Used Ddr Smalcalda Drilling Machine for sale (64,642)

Condition: used, GÜHRING Drill Bit Grinding Machine Type SS 15 Spiral Drill Bit Grinding Machine Serial No. 909 Year of manufacture: approx. 1977 Maximum drill diameter: 40 mm Grinding wheel diameter right: 300 mm Grinding wheel diameter left: 250 mm Grinding wheel width: 40 mm Grinding spindle speed: approx. 2800 rpm Motor power: approx. 2.2 kW Electrical connection: 380 Volt, 50 Hz - Point angle steplessly adjustable - Point thinning device - Gear motor for vertical oscillation in front of cup wheel - Diamond dresser holder Fododzp Tbjpfx Apwspg - Various drill holders - Coolant system Required space (L x W x H): 1200 x 950 x 1550 mm Weight: approx. 1150 kg

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR Fedpeywtxbsfx Apwjpg For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 16 kW (21.75 HP), input voltage: 380 V, input current: 63 A, type of input current: three-phase, travel distance Y-axis: 1,300 mm, workpiece length (max.): 60 mm, number of axes: 3, actuation type: electric, overall weight: 2,750 kg, Equipment: CE marking, documentation/manual, GO! 1300M CNC DRILLING LINE MACHINE OPD201001 Go! Spindle Motor 5.5 kW – ER32 (Manual) OPD201100 Go! Boring Unit – 17 Tools Capacity OPA0032 AES Wop CAD/CAM Program OPA0710 HSK F63 ER32 Tool Holder Fodpsy Nyypofx Apwepg OPD201900 Go! Seaway Packaging System OPD201831 GO! HMI – English Interface

Condition: used, bore capacity in steel (diameter) 32 mm throat 325 mm bore stroke 170 mm Fedpfx Aoy N D I Dspwjpg taper MK 4 MK table-size 570 x 480 mm feeds 0,1 - 0,16 - 0,25 mm/U turning speeds 60 - 1600 U/min total power requirement 2,9 KW weight of the machine ca. 0,65 t dimensions 1,2 x 0,8 x 2,15 m Pillar drilling machine with: - Feed - Variable spindle speed - Coolant pump - Machine light

Condition: used, Year of construction: 2005, bore capacity in steel (diameter) 30 mm throat 275 mm bore stroke 100 mm taper MK 4 MK table-size 420 x 340 mm feeds nein mm/U turning speeds 80 - 2000 U/min total power requirement 0,9 / 1,45 KW weight of the machine ca. 0,22 t dimensions 0,85 x 0.6 x 1,9 m Pillar drill with: - Variable spindle speed - Digital speed display - Digital depth display - Forward/reverse rotation Fodpfey N D Iqsx Apwjpg

Condition: used, bore capacity in steel (diameter) 32 mm throat 325 mm bore stroke 170 mm taper MK 4 MK table-size 570 x 480 mm feeds 0,1 - 0,16 - 0,25 mm/U turning speeds 60 - 1600 U/min Fpedpfxjy N D Iks Apwsg total power requirement 2,9 KW weight of the machine ca. 0,65 t dimensions 1,2 x 0,8 x 2,15 m Pillar drilling machine with: - Feed - Variable spindle speed - Coolant pump - Machine light

Condition: used, Year of construction: 1990, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 140 mm taper MK 3 MK table-size 380 x 360 mm feeds über Handrad turning speeds 85 - 1100 U/min total power requirement 1,3 KW weight of the machine ca. 0,27 t dimensions 0,95 x 0,6 x 1,92 m Pillar drill with: - Feed via handwheel - Spindle speeds via belt drive Fjdpfx Apsy N D Hyjwopg

Condition: ready for operation (used), Year of construction: 1995, Drilling capacity St 60/GG 22: 40/50 mm Thread cutting St 60/GG 22: M 36/M 45 Clamping area of the table: 600 x 1800 mm Height adjustment of the boom: 450 mm Fsdpfx Ajy I Ua Ijpwepg Min./max. drilling radius: 305/1305 mm Spindle taper: SK 40 Quill stroke: 200 mm Infinitely variable spindle speeds: 15 - 2800 rpm Infinitely variable feeds: 5 - 2000 mm/min Spindle drive, frequency controlled: 5.5 kW Electrical connection: 400 V, 14 kVA Weight: 3400 kg Space required: 3800 x 2000 x 2500 mm

Condition: used, Year of construction: 2018, power: 29.5 kW (40.11 HP), overall weight: 2,160 kg, Due to internal restructuring, we are offering the following machine from our inventory for sale: Description: HDD drilling rig Machine type: Grundodrill 4X Serial number: 4X1826295M Year of manufacture: 2018 Weight: 2,160 kg Engine power: 29.5 kW Maximum operating pressure: 310 bar Length: 3,500 mm Width: 1,200 mm Fsdjy Nmffepfx Apwjpg Height: 1,710 mm Maintenance and service were recently carried out by TRACTO. The unit is in working condition. Interested parties are welcome to submit their price expectations or make an offer. If you have any questions or require further information, please send us a message or give us a call.

