Used Defect for sale (1,091)

Condition: used, Year of construction: 1999, Measuring machine, coordinate measuring machine, form tester -Handover: in current condition as viewed -Calculator missing, x-axis damaged (Carriage guide defective) -Manufacturer:Mahr, form tester type MMQ 40 Rcedpeua Nl Ejfx Abujh -Measuring height: 490 mm -Technical data: see photos documentation -Accessories: incl. calibration and measuring accessories / technical documentation, see photos -Dimensions: 700/450/H900 mm -Total weight: 218 kg

Condition: used, mileage: 25,790 km, power: 121 kW (164.51 HP), first registration: 08/1995, fuel type: diesel, overall weight: 7,490 kg, color: red, gearing type: mechanical, number of seats: 9, total length: 6,300 mm, total width: 2,500 mm, total height: 3,050 mm, Equipment: all wheel drive, Vehicle: Mercedes-Benz 917AF // Ziegler Tires 9R 22.5 Uniroyal monopoly T70 * 4x4 drive * Dual tires, rear axle * Mud flaps * Manual transmission, 5-speed * 2 differential locks * Auxiliary drive * Dual tires, rear axle * Gross vehicle weight 7,490 kg -> possible to increase * 9 seats * Rear view camera with separate monitor * Ziegler fire-fighting pump with TROKOMAT + 600 l water tank * Former fire department superstructure with plenty of storage space and compartments from Ziegler * Hose reel * Roof ladder at the rear * Storage box on the roof * Small lighting mast + auxiliary headlights * 5 roller blinds all around * 2 tie-down points at the front * Trailer hitch, 2t We may be able to arrange a cost-effective conversion to a motorhome superstructure with one of our bodywork partners! Vehicles in top condition in our warehouse! Sale on behalf of a customer Note: Please call briefly before your visit? we will ensure that your desired vehicle is on site. If it is not located in Wachtendonk, we will gladly deliver it from our stock. Individual customization possible upon request. Your vehicle partner since 1996. Call or email us now – we look forward to hearing from you! Rjdpozfdacsfx Abujch The information provided in advertisements, on the internet, price tags & images are non-binding descriptions and do not constitute guaranteed characteristics. The seller also accepts no liability for typing and data transmission errors. Listed equipment may need to be checked separately. Errors and prior sale are subject to change. The sale is made excluding any warranty, liability for defects and guarantee. Best regards, Pimenta Automobile

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,827 h, load capacity: 2,000 kg, lifting height: 750 mm, fuel type: electric, mast type: simplex, fork length: 2,400 mm, drive type: Elektro, Low-lift order picker Mast type: Standard Condition: Refurbished, no warranty Technical condition: very good Front tire type: Polyurethane Front tire condition: 80 - 100% Rear tire type: Polyurethane Rcodpfxszif Sns Abush Rear tire condition: 80 - 100% Battery voltage: 24V Battery year of manufacture: 2019 Description: Price includes a new safety inspection (UVV). Only minor paint defects, consistent with the low operating hours. The battery will be regenerated using a power cycler, including a Kappa test. Charger included with appropriate plug. We can arrange cost-effective transport for you. Lease-to-own options are generally available. We are an official Jungheinrich partner. CE certificate.

Condition: used, Year of construction: 1981, sheet width 1020 mm Rjdpfx Absxbtrteuech plate thickness 1,5 mm daylight opening max. 85 mm weight of the machine ca. 240 kg Smallest bending width factor 10 x sheet thickness s Smallest inner radius factor 1.5-2 x sheet thickness s Lowering capability of the lower and bending beams 20 mm On this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring. The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned. The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)!

Condition: good (used), Year of construction: 2002, functionality: fully functional, Bone saw Berkel / Mado MKB 650 16A. 380V. Workshop-tested, defects corrected. Motor brake. Saw blade new. Year of manufacture: 2002 Inspection and test run possible by prior phone arrangement! Cash or advance payment! Rcedpfx Asy Du T Tjbueh Sale only to commercial customers, no warranty, no guarantee.

