Used Cutterheads for sale (196)

Condition: used, Year of construction: 1985, Dimensions of the thickness planer table (L x W): 500 x 800 mm Overall length of the surfacing tables: 2,200 mm Working width: 500 mm Maximum material removal: 8 mm Working height min./max.: 3 / 235 mm Feed rates: 7.5 / 15 m/min Cutterhead diameter: 120 / 4 mm/knife + 2 scoring knives Rotational speed: 5,000 min-1 Motor power: 5.5 kW Manual thickness planer table adjustment via handwheel Gkjdpfjz Agd Ssx Al Soc Setting gauge

Condition: used, Year of construction: 1982, Planing width: 500 mm Table length: 2840 mm Cutterhead speed: approx. 5000 rpm Adjustability of the fence: 0 - 45° Motor power: 5.5 kW Dust extraction port: 160 mm Machine weight: approx. 950 kg including: toothed table lips Godpfxsz Agu Do Al Sekc console for feed hydraulic adjustment of the planing table NEW planer guard

Condition: excellent (used), Leadermac LMC 423 S, four-sided planer - max planing width: 23cm - max planing height: 13cm - electric raising for feed beam with rollers - feed roller in table + pump with sliding fluid - chrome-hardened tables - complete set of spiral cutterheads - all spindles adjustable vertically and horizontally - bottom spindle 5.5 kW, right and left spindles via one 7.5 kW motor, top spindle 7.5 kW Gsdpfexixu Nox Al Sokc - all motors with brake - stepless feed speed adjustment Weight: 2,200 kg, machine length: 3.3 m. Machine in very good condition, ready for operation.

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW Gkodpfjwvqklox Al Sjc • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: excellent (used), Bäuerle -2-knife cutterhead -Cutting width 41cm -Adjustable fence, swiveling -Total table length 221cm -Includes fence with adjustable stop Gkodpfx Alshu Haxs Soc -Includes 2 replacement knives 3 new V-belts Robust and heavy-duty thickness planer. Inspection and test run possible by appointment.

Condition: new, CASADEI PFS 520 TERSA jointer-planer, Holzkraft CASADEI With a 520 mm planing width, motorized thickness table adjustment, and convenient setting changes. Stable steel cast iron construction. Large, ribbed jointer tables made of cast iron. Smooth operation due to high weight. Four feed speeds. Motorized thickness table travel with two speeds and digital display. Pressure bar in the infeed. Precision-bearing four-knife cutterhead. Helically toothed steel feed roller for particularly smooth and gentle wood feed. Feed roller with rubber coating. Large jointer fence, adjustable from 90 to +45°. Comes standard with auxiliary fence. Powerful industrial motor. Pneumatic quick-change system with pneumatic raising and lowering of the jointer table. The connection point for dust extraction is always in the same location, both during jointing and planing, eliminating the need for additional dust extraction hoses or cumbersome repositioning around the machine. You will receive the 3-year Stürmer guarantee for this item upon online registration. The guarantee applies only to end customers in Germany and Austria. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Technical data & features: Dimensions and weights: Length (product) approx.: 2300 mm Width/Depth (product) approx.: 1100 mm Weight (net) approx.: 980 kg Jointer: Total length of tables: 2300 mm Infeed table length: 1200 mm Jointer table width: 520 mm Working height: 930 mm Chip removal max. jointer: 6 mm Jointer fence length: 1200 mm Jointer fence height: 190 mm Swivel range jointer fence: 90 – 45° Dust extraction connection: Dust extraction nozzle diameter thickness: 120 mm Installation information: Space requirement length: 2300 mm Gjdpfeu T Hq Sox Al Sskc Space requirement width/depth: 1610 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length: 1235 mm Machine body width/depth: 850 mm Working area length: 1000 mm Working area width/depth: 3500 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thickness: Thickness table width: 520 mm Working height thickness min.: 3.5 mm Working height thickness max.: 250 mm Chip removal max. thickness: 8 mm Electrical data: Power of drive motor: 7 kW Connection voltage: 400 V Mains frequency: 50 Hz Planer cutterhead: Cutterhead type: TERSA Cutterhead diameter: 120 mm Number of planer knives: 4 Cutterhead speed: 5000 min⁻¹ Planer width max.: 520 mm Feed: Feed speed: 5/8/12/18 m/min

