Used Contour Edge Banding Machine for sale (93,169)

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Working line (work units support tables), manual adjustment Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (5,8 + 5,8) Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Control EC 40) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (Kw 0,65 x 2) speed 28m/min. 0 - 25°. PNEU Fine Trimming unit (Multi-profile, by N.C.) RF 40 (Kw 1 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0, 65 x 2) max speed 25 m/min - ROTAX motors with automatic tool change (tools) Milling grooving Unit 2 x FB 30 (Kw 5 x 2) 0 - 90° Profile Scraping unit (Multi-profile, by N.C.) RBK - 503 (2 POSITIONS) Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) + Buffing unit SZ 30 (Kw 0,37 x 2) Hsdohvahhjpfx Ag Nenu

Condition: used, Year of construction: 2018, Manufacturer: Lange Maschinenbau Model: B 70 K Used machine Year of manufacture: 2018 Machine for edge heights up to 100 mm! Factory-inspected Hnedjwka S Ijpfx Ag Neu Equipment/features: - Machine table with 13 roller tracks for improved workpiece guidance - Edge feed, synchronised with the belt feed - Adjustable edge thickness via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber cover. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with supply from below and rapid heat-up time after machine stoppage - End trimming unit for workpiece front and rear edges, automatic sensing on the workpiece, pneumatic trimming with knife for cuttable edges - Flush milling unit with vertical sensing and horizontal guidance, reproducible adjustments via digital counters, two powerful 0.4 kW high-frequency motors, stepless speed control from 4000 to 18000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, two chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, support rail can be extended by approx. 300 mm - Rotatable film tray Ø 800 mm Technical Details: - Minimum workpiece width: approx. 80 mm - Workpiece thickness: 10 – 100 mm - Minimum workpiece length: approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Maximum roller separation: 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Electrical connection: 400V, 50 Hz, 3Ph + N - Total power requirement: 3.8 kW - Heat-up time: approx. 10 minutes - Pneumatic connection: 6 bar - Working height: approx. 880 mm - Dimensions: approx. 1800 x 700 x 1300 mm (without film tray Ø 800 mm) - Net weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2018, Edge bander Manufacturer: Felder Type: G360 Year of manufacture: 2018 Operating hours: approx. 1,288 h Edge thickness: 0.4 - 3 mm Workpiece thickness: 10 - 45 mm Feed: 8 m/min Total power: 5.5 kW Total length: approx. 3,200 mm Hodpfxjwrqk Ds Ag Nonu Jointing unit: Yes Cross-cut saw unit: Yes Flush milling unit: Yes Surface scraper: Yes

Condition: used, Holz Her Auriga 1308 FÜ + PU Compact design – edge thickness 0.4 - 6 mm SPS screen control Edge-Control PPC 221 color display Pre-milling unit for jointing before the glue application station Fully automatic edge magazine for coil and strip material Gluing station GLU-JET for EVA and PUR adhesives, cartridge or granulate + PU Adhesive application via nozzle technology Hjdpjxbf Sxjfx Ag Njnu Workpiece height 6-65 mm automatic glue height adjustment Pressure unit 1912-3 pneumatic End trimming unit 1918 pneumatic for coil and strip material up to 8 mm edge thickness With pneumatic adjustment from 0-10° tilting of the saws Milling unit 1827 MOT 4, flush trimming 8 mm, radius milling – chamfer milling – 15° 1827 MOT NC axes via control panel Corner rounding unit 1832 SPS, rounding of corners up to 3 mm edge thickness in through-feed Scraper unit for chamfer and radius with 2 scraper holders - MOT Flat scraper unit – finish Spray device – PU Complete DIA tool kit included Machine is FACTORY-REFURBISHED in TOP CONDITION Available ex stock Lieboch

Condition: used, Year of construction: 2007, Used Machine GM020.0068 AKV 3003 DK - F Year of manufacture: 2007 Specification: 3 mm Hnsdpfx Asw Nih Isg Nou 1st milling station: Combination Surface pull scraper with extraction Chassis Pneumatic milling adjustment Limit switch lever, 7.5° inclination

Condition: used, Year of construction: 2001, functionality: fully functional, Used, fully functional OTT PACIFIC for sale! Machine length: 6.30 m! Hodpfexc Hhkjx Ag Njnu