Condition: used, mileage: 621,495 km, first registration: 04/2018, fuel type: diesel, axle configuration: 6x4, wheelbase: 46,000 mm, fuel: diesel, fuel tank capacity: 550 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro1, suspension: steel-air, Year of construction: 2018, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, crane, differential lock, electric window regulation, fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, trailer coupling, = Additional options and accessories = - Aluminum fuel tank - Heated exterior mirrors - Heated mirrors - Passenger seat Rodpfey T Nb Dsx Abusch - Differential lock - High beam - Speed limiter - Catalytic converter - Automatic climate control - Air suspension - Air-suspended seats - Radio/multimedia system - Rotating beacon - Seat heating - Auxiliary heater - Toolbox - Windshield - Xenon lighting = Notes = Internal inquiry number: 6-110 Volvo FH540 6x4 Epsilon Q150Z Short Timber Body Vehicle is available immediately! Vehicle: Volvo FH540 6x4 Chassis height: HIGH (formerly STD); for exact height measurements, please refer to VBI/WIS (dependent on tire size). Globetrotter safety cab, FH Wheelbase: 4600 mm Emissions according to Euro 6, with SCR, particulate filter, and exhaust gas recirculation Euro 6 compliant emissions Diesel engine 131, 551 HP/405 kW, 2652 Nm with exhaust brake pressure regulator (including engine control for I-Shift) I-Shift AT2612F, automated 12-speed transmission, max input torque: 2,600 Nm Body: Pavic short timber stanchion body with steel front wall 8x EXTE aluminum stakes Note regarding the loading crane: The crane's rack is defective and needs repair (slewing not possible!) Crane: Epsilon Q150Z 9.6 loading crane (Double extension), lifting moment 140 kNm 4 linear levers, 2 pedals Comfort package - Headlights ON/OFF - Engine START/STOP - Engine speed adjustment + - Horn - 1 additional free switch - Seat heating via weatherproof and removable cover - Electrical box with terminal strip mounted on the base frame - Special base frame with 4-point mounting incl. 2 additional brackets - Outrigger plates extended by 170 mm - Grapple saw controls via foot pedal Our sales team will be happy to answer any further questions. This is a non-binding offer. Subject to prior sale, errors and changes. = Further information = General information Application: Forestry Technical information Number of cylinders: 6 Engine displacement: 12,777 cc Axle configuration Front axle: Steered; suspension: leaf spring Rear axle 1: Differential lock; suspension: air suspension Rear axle 2: Differential lock; suspension: air suspension Weights Kerb weight: 15,600 kg Payload: 10,400 kg Gross vehicle weight: 26,000 kg Functional Crane: Palfinger Epsilon Q150Z 9.6, mounted at the rear of the chassis

Condition: ready for operation (used), Heidenhain UV 130 ID: 324 998-03 SN: 8781155A – supplied with test report, professionally fully overhauled and tested, with 3 months warranty, 100% functional, scope of delivery as shown in photos. Please note: Under the exchange procedure, your returned defective unit must not show any mechanical damage, such as cracks or breakage, as these are considered irreparable. In such cases, an additional charge of €500 incl. VAT will apply. You are bidding on a Heidenhain UV 130 Inverter (Exchange Service), overhauled and tested, with 3 months warranty, and delivery scope as depicted. In both repair and exchange procedures, any defective exchange part must be free from mechanical damage; otherwise, a subsequent invoice of €500 incl. VAT will be issued. Rodpfoy Nrnlex Abusch

Condition: used, centre height 250 mm Rjdpfjy Sux Sjx Abuoch weight of the machine ca. 120 kg Reversible clamp with angle scale and three-jaw chuck Dimensions: Chuck diameter 255 mm 60 mm bore Center height 250 mm Base area 350 mm x 400 mm Item Features: Our offers are used items, i.e. can Soiling, storage marks, damage, such as scratches and color defects may also be present. Errors in technical data and description reserved