Condition: new, Welcome to Maschinenhandel Knipfer We would be happy to arrange a viewing of the machines on our premises by appointment. Since there is not always someone on site, please call or send a message in advance. ━━━━━ New machine from an authorized dealer, available immediately! Nikmann FS 41 N Spiral Surfacing and Thicknessing Planer Fully equipped! MBM spiral cutterhead! Please also check our other listings, as we sell the entire range of Nikmann machines. - MBM spiral cutterhead with 66 cutters, 15x15x2.5 mm, with Hoffmann Garant torque wrench - Planing width 41 cm - Thicknessing height 23 cm - Solid cast iron tables! (Both surfacing tables fold up simultaneously) - Weight 450 kg - Mechanical counter with 10/mm for thicknessing - Motor: 5.5 kW with motor brake Gkodpfxslcbk Ij Al Soc - Adjustable surfacing fence with degree scale - Surfacing table length 180 cm - Cutterhead diameter 100 mm - Bevel-toothed steel feed roller - Solid surfacing fence, guided on rollers on the surfacing table! Optional equipment: - Feed system (190€) ━━━━━ CONTACT & CONSULTATION ━━━━━ Maschinenhandel Knipfer Gewerbegebiet Ost 25a 92353 Postbauer-Heng Your contact person: Johannes Knipfer, Tel.: ━━━━━ IMPORTANT NOTE All information is provided without guarantee. Technical changes are subject to change by the manufacturer. Price changes, prior sale, and printing errors are reserved. Prices apply for self-collection. Shipping is possible for an extra charge and by arrangement. Images may show optional equipment that is not included in the price. A forklift for loading is available.

Condition: excellent (used), For sale is a used Hammer A3-41 Silent Power surface planer and thicknesser with a jointer length of 1800 mm. Gedpfx Alswqq Dhj Sekc The machine has been checked by our specialized staff and is in very good condition. Technical data: - Silentpower spiral cutterhead - Planing width 410 mm - Jointer length 1800 mm - Max. clearance 230 mm - Motor power 4 kW / 5.4 HP - Suction connection Ø 120 mm - Year of manufacture 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, thickness planer, planer, jointing, thickness Reference: R-A0117

