Four Side Planer

Leadermac 423 S

Condition: good (used), Year of construction: 1999, Four side planer Leadermac Compact 423 S - machine in stock - after the technical review - year of production 1999 - chrome tops - electronic height adjustment TECHNICAL PARAMETERS: - planing width 230 mm - planing height 130 mm - electric adjustment of the left head - electric adjustment of the upper head - electronic height adjustment - five top steel rollers - one upper rubber roller - diameter of the spindles 40 mm 1 lower spindle 5.5 kW diameter 2 right spindle 3 left spindle 7.5 kW 4 upper spindle 7.5 kW - tool diameters 160 and 180 mm - pneumatic clamps - feed on cardan shafts - smoothly adjustable feed 6-20 m / min - 2.2 kW feed motor power - chrome tops - length of the preliminary table top 1980 mm - diameter of nozzles 4x 130 mm Machine dimensions: - length 340 cm Tjdpfx Adegufi Ssisf - width 190 cm - height 200 cm - weight 2200 kg

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024/121/47, saw blade diameter: 420 mm, GRAULE cross-cut and mitre saw Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter 420 mm Saw blade holder 40 mm Cutting height 170 mm, Saw blade tilted to 45°: cutting height 115 mm, cutting length 410 mm incl. the following accessories: 1 pc. Machine can be tilted by hand crank from the rear on both sides from 90° to the left by 45° and to the right by approx. 30° to approx. 60° 1 pc. Carbide circular saw blade 420x3.4/2.4x30 mm 48 WZ neg. for wood Tedpfx Aetwz Tlsdijf 1 pc. Machine stand

Condition: used, Year of construction: 1985, Weight: approx. 3000 kg Dimensions: approx. 3700 x 2000 x 1600 mm Tjdpfx Adevvi Ttoisf Storage location: Nattheim

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° Tedpjhfufgefx Adisf -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Condition: used, Year of construction: 1990, Carriage length: 2800 mm Cutting width at rip fence: 1000 mm Cutting width at crosscut fence: 2800 mm Cutting depth: Scorer: no Saw blade height adjustment: manual / hydraulic Saw blade tilt adjustment: manual / hydraulic Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: Speeds: 4 Motor power: 5.5 kW Motor brake: yes Tedpfx Adoxrbhweief Extraction connection: 80 mm and 120 mm Machine length: 3000 mm Machine width: 1700 mm Weight: 1000 kg

Condition: good (used), Year of construction: 1988, functionality: fully functional, Manufacturer: Okoma Type: UF1S Tsdpfxewh Ug Ij Adisf Year of manufacture: 1988 Engine power: 11 kW

Condition: used, Tenoning machine, tenon cutting machine, tenon hunter, slot rotor, tenon cutting and slotting machine, slot and tenon milling machine -Manufacturer: Festo, tenoning and slotting machine Tjdsf D H E Njpfx Adiof -Type: ZA 101/S -techn. Data: see nameplates/photos -Dimensions: 1675/1545/H1330 mm -Weight: 546 kg

Condition: new, saw blade diameter 420 x Ø 40 mm cutting diameter 170 mm cutting length 410 mm dimensions of saw-blade 420x3,2/2,4x40 mm Tsdpoxabztjfx Adiof turning speeds 3500 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above consisting of: 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

Condition: excellent (used), Catalog number 7289 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 170 mm 6 spindles: 1) Bottom horizontal, 230 mm, 5.5 kW 2) Right vertical, 170 mm 3) Left vertical, 170 mm (spindles 2 and 3), 11 kW 4) Top horizontal, 230 mm, 11 kW 5) Top horizontal, 230 mm, 7.5 kW 6) Bottom horizontal, 230 mm, 11 kW - All spindles adjustable up/down, left/right - Spindles 4 and 5 electrically adjustable up/down - Spindle speed: 8,000 rpm - Spindle diameter: 40 mm - All spindles equipped with electric braking - 6 feed-in, driven, toothed upper rollers, including 1 double - Double exit, driven, rubber-coated upper roller - Double exit, driven, rubber-coated lower roller - Side pressure unit - Feed via Kardana shafts - Pneumatically tensioned rollers - Infinitely variable feed speed: 6–24 m/min - Feed motor: 4 kW - Electric planing thickness adjustment - Body lifting motor: 0.55 kW Todpfx Ajrwmr Nediof - Central table lubrication - Extraction nozzle diameter: 6 × 140 mm - Dimensions (L×W×H): 4,900 × 2,400 × 2,000 mm - Weight: approx. 4,000 kg FEATURES – German-made, WEINIG brand – With 6 heads – Not repainted – Used planer, very good condition Original pictures Net price: PLN 142,900 Net price: EUR 34,000 (based on an exchange rate of 4.2 EUR) (Prices may vary with significant exchange rate fluctuations)

Condition: new, Year of construction: 2024, I sell the new fourside moulder LEADERMAC COMPACT 430, New machine year 2024. Showroom machine ! Configuration 4 spindles: Bottom 7,5 kW / 10,0 HP Right 7,5 kW / 10,0 HP Left 7,5 kW / 10,0 HP Top 7,5 kW / 10,0 HP Feeding speed adjustable 6-24 m/min. Feeding motor 7,5 kW / 10,0 HP + inverter Tjderfud Ispfx Adijf Element width max. 15-300mm Element height max. 10-200mm Alle 4 Spindels 6000 rpm. Schneider Touch-Screen EASYSET Electronic programmer for setting the working width, top spinde, aka working height, and height of the pressure zone. Material pressures for short elements. 3-zone pneumatic pressure system for feeding wheels. Total weight 4000kg. Total power 39 kW / 52 HP Fully working. Available immediately Showroom machine, fully NEW ! Incl. CE and complete Documentation !