Used Defect for sale (1,050)

Year of construction: 2003, condition: defective spare-parts repository (used), functionality: not functional, Cieffe hardening oven Itjdpfev Dlkkox Addsb The heating is partially broken and needs to be repaired. The oven is half disassembled. You are welcome to come by for a viewing by appointment.

Condition: used, machine/vehicle number: XLEP6X2000517xxxx, mileage: 585,000 km, Year of construction: 2007, Please contact ATS Norway for more information Please provide reference number upon request: 21242 Itsdpfx Aew Ucldeddeb Specifications: Km: 585,000 Transmission: Automatic with clutch 6x2 Full air suspension Engine brake Euro 5, 420 hp Good tires Zepro lift, 2000 kg Remote control SKAB body 21-pallet box, inside hight is 260 Cooling/freezing unit (not working) Bunk Radio/CD Climate control/AC Servicing done at local workshop Video attached Ready for delivery Description:Scania P240 box truck from 2007.The truck has a 21-pallet box and is approved until 2026.Cooling/freezing unit is not working.Service and maintenance carried out at local workshops.Ready for delivery. Km: 585000 HK: 420 Technical approved: Yes EU-approved until: 10.04.2026 Own weight: 15500 Payload: 11425 Model: P420

Condition: used, machine/vehicle number: 6FPPXXMJ2PDG3xxxx, mileage: 260,000 km, Year of construction: 2014, Please contact ATS Norway for more information Please provide reference number upon request: 21984 Specifications: 2014 model Mileage: approx. 260,000 km EU-approved until 15.08.2027 200 hp Rear seats included New studded winter tires (see photos) Summer tires Installed rear interior light AC/climate control Radio/DAB Ready for delivery Description:2014 Ford Ranger with two sets of tires.The owner is experiencing issues with the four-wheel drive and believes it is an electrical fault.Ready for delivery. Km: 260000 HK: 200 Technical approved: Yes EU-approved until: 15.08.2027 Own weight: 2116 Itjdpfx Adsx Dqt Todob Total Weight: 3200 Payload: 1009 Width: 185 Length: 527,4 Euro: 5 Model: RANGER Gearbox: Automatic Number of seats: 2

Condition: used, Year of construction: 2006, operating hours: 1,800 h, CE mark: yes Serial number: cat0365ccmcy00xxxx Please contact ATS Norway for more information Itodjyagdbspfx Addeb Please provide reference number upon request: 22153 Specifications: Model Year: 2006 Hours: Approximately 18,000 hours Weight: 71,900 kg Power Output: 301 kW Machine Width: 390 cm Track Width: 65 cm Cab Display: Not functioning Undercarriage: See photos Bucket Attachment: Direct attachment on bucket Bucket Type: Tooth bucket Air Conditioning: Yes Radio: Yes Lights: Yes Ready for Delivery: Yes Description: We have a 2006 Cat 365C excavator with a tooth bucket for sale. According to the owner, the machine operates as it should. The hour meter shows approximately 18,000 hours, but please note that the cab display is not functioning. A new battery was installed in the summer of 2025. Be aware that errors and defects may occur, and some maintenance or repair costs should be expected. The machine is ready for delivery. Hours: 1800 Own weight: 71900 Width: 390 Kw: 301 CE: Yes

Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Recorded spindle hours: 43,558 - Spindle speed range: 3,200/5,000 rpm - Swing diameter: 270 mm - Spindle distance: 900 mm - X1 axis travel: 290 mm - Z1 axis travel: 650 mm - X2 axis travel: 180 mm - Z2 axis travel: 650 mm - Y1 axis travel: ±40 mm - Z3 axis travel: 670 mm - X3 axis travel: 175 mm - Max. bar diameter: 100/104 mm - Number of driven tools per tool turret: 12 Isdsyaqgyepfx Addjtb - Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches Attention, the machine has the following defects: - The B-axis is defective (mounted on turret 1) - Guideways and drives show age-related wear - X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured) - Occasionally, axis reference value setting in the control system fails - The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026.

