Used Condensation Dryer for sale (2,363)

Condition: used, Year of construction: 2003, AVAILABLE from 08/2026 UV dryer, Cefla UV 2000 - Manufacturer Cefla/Sorbini - Type UV 2000 M2 / TTE2500 - Year of manufacture 2003 - Working width 1.300 mm (1.445) mm - Working height 900 + - 40 mm - Operating side right - Max. part height 70 mm - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Suitable for mercury tubes - Suitable for gallium tubes - Tube power max. 120 W/cm - Bar transport - Length 2.500 mm - Width 2.300 mm - Height 1.500 mm - Volts, Hz 400 /50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/- 5% Images are only examples of a machine of the same design* Kljdpfxjyifwps Am Ejr

Condition: used, Year of construction: 2012, - Manufacturer Venjakob - Year of construction 2012 - Working width 1.300mm - Type. Flash off dryer, VEN DRY Flash Off - Part height max. approx. 120mm - Zone1, paint calming zone with cover hood without air 3,000+300mm - Zone2, flash off zone 10,000mm - Laminar flow dryer in the opposite direction to the parts - Supply air 4,000m³/h - Exhaust air 4.000m³/h - Air volumes adjustable via flaps - Heat output approx. 65 kW - Air speed 2-5m/s - Max. Drying temperature 30°C Klsdpfxou Edhue Am Ejr - Heat exchanger, heating water PWW max. 90/70 degrees - Belt conveyor, length 13,800 mm - Feed speed approx. 2-10m/min, Frequency converter required on site. - Volt, Hz 400 / 50 - Motor power 2.5+1.5+0.75KW - Without switch cabinet - Location, at the Blomberg warehouse

Condition: used, Year of construction: 2007, UV Dryer, Cefla UV 2000 - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445 mm) - Working height: 900 +/- 40 mm - Operator side: right - Max. part height: 70 mm - Number of top lamps: 2 pcs. - Lamps, vertically aligned: 2 pcs. - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power, max.: 120 W/cm - Conveyor type: rod transport - Length: 2,500 mm - Width: 2,300 mm - Height: 1,500 mm - Voltage, Hz: 400 V / 50 Hz - Total electrical connection: 86 A / 36.4 kW - Voltage fluctuations max.: +/- 5% Ksdpfsxn Nlvjx Am Eolr Images are for reference only and show a similar machine.*

Condition: used, for installation on an existing bar conveyor. Includes: casing with 2 tubes, exhaust fan and control cabinet. Without conveyor Kljdsumvqcopfx Am Esr

Condition: used, Year of construction: 2008, - Manufacturer Efsen/Cefla - Type Woodcure 1400 - Year of manufacture UV 2008, transport/conveyor 1998 - Working width 1,300 mm (1,445) mm - Working height 870 + - 20 mm - Max. part height 70 mm - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Tube power 120 W/cm - Suitable for mercury tubes - Suitable for gallium tubes - Manufacturer of transport system Cefla - With cross bar conveyor - Bar spacing 95 mm - Feed adjustable via hand wheel ~ 5-25 m/min - Installation length: 3,500 mm - Width: approx. 2,100 mm - Volts, Hz 400 /50 - Total electrical connection 38 kW - Voltage fluctuations max. +/- 5% Kledpfjvupdcjx Am Ejr

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm Kodpfxju S N R Es Am Ejlr - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Condition: used, Year of construction: 2013, machine/vehicle number: A1312006-0030, - Manufacturer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 - Working width 1,300 mm Kedpexfkbasfx Am Eelr - Working height 940 + - 20 mm - Length of exhaust duct 3,800 mm - Supply air capacity 100 m³/h - Exhaust air capacity ~ 500- 1000 m³/h - Recirculated air capacity ~ 3,000 m³/h - Max. Drying temperature ~ 30 degrees - Air velocity 0.5 - 2 m/s - IR emitters 12 pcs. - IR heater output 12 x 1.5 kW - Belt conveyor, length 4.000 mm - Location, at the warehouse - El. Power 20KW / 63A - Volt, Hz 400/50 - Voltage fluctuations max. +/- 5 % - Control cabinet with touch screen display

Condition: used, Year of construction: 2008, - Producer Printworld - Type PUVD 1600-2 - Year of construction 2008 - Working width 1.600 mm - Working height 1.030-1.050 mm - Max. part height 25 mm - Operationside left - Number of lamp from top 2 Stk. - For mercury lamps - For gallium lamps Kljdpjumvkcofx Am Esr - Electic capacity lamp 120 W/cm - Selective shiftable 60 / 90 / 120 W/cm - Conveyor with netbelt - Feed speed adjustable 2 - 50 m/min - Installation length 3.300 mm - Machine measure 3,3 x 2,5 x 1,8 m - Location - Voltage / HZ 400 / 50

