Used Ddr Milling Machine for sale (64,831)

Condition: used, Year of construction: 2005, Lot consists of: (1) 4-Axis HMC Bedpfsym Tdzsx Al Iowl Technical Details: X/Y/Z 630 mm, spindle 15,000 rpm / HSK-63-A, A-axis swiveling table, CNC SIEMENS SINUMERIK 840 D.

Condition: used, Year of construction: 2003, x-travel 2.500 mm y-travel 800 mm z-travel 1.250 mm Control Heidenhain iTNC 426 spindle tunring speed 4.000 U/min tool taper ISO 50 table surface area 2.200 x 750 mm max. table load 4.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Automatic universal milling head, 0 and 180 degrees Bjdpfey I Dg Rox Al Iowl Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Bwedpfxsy Idhhe Al Isl Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage Bwsdsy Idfmepfx Al Ijl * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm Bwodpfxoy Iddps Al Isl z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: used, Year of construction: 2007, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table width: 5,500 mm, table length: 2,600 mm, total height: 4,900 mm, total width: 16,200 mm, total length: 9,000 mm, overall weight: 55,100 kg, CNC Floor Type Bed Milling Machine CNC Control Heidenhain iTNC 530 Controlled NC Table 1600 x 1600 mm Table dimensions 5500 x 2600 mm Movement X-axis 8000 mm Movement Y-axis 2100 mm Movement Z-axis 1300 mm Movement W-axis 1000 mm C-axis-swivel of milling head body 360 ° A-axis-swivel of milling head 180° Spindle speed 36 - 6.000 R/min Spindle motor 42 / 30 kW Spindle taper DIN 69871-SK 50 Bwodpsy Egnlofx Al Isl Tools in tool magazine 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Year of construction: 2026, 560 mm 320 mm 400 mm 950x450 mm 1050x320 mm 25-3600 U/min DIN 69871 SK 40 Bwjdjy H N Spopfx Al Iel

Condition: new, Year of construction: 2026, 560 mm Bwsdsy H N Sispfx Al Isl 320 mm 400 mm 950x450 mm 1050x320 mm 25-3600 U/min SK 40

Condition: excellent (used), Year of construction: 2019, Traverses X Y Z: 1524 x 596 x 584mm, Table 1930 x 356mm, Spindle speed 5000rpm, Motor 5.75kW, ProtoTRAK SMX 3 axis control, ISO40 Spindle taper, Bwodpeyynvyofx Al Ijl 127mm Quill Travel, Interlocked guards, Power Drawbar, low Volt light.

Condition: excellent (used), feed length X-axis: 700 mm, feed length Y-axis: 350 mm, feed length Z-axis: 475 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 25 rpm, quill stroke: 100 mm, table length: 1,510 mm, table width: 350 mm, Cincinnati 2MK Horizontal Mill with Universal Vertical Head Bodpfx Aleygk Drs Ijwl Model: 2MK Table Atea: 1510 x 350mm (60” x 14”) Longitudinal Travel: 700mm Cross Travel: 350mm Vertical Travel: 475mm Spindle Taper: 50 INT Spindle Speeds: 25 – 1500 RPM Machine with: Horizontal Arbor & Arbor Support Angular Double Swivel Head

Condition: good (used), Year of construction: 1962, Spindle mounting, vertical + horizontal SK / ISO 40 Angular table clamping surface 700 x 285 mm X-axis travel 500 mm Y-axis 200 + approx. 250 mm Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed speeds 8 - 400 mm/min rapid traverse 1200 mm/min drive power 2,2 kW dimensions L x W x H 1150 x 1050 x 1650 mm Machine weight 1000 kg Accessories / special features: - Vertical milling head, swiveling R/L - Fixed angle clamping table - Feed + rapid traverse in all axes Bsdpfjm Uygvex Al Iswl Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Bodpsrx Rxtefx Al Iowl Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: excellent (used), Year of construction: 1992, 1 used, very well-maintained universal tool milling machine with 3-axis digital readout by HEIDENHAIN and infinitely variable speed adjustment Manufacturer: MAHO, Origin Germany Model: MH 1000 Year of manufacture: 1967 / geometrically overhauled in 1992 / 2006 retrofitted with inverter Bodpfsygctrex Al Ijwl Working area Table size: 1250 x 740 mm Travel range X-axis: 1000 mm Y-axis (vertical): 600 mm Z-axis (cross): 750 mm Manual cross travel of table: 275 mm Working spindle Tool holder, DIN 2079: ISO 40 Quill stroke of vertical spindle: 125 mm Speeds and feeds Speed range: 32 – 1600 rpm, infinitely variable! Feed range X + Z-axis: 10 – 500 mm/min Rapid traverse X + Z-axis: 1.4 m/min Feed range Y-axis: 5 – 250 mm/min Rapid traverse Y-axis: 0.7 m/min Motor power: 5.5 kW Linear measuring system resolution: 0.01 mm Dimensions and weight Dimensions (L x W x H): approx. 2400 x 2400 x 1800 mm Weight: 5500 kg Accessories / Special features: • 3-axis digital readout, HEIDENHAIN VRZ 760 B • Tool holder ISO 40, DIN 2079 • Universal clamping table (can be rotated, tilted, and swiveled) • Infinitely variable speed adjustment with MITSUBISHI A 700 inverter (retrofitted in 2006 with new control cabinet) • Circulating lubrication with oil cooler for the speed gearbox • Headstock with horizontal working spindle ISO 40 • Manual tool clamping with internal thread M16 • Headstock with horizontal working spindle • Central lubrication • Coolant pump Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1990, x-travel 0800 mm y-travel 550 mm z-travel 500 mm table-size 1000 x 630 mm feed range 0- 10.000 mm/min rapid traverse 10 m/min Tool bore ISO 40 turning speed range 20 - 4000 U/min main drive DC 10 kW Bjdsyq Slxopfx Al Iewl CNC control Dialog 11 total power requirement 15 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 3,0x2,5x2,0 m CNC milling machine with Dialog 11 control, housing arround working area and tool change with 30 pos. Machine has been refurbished by FPS in 2010.