Condition: good (used), Year of construction: 2008, operating hours: 72,899 h, functionality: fully functional, machine/vehicle number: 07510001241, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 12,000 rpm, workpiece weight (max.): 150 kg, total height: 3,040 mm, total length: 7,800 mm, total width: 4,100 mm, overall weight: 16,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, DMG GILDEMEISTER GMX 250 LINEAR CNC Turning and Milling Center - Recorded spindle hours: 39,361 - Swing diameter: 640 mm - Counter spindle turning diameter: 400 mm - Spindle distance: 1,500 mm - X1 axis travel: 550 mm - Y1 axis travel: 180 mm - Z1 axis travel: 1,185 mm - B1 axis travel: 240° - X2 axis travel: 180 mm - Z2 axis travel: 1,050 mm - Z3 axis travel: 1,150 mm - Spindle speed range: 3,200/4,000 rpm - Rapid traverse rate, Slide 1 (X/Y/Z): 40/24/70 m/min Isdoyaqczepfx Addotb - Rapid traverse rate, Slide 2 (X/Z): 24/36 m/min - Rapid traverse rate, Slide 3 (Z): 36 m/min - Tool holder: HSK 63 - Spindle speed: 12,000 rpm - Number of tool stations in chain magazine: 40 stations - Incl. tool holders mounted on the turret - Incl. bar loader, manufacturer: COCCHE GIOVANNI, type: CNC-DB 110, year of manufacture: 2008, serial number: CNCDB-08.306, weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty – it needs to be repaired - The Q2 axis (milling spindle tool changer) fails frequently - X2 axis (guideways) moves slightly askew - The linear guides and drives show wear commensurate with age Attention: A vehicle with 3,000 mm transport width is required for transport! FCA D-58256 Ennepetal, loaded onto truck at a mutually agreed date at the end of February 2026.

Year of construction: 2019, condition: used, Serial number: 6xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21657 Specifications: 2019 model 1493 hours Weight: 1600 kg Yanmar engine Defective turtle function Light Errors and omissions Itedoxq U Uzspfx Addeb ready for delivery Description: We have a 2019 Ammann Roller for sale. The turtle function does not work on it. Other than that, it works as it should according to the owner. Errors and shortcomings exist and some cost must be taken into account. Ready for delivery Own weight: 1600 Model: Vals

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21164 Specifications: Container unit Itjdpew Sc N Rsfx Addjb Shower Toilet Kitchen Refrigerator Sink Living area 20 feet Ready for delivery Description:For sale: 20-foot container unit with shower, toilet, kitchen, refrigerator, sink, and living area.According to the owner, everything is working as it should, but defects or issues may occur.The unit is ready for delivery.

Condition: used, Year of construction: 2010, operating hours: 14,933 h, CE mark: yes Serial number: 12xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21790 Specifications: Iodpfoxwkkrex Addetb 2010 model Certified to: 07.04.26 Hours: 14933 22960 kg 110 kW Machine width: 299 cm Central lubrication Auxiliary hydraulics Chassis (see pictures) Track guides S70 attachment Engcon EC30 tiltrotator Klepp mek dental tray SMP sanding bucket Services taken by owner Light Radio Air conditioning/ac Videos Delivery by appointment Description: We have a 2010 Volvo ec210cl excavator with rototilt, sanding bucket and tooth bucket for sale. The machine is in weekly operation and the number of hours will increase slightly. Services have been taken continuously by the owner. The machine functions as it should according to the owner, but errors and defects may occur. The machine is ready for delivery by appointment. Hours: 14933 Own weight: 22960 Year controlled: Yes Year controlled until: 07.04.26 Width: 299 Kw: 110 CE: Yes Model: ec210cl gravemaskin m/ rototilt, pusseskuffe og tannskuffe

Condition: used, Year of construction: 1996, Serial number: 8xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21912 Specifications: Iedsxz N Ahepfx Addetb 1996 model 1848 hours (I'm a little worried) 564 stroke hours 82 kW Weight: 8160 Machine width: 230 cm Winch Directional instrument Boart HD125 hammer Chassis Diesel heater Videos Ready for delivery Description: We have a 1996 Nemek 503 TXI drilling rig w/ low hours for its age for sale. Errors and defects may occur as the rig is from 1996. But the owner says it works as it should. It has few hours on the engine and hammer in relation to its age. Ready for delivery Own weight: 8160 Engine hours: 1848 Model: 503 TXI borerigg m/ lite timer i forhold til alder

