Used Cts for sale (641)

Condition: used, CTS Type: CS-70/350 Water-cooled Test chamber volume: 350 liters Test chamber dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Temperature operating range: Temperature range: -70°C / +180°C Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Climate operating range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% RH Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 - ±0.3 K over time Humidity deviation: ±1 - ±2% RH over time up to 90% RH Max. ±1 - 3% RH over time above 90% RH Electrical connection: 400V +6-10%, 3/N, 50Hz Connected load: 13 kW Rated current: 25.5 A Refrigerant: R404A / R23 Weight: 650 kg For your security as a buyer, please note the following information! Ibsdpsziyw Eefx Am Djc The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We will be happy to answer any further questions you may have by phone.

Condition: used, CTS Type: C-70/600 CTS C-70/600 climate testing chamber air-cooled version with observation window, test specimen protection, and documentation Ibsdpfx Amsy Hkazo Djc For sale is a high-quality CTS climate testing chamber, type C-70/600, for precise temperature and climate testing in research, development, quality assurance, and industry. Technical data: Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Rated power: 8.7 kW Rated current: 14.8 A Protection class: IP 22 Refrigerant: R404A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment / Features: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Test specimen protection / temperature limiter Water connection / demineralized water supply Test chamber and condensate drain Pipe penetrations on the side of the test chamber RS232 interface according to documentation Digital outputs for test specimen control Test chamber dimensions according to documentation: approx. 850 x 850 x 830 mm External dimensions according to documentation: approx. 1900 x 1115 x 1850 mm Weight according to documentation: approx. 600 kg Scope of supply: CTS climate testing chamber C-70/600 including existing documentation / operating instructions Scope of supply as shown in the pictures For your safety as a buyer: The unit can be inspected by arrangement. Loading with a forklift can be arranged. For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have on the phone.

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Ibjdpfx Amsy Hkd He Dsc Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, CTS Climate Testing Chamber Type: C-70/1000-S CTS Climate Testing Chamber / Environmental Simulation Chamber Model: C-70/1000-S Water-cooled version For sale is a high-quality CTS climate testing chamber for precise temperature and climate testing in research, development, quality assurance, and industry. The unit is in used condition. See images for visual condition. Control panel, viewing window, and test specimen protection are included. Temperature and Climate Data: Test chamber volume: approx. 1000 liters Temperature range: -70 °C to +180 °C Temperature change rate: approx. 2.5 K/min (heating) Temperature change rate: approx. 2.5 K/min (cooling) Humidity range: 10 % to 98 % RH Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data: Electrical connection: 400 V / 3/N / 50 Hz Ibedpfey Iam Hex Am Dsc Rated power: 9.7 kW Rated current: 17.9 A Protection class: IP 22 Refrigerant according to nameplate: Pre-cooling stage: R404A – 2.3 kg Cooling stage: R23 – 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment / Features: CTS control panel with LCD display Digital setpoint and actual value display Program operation Viewing window in the door Stainless steel test chamber Test specimen protection / temperature limiter Interior lighting Side cable glands Glands approx. 50 mm and approx. 125 mm RS232 interface according to documentation Digital outputs for test specimen control Mobile version on rollers Dimensions according to layout plan: External dimensions: approx. 2245 x 1270 x 1950 mm Installation dimensions: approx. 2350 x 1290 x 2000 mm Weight of test chamber: approx. 1000 kg Documentation: Declaration of conformity available Test certificates available Operating manual available Layout plan available Quick start guide available For your security as a buyer: The following steps can be carried out in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Scope of delivery: CTS Climate Testing Chamber C-70/1000-S Documentation as available Scope of delivery as shown in the pictures Condition & Notes: Condition: used Inspection possible by arrangement. Loading via forklift can be arranged. Changes, prior sale and errors in the technical data are subject to change. If you have any questions, please do not hesitate to contact us.