Condition: excellent (used), Catalog number: 7715 TECHNICAL DATA - Max. width of workpiece: 220mm - Max. height of workpiece: 130mm - 8 spindles: 1) Horizontal, lower: 220mm, 5.5kW 2) Vertical, right: 130mm, 7.5kW 3) Vertical, left: 130mm, 7.5kW 4) Vertical, right: 130mm, 5.5kW 5) Horizontal, upper: 220mm, 11kW – 5th spindle adjustable electrically, up/down 6) Horizontal, lower: 220mm, 5.5kW 7) Horizontal, lower: 220mm, 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal: 220mm, adjustable 360°, 7.5kW - All spindles adjustable, up/down, left/right - Spindle diameter: 40mm – Top: - 6 infeed rollers, double-toothed, pull-type + 1 single - 3 outfeed rollers, pull-type, rubber, smooth, double + 3 single - Meter counter – Bottom: - 1 infeed roller, toothed, pull-type, swiveling in the lower table - 3 metal outfeed rollers, pull-type, smooth - Feed on Cardan shafts - Rollers with pneumatic pressure - Stepless feed speed adjustment + 2 speeds, 10-60m/min - Feed motor: 10kW - Electric adjustment of planing thickness - Body lifting motor: 0.75kW - Central lubrication of the table - Diameter of dust extraction nozzles: 5x140mm, 3x120mm - Machine dimensions (L/W/H): 4680x1780x1850mm - Control cabinet dimensions (on pallet): 1020x1000x2230mm - Weight: approximately 5000kg ADVANTAGES - 8 heads - Universal spindle - Ideal for both wet and dry wood - German production, WEINIG brand - Unpainted Godjzx Rlxopfx Al Sokc - Very few operating hours - Used planer, in perfect condition Net price: 125900 PLN Net price: 29280 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: new, Year of construction: 2026, Motorized thickness table adjustment with two speeds Digital display for working height Thickness table made of cast iron The thickness table is mounted on four large trapezoidal-thread spindles for maximum stability and precision Four feed speeds Optionally available with two rollers in the thickness table Standard with noise and chip protection curtain at infeed and outfeed Adjustable pressure for feed rollers Front infeed roller with helical toothing Outfeed roller with rubber coating Powerful industrial motor Equipment Details TERSA models with Tersa cutterhead Cutter changes in seconds When the machine starts, centrifugal force automatically tensions the blades – self-locking Blade projection adjusts automatically without the need for setting gauges Work Table Gkodpfoy Eg Apsx Al Ssc The work table is mounted on four large trapezoidal-thread spindles to ensure maximum stability under all operating conditions Standard with electric table adjustment A special lifting system ensures the table position is perfectly maintained even without mechanical locking Helical-toothed steel infeed rollers for constant and uniform wood feed Second, rubber-coated outfeed roller Heavy-duty anti-kickback devices prevent kickback of workpieces A 4-knife cutterhead ensures optimal planing results Dimensions and Weights Length approx. 1305 mm Width/depth approx. 1080 mm Weight approx. 750 kg Dust Extraction Connection Extraction port diameter thicknesser 150 mm Drive Performance Main motor 9 kW Installation information Space requirement length 1305 mm Space requirement width/depth 1080 mm Space requirement height 1197 mm Space requirement explanation: Measurements account for maximum travel or usable length. Machine body length 1305 mm Machine body width/depth 725 mm Length 1000 mm Width 2000 mm Working area explanation: Please add stated dimensions to space requirement to obtain the recommended clear installation area for the machine. Thicknessing Thickness table length 630 mm Thickness table width 1000 mm Min. working height 3.5 mm Max. working height 300 mm Min. working length 210 mm Max. cutting depth 8 mm Electrical Data Connection voltage 400 V Phases 3 Ph Current type AC Mains frequency 50 Hz Cutterhead Type TERSA Diameter 120 mm Number of blades 4 Speed 4,500 rpm Max. planing width 630 mm Feed Speed 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - available immediately -

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: AB-216795, functionality: fully functional, planing width: 230 mm, spindle diameter: 40 mm, number of spindles: 5, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Number of spindles: 5 pcs. Min. planing width: 25 mm Max. planing width: 230 mm Min. planing height: 6 mm Max. planing height: 120 mm Infeed table length: 2,470 mm Spindle 1 Spindle type: Bottom Motor power: 5.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Gsdpozxchlefx Al Sskc Spindle 2 Spindle type: Right Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 3 Spindle type: Left Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 4 Spindle type: Top Motor power: 9 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 5 Spindle type: Bottom Motor power: 5.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 140 mm Feed rate: Automatic Min. feed rate: 5 m/min Max. feed rate: 25 m/min Feed rate control: Variable Conveyor motor power: 3 kW Conveyor drive: Cardan shaft drive Diameter of feed rollers: 140 mm MACHINE DETAILS Lubrication system: Manual Diameter of dust extraction nozzle: 120 mm Voltage: 400 V Current consumption: 57 A Fuse rating: 63 A Power: 10 kW Dimensions & Weight Dimensions (L x W x H): 4,150 x 1,650 x 1,750 mm Dry weight: 2,600 kg Transport packages: 1 pc. EQUIPMENT CE marking Documentation Cardan shaft drive Manual lubrication system