Condition: used, mileage: 123,572 km, power: 96 kW (130.52 HP), first registration: 01/2019, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 02/2025, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,328 mm, total width: 2,100 mm, total height: 2,254 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, Vehicle not roadworthy due to a defective power steering system!! * Radio * Flatbed body with folding side panels ----* Tire dimensions: 215/75R16C Rcedpfx Aszah Uzsbueh * Fuel tank: 100 liters * Technically permissible total weight: 3500 kg * Unladen weight: 2025 kg * Permissible trailer load: 3000 kg * Overall length: 6328 mm ----Vehicle number/Vehicle: 10299----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will be happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/SP inspection, complete export handling, arrangement of financing, application for export license plates, vehicle transport, and vehicle registration, recovery and vehicle transport.----YOUR VTS TEAM

Condition: like new (used), functionality: fully functional, This is a tray rack from the premium manufacturer Rational, suitable for the iCombi Pro/Classic combination steam ovens, size 20-2/1 GN. This tray rack comes from a training area and has 17 x 1/1 GN inserts with a rail spacing of 74mm and is in almost new condition. The recommended retail price (RRP) including VAT is: €3,184, our special price: €1,725 including VAT. You will receive an invoice with VAT shown separately. Service: We will be happy to assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational appliance model? Ask us, we have access to a wide range of used and new products. We will be happy to advise you on all appliance types. Our used equipment service for you: * 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. * High-quality branded equipment at fair prices. * Professional overhaul/inspection and expert cleaning. * Tested and fully functional - or your money back. * Flexible shipping or self-collection options. * Competent advice - before and after the purchase. * Provision of operating instructions, connection diagrams & spare parts. * Inspection according to DGUV V3. Technical data: * W x D x H: 772 x 1742 x 1013 mm * Clearance from the lowest insert to the oven opening: 118 mm * Clearance from the highest insert to the oven opening: 148 mm * Max. insert height: 1.60 m * 17 inserts * Max. load capacity: 180 kg * Max. load capacity per insert: 30 kg * Design with container locking mechanism * Can be loaded from both sides * Tip protection when pulling out the containers using U-rails * 4 tandem swivel casters (2 with parking brake - metal parts made of stainless steel) * Drainable and removable drip tray * Rail spacing 74 mm Rsdpfx Ajy Aui Ejbuech * Removable handle * Material: Stainless steel * Article number: 60.22.396 Capacity: * 2/1 GN baking and roasting trays 17 x * 2/1 GN grids 17 x * 2/1 GN 20 mm deep 17 x * 2/1 GN 40 mm deep 17 x * 2/1 GN 65 mm deep 17 x * 2/1 GN 100 mm deep 8 x * H6-1/1 (up to 1,800g) chicken - superspike 12 x * H8-1/1 (up to 1,300g) chicken - superspike 12 x * Use of other containers: 2/4 GN, 1/1 GN Condition: used, fully functional Shipping: * Delivery or self-collection by arrangement * Worldwide shipping on request * Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like to request a consultation, or would you like to view something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively subject to our general terms and conditions (GTC).