Condition: used, Year of construction: 2016, machine/vehicle number: 9960-10-1059, techncal data: - Producer: Printworld Kodou Abn Tjpfx Am Eslr - Type. 3D - PUVD 1300 - Working width: max. 1.300 mm - UV-lamp length: 2 x 1.600 mm arc length - Curing systems: 2 pcs of curing systems from top + 1 pcs curing system from down under - UV- power regulation: UV- lamps are able to be individually controlled (30% -100%) - Reflector: Printworld Multifocal –Reflector - Conveyor transport width: 1.400 mm - Total lengths: 4,5 m - Conveyor speed: 3 – 20 m/min - Substrate passage height: 60 mm, max. (option higher) - Execution conveyor belt: PTFE Fiberglass mesh conveyor belt, anti-static coated - Conveyor speed regulation: Infinitely variable with digital control and monitoring - Conveyor adjustment: Conveyor belt guiding system - Conveyor belt drive: Stepper motor with variable speed conveyor belt and digital - control and monitoring - UV radiation protection: Built in on the machine frame - Energy Saving: Automatic standby circuit with power reduction about 10% - Operation / control: Schneider Modicon M258 Logic Controller processor with Magelis colour touch screen - Inlet height: 850 – 900 mm or by appointment) - Outlet height: 850 – 900 mm (or by appointment) - Electrical connection: 400V~, 50 Hz, 3- Phases +N +PE - Current 135A - Location: on stock

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, ATTENTION > SPECIAL PRICE UNTIL 28/04/2026 Due to restructuring, we are selling a premium-class automatic screen printing press suitable for ambitious beginners and professionals, consisting of: TAS Textile Printing Press Model 203 RA L (year 2001) incl. spare parts worth approx. €300 - Very good condition / low usage - 10 pallets / 8 colors - Extra large print area: max. 500 x 620 mm - Max. frame size: 660 x 930 mm - Incl. intermediate dryer 9.0 kW (variable use) - Drive type: pneumatic - Pneumatic screen clamping - Central lift-off device - High-quality components from renowned manufacturers installed (e.g. FESTO, EBM Papst, ...) - Two pallet sets - Incl. various squeegees and flood bars Recently, a large portion of the hoses was replaced and one pneumatic cylinder was completely overhauled! Kodpfxjyrz Edj Am Eslr Available spare parts: - 3x pneumatic cylinders for screen holders - 1x switch for screen clamping (Bosch) - 1x regulator for squeegee/flood speed (Bosch) - 5x squeegee holders - 1x silencer (Riegler) - Pneumatic hose (Festo) - Various hose connectors (Festo, Riegler) - Various plugs The machine delivers precise printing after proper installation, runs smoothly, and is extremely durable. We are happy to answer any questions! Note for German customers: There is a German company specializing in these premium machines, which ensures professional maintenance and spare parts supply. The price is NET (excluding VAT)!

Condition: new, Year of construction: 2026, With the ERBA Granulate Dryer EVK 350, workpieces can be easily separated from the granulate using the integrated screening unit. The machine features excellent drying performance, a direct heating system, and digital temperature control. The working container is fully coated with polyurethane on the inside. The EVK 350 can be linked with other machines in a processing line. Technical Data: Klsdpfxjyq Rcvj Am Eor - Gross volume: 350 L - Unbalance motor power: 2.2 kW - Heating power: 3.6 kW - Speed: 1,400 rpm - Internal drum diameter: 1,210 mm As an experienced partner, we provide you with expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions to achieve optimal process results. All prices are net, plus the currently applicable VAT and shipping costs. The images may show the system including accessories, which are optionally available and subject to additional charges. If interested, we look forward to your inquiry. We are pleased to provide you with non-binding, professional advice. The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunications (email, telephone, messaging portal). As a first step, we will make you a non-binding offer, which will also include our general terms and conditions with imprint and information on your right of withdrawal, before a purchase or contract is concluded.

