Used Die Sinking Machine for sale (89,768)

Condition: good (used), Year of construction: 1999, operating hours: 52,324 h, functionality: fully functional, X working area max.: 1270 mm Y working area max.: 1270 mm Control: Bosch Type 3 Basic Standard equipment: - Robust C-frame - Safety light barriers - Coordinate guide with integrated linear magazine - 2 clamping claws - Automatic tool changer - Automatic repositioning - Tool length compensation - Forming capability - Mono tool holder with 360° rotation for all tools - Programmable hold-down device - Multitool drive - Punch slug extraction - Brush tables - Part chute 200 x 200 mm, sorting of parts into 2 containers - NC-controlled, digital, maintenance-free three-phase drives - Network interface RJ34 Iedpfjxxbdlsx Addeal - 3.5" floppy disk drive - TOPS 2000 graphical programming - Online diagnostics via modem - Operating manual + Vibration-damped installation + Multitool + Thread forming + Start post

Condition: reconditioned (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 7923278, type of input current: three-phase, overall weight: 8,200 kg, total height: 2,130 mm, total length: 3,320 mm, total width: 2,440 mm, space requirement width: 2,440 mm, input current: 30 A, input frequency: 50 Hz, nominal power: 7.5 kW (10.20 HP), rotational speed (max.): 4,600 rpm, rotational speed (min.): 1,500 rpm, 72x102 cm die cutter for thin paper and light carton up to 600 gsm. Exceptionally stable and very silent fast cylinder press. Floor anchoring is not necessary. Iaodpfx Adex Hzm Sodel

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Ijdpfx Adet H Nhhjdsal Sheet format max. 830 x 1,150 mm Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder 10" inch display at the feeder Automatic non-stop roll cloth in the feeder stripping station Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: excellent (used), Year of construction: 2019, operating hours: 51,377 h, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 270 mm, workpiece weight (max.): 550 kg, total height: 2,350 mm, total width: 2,025 mm, total length: 2,040 mm, overall weight: 2,920 kg, table load: 550 kg, Equipment: documentation/manual, Sodick EDM die-sinking machine AD35L Isdpfx Ajx Rp Dtoddsal Dielectric tank 400 l, max. electrode weight 50 kg, machine footprint 2800 mm x 3140 mm. Extraction system is not included in the scope of delivery.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 1,000 kg, year of last overhaul: 2025, GF FORM 30 Revised Die-Sinking EDM Machine Year of manufacture: 2015 AC FORM HMI control system Travel paths (X/Y/Z): 600 x 400 x 400 mm Max. workpiece dimensions: 1000 x 700 x 400 mm Max. workpiece weight: 1000 kg Integrated C-axis, rotation speed U = 0–100 rpm Manual tank level adjustment: 150–450 mm ISPG generator with 80 A Iaedpfxex Ifrhs Addsl Best surface finish: Ra 0.1 µm 6-position electrode changer in magazine Operation via 15" flat screen monitor with mouse Jogbox for manual operation Machine dimensions: 1600 x 2700 x 2858 mm Total weight: 4400 kg The machine will be cleaned, serviced, and tested in our facility after receipt of your order. We are pleased to offer you the following optional services: - Transport - Commissioning and operator training - Clamping devices - Dielectric fluid

Year of construction: 2020, condition: ready for operation (used), controller manufacturer: SIEMENS, total height: 1,900 mm, General Data Measurements width 1300 mm Measurements depth 2450 mm Measurements height 1900 mm Control Unit Isdex D Efqspfx Addsal Brand SIEMENS This LAFRANCONI LM 400 die bending machine was manufactured in 2020. It features a NC roller feeder, a max stroke rate of 350 1/min, and a material width capacity of 60 mm. The machine operates with a 20 KN center ram force and a 45 mm stroke. Powered by a 10.6 kW asynchronous spindle motor, it adjusts from 20 to 350 rpm. Dimensions are approximately 2450×1300×1900 mm. Contact us for more information about this machine. Application Types Bending

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Format: 540x720mm Isdpfxex N Dyme Addjal The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: used, Punching machine for, e.g., slipcases with many punching dies Iodpfx Adexw N Ntsdoal

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 4,390 mm, total length: 6,334 mm, total height: 2,465 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping Technical data: Sheet format max. 830 x 1,150 mm Sheet format min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Materials that can be processed: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Isdpfst H Nc Sjx Addjal Features: Automatic non-stop roll cloth in the delivery Stripping station Centerline Quick-clamping frame stripper upper tool and central stripping board Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm punching plate incl. 10x 1mm punching plates 2x 5mm cutting plate 2x clamping frame without Quicklock Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 52EHD146827, Hello, We are selling a Kluge platen press. This machine is capable of hot foil stamping, die-cutting, embossing, and debossing on paper and board up to over 3 mm thick. Maximum sheet size with automatic feeder: 356 x 559 mm Without feeder: 431 x 628 mm The machine is in perfect working condition and remains in daily production. The heating plate is new (worth €5,000). Kluge is still in operation as a company and can provide comprehensive training if needed. Iasdow Udy Njpfx Addel Feel free to contact me for more information.

