Used Die Spotting Press for sale (36,345)

Condition: good (used), Year of construction: 1988, machine/vehicle number: 03105, clearance between the columns: 1,300 mm, table width: 1,200 mm, table length: 1,500 mm, Weight: approx. 16,000 kg, table size: approx. 1500x1200 mm, distance between top plate and bottom plate max is 1550mm, with sliding table and separate control/operating panel Nwodpfxotdnnmj Ah Usr

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 47885/05, pneumatic punching of window profiles Stroke 20 mm Nedeff Apiopfx Ah Uowr

Condition: used, Year of construction: 2005, functionality: fully functional, PERFORMANCE AND DESIGN: Pressing Capacity: 26-100 T (adjustable) Maximum Return Force: 45 T Table Dimensions: 1,600 x 1,300 mm Maximum Table Load Capacity: 12,000 kg Distance – Ram to Lower Table (Max.): 1,700 mm Frame Type: 4-column Overall Dimensions approx. (W x D x H): 4,900 x 2,800 x 5,500 mm Total Weight approx.: 17,000 kg T-slots and drillings to DIN 650 – 22 mm HYDRAULIC UNIT: Hydraulic Pump (Brand: REXROTH): SYDFE2x/071R-PPA.. Motor Power: 15 kW Max. Operating Pressure: 200 bar Pressure Accuracy during Pressing Stroke: +/- 5 bar Oil Tank Volume: 475 L Hydraulic Oil Specification: HLP 36 ELECTRICAL SYSTEM ACCESSORIES ELECTRICAL CONNECTION: - Main Supply: 400V AC - Control Voltage: 24V DC - Frequency: 50 Hz - Hydraulic Main Motor Connection: 15 kW - Total Connected Load approx.: 21 kW FEATURES • 180° foldable ram plate up to 7.5 tons (tilted) • Ram ejector 5.6 tons, 160 mm stroke • Stroke extension by 300 mm • Increased speed DOCUMENTATION • Hydraulic diagram • Electrical diagram • Technical drawing • Data sheet Nwodpfx Aexd Tv Doh Usr FUNCTIONS AND DESCRIPTIONS CONTROL OF THE PRESS: The press is operated via the operator panel. • Raise/lower the ram plate • Tilt the ram plate • Extend/retract the table • Operate the ejector • Set press force The control system is Siemens Simatic S7-634.

Year of construction: 1973, condition: good (used), machine/vehicle number: 699, pressure power: 40 t table size: 670 x 470 mm tappet area: 670 x 470 mm passage between columns: 620/470 mm max. mounting height: 740 mm pressure speed: 20 mm/s rapid move: 50 mm ejector power: 3 t electrical connection: 380 V, 9,5 kW space needed: 2200 x 1875 x 3000 mm Nwedpfjy Dpbox Ah Uer weight: 2400 kg

Condition: good (used), Year of construction: 2002, Manufacturer: Millutensil Type: MIL 203 Control: Siemens SIMATIC OP7 Year of manufacture: 2002 Pressure 0 - 250 Bar T Size T-22 Opening force 35 Ton Closing force 150 Ton Distance between columns 2130 mm Table height above floor 770 mm Upper table rotation 180 degrees Specifications Metric US Standard Capacity 30000 Distance between the columns 2130 mm Table length 2000 mm Table width 1500 mm Table height 1500 mm Run-in speed 3900 - 4800 mm/min. Working speed 480 mm/min. Return speed 2100 - 3000 mm/min. Dimensions (approximate) Length Nsdpfowpkv Iox Ah Uowr 6150 mm Width 3500 mm Height 4800 mm Weight 28000 kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend that you verify all important details.

Condition: used, Bending tool, die, upper knife, upper tool, straight tool Nedpfjfcd Imox Ah Uewr -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures -Total length: 400 mm -Total height: 108 mm -Weight: 6.5 kg

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Table size 2600*1800mm maximum daylight 2200 mm clamping force 300T table size 2600*1800mm Nodpfxerl Irkj Ah Uowr max day light 2200mm clamping force 300T

Condition: good (used), Various press brake tools, punches, dies Bending length 2500 + 3050 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Nwsdew Emf Djpfx Ah Usr

Condition: used, Year of construction: 1998, Performance and Design Pressing Capacity: 26–100 t (adjustable) Return Force: 45 t Table: 1,600 × 1,300 mm Max. Table Load: 5,000 kg Distance Ram – Table (max.): 950 mm Frame Type: 4-column Overall Dimensions (W×D×H): approx. 3,400 × 4,200 × 3,700 mm Total Weight: approx. 8,500 kg T-slots/Bores: DIN 650, 22 mm Hydraulics Pump: Rexroth SYDFE11x71RN0030CAM Nwedpfjxd Tiqex Ah Ujr Motor Power: 7.5 kW Max. Operating Pressure: 200 bar Press Stroke Pressure Accuracy: ± 5 bar Tank Volume: 215 l Hydraulic Oil: HLP 36 Electrics Main Supply: 400 V AC Control Voltage: 24 V DC Frequency: 50 Hz Main Motor Connection: 7.5 kW Total Connected Load: approx. 10 kW Features 180° tiltable ram plate (up to 3 t) Ejector in table (3.5 t, 130 mm) Oil ports for core pull Digital measuring system Material feeding (injection molding) via ram plate possible Speed increase possible Documentation Hydraulic schematic Electrical schematic Technical drawing Data sheet (used spotting press, 100t press, Reis hydraulic press, 4-column press, toolmaking press, forming press, injection molding press, used machine, industrial machine, hydraulic press, tool testing press) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all aspects of the national Brazilian safety guideline NR 12, which builds on these standards. Our key strength is special-purpose machine construction and press automation. We offer tailor-made hydraulic presses, press brakes, and guillotine shears at surprisingly affordable prices. We use components from leading European manufacturers for the hydraulics of our presses.