Condition: used, CTS   Type: CS-70/600-5/S   CTS climate testing chamber CS-70/600-5/S water-cooled version with observation window, test specimen protection and documentation   For sale is a high-quality CTS climate testing chamber, type CS-70/600-5/S for precise temperature, climate and stress screening tests in research, development, quality assurance and industry.   The device is in used condition and can be viewed in its entirety according to the images. Current display: Manual operation / Warning (sludge removal of the water bath).   Operating hours according to the display: Total operating hours: 19,788 hours Compressor cooling: 8,699 hours Compressor pre-cooling: 11,432 hours Circulation pump: 2,905 hours   Technical data:   Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Temperature change rate heating: approx. 11.95 K/min Temperature change rate cooling: approx. 5.47 K/min Test chamber volume: 600 liters   Electrical connection: 400 V 3/N 50 Hz Rated power: 18.4 kW Rated current: 30.6 A Protection class: IP 22   Refrigerant: R404A / R23 Pre-cooling stage: R404A – 5.0 kg Cooling stage: R23 – 2.1 kg / 14.5 bar CO2 equivalent: 19.61 t / 30.93 t GWP: 3922 / 14800   Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar   Equipment / features:   Observation window in the door Stainless steel test chamber CTS touch panel / LCD control panel digital control with program operation Test specimen protection / temperature limiter Water-cooled refrigeration unit Humidity system with water bath automatic water replenishment possible Interfaces (RS232 / Ethernet possible according to documentation) integrated control cabinet Industrial version   Pipe penetrations according to installation plan: 1x penetration DN 50 2x penetration DN 125   Test chamber dimensions according to installation plan: Ibodpfx Amey H Hmwj Dec approx. 850 x 850 x 830 mm   External dimensions according to installation plan: approx. 1900 x 1120 x 1875 mm   Weight / mass according to documentation: approx. 750 kg   Scope of supply:   CTS climate testing chamber CS-70/600-5/S including existing documentation / test certificates Scope of supply as shown in the pictures   For your safety as a buyer: The device can be inspected by appointment. Loading with a forklift can be arranged.   For your safety as a buyer, please note the following information!   The following points can be carried out in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerants 3. Leak test with certificate 4. Documented test run after successful inspection   Condition: used   (Subject to changes and errors in technical data!)   We will be happy to answer any further questions by telephone or message.

Condition: used, CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Iedsy Hkgbjpfx Am Debc Application areas: Material tests Aging tests Electronics and component testing Temperature shock and cycle temperature tests Technical data: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Equipment / Features: CTS control panel with touch display Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display 2-zone system (hot and cold chamber) Automatic carriage for shock tests Technical design: Hot and cold chamber separated Carriage system for rapid temperature change Test chamber made of stainless steel Insert shelf / grating Viewing window in the door Water cooling connections available Control cabinet integrated Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Other data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: see pictures (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Type: TS -70/1000-10 For sale: CTS temperature test chamber, model TS -70/1000-10. Cooling: water-cooled refrigeration unit. Compressor has been replaced! Features: Multi-touch control USB and Ethernet interfaces Feedthroughs for test cables, 4 × Ø 125 mm Safety temperature limiter Application areas: Environmental and durability testing Temperature cycling tests (stress screening) Quality assurance and research & development Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: Ibedpfx Ameziizye Doc Height approx. 1000 mm, width approx. 860 mm, depth approx. 1100 mm External dimensions: Height approx. 1950 mm, width approx. 1270 mm, depth approx. 1900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are reserved!) We will be happy to answer any further questions you may have by telephone.

Condition: like new (used), CTS 2,500 L Vertical Vat / Mixer with Double Jacket and Agitator – Stainless Steel Industrial vat / vertical mixer CTS with a capacity of 2,500 liters, equipped with a double jacket for thermal treatment and an agitation system, designed for the preparation, mixing, heating, and homogenization of food products in industrial batch processes. The equipment combines a large-capacity vertical vessel with a motorized agitator and a double jacket, allowing mixing and thermal treatment operations to be performed on the product in a single unit. Its 2,500-liter capacity, stainless steel construction, and bottom discharge make it a particularly interesting solution for plants that process large volumes of product. MAIN FEATURES -Manufacturer: CTS -Capacity: 2,500 liters -Type: Industrial vertical vat / pot / mixer -Vertical configuration -Double jacket for thermal treatment -Integrated agitation system -Agitator with motorized drive -Mixing and homogenization of product -Stainless steel construction -Large-capacity vessel -Curved bottom -Bottom product discharge -Discharge valve -Robust support structure -Integrated control panel -Designed for industrial batch processing -Integrable into food production lines PROCESS The 2,500 L CTS is designed to receive the ingredients and mix them using the internal agitation system. The double jacket allows for the thermal exchange necessary to heat or maintain the product temperature, depending on the conditions and services available in the installation. The agitator keeps the product moving during the process, promoting uniform distribution of the ingredients and temperature. Once the cycle is complete, the product can be discharged through the outlet located at the bottom. It can be used for the following operations: Mixing and homogenization Heating Cooking, depending on the process Iodpezbi Rmefx Am Debc Temperature maintenance Formulation preparation Dissolution and incorporation of ingredients Preparation of sauces, creams, and purees APPLICATIONS Particularly suitable for canning industries, sauce manufacturers, prepared meal producers, vegetable product manufacturers, puree, cream, and filling manufacturers, and other food industries that require a large-capacity processing vessel with agitation and thermal treatment. The combination of 2,500 liters, double jacket, agitator, and stainless steel construction provides a versatile solution for industrial preparation and mixing processes. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Description: CTS climate test chamber CW-60/6 -60°C to +120°C 6,000 liters (6 m³) Temperature range: -60 °C to +120 °C Temperature deviation: ±0.5 to 1 K over time Heating: 1 K/min from -40 °C to +80 °C Cooling: 1 K/min from +80 °C to -40 °C Temperature range: +10 °C to +95 °C Humidity range: 10% to 85% relative humidity In dew point range: +5°C to +89°C Temperature deviation: ±0.5 K over time Humidity deviation: ±1 to ±3% r.h. over time Dimensions: Internal dimensions: Volume: approx. 6,000 liters (6 m³) Ibsdpfx Aeygr E Rsm Djc Approx. internal dimensions: Height: 2,000 mm, Width: 2,000 mm, Depth: 1,500 mm