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: Multiple on request, Continuous Potato Peeling Line – Tong Engineering & Sormac Equipment This continuous potato peeling line combines reliable Tong Engineering handling equipment with efficient Sormac peelers to create a complete solution for high capacity potato processing. Designed for consistent product flow and dependable performance, the system is well suited to processors looking to streamline their peeling operation. The equipment moves potatoes smoothly from cleaning and peeling through inspection, treatment, and final product safety checks. With trusted machinery from Tong and Sormac, this line delivers both efficiency and durability in demanding production environments. Equipment Included Tong Engineering De-Stoner The process begins with a Tong de-stoner, which removes stones, soil, and heavy debris from incoming potatoes. This stage protects downstream equipment and ensures cleaner product enters the peeling process. Two Sormac Continuous Peelers The line includes two Sormac continuous peelers designed for high capacity peeling while minimising product loss. These machines efficiently remove potato skins while maintaining consistent throughput for industrial potato processing operations. Tong Engineering Surge Tank A Tong surge tank regulates product flow between processing stages. This buffer helps maintain a steady supply of potatoes through the system and prevents bottlenecks during production. Tong Roller Inspection Table The Tong roller inspection table allows operators to visually inspect peeled potatoes and remove defects. Rotating rollers spread the product evenly, improving visibility and making quality control easier. Tong Dip Tank with Dosing Unit A Tong dip tank with integrated dosing unit allows potatoes to be treated with anti-browning or preservation solutions. This step helps maintain product appearance and supports shelf life after peeling. Loma IQ3S Metal Detector The final stage of the continuous potato peeling line is a Loma IQ3S metal detector, which checks the finished product for metal contamination and helps meet food safety standards. Key Benefits Complete continuous potato peeling line for commercial processing Combination of Tong Engineering handling equipment and Sormac peelers Rcedoytn H Dopfx Abueh Designed for efficient stone removal, peeling, inspection, and treatment High throughput suitable for industrial potato processing Integrated metal detection for product safety Reliable equipment built for demanding production environments Suitable Applications This equipment is ideal for: Potato processing facilities Fresh produce packing operations Ready meal manufacturers Vegetable processing plants Enquiries If you are interested in this continuous potato peeling line, please get in touch for further information, pricing, and availability. The system offers a dependable solution for large-scale potato processing. Five individual lines available We hold a wide range of new and used food processing machinery in stock, some of which may not be showing on our website. If you have any additional requirements please get in touch

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 26007/1, Year of construction: 2017, operating hours: 12,920 h, load capacity: 8,000 kg, lifting height: 5,600 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 3,010 mm, motor manufacturer: DEUTZ, gearing type: hydrostat, front tire type: cushion tires (black), rear tire type: cushion tires (black), empty load weight: 13,090 kg, Equipment: UVV, air conditioning, cabin, clamp, lighting, seat heater, sideshift, Triplex mast with full free lift, overall height: 3010 mm, lift height: 5600 mm, load capacity: 8000 kg at load center 600 mm, fork positioner with new side shifter, new fork tines length: 2000 mm, road lighting according to StVO, LED work lights front and rear, full cabin with heating, air conditioning, front and rear camera, DEUTZ engine, double pedal foot control, 6x new SE tires, operating manual included. Technical condition at the time of sale: Forklift is fully overhauled! Major maintenance just carried out! New UVV safety inspection completed without defects! Delivery: In perfect condition! 20 years of professional experience! INSPECTION AND TEST DRIVE: Rcedpfx Aey Spmqjbueh By appointment at any time during opening hours: Monday to Friday, 8:00 am - 6:00 pm. Saturday from 8:00 am - 1:00 pm. TRANSPORT: Low-loader or curtain side truck available at a reasonable price.

Condition: used, mileage: 133,000 km, power: 132 kW (179.47 HP), first registration: 08/2009, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 11/2026, color: orange, gearing type: mechanical, emission class: euro4, number of seats: 3, total length: 7,200 mm, total width: 2,360 mm, total height: 3,670 mm, Year of construction: 2009, Equipment: ABS, soot filter, 1st owner. Perfectly maintained and consistently well-cared-for vehicle from a government agency. German truck, recently passed inspections with only a few operating hours. Valid DGUV (German accident prevention regulations) until 12/2026 and TÜV (German vehicle inspection) until 11/2026. Extensively inspected by a Ruthmann service technician in December 2025, shortly before its scheduled decommissioning, and declared "ready for use." In December 2025, a complete inspection was carried out, including lubrication, maintenance, and replacement of minor parts such as signs and membrane keypads. The vehicle was recently used for maintaining public lighting. A new vehicle has now been purchased. Until then, the aerial platform was in full operation. The TÜV inspection on the truck was renewed at 132,918 kilometers, with validity "without any apparent defects" until November 2026. Rsdpfx Aoyrk A Ssbujch Chassis: MAN TGL 8.180 with leaf spring suspension. Euro 4 engine. 6-speed manual transmission ZF Ecolite. Registered as a "self-propelled working machine, aerial platform." Unladen weight only 5835 kg. Therefore, a large payload reserve is available, and heavy materials can still be carried in the equipment compartments. Permissible total weight: 7490 kg. Wheelbase 3600 mm. Driver's seat, comfort version with air suspension. 3 seats in total. Yellow rotating beacons. Minor signs of wear from the years are present, but no significant damage. This is an excellent-running truck. All documentation from RUTHMANN is included in the original (operating manual with parts list, inspection book, all inspection reports from recent years). Working height approximately 13 m. Lateral reach 8.20 m. Basket load capacity: 200 kg (2 people plus materials). Basket size: 1300 mm long / 1000 mm wide / 1100 mm high. The basket is made of plastic. Insulation against 1000 volts. Compressed air blow-out gun in the basket. This offer is only valid for commercial enterprises or government agencies. Subject to prior sale and errors. The net price for this excellent Ruthmann aerial platform is 22,500 euros!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase. Rjdpfoz Et E Esx Abusch