Condition: new, Year of construction: 2025, Pre-milling unit: yes Pre-milling unit material removal: 0 - 2 mm plastic edges: 0,4 - 3 mm solid wood edges: 0,5 - 5 mm Workpiece thickness: 8 - 50 mm Minimum length of workpiece: 120 mm Min. work piece width: 110 mm Anti-adhesive spraying unit: yes Edge preheating device: yes / with ceramic infrared lamp Bonding unit: granulat / Glue container quick-change kit Jack knife: yes Flush trimming unit: yes Corner copy unit: yes Hnjdpfxel D Rx Ue Ag Nsu Flush radius milling unit: yes Radius scraper unit: yes Area scraper unit: yes Buffing unit: yes Cleaning spray unit: yes motor power: 5 kW machine length: 3774mm machine width: 1546 mm machine height: 1337mm weight: 842 kg

Year of construction: 2006, condition: ready for operation (used), Glue type: PUR glue, glue application system: cartridges, max. edge thickness: 25mm, max. workpiece thickness: 60mm, feed rate: 16m/min, min. workpiece length: 140mm, min. workpiece width: 60mm. Including various spare parts and Ligmatec return. Documentation available. On-site inspection is possible. Hodpfx Ageugmw Es Njnu

Condition: excellent (used), functionality: fully functional, EDGE BANDING machine model BIESSE AKRON 245 second hand machine CE regulation : Yes with Instruction Booklets for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various NC 321 electronic positioner Technical data: min. height of gluing panel mm.10 max. height of gluing panel mm.45 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.8 min. panel width mm.50 min. panel length mm.150 feed speed motor power Hp 2 electric press lift telescopic support for large panels soundproof cabin Composition: gluing group with glue tank pressure rollers edge feeder Hnsdogipk Ajpfx Ag Nsu end-cutting unit for front and rear vertical cutting of the excess edge n.2 motors trimming unit with overlapping motors for trimming the upper and lower part of the excess edge . n.2 motors tilting trimming unit for the final upper and lower trimming of the excess edge . n.2 motors glue scraper group for cleaning glue residues overlapping brush group for brushing and polishing the applied edges . n.2 tiltable motors Compressed air 7-8 bar Weight kg 1700

Condition: repair required (used), Year of construction: 2010, Edgebanding machine Manufacturer: Brandt Model: O KDF 220 C Year of manufacture: 2010 Edge thickness: 0.4 - 3 mm Hsdpfew Hcdrex Ag Nsnu Workpiece thickness: 8 - 50 mm Total length: approx. 4,150 mm Feed speed: 10 m/min Total power: 9.5 kW Weight: approx. 1,150 kg Pre-milling unit: Yes End trimming unit: Yes Flush trimming unit: Yes Corner copying unit: Yes Radius scraper: Yes Flat scraper: Yes

Condition: used, Year of construction: 2018, Used machine GM020.0050 AKV 3005 DK - F Year of manufacture: 2018 Specification: 8 mm 1st milling station: Combination Pneumatic 3-point adjustment Hsdpfx Agew Nif Ho Nonu Cleaning station Corner rounding cutter Radius scraper station incl. lift Surface scraper PLC control incl. touchscreen Interchangeable tanks Nesting Glue discharge 60 mm workpiece thickness (joining and corner milling) Spraying device for panels Edge protection spraying Short workpieces

Condition: like new (used), Year of construction: 2022, operating hours: 5 h, functionality: fully functional, feed rate X-axis: 9 m/min, total length: 3,700 mm, workpiece height (max.): 50 mm, height adjustment type: mechanical, input voltage: 400 V, tank capacity: 1 l, Automatic edge banding machine with lower glue pot for hot melt adhesive (EVA), feed chain conveyor, jointing and trimming unit, and corner rounding unit Feed speed: 9 m/min Panel thickness: 50 mm Edge thickness (rolls): 3 mm Edge thickness (solid wood strips): 5 mm Chain feed Pre-milling and jointing unit Corner rounding unit Unit adjustment via edge pieces Simple and intuitive operation Machine features: - Display: 7” color touchscreen - Capability to work with storable programs - Graphic interface shows the processing outcome directly on the panel - Single-click selection of desired processing mode Interchangeable glue pot: - 6 heating elements ensure consistent, even glue temperature - Motorized glue application roller with internal electric heating element - Teflon-coated glue pot for quick and thorough cleaning - Quick-change device allows fast and simple replacement of the glue pot - Glue pot capacity: 1 kg - Depending on glue type, two different temperatures with automatic standby function can be set Tool kit R = 2 mm - Fast changeover between processing modes: thin edge, radius, solid wood strips - 2 high-frequency motors, 200 Hz, 12,000 rpm - Flush trimming unit with multi-profile tool for thin edge and radius (solid wood) - Nesting - Scraper unit - Surface scraper Buffing unit: - The machine is equipped with a buffing unit Cleaning spray aggregate: - Electronically controlled spray function - 2 spray nozzles (top and bottom) and fluid reservoir Hodpfxow Dq Hce Ag Nsnu LED interior lighting: - LED interior lighting allows safe adjustment of units even in low ambient light