Condition: used, Year of construction: 1990, x-travel 0600 mm y-travel 500 mm z-travel 500 mm table-size 500 mm feed range 2- 10.000 mm/min rapid traverse 10 m/min Tool bore ISO 40 turning speed range 0- 6300 U/min main drive DC 8 kW CNC control Dialog 11 total power requirement 23 KVA weight of the machine ca. 5050 kg Bedsyq Sk Uopfx Al Iewl dimensions of the machine ca. 3,0x2,5x2,0 m CNC milling machine with Dialog 11 control, housing arround working area, rotary table as a 4th axe and ATC with 40 Positions. Machine has been refurbished by FPS in 2010.

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Bodpfx Alsuv Hrde Iswl Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. Bwsdoh U Nvkopfx Al Ijl SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Bwedpfeu Dahnox Al Iol Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Bodpfx Alsr Hr Are Ijwl Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 smarT.NC option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 Bodsw U Tlzjpfx Al Ijwl K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: used, Year of construction: 2019, x-travel 660 mm y-travel 406 mm z-travel 508 mm Control MAX5 distance spindle /table 102 - 610 mm table surface area 762 x 406 mm T-slots (number x width x distance) 3 x 18 H8 x 100 mm table load 682 kg spindle tunring speed 12.000 U/min spindle drive 11 kW torque 61 Nm tool taper SK 40 number of tool places 20 Pos. tool diameter 89 mm Tool diameter with free secondary positions 127 mm tool length - max. 250 mm weight of tools 7 kg spindle hours ca. 1.664 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: Bsdpsy Ihbrjfx Al Ijwl - Electronic handwheel - Synchronous thread cutting - Internal coolant supply 20 bar Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2009, travel -x axis 2.500 mm travel -y axis 1.000 mm travel -z axis 1.250 mm control HEIDENHAIN - iTNC 530 turning speed range 20 - 4.000 U/min with NC rotary table 1.000 x 1.000 table surface area 2.700 x 850 mm numbers of positions in the tool changer 40 tool taper SK50 CNC Bed Type Milling Machine | SORALUCE - TA-25-A equipped with NC-rotary table, radio measuring probe and 40-way tool changer. The machine is in good condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Bwsdpfsy E Txwex Al Iel #Tags: A25A | TA-25 A | TA 25 A

Condition: used, Year of construction: 2015, travel -x axis 3.000 mm travel -y axis 1.500 mm travel -z axis 2.000 mm control HEIDENHAIN - iTNC 530 turning speed range 0 - 6.000 U/min with NC rotary table 1.600 x 1.400 mm workpiece weight 12.000 kg Bwjdpoy E Txqjfx Al Isl numbers of positions in the tool changer 40 tool taper SK50 CNC Bed Type Milling Machine - Universal | MTE - RT-3000 equipped with integrated NC-rotary table , ITC (20 bar), radio measuring probe and 40-way tool changer. The machine is in good condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: RT30 | RT 30

Condition: used, Year of construction: 2012, travel -x axis 8.000 mm travel -y axis 2.600 mm Bjdpfx Ajy E Txkol Ijwl travel -z axis 1.500 mm control HEIDENHAIN - iTNC 530 turning speed range 20 - 5.000 U/min numbers of positions in the tool changer 60 tool taper SK50 clamping plate 10.000 x 2.500 mm CNC Milling machine | SORALUCE - FP-8000 equipped with radio measuring probe, 60-way tool changer and clamping plates. The machine is in good condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FP8000 | FP 8000

Condition: used, Year of construction: 2005, x-axis 4000 mm y-axis 2500 mm z-axis 1600 mm w-axis 800 mm Control Heidenhain iTNC 530 table-size 1800 x 2200 mm table load capacity 20 t In our opinion, the machine is in good used condition and can be inspected under power by appointment. Bwodpfx Aljy Hxp Rj Iol Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!