Used Cut And Drill for sale (23,805)

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) Crodevpalaopfx Aphjd ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: excellent (used), Year of construction: 2012, · V200 Plate drilling machine (executed with a VD40 drilling unit and an X-Y coordinate table). · VTC 8/40 tool changer (8 places). · Hydraulic numbering unit VN 1/16 · Deburring unit VDB 2 (each hole is automatically deburred). Max. length 1.400 mm* Max. width : 1.000 mm Min/max. thickness : 3 - 60 mm Crodpfxewphgdo Aphjd Capacity : : 600 kg * Longer lengths (max. 2 400mm) possible by automatic repositioning.

Condition: used, Year of construction: 2006, Web height min 80mm. max 1220mm. Flanges height min 42mm.max. 600mm. U channels min. 80mm 1200mm Flanges height min.45mm max 300mm. Angles min. 80x80x8mm max.300x300x50mm Flats min.100mm max.1220mm Square tubes min.80x80mm max.600x600mm Rectangular tubes min. 80x40mm max.1200x600mm Positioning weight max. 15000Kg Linear weight of the section to be handled max. 750Kg/m Carriage speed max. 30m/min. No. of drill heads 3 - two horizontal Drill Heads with single spindle - one vertical Drill Head with single spindle Max. drilling diameter 50 mm. - with tapered adaptor No.4 Max. thickness that can be drilled 75 mm. Spindle rotation motor per head (a.c.) 15 kW Spindle R.P.M. (with continuous adjustment by program) RPM 180 - 3000 Positioning stroke to suit the gauge line :- vertical drilling unit 20 to 1200 mm.- horizontal drilling units 10 to 600 mm. TOOL CHANGE - number of tools change devices n. 3 - number of tools to be changed n. 6 - adaptor size ISO 45 Model 1260 BH for sections cold sawing : Csdpfxjx N Icle Aphjrd - sawing capacity at 90° min. 80 x 10 mm - sawing capacity at 90° 1250 x 600 mm - sawing capacity at 45° 800 x 600 mm - sawing capacity at 60° 500 x 500 mm - sawing band motor 11 kW - sawing speed 20÷100 m/min. - band size 67 x 1.6

Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Single Rotating Spindle. 18 metres In- Feed Rollers. 12 metres Out- Feed Rollers. Pincher Unit Feed. Crsdpfx Aoig T Amsphed Infeed Cross Transfers. Outfeed Cross Transfers. 750mm Capacity. Sawing Capacity: Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Maximum capacity with vertical jaws 700 X 500 mm. Round cut capacity with 45 degree turn, 450 mm. Rectangular cutting capacity with 45 degree turn, 450 X 500 mm.

Condition: excellent (used), Year of construction: 2009, Year 2009 VOORTMAN V600 CNC SINGLE SPINDLE DRILLING MACHINE with 5 station automatic tool changer. 18 metres length, drilling capability 16.3 metres. Profile Capacity 35mm -1050mm. Cjdpfx Apew D Uqfshsrd Drill capacity 8mm-40mm.

Condition: excellent (used), Year of construction: 2013, Vernet HD-X 618 / HBP 410/723 G CNC Drilling / Sawing Line – Year 2013. 3 Spindle Drill. 16.5 metres In-Feed. 14 metres Out-Feed. Pusher Unit Feed. Milling / Slotting. Solid Carbide Tooling. Credpfxsx Rut Ts Aphsd Small parts conveyor. 4 way Scribing. In-Feed Cross Transfers. Out-Feed Cross Transfers.

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 HBE 320/523 G SAWING MACHINE. Effective cross-section (mm): 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 310x300 Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Compressed air: • Minimum pressure: 6 bar Crsdpey R Tk Rjfx Aphsd • Maximum flow rate: 3 Nm³/h Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling 230-ton shear Feature Mobile hydraulic shear Straight cut Average cutting time: approximately 2 to 2.5 seconds Capacities: HEB 140 IPE 300 IPN 280 Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Flat bars 300x20

Year of construction: 2010, condition: good (used), Main Technical Specifications Profiles to be processed • Max. section volume mm 1100 x 1100 • Bar length max. metres 12 Drilling Capacity • Drill heads no. 1 • Spindles per vertical drill head no. 1 • Drilling diameter max. mm 31.75 • Drilling diameter (with reduced feed) max. mm 40 Crjdpfoig T Axjx Aphjd • Power per head (a.c.) kW 5,5 • Program controlled spindle rotation speed with continuous variation RPM 180 - 1000 Other Specifications • X axis positioning speed (portal) mt/min. 20 • Y axis positioning speed (drill head) mt/min. 4

Year of construction: 2007, condition: good (used), ■ V600 Drilling machine (moveable drilling cabinet, executed with 1 horizontal drilling unit and automatic tool changer) ■ Drilling table with power rail length 15 metres, effective length 12 metres ■ Hardware and software (includes VACON 110 machine control) Crsdeq Hgg Uopfx Aphjd ■ Safety devices (safety bumpers) ■ Year of construction 2007

