Used Die Sinking Machine for sale (89,768)

Condition: used, Year of construction: 2000, functionality: fully functional, PPS DIETLE PPS-ASA-02 Automatic Cutting Machine (Year 2000) Ijdpfx Ajx Srudsddjal Used automatic cutting machine / profile cutting line PPS DIETLE, model PPS-ASA-02, year of manufacture 2000. The system is suitable for automated cutting to length of bar or profile material in series production. Scope of delivery: Machine as shown. Inspection under power possible by prior arrangement.

Year of construction: 2001, condition: excellent (used), functionality: fully functional, voltage 230V 50Hz V Isdox H Tt Ropfx Addsal

Condition: like new (used), Year of construction: 2018, Shrink tunnel Manufacturer: Diez Model: HTC3822 Year of manufacture: 2018 New machine, zero operating hours! Width: 38 cm Infeed height: 22 cm Tunnel length: 130 cm External dimensions: 130 x 80 x 150 cm Iajdpfowtfgpjx Addjl

Year of construction: 1982, condition: used, Processing units: from 3 sides Machine has 6 stations: with horizontal main axis Iaedpscqydrjfx Addol Remarks: Mainly suitable for fine boring parts, but also for valve parts and shaft parts which have to be machined from two sides.

Condition: ready for operation (used), functionality: fully functional, Wurster & Dietz Trimming and Re-Cutting Machine Type FR7 with in-machine adjustment Star-delta soft start Feed roller table Single-blade spiral roller chip separator Chips discharged into a trolley Iedpfx Asv I D Shoddeal Main product on the feed roller table

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, punching force: 300 t, overall weight: 18,000 kg, The equipment has been used very little,it is almost like new, and has under 1,000 operating hours. Max. sheet size: 1060×740mm Min. sheet size: 400×360mm Stock range: Paperboard157~2000gsm Corrugated board (E,B LUTE) Min. gripper edge: 4mm Max. die-cutting size: 1040×730mm Iedpewhvq Iefx Addeal Max. pressure: 250tons Max speed: 7500sph Rules height: 23.8mm Main motor capacity: 11kw Total power capacity: 23kw Dimensions (L×W×H): 6000×4200×2400mm Net weight: 18,000kg

Condition: used, Year of construction: 2004, functionality: fully functional, total width: 3,010 mm, total length: 3,600 mm, total height: 2,800 mm, input voltage: 20 V, compressed air connection: 8 bar, For sale is a PPS Dietle bar-handle automatic machine (GS2 series), suitable for applications in fitting and handle production. This unit comes from industrial use and is offered as a used machine. Ideal for manufacturers of furniture handles/fittings seeking an automated solution for bar/handle components. Iajdpfx Asx Sdyloddol

Condition: used, Year of construction: 2000, Overview  The swing top closing machine was built in 2000 by the German manufacturer Kleindienst. The machine was continuously maintained and is already dismantled and stored. Technical data  Capacity: 18,000 bottles/h  Number of closing heads: 24 Formats: 0,5 l Bügel Lochmund 0,33 l Bügel Kropfhals  Working direction: clockwise Iaodpfswkq Iasx Addol

Condition: used, Year of construction: 1991, functionality: limited functionality, machine/vehicle number: 1155, type of input current: three-phase, Packaging machine DIENST, model HK-II-N-K-14", year of manufacture 1991 Iodpfoxhfgcjx Addsal

Condition: good (used), Used pressure vessel with agitator Last application: Pharmaceuticals / Chemicals Item number: 10882 Volume: 345 litres Type: Vertical on 4 legs Material (product-contact): 1.4571 / AISI316 Design: Single-walled Operating pressure (as per nameplate): -1/ +0.8 bar Operating temperature: 100°C Tank dimensions: Outer diameter: 744 mm Inner diameter: 740 mm Total height: 1,590 mm Total width: 800 mm Total length: 1,200 mm Cylindrical height: 600 mm Materials: Internal: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Fittings/Features: Iedpfx Adew A Inuodsal Nameplate: Yes Agitator: Yes Outlet diameter: 40 mm Discharge height from floor: 335 mm Outlet valve: Disc valve Control cabinet