Condition: good (used), Year of construction: 1991, Control: Heidenhain TNC 407 Travel range: X = 600, Y = 400, Z = 420 mm Spindle speed range: 20 – 4000 rpm Gear stages: 3 Tool holder: SK 40 Quill stroke: 75 mm Spindle motor: 5.9 kW Feed rate range: 1 – 5000/6000 mm/min (manual/program) Rapid traverse rate x, y: 7 m/min Rapid traverse rate z: 6 m/min Rcedewvif Uepfx Abush Clamping surface: 900 x 458 mm Weight: approx. 2300 kg With coolant system, electric handwheel, and measuring probe (defective).

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: RERS 0193, workpiece weight (max.): 16 kg, total width: 820 mm, total length: 1,940 mm, total height: 1,660 mm, input current: 6 A, input voltage: 230 V, Schenck TB Sonio high-speed balancing machine for turbocharger rotors. The machine is in full working order and is currently in use (operation is performed using a computer mouse; the touchscreen function does not work – this is a factory defect of these monitors). Redpfxjz R Nq Re Abusch The balancing machine is sold with 83 adapters for balancing turbines.

Year of construction: 2001, condition: used, machine/vehicle number: AT109, Used CAMES bottle dryer - Year 2001Technical Specifications & Performance DataThis pre-owned bottle drying tunnel is engineered to remove surface moisture from containers before downstream operations. Manufactured by CAMES, model TNN 1, it provides consistent air-blown drying to stabilize labels and packaging quality across a wide range of beverage production lines. Its continuous tunnel configuration supports steady throughput and uniform drying performance suitable for high-demand industrial packaging environments.Manufacturer: CAMESModel: TNN 1Year: 2001Machine type: Drying Tunnel (air-blowing)Primary function: Bottle surface drying prior to labeling and packagingContainer compatibility: Designed for PET and Glass bottle handlingOperating principle: Directed airflow across bottle surfaces in a continuous tunnelIntegration: Inline installation on conveyors between rinsing/filling and labelingAdvanced Automation & Control SystemsThe CAMES TNN 1 supports stable and repeatable drying through controlled airflow within the tunnel section. Typical integration includes line start/stop synchronization, safety interlocks with upstream and downstream equipment, and straightforward operator controls for airflow adjustments. The tunnel concept minimizes manual intervention, helping maintain consistent bottle dryness that is critical for pressure-sensitive or glue-applied labels.Production Line Integration CapabilitiesBuilt for inline operation, this drying tunnel integrates seamlessly with conveyors and standard bottling layouts. It fits naturally between rinsing/filling and labeling stations, ensuring bottles are properly conditioned for high-quality labeling and subsequent packaging. The CAMES TNN 1 accommodates multiple bottle sizes and shapes commonly used in beverage production, supporting flexible format changes with mechanical adjustments and change parts as required by the line.Machine Condition & Maintenance HistoryThis is a second hand drying tunnel from 2001, suitable for integration into a used bottling line. Its straightforward, robust design favors routine maintenance and predictable operation in industrial environments. As with all pre-owned bottling equipment, maintenance schedules and line-specific service records can be aligned with the receiving plant’s preventive maintenance plans.Operational Performance & VersatilityThe CAMES TNN 1 improves downstream quality by ensuring reliable bottle dryness prior to label application. Consistent drying reduces label defects, enhances packaging appearance, and supports efficient line speeds. Its air-blowing tunnel architecture works across a wide range of beverage production scenarios and container materials, making it a versatile choice for industrial packaging facilities that manage diverse bottle formats and product portfolios.Installation Requirements & Site PreparationInstallation involves positioning the tunnel over an existing conveyor section with adequate straight runs upstream and downstream for smooth bottle flow. Site preparation typically includes providing the appropria... Rsdpfx Abjz E Dkfeuech