Condition: excellent (used), WEINIG HYDROMAT 22 AL four-sided planer - max. workpiece width 220mm - max. workpiece height 130mm - 8 spindles: 1) horizontal lower 220mm, 5.5kW 2) vertical right 130mm, 7.5kW 3) vertical left 130mm, 7.5kW 4) vertical right 130mm, 5.5kW 5) horizontal upper 220mm, 11kW – 5th spindle adjustable electrically up/down 6) horizontal lower 220mm, 5.5kW 7) horizontal lower 220mm, 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) universal 220mm, adjustable 360°, 7.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - from above: - 6 infeed rollers, double-toothed, pulling + 1 single - 3 outfeed rollers, pulling, rubber, smooth double + 3 single - meter counter - from below: - infeed roller, toothed, pulling, pivoting in the lower bed - 3 metal rollers, pulling, smooth - feed on Cardan shafts - rollers with pneumatic pressure - stepless feed speed adjustment + 2 speeds 10-60m/min - feed motor 10kW - electric thickness setting - body lifting motor 0.75kW - central lubrication of the bed - diameter of dust extraction nozzles 5x140mm, 3x 120mm - machine dimensions L/W/H 4680x1780x1850mm - control cabinet dimensions (on pallet) 1020x1000x2230mm - weight approx. 5000kg - Feeder with centering device: - roller width 450mm - 1 toothed pulling roller at the inlet - 22 smooth pulling rollers - adjustable pressure from above Gjdpjzyl T Tefx Al Sjkc - feeder length 9020mm - stepless speed adjustment 10-60m/min - motor 0.75kW - dimensions L/W/H 9020x790x1150mm Net price: 179900 PLN Net price: 41850 EUR, depending on the exchange rate of 4.30 EUR (Prices may change with higher fluctuations)

Condition: used, Year of construction: 1992, with Centrofix cutterhead Machine cleaned, fully inspected Tables measured – adjusted very precisely, max deviation 0.05 mm Test planing carried out Used, good condition, low hours Manufacturer: Maka Type: AH 430 Year of manufacture: 1992 Machine no.: 9201531 GS wood dust tested Motor: 3.0 kW Control panel on top Planing width approx. 430 mm Gkodoxuv Rropfx Al Ssc Infeed table length approx. 1500 mm Outfeed table length approx. 1200 mm Swing guard Slotted/low-noise table lips Number of knives: 4 Centrofix cutterblock Table adjustment via handwheel automatic brake Extraction connection D 140 mm Space requirement approx. 2700 mm x 1200 mm x 1400 mm Weight approx. 800 kg Storage location: 97447 Gerolzhofen, loaded free of charge, unpackaged Handover in as-inspected condition, without any warranty or guarantee.

Condition: excellent (used), Catalog number 7739 TECHNICAL DATA PLANER: - cutterhead width 410mm - 3-knife cutterhead - noise-reducing comb - cutterhead guard - adjustable angle guide - table length 2060mm - both tables adjustable THICKNESS PLANER: - max. thickness of workpiece in thickness planer 240mm - thickness planer cutterhead guard *from top: - pawls - infeed roller, toothed, with twist - pressure rollers - planing roller - pressure roller - outfeed roller, smooth - 2 adjustable rollers in the lower table - main motor 5.5kW - electric brake - electric table height adjustment (up/down) - dust extraction port diameter 120mm - dimensions L/W/H 2060x970x1150mm - weight 660kg ADVANTAGES – Made in Italy – Noise-reducing comb – Unpainted – Excellent condition – Used planer-thicknesser Net price: 22900 PLN Net price: 5326 EUR, depending on the exchange rate of 4.30 EUR Gsdpfezx R Tcox Al Sekc (Prices may vary due to significant fluctuations)

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Gkodpjpq If Djfx Al Soc Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Surface Planer / Jointer, used Working width: 520 mm Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Adjustable fence with angle, size 1500 x 175 mm Motor power: 4.0 kW, 400 V, 50 Hz Cutterhead speed: 5000 rpm 4-knife cutterhead, diameter 120 mm Max. cutting depth: 8 mm Extraction connection: Ø 120 mm Table height: 860 mm Hydraulic table height adjustment with foot pedal Numerical cutting depth display Noise reduction combs on the cutterhead Star-delta starter Emergency stop button CE marked Including all documentation Knife setting gauge NEW drive belts NEW cutterhead bearings NEW planer knives Dimensions (L x W x H): 3000 x 950 x 1100 mm Weight approx. 900 kg Note on used machines: Godpfsy Emf Rex Al Sokc • Errors in technical data and prior sale reserved. • Quoted prices are ex-location, loaded free on truck. • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid in written form. (We will only respond to inquiries with your address and telephone number!)