Condition: new, Drill grinding machine Make: MOTOM Model: BSM 13 DUO Grinding range 2-13 mm Paintwork gray Areas of application: Grinding cone shell Sharpening Fjdpfx Aoguadnepwjpg relief grinding Scope of delivery: CBN grinding wheel for HSS tools Pliers set from 2-13 mm increasing by 1.0 Plexiglas protective shield

Condition: new, Stylus grinding machine Make: OPTigrind Model: GH 20 T Art.Nr.: 3100125 Condition: new machine Speed: 5.000 rpm Clamping range: 1-12 mm equipped as standard with: -Collets 385E, size 4 / 6 / 8 / 10 / 12 mm -Corundum pot wheel -Diamond Cup wheel -Device for the Regrinding of chisel -Device for the sharpening of cutters -Apparatus for the grinding of twist drills -Manual Fodsc I Tzvjpfx Apwopg

Condition: new, Drill Grinding Machine Make: MOTOM Model: BSM 22 grinding range 8-22 mm (with options up to 25 mm) incl. CBN 200 grinding wheel for HSS tools incl. set of pliers from 8-22 mm increasing by 1,0 mm Fpsdpfxeb Ecp Ae Apwsg

Condition: new, Column drilling machine Make: MAXION Fpeded Hrhvepfx Apwsg Model: UNIMAX 3 TAP Condition new machine Spindle speed (continuous): Area A-80 - 1,440 RPM. Area B 180-3,200 RPM. Standard ALB ear performance: 30 mm equipped as standard with: -infinitely variable speed control -Digital display for speed -Digital display for drilling depth -Thread cutting device -Light machine -automatic tool ejector -Manual

Condition: new, Drill Grinding Machine Fpodpfx Ape Sgi Rjweg Make: MOTOM Model: BSM 13 grinding range 2-13 mm incl. CBN 200 grinding wheel for HSS tools incl. set of pliers from 2-13 mm increasing by 1,0

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: Drilling capacity: 16/20 mm (temporarily up to 23 mm) Morse taper MK 2 Throat depth: 245 mm Drilling depth: 100 mm Fsdpoy Ih Tzjfx Apwspg Column diameter: 82 mm Table size: 220 x 310 mm Motor power: 0.75 kW Spindle speeds: 340-530-900-1530-2400 rpm Weight: 132 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1998, Used machine Year of construction 1998 this machine can be used to drill corner bearings, fanlights and olives on loose or pressed frame wood The scanning is carried out at the rebate, the 8 stops for the corner bearing and skylight, as well as for the set timber and transom are automatically used after the timber has been positioned. The machine has an automatic program sequence with electrical control for the drilling motors, triggered by a safety foot pedal Pneumatic connection R 1/4" 5-6 bar Suction speed 25 m/sec. Suction nozzle diameter 120 mm Electrical connection 0.75 kW Fedpsw Naabsfx Apwepg Space requirement 2950 x 650 x 1100 mm Availability: short term Storage location: Flörsheim

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings Fpsdoxlqxfspfx Apwjg

Condition: used, Year of construction: 1994, functionality: fully functional, throat depth: 1,250 mm, Radial drilling machine Fab. Breda type. R 55-1250 Year of manufacture 1994 Technical details Make: BREDA Type: R 55-1250 Throat: 1250 mm Drilling capacity in steel: 55 mm Drilling capacity in cast iron: 70 mm Tapping capacity in steel: M 50 Tapping capacity in cast iron: M 65 Drill spindle mount: MT 5 Throat: 1250 mm Cross travel of headstock: 930 mm Minimum/largest distance from base plate: 5360 – 1375 mm Vertical travel of the boom: 705 mm Spindle stroke: 310 mm Number of spindle speeds: 12 Spindle speeds: 30 – 1200 rpm Number of feeds: 8 Feeds: 0.06 – 1.0 mm/rev Base plate 2070 x 910 mm Clamping area base plate 1325 x 910 mm Motor power 4.4 kW - 380 volts Dimensions (L x W x H) 2.1 x 1.0 x 2.5 m Weight 3 t Accessories Fodpfx Apov Rpf Sswopg Drilling table 750 x 600 x 550 mm Cooling Hydraulic clamping All information is subject to change. A demonstration is available at any time in our showroom.