Condition: new, Year of construction: 2026, With the ERBA Granulate Dryer EVK 500, workpieces can be easily separated from the granulate using the integrated screening unit. The dryer features outstanding drying performance, a direct heating system, and digital temperature control. The working container is fully coated internally with polyurethane. The EVK 500 can be integrated into production lines with other machines. Technical specifications: - Gross volume: 500 L - Vibration motor power: 4.0 kW - Heating power: 4.8 kW - Speed: 1,400 rpm - Inner drum diameter: 1,440 mm As an experienced partner, we offer comprehensive expertise in the field of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. Klsdpfjyq N Dfex Am Eer All prices are net plus applicable VAT and shipping costs. The images displayed may show the machine with optional accessories, which are available at additional cost. If you are interested, we look forward to your inquiry. We will be happy to provide you with non-binding advice. The European Commission provides a platform for online dispute resolution (ODR platform). This listing is for informational purposes as an online representation of our products. All contract negotiations are conducted via telecommunication (e-mail, telephone, messaging portal). In the first step, we will provide you with a non-binding offer, which will also include our general terms and conditions (with legal notice) and information on your right of withdrawal, prior to any purchase or contract conclusion.

Condition: excellent (used), Year of construction: 2009, The new cold-regenerating adsorption dryer from Parker Zander combines proven and reliable elements of adsorption technology and impresses with its clear design. Key features of the K-MT series adsorption dryers, such as: • one-piece adsorber profiles • separately controlled main and discharge valves in a leak-free design • compact check valve combination, guarantee continuous operational reliability and high availability. All K-MT series adsorption dryers feature: • self-cleaning screen trays on the wet side • high-quality desiccants Ksdpfx Aoypb Duom Ejlr During adsorption, the desiccant stores the moisture contained in the compressed air. Parker Zander uses exclusively highly active, high-capacity molecular sieve desiccant. This desiccant guarantees a long service life at high inlet temperatures or low pressure dew points. Regeneration takes place in the opposite direction to adsorption. A portion of the dried compressed air is depressurized to atmospheric pressure and passed through the desiccant bed to be regenerated. The moisture stored during adsorption is carried away with the partial flow of dry regeneration air. The regeneration air requirement of 14.3% for cold-regenerated adsorption dryers is based on: Operating pressure 7 bar Inlet temperature 35°C Pressure dew point -40°C for a cycle with: - 5 minutes of adsorption - 4 minutes of desorption - 1 minute of pressure build-up The Parker Zander 10-minute cycle, with 5 minutes of adsorption, includes 12 load cycles per hour. The standard 6-minute cycle, with 3 minutes of adsorption, requires 20 load cycles per hour and therefore inevitably 5.6% more regeneration. The Parker Zander 10-minute cycle saves energy costs with reduced wear. Multitronic, the control system with groundbreaking new functions and a new design, is perfectly tailored to the K-MT series of cold-regenerating adsorption dryers. It allows for highly effective adaptation of the adsorption dryer to even the most diverse operating conditions. From the continuously visible status to the pressure dew point control of the adsorption dryer, the benefits for the operator are readily apparent with Multitronic. Housed in a clear and easily accessible control cabinet, the Multitronic system offers: • user-friendly microprocessor control for all Parker Zander Heatless dryer systems • flexible cycle time settings. • Front-panel LEDs for individual functions such as: - Operation - Adsorption - Desorption • Selector switch I-0-2 for fixed cycles or variable cycles as synchronization with the compressor Optional features: • Direct pressure dew point measurement including digital display • A potential-free output for the pressure dew point limit • The ability to set the desired dew point in the range of -25°C to -40°C Technical specifications: K-MT 8 Capacity m³/h: 72 Connection: G ½ Pressure bar: 16 Weight kg: 77 Electrical connection watts: 50 Year of manufacture: 2009 Manufacturer's price: €8,880 "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2019, MANUFACTURER: DRYTEC MODEL: MDA3600 SERIAL NO.: 3519MBP00146 YEAR: 2019 POWER (kW): 0.075 CAPACITY (m3/min): 60 PRESSURE (bar): 10 Kledpfx Ameyzzulo Eor

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: TR0055_ALMRD225, NEW COMPRESSED AIR REFRIGERATION DRYER ALMIG ALM-RD225 Type: ALM-RD225 incl. 2 x air filters Delivery quantity: 3,50 m³ / min * Klodpfsg Ufx Esx Am Eer Compressed air connection 1 1/2 " Dimensions L x W x H: 555 x 505 x 874 mm Weight: 78 kg * Maximum compressed air flow, 35 ° C inlet temperature, 7 bar, 25 ° C ambient temperature, pressure dew point 3 ° C Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: AC, volume flow: 486 m³/h, total width: 610 mm, total length: 625 mm, total height: 1,030 mm, overall weight: 92 kg, input voltage: 230 V, ambient temperature (max.): 50 °C, ambient temperature (min.): 1 °C, type of cooling: air, pressure (max.): 14 bar, power: 0.98 kW (1.33 HP), input frequency: 50 Hz, Equipment: type plate available, We offer this new Friulair ACT 80 compressed air refrigeration dryer, year of manufacture 2022. Voltage: 230 V Frequency: 50 Hz Kedpfx Amjyf Earo Eslr Power consumption: 0.98 kW Current: 4.6 A Max. operating pressure: 14 bar Air flow rate: 8,100 l/min / 486 m3/h Refrigerant: R407C Weight: 105 kg (gross) Condensate drain: Bekomat If you have any questions or need more information, please send us a message or give us a call.