Condition: used, CTS Type: CTS CW+40/7/7 Walk-in climate chamber CTS walk-in climate chamber, 7 m³ Temperature and humidity testing, 40–90°C Description: For sale is a CTS CW+40/7/7 walk-in climate and temperature test chamber in an industrial design. The system is used to simulate defined temperature and climate conditions for testing materials, components, and technical systems under realistic environmental conditions. Temperature and humidity can be precisely controlled, and constant or programmed test cycles can be run. Due to the high air circulation, uniform climate distribution is achieved throughout the test chamber. The walk-in design allows testing of large components or complete systems. Technical data: Manufacturer: CTS – Clima Temperatur Systeme Type: CW+40/7/7 Serial number: 113011 Year of manufacture: Design: Walk-in climate test chamber Test volume: 2 × 7 m³ Electrical data: Power connection: 400 V / 3N / 50 Hz Rated power: 29.6 kW Rated current: 45.8 A Climate data: Temperature range: +40 °C to +90 °C Humidity range: 10 % to 90 % relative humidity Dew point range: +30 °C to +87 °C Protection class: IP44 Internal dimensions: Width: 1400 mm, Depth: 1300 mm, Height: 2250 mm External dimensions of the complete system: Width: 3511 mm, Depth: 2765 mm, Height: approx. 2515 mm (total) Further technical data: Sound pressure level: 56 dB(A) Cooling: Water-cooled Heating: Stainless steel heating element Ibsdjylmamopfx Am Dec Interior: Stainless steel Exterior: Coated steel sheet (RAL 9010) Air circulation: Radial fan Control: 32-bit controller with LCD Interfaces: RS-232 / RS-485 Program and cycle operation possible Safety temperature limiter & emergency stop available Refrigerant: R404A Weight: approx. 2000 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 34/1998, type of input current: three-phase, input voltage: 380 V, total length: 21,300 mm, air demand: 34 m³/h, Complete used packaging and palletizing line, perfectly integrated and operational, ideal for granular, powdery, and similar products (soil, fertilizers, peat, nutshells, and bulk materials for agricultural and industrial use). The system includes all process stages: 16 m³ peat hopper with clod-breaking devices, 0.8 x 13 m conveyor belt, Loro & Parisini hammer mill model M66 (30 kW), 10 m³ feed hopper, 0.8 x 14 m feed belt for the bagging machine, ESSEGI bagging machine model CTS 80 (serial no. CTS 80 34/98, year 1998, 11 kVA) with forming tubes for 10-20-45-70 liter bags, ESSEGI bag compactor, TMG palletizer model SIRIO 1S80 (serial no. 2.500.12.98, year 1999, 14 kVA), ROBOPAC wrapping machine model AVR 201/ATS with rotating arm, pre-stretch, and top anti-drip function, rotating pallet discharge platform with roller conveyor, dust extraction system, electrical systems, and compressed air system (compressor excluded). Ibodpfxjz E Dagj Am Dsc The system is already operational, previously purchased and used by the company for producing bags ranging from 10 to 70 liters, and is in good overall condition. Estimated capacity is 350–500 bags/hour, depending on the product and format. Photos, layout drawing, and further technical documentation are available upon request. Price negotiable. The entire system is being sold as a complete unit.