Condition: used, Year of construction: 2017, functionality: unexamined, machine/vehicle number: 22166, input voltage: 400 V, total height: 625 mm, total length: 1,315 mm, total width: 470 mm, Equipment: type plate available, For sale is a compact oil and emulsion mist separator, type AFS 1100. The unit is from the 2017 production year and was included as an accessory when a CNC milling machine was purchased. Since we already have a central extraction system in our production facility, we no longer need this individual unit and are selling it in its current condition. Technical specifications (manufacturer's data): Manufacturer: AFS Airfilter Systeme GmbH Model: AFS 1100 Year of manufacture: 2017 (Equipment number: 22166) Dimensions (L x W x H): approx. 1,315 x 470 x 625 mm Weight: approx. 72 kg Connection voltage: 400 V / 50 Hz Accessories: Includes original floor stand for free placement next to the machine. Condition and terms of sale: The unit shows the usual, normal signs of wear from a workshop environment (see photos). Since we will no longer electrically connect or install the extraction system at our location, a functional test was not possible on our part. We are therefore selling the unit expressly as untested/defective/for spare parts/for DIY enthusiasts, with the exclusion of any warranty. Scope of delivery: 1x extraction unit AFS 1100, 1x matching stand (as available/shown in the pictures) Shipping: Only self-collection or the buyer organizes shipping via a freight forwarder. A forklift for loading is available on site. The sale is exclusively to commercial customers (B2B) without any guarantee, warranty, or right of return. A proper invoice with VAT will be issued. Rsdpfxsz Ei Ayj Abusch If you are interested or have any questions, please send us a message or an offer.

Condition: ready for operation (used), machine/vehicle number: 2405/73, Year of construction: 1976, Heavy-duty trailer / industrial trailer AEG – 60-ton payload For sale is a robust AEG heavy-duty industrial trailer with a payload capacity of 60 tons. This trailer is ideal for internal transport of heavy machinery, equipment, steel structures, and other heavy loads. Technical specifications: * Manufacturer: AEG * Year of manufacture: 1976 * Payload capacity: 60,000 kg / 60 t * Tare weight: approx. 7,100 kg * Inventory number: 2405-71 Rcjdpfjzxnv Uex Abueh * Loading platform length: 6.00 m * Loading platform width: 2.50 m * Loading height: 1.18 m * Type: Heavy-duty / industrial trailer Due to its high payload capacity, this trailer is particularly interesting for industrial companies, mechanical engineering firms, equipment manufacturers, and heavy-load logistics companies. Inspection possible by prior arrangement. Further technical information and photos can be provided upon request. The sale is made with the exclusion of any liability for defects in materials and workmanship, to the extent permitted by law. Subject to prior sale. We also have three other models of heavy-duty trailers for sale. If you are interested, please feel free to inquire about these as well. We can then send you the corresponding documents, data sheets, and other materials for the respective models. If you have any questions, please do not hesitate to contact us.