Condition: excellent (used), Year of construction: 2016, MANUFACTURER: DONALDSON MODEL: HRS1650 SERIAL NO.: 1C601810 YEAR: 2016 POWER (kW): CAPACITY (m3/min): 27.5 PRESSURE (bar): 10 Klsdpeyzpv Rjfx Am Ejr

Condition: excellent (used), Year of construction: 2026, operating hours: 5 h, functionality: fully functional, variable screw compressor ALMIG COMBI XP 15-270D (5 to 13 bar) include Dryer with time controlled drain include 270 liter tank include controller Air Control Base Operatin hours: 5 Klsdpfxew Du Dxo Am Ejr Technical specifications Type: Combi XP 15-270D Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.50 to 2.49 m³/min at 6 bar (g): 0.48 to 2.41 m³/min at 7 bar (g) : 0.48 to 2.32 m³/min at 8 bar (g) : 0.45 to 2.23 m³/min at 9 bar (g) : 0.45 to 2.12 m³/min at 10 bar (g) : 0.45 to 2.02 m³/min at 11 bar (g) : 0.45 to 1.90 m³/min at 12 bar (g) : 0.44 to 1.80 m³/min at 13 bar (g) : 0.43 to 1.69 m³/min Nominal power drive motor: 15 kW Degree of protection / insulation class drive motor: IP 23 Operating voltage / frequency: 400/85-400/3 V / Hz / ~ Compressed air connection: 3/4“ G Length: 1530 mm Width: 700 mm Height: 1640 mm Weight: 595 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: excellent (used), Year of construction: 2025, operating hours: 11 h, functionality: fully functional, variable screw compressor ALMIG COMBI XP 11-270D (5 to 13 bar) include Dryer with time controlled drain include 270 liter tank include controller Air Control Base Year of construction: 2025 Operatin hours: 5 Technical specifications Type: Combi XP 11-270D Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.30 to 2.00 m³/min at 6 bar (g): 0.30 to 1.89 m³/min at 7 bar (g) : 0.30 to 1.78 m³/min at 8 bar (g) : 0.29 to 1.67 m³/min Klodpfx Ajw Duytjm Eer at 9 bar (g) : 0.29 to 1.57 m³/min at 10 bar (g) : 0.29 to 1.46 m³/min at 11 bar (g) : 0.28 to 1.36 m³/min at 12 bar (g) : 0.28 to 1.24 m³/min at 13 bar (g) : 0.27 to 1.17 m³/min Nominal power drive motor: 11 kW Degree of protection / insulation class drive motor: IP 23 Operating voltage / frequency: 400/60-315/3 V / Hz / ~ Compressed air connection: 3/4“ G Length: 1530 mm Width: 700 mm Height: 1640 mm Weight: 590 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: excellent (used), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, variable screw compressor ALMIG COMBI XP 6-270D (5 to 13 bar) include Dryer with time controlled drain include 270 liter tank include controller Air Control Basic Year of construction: 2025 Operatin hours: 1 Technical specifications Type: Combi XP 6-270D Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.19 to 0.89 m³/min at 6 bar (g): 0.19 to 0.86 m³/min at 7 bar (g) : 0.19 to 0.82 m³/min at 8 bar (g) : 0.18 to 0.78 m³/min at 9 bar (g) : 0.18 to 0.76 m³/min at 10 bar (g) : 0.18 to 0.69 m³/min at 11 bar (g) : 0.18 to 0.67 m³/min at 12 bar (g) : 0.17 to 0.63 m³/min at 13 bar (g) : 0.17 to 0.59 m³/min Nominal power drive motor: 5.5 kW Ksdpfsx Uqxgjx Am Eolr Degree of protection / insulation class drive motor: IP 23 Operating voltage / frequency: 400 V / 73-290 Hz Compressed air connection: 3/4“ G Length: 1530 mm Width: 640 mm Height: 1520 mm Weight: 470 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Year of construction: 1999, condition: ready for operation (used), An Arburg plastic granulate dryer with integrated material conveying is available. Hopper volume: 100l, max. drying temperature: 150°C, heating capacity: 4.5kW, air capacity: 90m³/h, conveying height: approx. 3000mm, machine dimensions X/Y/Z: approx. 950mm/600mm/2000mm, weight: approx. 150kg. An on-site inspection is possible. Kedoyuyvajpfx Am Ejlr