Condition: excellent (used), CTS Temperature testing chamber T-55/1000 Li, water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z, refrigerant R404A/R23 The type designation of the CTS chamber series is as follows: e.g., Type T -55/1000/Li 1) T means: Temperature 2) -55 means: lower temperature -55°C 3) 1000 means: 1000-liter test chamber volume 4) Li means: special equipment for testing with lithium-ion batteries Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for customer-specific control of the test item Test chamber lighting: energy-efficient, bright LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with max. rack load 100 kg 1a Conduit NW50 1b Conduit 2x NW125 1c Conduit 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Thermal compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test item, without thermal compensation and without additional equipment. Options can affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, Width, approx. 860 mm, Depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, Width, approx. 1270 mm, Depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at a distance of 1 m from the front) Weight approx. 1000 kg Heat dissipation to the installation room 10.4 kW Refrigeration unit: water-cooled, low-noise, fully hermetic stepless power adjustment by electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have on the phone. Iodpfxjzg Ty Uo Am Dsbc

Condition: used, Year of construction: 2021, operating hours: 733 h, JCB 8008 CTS mini excavator, manufactured in 2021, with only 733 operating hours! ----* Manufacturer: JCB * Model: 8008 CTS * Year of manufacture: 2021 * Recorded operating hours: approx. 733 * Operating weight: 950 kg * Includes 2 x buckets * Adjustable undercarriage * Good condition * Video available upon request (WhatsApp Erik) * Price: 9,500 euros, net + 19% VAT Ibjdpfez R Hzfsx Am Dec ----For further questions, please call: Erik Kortum: WhatsApp All information is provided without guarantee. Errors and prior sale are subject to change.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, operating hours: 15,000 h, pressing force: 225 t, stroke length: 200 mm, operating speed: 10 mm/s, reverse speed: 115 mm/s, table length: 4,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, 1 used 7axis Bystronic Xact Smart 225/4100 down stroke hydraulic cnc pressbrake for sale The Bystronic Xact Smart 225/4100 is a high-precision, industrial hydraulic down-stroke CNC press brake designed to deliver high-quality Swiss bending technology at an accessible price point. It is engineered for handling heavy-duty, versatile sheet metal fabrication with consistent accuracy across its entire bed length. Key Technical Specifications The standard configuration of the Xact Smart 225 model includes the following core mechanical specifications: Pressing Force: 225 tonnes (2250 kN) for high-capacity heavy bending. Ibodpfsz D D Syex Am Dec Bending Length: 4100 mm (4.1 metres), providing ample room for long components. Standard Stroke: 200 mm  Operational Features & Versatility Axis Configuration: Configured with 5-axis back gauge, total axis; 7 (Y1,Y2X, X1, R, Z1, Z2). Age: 2019 Crowning System: Features active, hydraulic, or automatic static crowning to counteract beam deflection, guaranteeing strict angle consistency over the entire 4-metre bed length. Intuitive Software: Controlled through Bystronic’s User Interfaces, utilizing a large multi-touch screen that handles 3D simulation  Delivery and installation in your works available

Condition: used, Year of construction: 2021, operating hours: 623 h, JCB 8008 CTS mini excavator, manufactured in 2021, with only 623 operating hours! ----* Manufacturer: JCB * Model: 8008 CTS * Year of manufacture: 2021 * Operating hours: approx. 623 * Operating weight: 950 kg Ibjdpfoz Exnlox Am Dec * Includes 3 buckets * Extendable undercarriage * Good condition * Video available upon request (WhatsApp Erik) * Price: 9,500 Euros, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp All information is provided without guarantee, subject to errors and prior sale.

Condition: used, Year of construction: 2007, operating hours: 2,000 h, power: 283 kW (384.77 HP), Equipment: air conditioning, cabin, * Engine manufacturer: John Deere Equipment: Air conditioning, straw chopper, cutterbar carriage, hillside compensation, onboard computer/monitor, throughput control, yield measurement, reel horizontal adjustment, hydrostatic drive, reversing device, cutterbar, loss measurement Ijdoil Hadjpfx Am Djbc Shaker with JD625R cutterbar with a working width of 7.60m, transport trailer, and rape seed table ENGINE IS MAKING NOISE.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 50 h, functionality: fully functional, DROP AG is selling a demonstration machine from its demo center: a digital laser exposure system, Phoenix 1213V CtS, with a maximum screen size of 1200 x 1300 mm. 2540 dpi with PDF vector option – 12700 DPI. 30-watt laser with 405 nm laser. 4° DMD technology with TILT software. Iedpfx Amow T Sfks Dobc Inline option; the system can also be loaded manually. Suitable for screens with a frame thickness of up to 60 mm.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Glass tempering machine for thicknesses from 3.8 to 19 mm. Maximum glass dimensions: 2440 x 4500 mm. Ijdpfx Asx Trg Aom Dsbc