Condition: used, Year of construction: 1992, with Centrofix - cutterhead variable feed speed 2 x outfeed rollers Cleaned, lubricated, partially overhauled Fully set up, test planed, New parts: digital display, distance rings, infeed mat, connection box Used, good condition, top features Manufacturer: Maka Model: DH 630 A Year of construction: 1992 Machine no.: 9201891 GS-certified for wood dust Motor: 6.7 kW Planing width: approx. 630 mm Planing height: approx. 300 mm Table roller: 1 pc, adjustable Segmented pressure beam Segmented infeed roller 2 steel outfeed rollers Feed rate: 0-21 m/min, stepless Number of knives: 4 Knife system: Centro-Fix reversible knives Digital height display Electrical height adjustment with handwheel for fine-tuning Extraction port D 150 mm Space required: approx. 1200 x 1200 x 1400 mm Gksdpfjxuv N Isx Al Sjc Weight: approx. 1000 kg Location: 97447 Gerolzhofen, ex stock, unpacked Transfer as is, as inspected, without warranty or guarantee

Condition: new, Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, total length of planing tables: 2,850 mm, TECHNICAL DATA Planing width 630 mm Feed table length 1620 mm Feed table length 1170 mm Total table length 2850 mm Cutterblock speed 5000 rpm Extraction nozzle Ø 160 mm chip removal up to 8 mm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 1400 kg TECHNICAL DESCRIPTION Solid German engineering For planing and jointing incl. hollow and pointed joint adjustment for planing width up to 630 mm and max. chip removal up to 8 mm Ergonomic working position directly on the cutterhead PANHANS solid steel cutterblock ø 125 mm with 4 Tersa reversible knives Finely planed machine tables, total table length 2850 mm Top control panel at eye level with digital display of chip removal, current delivery table situation (neutral, hollow or pointed joint), incl. template holder and practical tool tray Electromotive adjustment of the feed table via push-button Hollow and pointed joint adjustment on the feed table Godpfjqffvgex Al Sskc Toothed table lips for noise reduction Dressing fence Adjustable in depth and inclination via single-lever operation, inclinable up to 45°, mounted in extremely smooth-running steel guide Anodized dressing fence ruler Pivoting auxiliary fence 1545 Console for feed unit TXF 1570 bridge guard with hinged cover Mechanical motor brake Automatic star-delta start, motor protection switch Planed in at the factory CE-compliant GS tested

Condition: new, Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), planing width: 410 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, total length of planing tables: 2,850 mm, TECHNICAL DATA Planing width 410 mm Feed table length 1620 mm Feed table length 1170 mm Total table length 2850 mm Cutterblock speed 5000 rpm Suction nozzle Ø 160 mm chip removal up to 8 mm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 870 kg TECHNICAL DESCRIPTION Solid German engineering For planing and jointing incl. hollow and pointed joint adjustment for planing width up to 630 mm and max. chip removal up to 8 mm Ergonomic working position directly on the cutterhead PANHANS solid steel cutterblock ø 125 mm with 4 Tersa reversible knives Finely planed machine tables, total table length 2850 mm Top control panel at eye level with digital display of chip removal, current delivery table situation (neutral, hollow or pointed joint), incl. template holder and practical tool tray Electromotive adjustment of the feed table via push-button Gksdpfxoqk Ulue Al Soc Hollow and pointed joint adjustment on the feed table Toothed table lips for noise reduction Dressing fence Adjustable in depth and inclination via single-lever operation, inclinable up to 45°, mounted in extremely smooth-running steel guide Anodized dressing fence ruler Pivoting auxiliary fence 1545 Console for feed unit TXF 1570 bridge guard with hinged cover Mechanical motor brake Automatic star-delta start, motor protection switch Planed in at the factory CE-compliant GS tested

Condition: excellent (used), Year of construction: 1999, H+K Four-Side Planer & Thicknessing Machine Quadroplan 180 Planing width: 20 - 180 mm Planing height: 5 - 120 mm Infeed table length: 2,100 mm Separate motor for each spindle Upper spindle motor: 5.0 kW Lower spindle motor: 4.0 kW Left spindle motor: 4.0 kW, automatic flow head Right spindle motor: 4.0 kW Max. spindle speed: 6,000 rpm Spindle diameter: 30 mm Max. feed speed: 8 m/min Cardan drive feed Feed motor power: 0.75 kW Total connected load: approx. 18.0 kW, 400 V, 50 Hz Extraction ports: 2 x 120 mm, 1 x 140 mm, 1 x 160 mm Dimensions (L x W x H): 3,370 x 1,330 x 1,500 mm Weight: approx. 1,280 kg Gkjdpfjydmawox Al Sjc Planing height adjustment, motorized with digital display Planing width adjustment, motorized with digital display Pneumatic spindle locking Unpowered outfeed roller Automatic centralized lubrication Automatic star-delta switching INCLUDES 4 reversible knife cutterheads INCLUDES operating manual & circuit diagram CE certified All bearings NEW All drive belts NEW Note on used machines: • Errors in technical details and prior sale excepted. • Prices listed are ex location – free loaded! • Machines have been cleaned and function tested. • All machines are sold as inspected, with no warranty or liability. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!)