Condition: used, OTT Pacific V12 - Edgebanding SPS-compatible control with LCD display Pre-milling unit with plunge control Fully automatic roll magazine / crosscut shear High-speed gluing station Automatic pressure unit Pneumatic trimming 0-10° Flush milling/chamfer milling 15/30/45° - 8 mm Radius milling R-2, R-5 Corner rounding Hedpfow Nqg Esx Ag Njnu Radius scraper Surface scraper - will be converted to Schwabbel unit Soundproof cabin with central extraction Machine is WORKSHOP OVERHAULED in VERY GOOD CONDITION Available from stock Lieboch

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, ASSEMBLY UNIT PROGRAMMABLE ASSEMBLY FENCE 0-5MM AUTOMATIC MAGAZINE FOR EDGE BANDING ROLLS AUTOMATIC MAGAZINE FOR SOLID EDGES Hodpfx Agjv I Saye Nenu CUT-OFF KNIFE FOR EDGE BANDING ROLLS PROGRAMMABLE PRESSURE ZONE WITH 1 PRE-PRESSURE AND 5 POST-PRESSURE ROLLERS GLUING UNIT, FLUSHABLE FOR PU ADHESIVE LINEAR CUTTING UNIT, SWIVELABLE FLUSH MILLING UNIT 2X1.9 KW RADIUS MILLING UNIT RADIUS SCRAPER COPY MILLING UNIT WITH 2 MOTORS SURFACE SCRAPERS TOUCHSCREEN CONTROL PANEL EDGE THICKNESS UP TO 20MM MACHINE LENGTH 7.90 M

Year of construction: 2016, condition: good (used), functionality: fully functional, The KS AluKap Duo is a machine designed for the production of aluminium profiles for roller shutters with interlocked curtain slats. It automatically cuts the profiles to the required length, assembles them into a curtain, and secures them. A key function of this machine is its capability to perform several operations simultaneously: cutting profiles to size, joining them to form the roller shutter curtain, and locking (interlocking) to prevent shifting after installation. Electrical connection: 3.5 kW, 400 V, 50 Hz. Shutter width: min. 500 mm – max. 3,500 mm. Label printing (optional): 36 x 89 mm. Machine transport is the buyer’s responsibility. We offer assistance with loading. Hnjdpew Dm Hrsfx Ag Neu

Condition: new, Year of construction: 2025, Joining unit: Yes Edge thickness: maximum 3mm Workpiece thickness: from 8mm - 50mm Workpiece width: minimum 110mm Glue basin: granular, quick change basin cross-cut shear: yes cross-cutting / flush sawing: yes Milling station: chamfer / radius corner copying: yes Flat - scraper: yes Hnsdpfx Agek Eai Ue Nsu Radius scraper: Yes Buff: Yes Non-stick spray unit: Yes Infeed ruler adjustment: manual workpiece thickness adjustment: manual power input: 5 kW machine length: 3314 mm Machine width: 1085 mm Weight: 545 kg

Condition: used, Year of construction: 2005, Used machine GM020.0029 Year of manufacture: 2005 AKV 3005 DK-F 8 mm version 1st milling station: Combination Cleaning station Corner rounding cutter Jointing cutter Hsdpfx Agow In R Eo Njnu Surface scraper with extraction Profile scraper Chassis Pneumatic milling adjustment SPS control Preparation for interchangeable tanks

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Year of manufacture: 2011 Total connected load: 7 kW Jointing milling unit: 2 x 1.1 kW 12,000 rpm Edge gluing End trimming shear End trimming saw unit Flush and radius milling unit Radius scraper blade Edge thickness: 0.4 – 3 mm Hsdpfx Agew Rxfxs Nonu Workpiece feed: 9 m/min Workpiece thickness min./max.: 8–45 mm Extraction connection: 120 mm Including operating manual Dimensions: 320 x 90 x 160 cm Weight: 560 kg

Condition: used, Holz Her Sprint 1317-1 FÜ + PU heavy-duty design – edge thickness 0.4 – 5 mm SPS screen control large LCD display pre-milling unit before gluing area fully automatic edge magazine for coil and strip material glue application station for cartridges + PU gluing maximum edge height 51 mm automatic glue height adjustment press unit 1913, motorized pneumatic trimming unit for coils and strips with pneumatic adjustment for miter saw angle from 0–10° multifunctional milling unit 1942 MOT 2 milling unit with motorized adjustment axes for various radii – chamfering – flush milling via SPS Hnedpfewtz T Sex Ag Nsu copy milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm scraping unit for chamfers and radii pneumatic infeed and outfeed finish – surface scraper regular maintenance by Holz Her machine is FACTORY SERVICED, in EXCELLENT CONDITION available from stock in Lieboch