Year of construction: 2011, condition: used, Field of application: Freight transport Please contact ATS Norway for more information Please provide reference number upon request: 20700 Specifications: Itjdpjwqwiksfx Addeb - 2011 model - Fits 3 axle hook truck - Rear extension for 2 containers - Remote control included - Ready for delivery Description: We have a 2011 Joab lift body for hook truck for sale. There is an extension at the rear so there is room for 2 containers. A new remote control unit was installed a few years ago. Everything works as it should according to the owner. But errors and defects may occur. Ready for delivery Own weight: 9998 Model: Joab liftpåbygg til krokbil

Year of construction: 2017, condition: used, New: No Field of application: Construction Please contact ATS Norway for more information Iedpfxsw R Nndj Addetb Please provide reference number upon request: 21154 Description: We have a 2017 3m3 Chrois concrete drum for Hydrema Dumper for sale. The concrete drum takes 3m and functions as it should according to the owner. Errors and defects may occur. Ready for delivery. Own weight: Model: 3m3

Condition: used, Year of construction: 1998, Please contact ATS Norway for more information Please provide reference number upon request: 20069 Specifications: - 1998 model - 45000 kg - 479 kW - Automatic transmission - Unknown hours - Repair item - Tires (see pictures) - Uncertain condition - Ready for delivery Description: We have a 1998 Euclid R60 Tipper Truck Repair item for sale. The tipper truck is being sold as is and in unknown condition. Itsdpfx Aoxw Nkkeddjb An effort must be made by the buyer to get it running again. Faults and defects occur and additional costs must be included. Ready for delivery. Own weight: 45000 Total Weight: 45000 Kw: 479 Model: R60 Tipptruck ekt

Condition: used, functionality: fully functional, Offered for sale are used 20DV office containers from Berlin. CONTAINER TYPE: 20DV Office Container CONDITION UPON DELIVERY: Used, wind- and waterproof, without equipment, original photos All containers are equipped with electrical installation and heating; the entrance door is located on the short side. The containers are sold in used condition and may show defects, impurities, color variations, rust, etc. DIMENSIONS LxWxH: 6058 x 2438 x 2800 mm, internal height 2500 mm. AVAILABILITY: Immediate TRANSPORT: You are welcome to provide your postal code so we can offer you a free and non-binding quotation for the container including delivery, and unloading from the truck if required. Itjdpfx Aeyapt Soddjb VARIETY: We also offer shipping containers in all common sizes (20DV, 40DV, 20HC, 40HC…) for every need, whether for storage, construction projects, logistics solutions, or sea transport. We look forward to hearing from you! MAGITU GmbH

Condition: excellent (used), Test beams Isdpfx Adeg N Achedetb Test beams Make Mauser defective, see picture length 350 mm width 190 mm Height. 60 mm in wooden case

Condition: like new (used), Year of construction: 2023, operating hours: 3,290 h, functionality: fully functional, machine/vehicle number: 10002197, Hartford LG 1570 — Specifications • Machine type: CNC machining center (vertical machining center) • Make: Hartford • Model: LG 1570 • Year: 2023 • Serial No.: 10002197 • Control: Heidenhain Axes • 3-axis Table • Table size: 1,600 x 700 mm Travels • X-axis: 1,500 mm • Y-axis: 700 mm • Z-axis: 650 mm Spindle / tool interface • Tool taper: SK40 • Spindle speed: up to 12,000 rpm • Spindle motor: 11 kW Tool changer • 40-position automatic tool changer Workpiece capacity • Max. workpiece weight: 1,000 kg Features / equipment Iedoyap Agopfx Addjtb • Coolant system • Cyclone filter extraction unit • Chip separator and chip conveyor Hours (read) • Total hours: 3,290 h • Cutting/milling time: 2,145 h Weight • 9,227 kg Overall dimensions • 4,750 x 3,400 x 3,300 mm (as provided; originally stated in cm) Condition / note • A decoder is defective and still needs to be replaced