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 2,354 h, power: 34 kW (46.23 HP), fuel type: diesel, Equipment: all wheel drive, Diesel All-Wheel Drive Articulated Telescopic Boom Lift MANITOU 180 ATJ Year: 2008 According to the hour meter: 2,354 hours • Max. working height: approx. 17.65 m • Max. platform height: approx. 15.65 m • Max. horizontal reach: approx. 10.60 m • Load capacity of the work platform: 230 kg (approved for a maximum of 2 people for outdoor use) • Boom arm rotation angle: 140° • Slewing range of the upper carriage: 350° • Rotation of the work platform: 180° (2 x 90°) • Total weight: 8,090 kg • Transport dimensions (L x W x H): 5.77 m x 2.30 m x 2.37 m (with retracted boom arm) • Overall length (extended): 7.77 m • Dimensions of the work platform (L x W): 1.80 m x 0.80 m • Ground clearance: approx. 42.5 cm • Engine: Perkins 404C-22 diesel engine with 45 hp (approx. 33 kW) • Drive type: All-wheel drive (4x4) and all-wheel steering (including crab steering) • Max. travel speed: 6.0 km/h • Max. gradeability: 40 % • Max. permissible side inclination: 5° (9 %) • Tank capacity: Fuel tank: 52 l / Hydraulic tank: 54 l - Ready for immediate use! - Original paint! - Good tires! Rjdpez Iv Etjfx Abujch New Austrian inspection certificate and inspection valid until 20.10.2026 without any defects – NEW! Selling price: €18,900.00 net Affordable delivery also possible!

Condition: used, Year of construction: 2016, 1) Zyklomat coolant cleaning system, application: cleaning of grinding emulsion, cleaning capacity: 350l/min, recirculation clean tank-dirty tank: 100-350l/min, max. machine supply: 250l/min, supply pressure: 3.5bar, filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3, separation limit: approx. 5µm, medium: emulsion 3-6%, max. medium temperature: 50°C, solid particles: brass particles, max. solids quantity: 15kg/h, total volume: 5.14m³, operating volume: 3.6-4.58m³, process: fully automatic full-flow filtration, sludge discharge: fully automatic, with non-flowing consistency, 2) double scraper tank for grinding sludge KR 1.75-5.1, total volume: 5.14m³, max. volume: 4.58m³, length: 4,000mm, including 70mm reinforcement, width: 1,890mm, including 140mm reinforcement, height: 1,105mm, including 100mm base profile, neck height: 2,300mm, max. theoretical discharge capacity: 15kg/h, function: coolant storage tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge, serviced annually, fully functional, no known defects, with documentation. An on-site inspection is possible. Rcjdpszvghksfx Abush

Condition: ready for operation (used), Year of construction: 1998, A Mikron CNC vertical machining center is available. Travel X/Y/Z: 900mm/630mm/500mm, table dimensions X/Y: 1200mm/600mm, max. table load: approx. 500kg, tool holder: SK40, speed: 5000rpm, rapid traverse: 10m/min, feed: 10m/min. Machine dimensions X/Y/Z: approx. 2400mm/3400mm/2300mm, weight: approx. 5000kg, control: Mikron, operating hours: approx. 35580h. The main control board of the machine has a defect. Including approx. 100 SK40 tool holders and tools. An on-site inspection is possible. Rodjzf Ncijpfx Abujch

Condition: used, Year of construction: 1994, A Maho 4-axis CNC machining center is offered for sale. X/Y/Z travel: 600mm/500mm/400mm, tool holder: ISO 40, max. spindle speed: 6000rpm, feed rate: 6m/min, rapid traverse: 13m/min, operating hours/power-on hours: approx. 58569h, control: Philips CNC 432. Equipped with through-spindle coolant supply with high-pressure pump, fully enclosed splash guard, automatic tool changer, 2-pallet changer and chip conveyor. The main spindle is defective and has already been removed from the machine. The machine is not operational. Documentation available. An on-site inspection is possible. Rcsdoz Hn S Aopfx Abuoh

Year of construction: 1985, condition: used, Spindle nose: A11, turret: VDI60, voltage: 380V, rated current: 153A, fuse protection: 160A, control: Philips B2T, one tool position for boring bars is defective, no driven tools, without chuck, with documentation and maintenance records, the machine was mechanically overhauled in 2010. An on-site inspection is possible, available from mid-December 2026. Rodjz Agfpopfx Abuech

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Good morning, Rcodpfxoz R R Tte Abujh I am offering for sale a Felder F900Z Z vertical milling machine. The machine is in VERY GOOD condition – it has been used less than it has been idle. It is a solid machine, ideal for precise woodworking. Its condition is visible in the photos, and it is ready for use – with no hidden defects. Please contact me via WhatsApp: 783-547-702.