Condition: ready for operation (used), Year of construction: 2002, A special construction machine service for the carton packaging industry is available. Packaging capacity: 110 cycles/min, min. carton dimensions X/Y/Z: 60mm/20mm/130mm, max. carton dimensions X/Y/Z: 160mm/90mm/265mm, format 1: 72mm/31.5mm/244mm, format 2: 96mm/39mm/240mm, format 3: 87mm/46mm/161mm. Product: Food in blister/tubular bags, chain pitch: 8 inches, rotation deflector: 30mm, cassette belt center distance: 3454.4mm, belt width: 350mm, number of cassettes: 37. Machine dimensions X/Y: approx. 5250mm/1050mm, weight: approx. 2500kg. Documentation available. On-site inspection is possible. Iaodpfev Dkcrsx Addjl

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 700 mm, total height: 2,800 mm, total length: 1,350 mm, total width: 1,260 mm, workpiece weight (max.): 300 kg, table width: 450 mm, overall weight: 2,300 kg, type of input current: three-phase, table length: 888 mm, drilling depth: 500 mm, Technical equipment -4-way guide changer -32-way electrode changer -Preparation for rotary swivel axis -High quality of drive axes and guides Isdpfx Aevppw Soddeal -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining -Extensive measuring cycles -Program transfer and storage via TCP/IP interface -High operating comfort

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: JM325D, HGH start hole EDM machine, fully functional incl. documentation for sale. Iasdpfxexnba Es Addsl

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 39035, National Machinery 750 S3 Operational - Working 5 FORGING STATION Supplied with control process and soundproof cabin Machine Size: 750 S3 Number of dies and punches: 5 Total heading load (kN): 2730 Number of strokes/min. (min/max): 90 Cutoff diameter: 22 mm. Cutoff length (min/max): 4,75/80 mm. Kickout stroke - die (min/max): 19/100 mm. Kickout stroke - punch: 52,4 mm. Motor size (kW): 55 Net weight (kg): 41.500 Isdpfx Adotnhp Rodeal

Condition: new, Fronius RCU 5000i compatible with Fronius TPS 2700 / 3200 / 4000 / 5000 / CMT Remote Control Unit (RCU) for Fronius welding machines: - Adjust welding parameters such as current, voltage, and wire feed speed conveniently from the work area without having to go directly to the welding machine Iaedpfx Aewbiacoddjl - Intuitive display, easy to use - Upload characteristic curves AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE Viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping is no problem! ✔

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 1,460 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, total height: 2,850 mm, total length: 2,500 mm, total width: 2,400 mm, workpiece weight (max.): 6,000 kg, table width: 800 mm, overall weight: 6,000 kg, type of input current: three-phase, table length: 1,800 mm, drilling depth: 500 mm, Technical equipment Iajdjvppxpepfx Addsl -Automatic swivel head +-45 degrees -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining -Extensive measuring cycles -Program transfer and storage via TCP/IP interface -High operating comfort

Condition: used, Year of construction: 1984, The DERITEND ROTADIE 15 is a versatile and robust machine designed for high-quality flexographic printing. Manufactured in 1984, this machine remains in production and is located in Germany. It is equipped with a vacuum feeder and a vacuum dust cleaner to ensure efficient and clean operation. The ROTADIE 15 features four flexo-printing units, allowing for precise and detailed printing capabilities. It supports bottom printing and is enhanced with ceramic rolls and a chamber doctor blade for superior print quality. The machine also includes side track printing units, an electric running register for precise alignment, and an automatic stacker for efficient handling of printed materials. With a maximum sheet size of 1.700 x 1.150 mm and a minimum sheet size of 520 x 600 mm, the ROTADIE 15 can handle a wide range of printing jobs. Its impressive maximum speed of 9,000 sheets per hour makes it a reliable choice for high-volume printing tasks. Format: Max: 1.700 x 1.150 mm min: 520 x 600 mm Equipment: Vacuum Feeder Vacuum Dust Cleaner No 4 Flexo-Printing Units Bottom Printing With Ceramic Rolls & Chamber Doctor Blade Side track printing Units Electric Running Register Automatic Stacker Max. Sheet Size 1.700 x 1.150 mm Iodpfxexizdms Addjal Min. Sheet Size 520 x 600 mm Max. Speed 9.000 Sheets per Hour