Condition: excellent (used), functionality: fully functional, Angle Cutter INDUMASCH 260 Iaedpfjxyl Evsx Addsl

Year of construction: 2018, condition: repair required (used), functionality: limited functionality, machine/vehicle number: E01.1.0238.0119.18.1, Demo machine – has not previously been used in production. Being sold due to relocation. The xCUT is the ideal machine for customers requiring all-in-one label production. With the xCUT and a Memjet printer, it is possible to print, laminate, die-cut, and produce a finished label roll in a single pass. › Fully servo-controlled die-cutting unit › Digital printer can be integrated › High-precision re-registration › Integrated laminator The system die-cuts and laminates inline with a printing system at speeds of up to 12 meters per minute, or 28 meters per minute in rotary mode, making it suitable for higher volume jobs as well. Another benefit is that the die-cutting process is not decoupled from the printing process; both can be executed in a single operation. Although these machines may appear complex, they are significantly easier to operate compared to systems in the digital cutting segment. Unfortunately, the machine cannot be fully operated because the unwind unit is not functioning. We believe this could be resolved via a software adjustment, but since we do not have a support contact and the unit is not essential for our production, further effort is not worthwhile. The servo drive batteries should be replaced and the machine generally needs to be properly calibrated. A function test and demonstration can be arranged. We are happy to assist with shipping and disassembly. Die-plates in various formats, laminate, and label rolls are also included. Iedpfexzp H Tox Addsal Schematics / documentation folder available.

Condition: good (used), Year of construction: 2008, Wook IL Automatic Flatbed Die Cutter WTNS-SSF 2500 Max. sheet size: 2500 x 1500 mm Max. speed: 1600 sheets/h Iedpjxtmxkofx Addoal Max. die-cutting force: 600t 400V, 50Hz Year of manufacture: 2008 Pre-feeder, fully automatic hf-technology MFS 2500 HBL, Model 2516 Max. sheet format: 2500 x 1650 mm Min. sheet format: 600 x 450 mm Max. speed: 13,200 sheets/h Max. pile height: 2400 mm (min. 500 mm) Max. pile weight: 2000 kg 400V, 50Hz Year of manufacture: 2011

Condition: good (used), Blumer Atlas D-18 M Label punching machine Professional Swiss-made machine. Perfect condition, like new. Blumer is a leader in label punching. 100% functional and ready for production. This is the model currently in production. Technical specifications: Iasdpfxjx Hqmno Addel Maximum format: 150x180mm Min. format: 24x45mm Cycles: 18-6/min Stack height: 120mm Weight: 600kg The machine is equipped with a hydraulic quick-action unit. Tail on the delivery. Die positioning module, scrap cutting knives, and a die.

Year of construction: 2019, condition: excellent (used), Web width: 500 mm Speed: max 150 m/min Main unwinding - Unwinding with bearings on both sides - Pneumatic roller lift - Servo drive Vacuum cutting table BST web edge control Vacuum station (2x) - Servo drive - Adjustable web width Die cutting station - Servo drive - Pneumatically operated PowerBridge - Easy tool change thanks to Moving bridge Ijdpfxou Iucuj Addeal - Register mark control Rewinder/unwinder - Separate servo drive for winder and auxiliary shaft - Direction of rotation on both sides - Pneumatic clamping - Automatic diameter calculation Tube Scan - web monitoring Web buffer unit ( static) Tandem rewinder - Separate servo drive in each case - Friction shafts - Cutting table for web fixing - Separate display S-CONtrol - Convenient and intuitive to operate - User and recipe management - Display on rail system