Condition: reconditioned (used), functionality: fully functional, Drilling Machine Brand: GSP Model: 407C22 Reach: 2250 mm Drilling capacity (steel): - Normal feed: 70 mm diameter - Slow feed: 90 mm diameter Carriage travel on arm: 1900 mm Drilling radius (min. - max.): 630 - 2500 mm Height (min. - max.): 500 - 1750 mm Vertical arm travel: 850 mm Spindle stroke: 400 mm Spindle speeds: 25 to 1400 rpm Motor power: 6 kW Fpjdpfjy D Hr Ujx Apweg Spindle taper: MT 5

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: AB/222595, total width: 1,950 mm, total length: 2,300 mm, total height: 1,850 mm, empty load weight: 1,240 kg, Equipment: CE marking, MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,300 x 1,950 x 1,850 mm Unladen weight: 1,240 kg Voltage: 400 V Power consumption: 10 A EQUIPMENT Fjdjy Akdxopfx Apwopg CE marking

Year of construction: 1980, condition: ready for operation (used), A Gebrüder Irle CNC large-format deep-hole drilling machine is available. Drilling capacity steel: 40mm, max. drilling depth: 1600mm, drill spindle adjustment: 350mm, vertical drilling unit adjustment: 700mm, power: 30kW, speed: 2940rpm, field range constant power: 1-3, armature range constant torque: 1-35, max. drill spindle torque: 1500Nm, rated speed: 163rpm, spindle flange diameter: 200mm, quill diameter: 2000mm. Feed: 500mm/min, rapid traverse: 1200mm/min, max. feed force: approx. 34.3kN, display: 0.005mm, vertical adjustment travel: 700mm, longitudinal adjustment travel: 13000mm, transverse adjustment travel: 650mm, swivel: 85°. Clamping plate dimensions X/Y/Z: 12500mm/1000mm, guide bed dimensions X/Y: 3350mm/455mm, controls: Heidenhain TNC 310. Documentation available. An on-site inspection is possible. Fpodpfxey Rtfzo Apwjg

Condition: not inspected (used), Year of construction: 1987, machine/vehicle number: 5755, functionality: unexamined, drilling depth: 120 mm, rotational speed (max.): 1,125 rpm, rotational speed (min.): 160 rpm, table width: 300 mm, table length: 300 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Speed range: 160 – 1,125 rpm Drilling depth: up to 120 mm Table dimensions: 300 x 300 mm Fodjy D Sydopfx Apwepg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,000 x 500 x 1,800 mm Machine weight: 250 kg FEATURES Vice External reference: 18

Condition: good (used), bore capacity in steel (diameter) 25,0/30,0 mm throat 260 mm bore stroke 120 mm number of spindle speeds 80-1400 min-1 table surface area 410 x 390 mm total power requirement 0,8/1,5 kW weight of the machine ca. 250 kg dimensions of the machine ca. 0,75 x 0,6 x 1,15 m Fpjdpfxouhhzho Apwog

Condition: new, Year of construction: 2022, bore capacity in steel (diameter) 35 mm throat 350 mm bore stroke 180 mm thread dia. M 24 mm feeds 0,1 - 0,2 mm/U spindle turning speed range 100 - 1450 U/min spindle taper MT 4 table surface area 560 x 385 mm Distance spindle/table max. 780 mm distance spindle/base plate 1320 mm voltage 400 V / 50 Hz total power requirement 1,5 kW weight of the machine ca. 0,46 t Fpedpfxsy H Nvbs Apwog dimensions of the machine ca. 1,2 x 0,7 x 2,4 m • with cooling and thread cutting device, • adjustable bore depth with automatical switch-off, • left-/right rotation of spindle, • adjustable chip protection

Condition: new, 40 mm threading in St 60 M24 threading in GG 20 M30 Short spindle MK 3 Center of spindle to wall or column 293 mm Fpsdjyvvm Sjpfx Apwsg spindle turning speed - stepless 160 - 2250 U/min Column diameter 115 mm spindle stroke 120 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117/701 mm feed 0,10 + 0,20 mm/U Motor output 1,45 / 1,9 kW height of the machine ca. 1840 mm weight of the machine ca. 285 kg