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, edge thickness (max.): 20 mm, controller model: IMATRONIC 121/01, TECHNICAL DETAILS Hnedpfoxf Ewvjx Ag Nju Edge thickness, coil: 0.3 – 3 mm Edge thickness, strips/sheared pieces: 0.8 – 20 mm Panel thickness: 8 – 60 mm Motorised chain feed from below (variable): 6 – 30 m/min MACHINE DETAILS Electronic control: IMATRONIC 121/01 EQUIPMENT Levelling unit with NC adjustment 08.376: (4.5 kW × 2 at 9,000 rpm) Edge heating lamps: 1.5 kW × 2 Glue unit 283.1513: (hot-melt glue + preheater) with NC adjustment Glue unit 08.42: (0.66 kW × 2 at 12,000 rpm) Profiling group 08.0555: (1.85 kW × 2 at 12,000 rpm) Multifunctional unit 08.348: (0.66 kW × 2 at 12,000 rpm) Corner copy routers 08.519 Glue scraper group 08.50 Brushing unit 08.612: (0.25 kW × 2 at 1,500 rpm) Unit 08.181: (4.4 kW × 1 at 6,000 rpm) Belt sanding unit 08.062: (1.8 kW × 1 at 3,000 rpm) Upper pressure system with motorised rubber belt Entry fence with NC adjustment Pressure zone Roll holder with 1 roll Automatic end trimming tool change (cross system)

Condition: used, Year of construction: 1980, Edge thickness: maximum 20mm Workpiece thickness: from 8mm - 60mm Workpiece width: minimum 60mm Glue application: cartridge Cut-off shears: yes Milling station 1: flush Infeed guide adjustment: manual Hnjdpowm Nrisfx Ag Nju Workpiece thickness adjustment: manual Power consumption: 7kW Machine length: 2.8m Machine width: 1.2m Weight: 800kg

Condition: used, Hebrock K34 PLC control with 15" touchscreen Pre-milling unit for joining before the gluing part (3 mm) Glue pot with removable pot and glue outlet device Max. edge height 60 mm Cross-cutting unit Milling unit for flush/radii/bevel trimming Corner rounding unit for radii/bevels Multi-radius scraper (R1/R2) Nesting Surface scraper Release agent spray device Year of manufacture 2023, 52 operating hours Hnedowtfvkopfx Ag Nou Machine is in mint condition From carpentry liquidation / retirement from carpentry

Condition: used, OTT Tornado - TOP Control - via a 15-inch color touchscreen monitor for full automation and maximum ease of use CM-CombiMelt gluing system suitable for processing EVA and PUR hot melt adhesives as well as all common cleaning granules Joining unit for joining chipboard Automatic roller magazine Automatic edge magazine Double end mill with automatic tilting 0° / 3° Flush milling unit - for flush milling - 12mm Fine milling RADIUS - radius milling - profile knives R2 - R5 Automated copy milling - corner rounding Scraper unit - radius Scraper unit - radius - chamfer Surface scraper unit Lubricant spray device - PU Cleaning set with fine buffing unit Very stable workpiece support with roller conveyors - FRONT with scissor extension Complete tooling included Machine is in EXTREMELY MINT CONDITION WELL-MAINTENANCE Hnjdpfxjwcymco Ag Nou First commissioned in 2011, very few operating hours, approximately 1200 Machine from lease / leasing option from Lieboch warehouse

Condition: used, functionality: fully functional, Edge thickness 0.4 – 3 mm SPS screen control Fully automatic edge magazine Fully automatic roll magazine – cross-cut shears Hnedpfx Aew Igg Sjg Nsu Cartridge + PU gluing station + automatic dosing nozzle Workpiece height 6 – 45 mm End trimming unit swivels at 0 and 10 degrees Flush, bevel, and radius milling, swivels up to 15 degrees Profile scraper Buffing unit Soundproof cabin CE version Machine is FUNCTION-TESTED and in GOOD CONDITION ex works

Condition: used, OTT Atlantic Hnjdpfsw Np Dpex Ag Nju SPS-based control system High-speed gluing unit Automatic roll and edge magazine Automated swivelling flush-trimming unit Flush milling Chamfering and radius milling Scraper unit Finish buffing unit All units are controlled via SPS from the operator panel Soundproof enclosure with integrated central extraction The machine is WORKSHOP-TESTED and FULLY FUNCTIONAL Ex stock Lieboch, net €3,000.00