Condition: ready for operation (used), operating hours: 3,979 h, functionality: fully functional, mileage: 22,348 km, power: 55 kW (74.78 HP), first registration: 04/2018, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, empty load weight: 1,950 kg, next inspection (TÜV): 05/2026, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 as winter service vehicle Single ownership – ex-municipal / government vehicle A full engine inspection including timing belt, water pump, oil, oil filter, and fuel filter will be carried out free of charge before sale. Machine specification includes the new drive pedal system 2,293 hydraulic hours 3,979 total operating hours 22,348 kilometers Including Kif front brush, type CM 1600, 1,300 mm wide, year 2019 (as new/never used in snow) Including Gmeiner salt spreader, type Husky 500V FS, year 2019 (as new/only tested twice) 4×4 all-wheel drive – hydrostatic all-wheel drive system Reversing camera Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight approx. 1,950 kg Permissible total weight: 3,500 kg Dimensions (L×W×H): 4,016 mm × 1,210 mm × 1,970 mm (without attachments) Driving speed: 0–40 km/h Working speed: 0–24 km/h Noise insulation package Selectable working speeds: 1,600–2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low-emission Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front): 0–50/0–70 l/min at 225 bar Circuit 2 (rear): 0–20/25/30 l/min at 195 bar Hydraulic service brake via foot pedal Cabin with air-suspended driver’s seat Air conditioning / heating Water treatment system Hydrant connection Ijdpfx Asx Dlahsddsal Dosing system Permissible total weight: 3,500 kg Unladen weight: 1,950 kg The spreader is powered and operated via the vehicle’s hydraulics. Other application options available with additional Hako attachments such as sweeping brushes, snow blades, and mowers (not included in scope of supply). Errors, changes, and prior sale excepted. We sell exclusively under our Terms and Conditions and exclude any form of warranty. Errors, changes, and prior sale excepted. We are available Monday to Friday from 9:00 am to 5:00 pm; Saturdays by appointment. Outside these hours, appointments may be made by phone. We are happy to accept your current used machine/vehicle as a trade-in. Sales to commercial operators and exporters are given preference – applies to our entire vehicle inventory. All details are subject to change without notice. Errors, changes, and prior sale excepted.

Condition: excellent (used), Year of construction: 2017, operating hours: 7,166 h, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, total height: 2,815 mm, total length: 3,475 mm, total width: 3,130 mm, This machine is very well maintained and in excellent condition. You can inspect and test this machine under power. Price is ex works, without dismantling. Manufacturer: Mitsubishi Electronic Year of manufacture: 2017 MODEL: MV4800 Operating hours: approx. 7,166 hrs Application type: Wire EDM Machine type: Wire-cut EDM machine Technical Data – Mitsubishi MV4800 General Information Iaedpfsvdu Hzsx Addel Width: 3,130 mm Depth: 3,475 mm Height: 2,815 mm Weight: 5,700 kg Movements X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 510 mm U/V travel: 200 (+/-100) mm Workpiece Diameter over bed: 1,250 mm Diameter over saddle: 1,020 mm Workpiece diameter: 505 mm Maximum table load: 3,000 kg Worktable External length: 1,080 mm External width: 780 mm Price significantly reduced. This machine is being sold due to business relocation.

Year of construction: 1999, condition: ready for operation (used), Working range X/Y: 1200mm/1600mm. Travel Z: 250mm. Max. table load: 80kg/m². Rapid traverse: 500mm/s. Machine dimensions X/Y/Z: approx. 2500mm/2000mm/1700mm. The machine is partially defective. On-site inspection is possible. Isdpfxowty Eae Addsal

Condition: used, Year of construction: 2015, operating hours: 1,464 h, power: 16 kW (21.75 HP), KUBOTA G23-2 HD Ride-On Lawn Mower with High-Dump System, 16.1 kW/22 HP Includes RCK 48 mid-mounted mower, 1.22 m wide, 640 mm grass catcher with hydraulic high-dump system. Engine: 898 cc 3-cylinder KUBOTA diesel engine, Stage V emissions standard, 16.1 kW (21.9 HP) (SAE J1995) * Transmission: HST transmission, load-sensing, max. speed 19 km/h * Mechanical differential lock * Cruise control * Single-pedal steering * PTO drive * Oil-cooled disc brakes * Front turf tires: 16 x 7.5-8, rear turf tires: 24 x 12.00-12 Comfort: * Fully hydraulic power steering, tilt-adjustable steering wheel * Coolant temperature indicator * Hour meter * Tachometer * Easy Checker * Safety system for mower and ground drive * "Kross-Control" single-lever control unit for all hydraulic functions * Integrated front tie-down eyes Mid-mounted mower: * Rotary mower with 2 blades, drive via PTO shaft, electrically operated magnetic clutch, blade drive via spur gear, hydraulic mower lift, central cutting height adjustment 25-102 mm, rotary knob, 13 settings, blade length 673 mm (1.22 m), ground clearance 150 mm Grass catcher: Iasdpfx Adewcagcsdjl * Hydraulic emptying, dumping height (HD) 1.97 m, integrated fill level indicator, including front weight holder, additionally equipped with 2 front weights * Working width: 122 m ----Well-maintained used machine from first owner, good condition - ready for immediate use! Errors and changes excepted!