Condition: used, Year of construction: 2016, operating hours: 7,635 h, Serial number: CB00xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20363 Ijdpfowi Rp Usx Addetb Specifications: - 2016 model - 7635 Hours - 67600 kg - Good with crushing plates again - Side conveyor - Rubber in feeder - Central lubrication - Volvo engine - 315 kW - Magnet - Feed box - New batteries - Ready for delivery Description: We have a 2016 Sandvik UJ440i crusher w/ side conveyor and magnet for sale. Maintenance and services have been taken continuously. Everything works as it should according to the owner. Errors and defects may be found. Ready for delivery Hours: 7635 Own weight: 67600 Total Weight: 67600 Model: UJ440I

Condition: used, machine/vehicle number: 8xxxx, Year of construction: 1980, Please contact ATS Norway for more information Please provide reference number upon request: 20381 Specifications: - 1980 model - 3 Axles - Swing on 3 axles - Tires (see pictures) - Manual wider - Repair item - Forced steering on 3 axles - Ready for delivery Description: Itodewi Rudjpfx Addeb We have a 1980 Hafo 3 axle Well Trolley Repair Item for sale. Being sold as a repair item as it is in poor condition. Errors and defects occur and some additional costs must be expected. Ready for delivery Technical approved: no Own weight: 1600 Total Weight: 55000 Payload: 44170 Width: 250 Length: 1450 Model: 1980 Hafo 3 akslet Brønntralle ekt

Condition: used, machine/vehicle number: YV2ASW0C37A63xxxx, mileage: 649,411 km, Year of construction: 2007, Please contact ATS Norway for more information Please provide reference number upon request: 21161 Specifications: 2007 model 649,411 km (will increase) I-Shift 480 hp 6x2 Lift on 3rd axle Euro 4 engine Tires (see pictures) 20-ton hooklift Hooklift with kink Toolbox Hydraulic underrun protection Trailer hitch Climate/AC Radio Lights Ijdow R Nl Nopfx Addjtb Ready for delivery Description:We have a 2007 Volvo FH hooklift truck with kink for sale.According to the owner, the truck works as it should and is EU-approved until 12.06.2026.Defects and signs of wear may be present due to the age of the vehicle.Ready for delivery. Km: 649411 HK: 480 Technical approved: Yes EU-approved until: 12.06.2026 Own weight: 12680 Total Weight: 28000 Payload: 15245 Width: 255 Length: 862 Euro: 4 Model: FH Krokbil m/ knekk SE VIDEO

Condition: used, machine/vehicle number: YV2JSW0C08A67xxxx, mileage: 448,556 km, Year of construction: 2008, Please contact ATS Norway for more information Please provide reference number upon request: 21171 Specifications – Car: 2008 model EU-approved until: 31.01.2027 Odometer reading: 448,556 km I-Shift automatic transmission Power: 480 hp / 353 kW Drivetrain: 6x2 Euro 4 engine Front suspension: steel Rear suspension: air Tires (see pictures) Total length of the platform with full extension: 7.442 m Hydraulic extension: 1.5 m Foldable side doors Nox sensor recently replaced Central lubrication Air conditioning / AC Radio Extra lights   Specifications – Crane: 2008 model 370.11/8S Certified until: 05/2026 All bearings in the crane joints have been recently replaced 8 hydraulic extensions 1 manual extension Winch is disconnected (defective) Itsdpow Sc Ruefx Addsb 4 support leg Remote control Ready for delivery   Description: Volvo FM480 crane truck with 37 tm Effer crane (both 2008 model) for sale. The crane has had its bearings replaced in all joints and is ready for use. The winch is disconnected due to a fault. The car otherwise functions as it should according to the owner. Faults and defects may occur, and some additional costs must be expected. The crane truck is ready for delivery. Km: 448556 HK: 480 Technical approved: Yes EU-approved until: 31.01.2027 Own weight: 18000 Total Weight: 28000 Payload: 9925 Width: 255 Length: 1040 Euro: 4 Model: FM480 kranbil m/2008, 370.11/8S Effer kran SE VIDEO Gearbox: Automatic

Condition: used, machine/vehicle number: 100xxxx, mileage: 117,898 km, Year of construction: 1978, Please contact ATS Norway for more information Please provide reference number upon request: 21424 Specifications: 1978 model 117,898 km Rep. Object 205 hp 6x2 Manual transmission Tires (see pictures) Rust of the rear housing (see pictures) Frame sand blue and varnished a few years ago Battery needs to be replaced. Tipping box Foldable aluminum limbs Internal length in plan: 6,115 m Internal width in plan: 2,475 m Light Heater Ready for delivery   Crane specifications: 1979 model 10 t/m crane 2 Hydraulic outriggers 2 Hydraulic extensions 1 Hydraulic extension on main boom 1 Manual Manually controlled Ready for delivery   Description: We have a 1978 Scania LB 81 6x2 Crane truck w/ 10t/m crane and tipper ekt for sale. The car is being sold as a repair item as it is no longer EU approved and there are errors and defects. There is a bad battery on the car, these should be replaced. Starter is starting to get bad. Errors and deficiencies exist and some cost must be taken into account to get it back in good condition. Ready for delivery Km: 117898 HK: 205 Technical approved: no Ijdpfxoxgcrgj Addstb EU-approved until: 28.02.2019 Own weight: 10100 Model: LB 81 6x2 Kranbil m/ 10t/m kran og tipp ekt Gearbox: Manual

Condition: used, Year of construction: 2007, lifting height: 13,100 mm, Weights Empty weight: 7.100 kg Functional Lifting capacity: 565 kg Working height: 1.510 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: 4394 RT Year of build: 2007 Condition: Used Data: Max. working height: 15,10 m Platform height: 13,10 m Lifting capacity: 565 kg Platform dimensions LxW: 6,25 x 3,81 m Itedpfx Adjx Tt Afjdeb Movable up to working height: 15,10 m Drive type: Diesel Empty weight: 7100 kg Information: Defect, engine damage Location: 41468 Neuss immediately available

Condition: used, Year of construction: 2013, operating hours: 3,064 h, Applicable material: Asphalt Serial number: 10188210xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20327 Specifications: - 2013 model - 3064 hours - Deutz engine - Hydraulic lift and lower - Milling width of 60 cm - Lower and raise function on the roof - Ready for delivery Itedpfswi Rc Uex Addsb Description: We have a 2013 Bomag BM600/15 Asphalt milling machine for sale. Everything works as it should according to the owner. Services have been carried out at our own workshop. The milling width is 60 cm. Errors and defects may occur. Ready for delivery Hours: 3064 Own weight: 6800 Model: BM600/15

Condition: used, New: No Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 20609 Specifications: Itjdpowph Izefx Addob - Unknown year - Montabert T28 hammer - Remote control with cable - Air hoses need to be replaced - Air-powered hammer with grease pot - S50 attachment - Errors and defects may occur - Ready for delivery Description: We have a Drilling tower w/ s50 attachment and Montabert T28 hammer for sale. The tower is controlled by remote control with cable. The tower has not been used for a while so errors and defects may occur. Air hoses need to be replaced. Ready for delivery. Own weight: 1 Model: m/ s50 feste

Condition: used, machine/vehicle number: WV1ZZZSYZJ901xxxx, mileage: 286,731 km, Year of construction: 2017, Please contact ATS Norway for more information Please provide reference number upon request: 21863 Specifications: 2017 model EU approved until: 21.03.27 286,731 km Euro 6 engine Automatic transmission Tires (see pictures) 177 hp 4x2 Cosmetic damage exists Number of seats: 3 Brake pads should be checked. Services have been taken to the workshop Glow plugs need to be replaced Air conditioning/ac Light Radio Rear view camera Heated mirrors Ready for delivery   Notes: Glow plugs need to be replaced. The brake lining must be checked. Cosmetic damage exists (see photos)   Description: We have a 2017 Volkswagen Crafter Van for sale. The car functions as it should according to the owner. However, there are cosmetic defects and flaws. (See pictures) Some cost must be taken into account. Ready for delivery. Km: 286731 HK: 177 Technical approved: Yes EU-approved until: 21.03.2027 Own weight: 2091 Itjdexypraopfx Addjb Model: crafter