Condition: excellent (used), Year of construction: 2023, functionality: limited functionality, Manufacturer: Breyer Extrusion Item: Die, 3 layer die 2300mm 3-layer flat sheet die, 2,300 mm width (die opening) Deckling device for one die (max. 500 mm) Feed-block / distribution block Year of manufacture: 2023 Original purchase price at the time: €365,500 Total price at the time: €444,200 Key technical data of the die: - Total throughput: approx. 700 kg/h - Designed for HDPE material - Gross discharge width: 2,300 mm, adjustable via deckling - Lip opening: 16 – max. 26 mm - Heating: Electric via heating cartridges 400V / 50Hz - Die heating capacity: 137 kW - Co-extrusion adapter heating capacity: 7.5 kW Comprising: - Die (main die body) 3 channels - Co-extrusion adapter - Die body - Die lip body - Attachments / screws - Attachments for deckling and co-ex adapter parts - Attachments for adjustment mechanisms (Note: Photos are from 2023) The die now shows signs of use and is stored disassembled. The heating elements are included but not installed. The die is located in 78224 Singen (Hohentwiel) at the manufacturer’s premises. An inspection on site is possible by prior appointment. Further photos available on request. You are welcome to submit a price proposal. Reasonable offers will be considered. Please provide complete contact details with your enquiry! Delivery may be available for a fee. You are also welcome to inspect the item on site. Please call to arrange an appointment. A quick tip: Become a “FOLLOWER” of ours here on Kleinanzeigen to stay up to date with our latest listings and offers. This item comes from insolvency proceedings and thus shows signs of use. Maintenance and professional cleaning are the responsibility of the buyer. Sale is without any warranty. Liability, reduction or rescission is expressly excluded. An inspection prior to purchase is recommended, as it is sold as seen. All information is provided without guarantee. Errors and changes excepted. The item is sold as inspected on site, in used condition, with retention of title, and under exclusion of liability for visible and hidden defects, especially technical quality, performance, or usability issues. Due to time constraints, we will only respond to serious enquiries and price offers! This is an advertisement for informational purposes only. Inspection strictly by appointment only! Best regards, Isdex A D Emjpfx Addsal Leipziger Sicherstellungs- und Verwertungs GmbH R. Raum, Tel. 0152 31381635

Condition: good (used), Heidelberg OHT „windmill” Letterpress Machine for die cutting, printing, creasing, perforating numbering, etc. The condition of the machine is very good, after inspection. 100% original, without modifications. This is a machine from the end of production, the distinguishing feature of this version is the exclusive roller paws, a drawer under the machine and a large wheel protection cover, a red knob on the piston lever. Iaedpowxtb Ssfx Addel Ink system. Full set of accessories and tools. Machine format 26x38cm Weight 600gsm Speed ​​5000 sheets/h Weight 1200kg Power supply 400V Fully complete, two frames, spare elements, documentation included. A very rare machine on the market.

Condition: new, Die Cutting Machine ML-800 NXL The machine is brand new. It is the strongest machine on market, in this size. Format: 830 x 590 mm Weight: 2500 kg Power supply 380 V Engine: 3 kW Equipment: Iasdpfxjxx Hyre Addjl - Electromagnetic clutch and brake - Quick assembly frame - 3 modes: continuous, with time delay, manual - Central lubrication - additional safety cover - Tools and instructions with documentation CE. We provide installation and training. We provide a warranty of 12 months.

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Iaedpfx Aoxzulzsddel Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Made in Spain. Format 760x1060mm Weight 3600kg Power supply 380V Installed power 4.5 kW Equipment: Iaedpfx Ajwxtcpsddel – pneumatic clutch – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual – central lubrication – safety guards – operating tools – sheet metal for pressure

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual Ijdswxtb Eopfx Addsal – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty.

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Format of the press 855x1230mm Weight 6900kg Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: – electromagnetic clutch and brake – control panel – 3 operating modes: single, continuous, with time delay on opening Iaodjw D E Rvspfx Addjl – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Year of construction: 2025, condition: new, Die-cutting machine ML-1200 NXL Brand new machine. This is the strongest die cutter in this format. Format: 1230 × 850 mm Weight: 5500 kg 380 V power supply Engine: 5.5 kW Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 operating modes: continuous, time delayed, manual – central lubrication – additional safety covers Iajdpfxoumuxxs Addol – operating tools and instructions with CE documentation. The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Europe. Possibility of testing in the showroom in Radom.

Condition: good (used), Adast Grafopress GPE letterpress machine Very good condition, ready for production, after inspection. The machine has all the safety features. Export version. Iedpfxev E A U Nj Addjal The equipment includes printing rollers. The device is used for die cutting, printing, creasing, numbering, etc.

Condition: good (used), ML-800 NXL Die-Cutting Machine This machine is used to cut shapes from a mold (die) from materials such as paper, cardboard, leather, plastics, etc. The machine is in perfect condition, manufactured in 2018. First installed in 2020. This is the heaviest die-cutting machine in this format, precise. Format: 830 x 560 mm Weight: 2500 kg Power supply: 380 V Motor: 2.5 kW Equipment: – Electromagnetic clutch and brake – Quick-mount frame – 3 operating modes: continuous, time-delayed, and manual – Centralized pressure lubrication Iaodpfx Adjxzul Iodel – Additional safety guards – Operating tools and instructions with CE documentation.