Condition: excellent (used), Year of construction: 2017, operating hours: 8,500 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, workpiece height (max.): 305 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 820 mm, type of input current: AC, table width: 840 mm, overall weight: 3,500 kg, table length: 640 mm, positioning accuracy: 0.003 mm, ### Price heavily reduced ### This machine is very well maintained and in very good condition. The machine is still in production. You can view and test this machine with power on. Price is ex works, without dismantling. Manufacturer: Mitsubishi Electronic Year of manufacture: 2017 MODEL: MV 2400R MV-R Series – Power for Precision Production hours: approx. 8,000 hours Application type: EDM / wire cutting Machine type: Wire EDM machine Technical specifications - Mitsubishi MV 2400R X-axis movement: 600 mm Y-axis movement: 400 mm Z-axis movement: 310 mm Travel (X / Y / Z) in mm: 600 / 400 / 310 Travel (U / V) in mm: 150 / 150 (+/- 75) Max. workpiece dimensions (W x D x H) in mm: 1050 x 820 x 305 Max. workpiece weight in kg: 1500 Table dimensions (W x D) in mm: 840 x 640 Overall dimensions (W x D x H) in mm: 2687 x 3030 x 2150 Ijdevq Rh Ujpfx Addsal Machine weight in kg: 3500 Price greatly reduced.

Condition: new, Year of construction: 2025, Dimensions 7.00 x 2.30 x 2.40 m Floor 4 mm Sides 3 mm Tarpaulin 650 g/m² black Isdpfxox Hkzlo Addoal Tarpaulin dimensions 7.50 x 2.70 m Elastic rope and eyelets every 500 mm

Condition: new, Year of construction: 2025, closing pressure 240 kN Iodpfx Ajx Hp E Asddoal clamping plate 380x380 mm distance between columns 250x250 mm weight of the machine ca. 3,0 t lock stroke 180 mm capacity of ejector 28 kN ejector stroke 50 mm height of form 120-300 mm column diameter 45 mm casting capacity 43 kN casting plunger stroke 85 m/m injection plunger diameter 36,40,45 mm casting volume (DIN 24480) 47,63,87 cm ³ volume cast pressure 420,340,270 da/cm² casting area 56,70,88 cm 2 Traverse Stroke 150 m/m Equipment of the machine 1.0.2 Cover for drop through area at the subframe with scale/chute 1.0.3 Cover for small parts in the subframe 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1.2 Ejector function package "Technology" including SensiEject 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.0.1.2 Casting assistance package Technology including SensiInject 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.5 Maintenance plus package 5.6.0 Special cable lengths 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.1 Spray rail CR 155

Year of construction: 2007, condition: good (used), • Model: BOBST Autoplatine® SPanthera 106 LER • Machine Type: Automatic flatbed die-cutting machine with stripping and blanking • Manufacturer: BOBST • Category: High-performance die-cutter for folding carton & packaging • Year of Manufacture: 2007 • Production Status: "Machine under power" _____ Format & Substrate Capabilities • Max. Sheet Size: 760 × 1,060 mm • Min. Sheet Size: approx. 350 × 400 mm • Max. Cutting Size: 745 × 1,055 mm • Gripper Margin: approx. 8–10 mm • Paperboard Thickness: 0.1 – 2,000 g/m² (from paper to heavy board) • Corrugated Board: up to N-flute / F-flute (depending on tooling) • Max. Cutting Pressure: up to 260 t (BOBST Autoplatine standard) _____ Production & Performance Iaodpfexzr Hpex Addsl • Maximum Mechanical Speed: up to 9,000 sheets/hour • Automatic Register System: Included • Blanking Capability: Yes (LER = Logistics, Extraction, Removal = full blanking section) • Stripping Section: Fully automatic 3-frame stripping • Non-Stop Functionality: o Non-stop feeder (continuous pile logistics) o Non-stop delivery (automatic pile change)