Condition: good (used), power: 120 kW (163.15 HP), control type: PLC-controlled, For Sale: Complete 120 kW Industrial Pellet/Bio-Heating Container A powerful and turnkey heating solution. This package combines a high-capacity boiler with a professional 95–120 kW EcoTec B3 burner system, all pre-installed in a weatherproof container. Ideal for farms, large properties, or industrial facilities. Ksdpsy Eipfefx Am Eelr Technical Specifications (Model 120) Designed for heavy-duty operation with the following features: Boiler & Performance - Nominal Output: 120 kW - Burner: EcoTec B3 (95 kW nominal / compatible with 120 kW boiler) - Dry Weight: 1030 kg - Water Capacity: 450 l - Max Operating Pressure: 1.5 bar - Max Operating Temperature: 110°C - Material Thickness: 6 mm (fire surfaces and water jacket) Physical Dimensions - External Dimensions: 1485 mm (Depth) x 930 mm (Width) x 1410 mm (Height) - Firebox Size: 650 x 650 x 1030 mm (Volume: 480 l) - Container: Approx. 10 ft, blue, including chimney stack and external fuel loading port Fuel & Chimney Requirements - Fuel: Wood pellets / biofuel (compatible with underfeed firing technology) - Chimney Outlet: 1060 mm from floor, 160 x 220 mm flue size - Chimney Recommendations: - Fuel with moisture < 20%: Ø 220 mm / 8 m height - Fuel with moisture > 20%: Ø 250 mm / 10 m height Key Features - Turnkey Solution: No boiler room required. 10 ft container is fully preinstalled and “plug-and-play” – simply connect to your heating system and supply power. - Professional Automation: Fitted with a Unitronics Vision230™ PLC controller and an intuitive control panel (main switch, pump control, fault reset, and emergency stop). - Robust Construction: Heavy-duty Swedish engineering by Sahlins EcoTec AB (2007). 6 mm steel ensures a long operational life. - Large Fuel Silo: Integrated, internal V-shaped bunker with heavy-duty feed auger for extended autonomous operation. - Connections: 50 NS flow/return and expansion, 20 NS thermostat, and 2x 50 NS electric heater connections. Sales Information - Condition: Meticulously maintained, complete working unit. This is a unique opportunity to acquire a high-output, mobile heating plant at a fraction of the price of a new system.

Condition: excellent (used), Year of construction: 2018, operating hours: 50,708 h, functionality: fully functional, Compressed air dryer Atlas Copco FD1750+ 14 bar 105 m3/min Klsdpfeyr A Uyox Am Eor

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 3510184000225, total length: 1,500 mm, sweeping width: 660 mm, empty load weight: 170 kg, fuel type: electric, construction height: 1,050 mm, drive type: Elektro, construction width: 600 mm, Scrubber Dryer Chassis Number: 3510184000225 Condition: Ready for operation and fully functional Technical Condition: Good Kedpeynhc Uofx Am Eolr Battery Voltage: 24V Battery Year: 2023 Description: Max. runtime (hours): 4.3, Max. speed (km/h): 5.6, IP protection class: IPX4, Protection class: III, Power consumption (kW): 1.42, Brush motor (W): 2 x 400, Drive motor power (W): 200, Suction motor power (W): 420, Noise level at 1.5 m distance (dB(A) ISO 3744): 58, Theoretical/practical area coverage (m²/h): 3700/2200, Working width (mm): 660, Turning circle (cm): 200, Water delivery (l/min): 1.1/3.4, Clean/Dirty water tank (l): 85/85, Squeegee width (mm): 890, Brush/pad diameter (mm): 330/330, Brush pressure (kg): 32/52, Brush speed (rpm): 220, Number/type of brushes: 2

Condition: ready for operation (used), Year of construction: 2015, Dulevo 1100 EH Ride-on Sweeper Sweeping Vacuum Machine Scrubber Dryer Year of manufacture: 2015 Weight: 955 kg Operating hours: 62.6 h Kledpfx Amoywtmxo Ejr Min. cleaning path (mm): 750 Max. cleaning path (mm): 1440 Debris hopper capacity: 220 L Hourly performance: 10,080 m²/h You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided you supply a valid VAT ID. Subject to prior sale. Visit our shop and browse our additional listings. Stated company names and trademarks are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the item description may occur and are reserved.