Condition: new, Trolley for powerlock system spindle arbors for Weinig Powermat milling machines, length up to 170 mm. Space for 43 HSK 85 powerlock arbors and 7 cutterheads. Godpfjzl N Ufox Al Sokc

Condition: used, Hammer A3-41 jointer-planer combination machine, in very good condition, year of manufacture 2023, 4 kW motor power, 1800 mm table length, 410 mm table width, including spiral cutterhead, 230 mm planing thickness. Price changes, errors, and typographical mistakes reserved. Gjdsx H Udkopfx Al Sjkc

Condition: used, SCM S 630 Heavy-duty thickness planer – for carpentry and timber framing Planing width 630 mm Planing height 300 mm 4-knife safety cutterhead with automatic brake / indicator light Segmented pressure beam – aluminum Grooved steel roller at the infeed Rubber rollers at the outfeed Undertable rollers 7.5 kW main motor Electronic thickness table adjustment – digital/LED Infinitely variable feed rate 6-20 m/min Machine from a vocational training workshop in TOP condition Available from stock in Lieboch Godjz Ay Ttjpfx Al Sokc

Condition: as good as new (ex-display), Exhibition Machine Aluminum format sliding carriage (anodized) with hardened steel guide rods. Kickback protection for thickness planer. Anodized parallel fence with micrometric fine adjustment. Saw blade tilting up to 45° via handwheel. Table opening ø260 mm with under-table extraction. Milling fence 250 mm. Slot mortising table with Westcott collet chuck, Mori safety device. Exchangeable milling spindle with MK4 mount, made in EU! Jointer unit: Table width 410 mm Table length 1800 mm Gedpjwzzguefx Al Sjkc Cutterhead diameter 100 mm Number of cutter knives 4 pcs Cutterhead speed 4500 rpm Motor output 5 kW (S6) (4 kW S1) Thicknessing unit: Thickness capacity min/max 4 – 225 mm Feed speed 8 m/min Spindle moulder: Usable spindle length 125 mm Spindle height adjustment 175 mm Motor output 5.5 kW (S6) (4.5 kW S1) Max. tool diameter: For profiling 250 mm For tenoning 300 mm Spindle speeds 10000/8000/6000/5000/4000/3000 rpm Table openings 260 mm Circular saw: Sliding table length 3000 mm Saw blade diameter min/max 315 mm / 250 mm Tilting range 90° - 45° Max. cutting height 90° / 45° Saw blade 315 mm 103 / 72 mm Motor output 5 kW (S6) (4 kW S1) Weight 1090 kg Slot mortising table: Table size 300 x 500 mm Drilling length 250 mm Drilling depth 210 mm Height adjustment 160 mm

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Technical data: Working width: 630 mm 4-knife planing cutterhead system TERSA, d=120mm: 4,800 rpm Max. chip removal during jointing according to CE: 8 mm Min./max. thickness setting: 3/310 mm Min. workpiece length: 250 mm Feed speed: continuously variable, 6 - 20 m/min. Motor 380 Volt / 50 Hz: 7.5 kW Sound pressure level according to EN 27960: 86 - 90 dB(A) Standard equipment: Thickness table adjustment via 4 trapezoidal threaded spindles Electromotoric thickness table lift with electronic positioning device (input of the planing height via keyboard with electronic display) Electrical system according to CE with magnetic brake Protective switch Gkedpow I U Hmsfx Al Soc Emergency stop switch Safety switch for cutterhead cover Thickness table extension 600 mm Dust extraction port d=150mm Availability: short-term Location: Flörsheim