Condition: used, Year of construction: 2014, functionality: fully functional, ■ Infeed roller conveyor (length 6m, width 2000mm, roll diameter 159mm, roll distance 800mm, capacity 1250kg/m, including liftable datum line) ■ V320-2000 Plate processing system (base frame with vertical drilling unit, automatic tool changer and automatic discharge table) ■ Feeder trucks (servo driven, master truck with 3 hydraulic clamps, support truck with 2 hydraulic clamps) ■ Swarf brush (automatic swarf removal after drilling operations) ■ Oxy-fuel cutting torch (1 pcs, with automatic height control IHT M4000 Cap) ■ Plasma cutting unit Hypertherm HPR260XD (1 pcs, automatic gas console, complete with cutting parameter database) ■ Fume extraction unit Donaldson DFPRO6 ■ Product conveyor belt ■ Outfeed roller conveyor (length 3m, width 2000mm, roll diameter 159mm, capacity 1250kg/m) ■ Hardware and software (including VACAM ‘Machine Edition’, VACAM ‘Office Edition’) ■ Safety devices (safety fencing, light curtain, light curtain muting) ■ Year of construction 2014 Technical specifications Operating range V320-3000 Min. / max. plate length 850 – 6.100 mm Min. / max. plate width 200 – 2.050 mm Min. / max. plate thickness 6 – 75 mm Max. capacity 7.500 kg Material Mild steel Drilling unit VD40 Automatic tool changer 10 positions Feed Synchronous driven servomotor, servo-inverter Spindel rpm Step less 0 – 2.500 rpm (servomotor) Nominal power 30 kW Lubrication Internal and external by mist of air / oil Tool holder SK 40 Drill diameter 5 – 40 mm Thread tapping M6 – M24 Centre point marking possibility Yes Countersinking possibility Yes Layout marking possibility Yes Hydraulic clamping Yes Cedpsy E Nxgsfx Apherd Plasma cutting unit HPR260XD Max. thickness 64 mm Max. pierce capacity 38 mm Dross-free cutting max. 32 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / Air (99,9% pure clean, dry, oil-free) Cutting speed 6 mm Approx. 4.035 mm / min 130A 12 mm Approx. 3.060 mm / min 200A 25 mm Approx. 1.660 mm / min 260A 50 mm Approx. 590 mm / min 260A 64 mm Approx. 195 mm / min 260A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. Oxy-fuel cutting unit Type Nozzle mix Automatic height setting Yes Gas supply Magnetic valve with back-fire protection Ignition Automatically Max. thickness 75 mm Gas Propane Optional gas Acetylene Cutting gas O2 Operating direction From left to right General information Voltage stabilizer Not included Current Transformer Not included Ambient temperature 0 – 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)

Condition: used, Year of construction: 2008, FICEP Tipo B 251 sheet metal processing center Year of construction 2008 - sheet metal processing center - Plate size max. 6000x2500mm - 1 drilling unit - 6-fold changer incl. marking tool - 1 punching unit (currently without function) - 12-fold tool changer for punching tools - Conveyor belt for finished parts - Hypertherm HPR 260 plasma source - Donaldson Torit DCE extraction system Crodpfx Apoy E N Dpshjd - Machine weight according to manufacturer approx. 23 tons Main Technical Specifications Plate specifications on infeed side: • Length max. mm 6000 min. mm 2500 • Width max. mm 2540 min. mm 500 Work piece specifications on outfeed side: • Length min. mm 200 • Width min. mm 150 Punching Capacities (on 400N/mm² plates) • Punching force kN 1000 • Maximum stripping force kN 100 • Maximum hole diameter in punching mm 100 • Max. diameter on 20 mm thickness mm 38 Other Specifications : • Thickness of the large plate min. mm 6 • Thickness of the large plate (punching operations) max. mm 25 • Thickness of the large plate (thermal cutting) max. mm 32 • Thickness of the large plate (drilling operations - with optional device) max. mm 100 • Positioning weight max. kg 5000 • Linear weight of the large plate max. kg/m 750 • Max. vectorial traverse speed max. m/min. 30 • Cross positioning speed m/min. 40 • Working level’s height mm 1100

