condition: good (used), Compressed Air Line / Pressure Air Line made of aluminium The stated price is for all compressed air pipes together. Total: approx. 325 m of pipe Chodpfx Aiovv Nvnjpoa Sale / delivery of partial quantities is possible!

Condition: excellent (used), Year of construction: 2016, operating hours: 64,020 h, functionality: fully functional, Used Atlas Copco FD285 refrigerated dryer 17.10 m³/min 14 bar Year of manufacture: 2016 Chjdpjy Iwc Esfx Aipoa

Condition: used, Compressed air system with compressed air compressor and compressed air tank - KAESER SK26 screw compressor (built in 2005) - Gebre GmbH compressed air tank with a capacity of 750 litres (built in 1996), standing on 3 feet with pressure gauge. Additional title: air compressor with compressed air tank Delivery appr.: 2,2 m3/h Max. working overpressure compressor: 10 bar Gross volume compressed air tank: 750 l Max. working overpressure compressed air tank: 11 bar Power: 15 kW Current: 400 V Voltage: 35 A Frequency: 50 Hz Length: 0,8 m Width: 0,8 m Height: 1,03 m Weight: 290 kg Operation / Control: control panel on compressor Base construction: tank vertical on 3 feet Features: air compressor, compressed air tank Cedpfow Tbtksx Aipjha

Condition: used, Compressed air system with air compressor, refrigeration dryer, activated carbon filter and two compressed air tanks. Chedpfx Aieyzhz Sjpja Capacity: 202 m3/h Operating pressure: 10 bar Features: Air compressor; refrigeration dryer; activated carbon filter; 2 x compressed air tanks.

Condition: used, Year of construction: 2019, Oil-free piston compressor with 90 l compressed air tank and separate refrigeration dryer. Additional title: piston compressor with refrigeration dryer Delivery volume: 0.252 m3/min at 6 bar Max. overpressure: 7 bar Volume pressure vessel: 90 l Power: 2.2 kW Features: piston compressor with pressure tank, refrigeration dryer Chedpfexfquyox Aipoa