Condition: used, Year of construction: 2016, operating hours: 1,015 h, If you are interested, please call or send a message via WhatsApp, Telegram, or Viber. Iodpsz Effwsfx Am Djbc

Condition: used, This listing for a 1 of 2 BD Max PCR Machine BD MAX System is intended for in vitro diagnostic (IVD) use in performing FDA cleared or approved nucleic acid testing in clinical laboratories. It is capable of automated extraction and purification of nucleic acids from multiple specimen types, as well as the automated amplification and detection of target nucleic acid sequences by fluorescence-based PCR. The BD MAX System is capable of: Independent nucleic acid extraction and purification with built in extractor. PCR amplification using thermal cycling across 24 lanes Real time detection of products of amplification Identification of each Sample Buffer tube by external barcode reader Work List verification by internal barcode reader Fluorescence detection at up to five wavelengths, allowing multiplex reactions by Cycle threshold (Ct) call, or multiplex reactions by melt analysis Qualitative, quantitative and melt sample analysis Features: Integrated and fully-automated extraction and thermocycling steps Processes and analyzes up to 24 specimens per run On-board lysis and extraction with pre-filled reagent strips Real-time PCR with two 24-lane microfluidic PCR readers Dedicated multi-color optics including: 475/520, 530/565, 585/630, 630/665, 680/715 Consistent results through standardized workflow and protocols Rapidly expanding menu and open-system options to help address emerging testing needs Less than one minute of hands on time per sample Electrical Requirements 100 to 240 V, 50/60 Hz, 10 A, 300 VA Max Dimensions: Weight 250 lb. Depth 28.5 in. Height 37 in. Ibjdjxzgw Aspfx Am Doc Width 29.7 in.

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 922006, electrical fuse: 16 A, input voltage: 400 V, power: 1.1 kW (1.50 HP), Imperator II – Multi-chamber divider Isdjzibdyepfx Am Dsbc GB 100-600G / 400-2,900 G Continuously adjustable, 150-2,900g (depending on dough consistency) Machine belt, belt width 280mm Discharge height 810mm Thanks to the hydraulic spring and the multi-measuring chamber, the IMPERATOR CT II offers the optimal combination of dough handling and weight accuracy. Removable components such as the discharge belt, measuring piston, and flour spreader simplify cleaning. We have used the machine for breads of 500 grams and 1,000 grams (dry weight). The machine can be tested on site. Sale ex works (EXW): DE 75015 Bretten (near Karlsruhe)

Condition: excellent (used), axle configuration: 3 axles, first registration: 02/2009, loading space length: 8,200 mm, loading space width: 2,500 mm, loading space height: 2,800 mm, color: other, Year of construction: 2009, Equipment: tail-lift, = Additional options and accessories = - Rear doors - Tailgate = More information = Iodpfx Aoz Sd N Dom Debc Tail lift: dhollandia DHSV20, slider lift, 1500 kg Technical condition: very good Visual appearance: very good Registration number: CW306HJ = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), mileage: 367,836 km, power: 88 kW (119.65 HP), first registration: 10/2015, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: air conditioning, power mirror, = Additional options and accessories = - 3 chairs - Side door = More information = General information Number of doors: 4 Year of construction: 2015 Cab: single Registration number: 2GGC752 Technical information Engine capacity: 1.598 cc Front axle: Steering Rear axle: Double wheels Weights Empty weight: 2.489 kg Carrying capacity: 521 kg GVW: 3.010 kg Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Ibedpfx Amsz S Ugxe Djc Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), mileage: 79,873 km, power: 180 kW (244.73 HP), first registration: 02/1994, fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of seats: 2, loading space length: 4,440 mm, loading space width: 2,460 mm, loading space height: 600 mm, Equipment: crane, Crane Number of hydraulic extensions: 2 Number of manual extensions: 1 Number of support legs: 2 Load Hook: ✓ = More information = General information Number of doors: 2 Year of construction: 1994 Cab: single Registration number: 3081UI Axle configuration Front axle: Steering Rear axle: Double wheels Functional Crane: PALFINGER PK10500B4, year of manufacture 1991, behind the cab Tipper: Left / Right / Back Environment Emission class: Euro 0 Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Ibjdpfxoz S Nwro Am Djc = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), power: 98 kW (133.24 HP), gearing type: automatic, fuel type: diesel, color: other, Year of construction: 2006, operating hours: 4,870 h, GVW: 23.000 kg Quick coupler system: Yes Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. Iodpoz It T Ijfx Am Dobc No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A