Condition: used, Year of construction: 2014, ■ V304 plate cutting machine capable of processing plates up to 1.500mm x 3.000mm ■ V304 plate processing machine (including gantry beam 2.500mm and side trucks) ■ X-rail (5.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) Cjdpfxsy E Nyko Aphjrd ■ Plasma cutting and extraction table (1.600mm x 3.090mm, 1 pcs) ■ Plasma cutting unit Kjellberg HiFocus280i (1 pcs) ■ Torch suspension for plasma cutting unit (including IHT M4000 PCS automatic height control) ■ Carriage for cutting unit (motor driven, including laser pointer, 1 pcs) ■ Kemper fume extraction unit 81 0550 090 (including spark trap 1 pcs) ■ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module) ■ Safety devices (safety bumpers, emergency stop cord) Technical specifications PLASMA CUTTING UNIT HIFOCUS 280i Material Mild steel, stainless steel, aluminum Min. thickness 3 mm Max. thickness 70 mm Max. pierce capacity 40 mm Dross-free cutting max. 35 mm Automatic height setting Yes, IHT M4000 PCS Marking lines Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / air (99,9% pure clean, dry, oil-free) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.100 mm / min 90A 12 mm Approx. 3.200 mm / min 160A 25 mm Approx. 2.000 mm / min 280A 40 mm Approx. 720 mm / min 280A 50 mm Approx. 400 mm / min 280A 70 mm Approx. 150 mm / min 280A * Grounding max. 6m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. COLOUR Plates RAL 3003 Red Frames RAL 7011 Grey GENERAL INFORMATION Working height 700 mm (+/- 20 mm) Voltage stabilizer Not included Ambient temperature 0 – 35°C max. 95% relative humidity

Condition: used, functionality: fully functional, Year of construction: 2008, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 6 metres x 1 metres Capacity. Credpfx Ajy E N Hdephed Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Hypertherm Plasma. Kemper Extraction Unit

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Crodpfohwhfuex Aphed The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, total width: 1,000 mm, total length: 2,200 mm, total height: 2,500 mm, Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 6 - Y-axis travel [mm]: 1000 - Table length [mm]: 1300 - Table width [mm]: 600 Crsdpfxjwnilxs Aphsd - Drilling depth [mm]: 150 - Drilling capacity [mm]: 32 - Max. Reach [mm]: 1000 - Min. spindle speed [rpm]: 30 - Max. spindle speed [rpm]: 2650 - Transport dimensions: 2200mm x 1000mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need for additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Crodpfx Apjhwrk Tshed Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: good (used), Year of construction: 2004, total height: 500 mm, overall weight: 500 kg, total width: 800 mm, rotary table diameter: 180 mm, table load: 200 kg, Metal cutting Tooling Crjdpfx Aozhlb Hephod Nikken - CNC180 MACH-ID 9663 Make: Nikken Type: CNC180 Control: ULTIMAX Year: 2004 Table Ø: 180mm Table load:200 Length: 1200mm Width: 800mm Height: 500mm Weight: 500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment Special drilling machine for stair construction, window construction, and universal applications through pneumatic height adjustment. Angled dowelling and picket drilling can be easily achieved thanks to the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with practical handle switch Precision chuck with two inserts 16mm and M10 thread Table size approx. 1100 x 240mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowelling on two levels without readjustment The desired drilling heights can be set for each drilling level with a handwheel and digital counter; switching is then done pneumatically from the front Crossfeed approx. 320mm, stepless or in a 12mm grid Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, can be placed at the front and rear of the table 2 swiveling workpiece supports 2 side stops, also usable as a front support Undercarriage Dust extraction connection 80mm 4 used but good drill bits 9, 12, 16, 19mm Few paint spots have been repaired, very good condition, see original photos A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200mm (LxWxH), weight 310kg. Codpfx Apoyfta Tehjrd The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: like new (used), functionality: fully functional, Cyklos GMP 450 Ril machine in excellent condition with a foot pedal! Crsdpfx Ajzgf H Hjphsd All of the equipment mentioned is not for sale/resale in Russia, or any country that is subject to an EU embargo.

Condition: good (used), Grinding machine, drill sharpener, drill grinding machine, drill sharpening device Credpfx Apezhl A Djhjd -Manufacturer: LLC, Drill grinding machine type Drill Doctor 750XI -Grinding range: approx. 2.5 mm - 19.0 mm -Apex angle: 118° - 140° -Voltage: 230V 50Hz -Speed: 14000 rpm -Sanding roller: Ø 23.3 mm -Case dimensions: 350/290/H145 mm -Weight: 2.7 kg

Condition: good (used), Drill press, drill press, stand drill, pillar drill Crodpfsfunydsx Aphsd -Manufacturer: WMW, column drilling machine type CM 10S/55 -Motor: 630 W -Speeds: 460 - 2190 rpm -Translation: via V-belt -Table size: 220 x 280 mm -spindle taper: MK1 -Spindle stroke: 70 mm -Projection: 200 mm -Pillar Ø: 85 mm -Dimensions: 400/800/H1670 mm -Weight 206 kg

Condition: used, Scharmann drilling machine Available from September Year of manufacture: June 1965, original purchase price: 267,045 DM Cjdjzilmrjpfx Aphjrd Travel ranges: Longitudinal (X): 1,600 mm Vertical (Y): 1,200 mm Transverse (Z): 1,150 mm Spindle speed: 20 – 6,000 rpm Table size: 1,200 × 1,400 mm Table load capacity: max. 6 t

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, 5-axis traveling column milling machine MFS with 840D Siemens control. Crodpfx Apsy Rgt Eohod Travel ranges: 13200 x 3000 x 1200

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING Credpfx Ashwaapephed

Condition: new, functionality: fully functional, Year of construction: 2026, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Crjdpfx Aohwaa Eephod Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING