Used Die Casting for sale (5,886)

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Hello, we are offering our 2017 Rabolini die-cutting machine/die-cutting system, which has been completely overhauled. Credszxufvjpfx Ab Djg The maximum die-cutting format is 100 cm x 140 cm, with a cutting force of 360 tons. Die-cutting principle: flat/flat. Weight of the machine: 8,100 kg. The die-cutting machine is located on the ground floor, on a well-accessible industrial concrete floor. Documentation, CE declaration, etc., are all available! The machine can be inspected and tested while in operation. We would be happy to assist with training and instruction on how to operate the machine. The machine is located in D-41751 Viersen and is available for inspection. If you have any questions about the machine, please do not hesitate to contact us.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, The system was manufactured for a customer project but was not put into operation due to a subsequent change in the installation requirements. The conveyor belt is in new condition and is immediately available. This provides the opportunity to purchase the system at a significantly lower price than the new price. Aluminum angle conveyor with substructure, including adjustable feet and machine feet for leveling uneven surfaces. Horizontal section: 750mm Rising section: 2,300mm Inclination angle at the bend: 60° Height of the horizontal section: 250mm Conveyor belt length measured on the floor: 1,900mm Discharge height: 2,200mm Design: Aluminum construction - 2x profile reinforced 90x45mm - Full-surface wear plate, 2.0mm, galvanized Drive roller + deflection roller, S235 steel, welded and machined Ø100x520mm, crowned, shaft fixed with tension bearings Drive: Gearmotor, 0.55KW, speed 0.53m/sec Connection 230/400V, 50Hz, protection class IP54 Drive ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Conveyor belt width: 500mm 2 pieces of wave edges, 50mm high, 25mm wide, high-frequency welded 21 pieces of T-40 studs, 300mm long, approx. 300mm spacing Belt material: 2-layer, particularly dimensionally stable in the transverse direction Crjdszfi A Aopfx Ab Djg In the bend area, the belt is guided on both sides with 2 pressure rollers each. The belt is designed with a border-free zone of 70mm on both sides. Due to the wave edge on both sides, the usable width of the conveyor belt is reduced: Usable width: 300mm, as follows: (Top view) Transverse arrangement: 70+25+5+300+5+25+70mm Belt guidance via PVC wedge strip on the running surface, profile - 10x6mm - Including recess in the wear plate - Including sliding joints in the drive and deflection roller Inspection possible after consultation Price is net, plus 19% VAT.

Condition: good (used), Year of construction: 1991, functionality: fully functional, CNC sinker EDM machine MAHO HANSEN, Type: HS 500 E, Year of manufacture: 1991, with electrode changer (without electrode holders) and accessories. Control system: EROCOM 20 (Heidenhain). Technical data: see data sheets. Crodpfxjzcmano Ab Djg From a toolmaking department; all documentation available, in good condition.

Year of construction: 2022, operating hours: 9,500,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 4131.05/22, -Bograma BSR 550 Servo with pallet feeder -Cylinder heater -Registration mark reader -Interface box for controlling an external vacuum valve -Stack delivery STA 550BK for a maximum of 9 sheets Codpfezl Skpjx Ab Djrg -Performance: 12,000 sheets/hour, 165 m/min -Minimum format: 210 x 297 mm -Maximum format: 550 x 750 mm

Condition: new, Brand New - One Year Warranty Max. die cutting size 1100 X 800 mm Working speed 23±2 s/min Max. rule length ≤30 m Motor power Crjdpjvv R Hzjfx Ab Deg 5.5 kW Weight 4500 kg Overall machine dimensions 2080 X 1950 X 1900 mm

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2021, Aluminum flat belt conveyor 1,600 × 300 mm – NEW from stock (year of manufacture 2021) For sale is a like-new aluminum flat belt conveyor in an industrial design. The conveyor comes from our stock, has not been used in production, and is therefore in very good condition. Thanks to its high-quality aluminum construction and powerful ELVEM geared motor, the conveyor is ideally suited for professional use in production, warehousing, packaging, mechanical engineering, and automation technology. Technical data: Year of manufacture: 2021 Condition: New from stock Conveyor length: 1,600 mm Belt width: 300 mm Robust aluminum profile construction Green PVC conveyor belt with cleats High-quality ELVEM geared motor Three-phase connection (400 V) Smooth and low-maintenance operation Application areas: Mechanical engineering Packaging technology Warehousing and conveyor technology Automation Assembly workstations Feeding of workpieces Transport of individual parts, plastic, metal, or packaging components Advantages: ✅ New from stock ✅ Immediately available ✅ Robust industrial quality ✅ Low-maintenance aluminum construction ✅ High-quality industrial geared motor ✅ Compact design ✅ Ready for immediate use An inspection is possible at any time by prior appointment. Scope of delivery: Aluminum flat belt conveyor Crjdpfszhx Dujx Ab Dog ELVEM geared motor PVC conveyor belt with cleats Net price, plus 19% VAT.

Condition: excellent (used), Year of construction: 2001, operating hours: 27,265 h, functionality: fully functional, Charmilles Roboform 35 with QCRI robot Year of manufacture: 2001 Operating hours: 27,265 X, Y, Z travel: 355 x 255 x 305 mm C-axis with Erowa chuck Crodpfxeyh E A Nj Ab Dsg Erowa chuck on the table Erowa probe Magnet 3 x aluminium Erowa pallets 320 x 320 mm 35 x electrode holders 50 x 50 mm QCRI robot 4 x pallet positions on the table 54 x electrode holder locations Documentation and diskettes Machine powered up for inspection

Condition: excellent (used), Year of construction: 2011, operating hours: 26,882 h, functionality: fully functional, travel distance X-axis: 310 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 270 mm, Exeron S 310 MF Year of manufacture: 2011 Generator hours: 26882 Control system: Exowin 20 X, Y, Z travel: 310 x 270 x 270 mm C-axis 3R tool holder in the spindle Erowa chuck on the machine table with magnetic plate Generator: 64 A C-box for carbide and PKD tools 20-position tool changer Fire extinguishing system Crsdpjzguk Usfx Ab Deg Chiller Aluminum clamping plate, Erowa Documentation Machine is connected and available for inspection.

Condition: good (used), Year of construction: 2015, Maximum casting weight: 1,400 g Maximum mold size (W x D x H): 450 x 470 x 400 mm Chamber internal dimensions (W x D x H): 450 x 470 x 700 mm Chamber external dimensions (W x D x H): 900 x 600 x 860 mm Pump vacuum performance: 25 m³/h Evacuation time 1,013 >> 0 hPa: 3 min Csdpfxjzx Ecfe Ab Djrg Flooding time: 35 s Voltage: 230 V, 50 Hz Power consumption: 1.2 kW Accessories, see photos 2x MEMMERT drying cabinets

Year of construction: 2023, condition: as good as new (ex-display), Aluminum angled conveyor belt with substructure including adjustable feet and machine feet for levelling horizontal range: 2,500mm Rising area: 800mm Lead angle in bend: 40° Total conveyor length: 3,100mm Discharge height: 700mm Height of horizontal: 320mm PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge petrol matt Drive: motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz protection class IP54 Crsdpfx Absk Scxis Dog Drive etc. ready for connection, motor 2 pcs. corrugated edges 80x45mm 2-layer particularly laterally stable Usable width 370mm

Condition: used, Year of construction: 1987, functionality: fully functional, shaft length under head: 160 mm, thread length: 85 mm, total width: 2,800 mm, total length: 7,800 mm, bar diameter (max.): 16 mm, Machine is complete bolt making machine with pointing and threading. Cjdpfjztrpnsx Ab Dorg

Condition: good (used), Year of construction: 2005, operating hours: 25,000 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 315 mm, workpiece weight (max.): 500 kg, workpiece length (max.): 576 mm, workpiece width (max.): 400 mm, table load: 500 kg, Equipment: documentation/manual, We are offering this well-maintained Zimmer+Kreim 600 wire EDM machine, manufactured by Zimmer&Kreim in 2005, for sale. Manufacturer: Zimmer+Kreim Model: 600 Year of manufacture: 2005 Condition: good Category ID: 1901 Type ID: 1429 Machine type: Wire EDM machine Zimmer&Kreim If you have any questions or require further information, please do not hesitate to send us a message or call us. Codozufdzjpfx Ab Derg

Condition: excellent (used), Year of construction: 2005, operating hours: 16,000 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, Control system: AGIEVISION Table dimensions: 600 x 450 mm Max. table load: 400 kg Max. travel ranges: 350 x 250 x 350 mm (X/Y/Z) 28-position tool magazine C-axis integrated: 60 RPM CO2 extinguishing system Cjdpfozk Ibzex Ab Djrg Year of manufacture: 2005 Approx. 16,000 erosion hours The machine is fully functional, ready for operation, and connected.

Condition: excellent (used), Year of construction: 2001, Ref: 10900 . 2001 Bobst SP102-BMA Foilmaster Excellent condition! Only 33,000 hours worked! Equipped with: Crodpfx Absu Snwme Dsg Fully Automatic Feeder Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Foil Advance Shafts Automatic Delivery Elevated (High Pile) Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Working Material Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Gripper margin: 9-15mm Stamping Format: Max 680mm x 1010mm Max speed: 7,500 p/h

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Made in Spain. Format 760x1060mm Weight 3600kg Power supply 380V Installed power 4.5 kW Equipment: – pneumatic clutch – control panel Crodpfx Abjzyz D Is Deg – mounting frame – 3 operating modes: continuous, with time delay, manual – central lubrication – safety guards – operating tools – sheet metal for pressure

Condition: excellent (used), Year of construction: 2019, operating hours: 8,255 h, functionality: fully functional, We are offering a system consisting of two ZK Genius 700 wire EDM machines, complete with the associated Chameleon Quad automation system. Due to changes in our product portfolio, these machines are no longer required for our wire EDM capacity. The complete system is in very good used condition. 1x ZK Genius 700, manufactured in 2015, with 22,056 operating hours 1x ZK Genius 700, manufactured in 2019, with 8,255 operating hours • Travel range: 400 x 350 x 350 mm • Table: 575 x 500 mm • Workpiece weight: 700 kg Crsdpfozwt Erex Ab Dog • 96 Ampere generator capacity • Controlled C-axis and rotating spindle • CO/2 fire extinguishing system from Kraft & Bauer and extraction system • C-module for hard metal, PCD, or etching applications • O-module for very fine surface roughness • CIMCO editor for path-controlled wire EDM 1x Chameleon Quad, manufactured in 2015 • 176 electrode positions • 9 UPC pallet positions with loading drawer • Double rotary gripper for Erowa ITS • Single gripper for UPC pallets

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 1,750 mm, total width: 1,980 mm, total length: 2,460 mm, rotor diameter: 360 mm, rotor width: 1,000 mm, power: 45 kW (61.18 HP), Material shredding machine MHR 1030-45KW - Feed opening: approx. 1,030 x 1,235 mm - Hopper shape: inclined - Hopper volume: approx. 1.5 m² Crsdpfxot Rivto Ab Dog - Rotor diameter: 360 mm - Rotor design: standard - Cutting system: 25 concave blades + 25 square blades - Screen aperture: 25/30 mm - Control: electronic via PLC - Control cabinet: fully wired, including 5 m connection cable - Main motor: 45 kW, 400 V - 50 Hz - 3-phase - Equipped with a sliding gate with a pressure bar - Painting: body RAL 9005 (black), hopper + drive guard RAL 5012 (blue) Equipment: Including automatic star-delta starter, automatic shutdown in case of idling, timed control to avoid unnecessary idle times Performance-enhancing step control for hydraulic sliding gate, vibration-damping machine feet including a base frame for integrating a discharge conveyor belt including wiring for integrating a discharge conveyor belt and an overbelt magnetic separator.

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: WFB2500x2400, conveyor belt length: 4,900 mm, conveyor belt width: 290 mm, conveyor belt speed: 400 mm/s, total length: 4,200 mm, total width: 540 mm, total height: 2,000 mm, overall weight: 250 kg, discharge height: 2,000 mm, power: 0.55 kW (0.75 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, motor manufacturer: GEMOTEG, Equipment: type plate available, Complete solution for conveying bulk material such as wood chips, wood pellets, shredded material, granulate, etc. Aluminum angled conveyor belt incl. substructure Horizontal area 2,500mm Rising area 2,400mm Angle in bend 45° Feed height: 300mm Discharge height 2,000mm Total conveyor belt length measured on the floor: 4,200mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Drive: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz Protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Shaft edge: 50x35mm 25 pcs. T-40 cleats - 396mm pitch 2-ply especially transversely stable Useful width: 290mm, results as follows: Queranordnung 70+35+290+35+70mm ONLY WHILE STOCKS LAST!!! All our prices are net prices plus VAT. - can also be viewed under power after consultation! Crsdpfxerwi D Eo Ab Deg

Condition: used, Year of construction: 1990, Straight across transfer with IFO cam Cjdjzt Thxspfx Ab Dsrg PKO in All Stations Bushing Cutoff Trimming Dual feed rolls Motorized lift on transfer rack Oil centrifuge Touch screen display Hydraulic lock on ko adjustment Sakamura uncoiler NOTE - Machine totally overhauled in 2009

Condition: good (used), Heidelberg Cylinder SBD 64×89 Automatic Die Cutter The most sought-after machine on the market, in its late 2000s. The machine is in very good condition and ready for operation. Format: 640x890mm The machine is ready for die cutting. Fully automatic, with smooth speed control, central lubrication, and safety guards. The machine features a quick-change carriage system on the infeed and a convenient cabinet on the side of the machine. Csdpfxjzvgk Es Ab Derg Includes two frames, spare parts, a cylinder plate, carriages, and a large set of fillers and locks.

Condition: good (used), Manual die-cutting with hot foil system. Codjzyc D Aopfx Ab Derg Maximum size: 720 x 1040 mm. Hot foil system with 3 zones. Heating frame needs to be replaced. In production. Available immediately.

Condition: new, Year of construction: 2020, operating hours: 30 h, functionality: fully functional, machine/vehicle number: 1704, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 270 mm, workpiece weight (max.): 550 kg, table width: 400 mm, table length: 600 mm, tank capacity: 285 l, positioning speed: 10 m/min, The Sodick AG 40L LN2, type PN40T, has less than 30 hours of operation and was used exclusively for research and development. It is ready for transport. Includes an additional 4-position electrode changer (SATC). Cedpszfxydjfx Ab Dorg Technical specifications: Max. electrode weight: 50 kg Controlled axes: 4 (X, Y, Z, C) - software ready for a 5th axis Machine dimensions including generator and tank: 1662 x 2490 x 2330 mm SQ mode (for mirror surface finishing) LAN connection 64-bit CNC control Total power consumption: 10 kVA Included: Fire extinguishing system

Condition: used, Year of construction: 1973, functionality: fully functional, machine/vehicle number: M14L/9094, Offer Number: M14L/9094 Machinetype: thread rolling machine - flat die Make: MENN Type: GW32 Constr. year: 1973 diameter range: 1,6-4 mm shaft length under head: 50 mm max. thread length: 30 mm output pieces/min: 300-750 Location: In our warehouse Crsdozwqh Rjpfx Ab Djg

Condition: like new (used), Year of construction: 2024, Permanent overbelt magnetic separator TYPE DMPM1200 1.800 x 900 x 220mm ===== Crodpfx Aotxn Ireb Dog Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnetabmessungen: 1.200x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with tension bearings. Drive: GEMOTEG shaft-mounted geared motor 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz Protection class IP54 Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 9 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply especially transversely stable * equipped with stainless alligator connectors RS125 Magnetic properties: Built-in magnetic core: Strontium ferrite Y30 Bonded SfRe strontium hard ferrite magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole pieces tightly closed and sealed.

Condition: used, Year of construction: 1973, This Krause C64-50 Autofeed Die Cutter is a powerful machine designed for precise and efficient die cutting work. With a maximum format of 600 x 500 mm, it offers the flexibility to handle a wide range of materials. The machine is currently located in the Netherlands and is standing still, which represents an ideal opportunity for those looking for a high-quality die cutting machine. Format: 600 x 500 mm Min. Size: NULL Max. Size: Maximum sheet size: 600 x Net Weight: 8.200 kg Measurements: L: 3.320 W: 2.440 H: 2.13 Equipment: Krause autofeed die cutter Crodpfxevfx Ulo Ab Deg Max. Size: 60 x 50 cm (23 x 19 inch) Processable materials: Paper, heavy cardboard, corrugated board, plastics, and leather Maximum cutting pressure: Approx. 40???50 tons (engineered for high-precision heavy die cutting)