Condition: used, pressure 160 t passage width / mm Nwodpfxsiulkqs Ah Uor stroke / mm Working height 800 mm total power requirement 15 kW weight of the machine ca. 11,8 t - Table size: 1000x1000mm - Distance table/ram, large stroke above, gain. above: 800mm extra information Removable table

Condition: good (used), Hydraulic press TCS - 150T MACH-ID 8821 Manufacturer: TCS Type: 150T Control system: Siemens SIMATIC OP7 Year of manufacture: 1999 Table load sliding table 20000 Kg Table load upper table 9000 kg Table out feed stroke 2100 mm Column diamater 180 mm Closing force 1500 Kn Opening force 700 Kn Laser safe CE Safety Power 15 kW Specifications Metric US Standard Njdpfx Ahsulwzmo Ujwr Distance between uprights 2000 mm Installation height 2000 mm Table length 1500 x 2000 mm ram stroke 1800 mm Starting speed 50 mm/min. Working speed 8 mm/min. Return speed 50 mm/min. Table rotation 0 - 270 rpm Table rotation 0 - 180 ° Dimensions (estimation) length 4800 mm width 5600 mm height 5200 mm Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing with the pictures -Total length: 200 mm -Total height: 188 mm -Weight: 6 kg Nwedjc Spnbjpfx Ah Ujr

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons Nwsdpfedzqmzox Ah Uor good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Year of construction: 2019, condition: refurbished (used), machine/vehicle number: DF0137, pressure:120 t table length:600 mm table width:600 mm stroke max.:400 mm dimensions:1070 x 2340 x 2800 mm weight:4,2 t pre-running speed:10 mm/sec :26 mm/sec :200 l Nwodpfx Ahoffamto Usr Oil cooling (electric):1,5 kW (max) table height:875 mm Working height from to:500 mm diameter of piston:230 mm total power requirement:15 kW pump capacity:24 Lt./sec Pressure power:300 bar :76 mm :650 mm capacity of ejector in table:20 t :150 mm Recommended oil:46er

Condition: good (used), Manufacturer: Millutensil Type: BV 25 PM Year of construction: 1987 Closing force up to 18000 Kg Opening force up to 15000 Kg Driven table in & out feed Upper table 270 Gr Upper size 900 x 550 Specifications Metric US Standard Nwedsrr Ui Ropfx Ah Ujr Distance between uprights 930 mm Installation height 760 mm Table length 755 x 755 mm ram stroke 600 mm Starting speed 1000 mm/min. Working speed 1000 mm/min. Return speed 1000 mm/min. Table rotation 360 rpm Dimensions (estimate) length 1350 mm width 1350 mm Height 2000 mm weight 1500 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures -Total length: 400 mm -Total height: 120 mm -Price: per piece -Number: 2 pieces -Weight: 13 kg Nwsdpfefcd Ilex Ah Uer

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Nodpfx Aowbvmijh Uowr Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: used, Bending tool, die, upper knife, upper tool, straight tool Nwodpoc Spncefx Ah Uor -Tool for: press brake -Tool as: die -Thickness: 25 mm -Drawing with the pictures -Total length: 303 mm -Total height: 171 mm -Weight: 10 kg

Condition: used, One-piece prism block for press brake Bending tool for press brake Reversible prism with 6 different prisms Prism sizes: 30 mm with 3 mm radius for 90°, 40 mm with 4.5 mm radius for 90°, 50 mm with 4 mm radius for 90°, 18 mm for 90°, 10 mm for 90°, 12 mm for 45° Dimensions: 90 x 88 mm Prism length: 3000 mm Nodpjwbvmcjfx Ah Uowr Weight: 147 kg Good condition

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die Nwedsc Spngopfx Ah Usr -Thickness: 25/40 mm -Drawing with the pictures -Total length: 599 mm -Total height: 68 mm -Weight: 28 kg

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Nodsmck Ryspfx Ah Uowr Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Radius: R8 -Thickness: 60/25 mm -Drawing with the pictures -Total length: 569 mm -Total height: 176 mm -Weight: 30 kg Nwedpfx Ahsc Spnhe Uor

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. Nwjdpfxodzp Tcj Ah Uer From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for press brake, die tool Njdpfx Ahsgxgm Ao Uowr -Measures: see drawing in the photos -Dimension: 3060/20 / H79 mm -Weight.: 30.3 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures -Total length: 400 mm -Total height: 99 mm Nwsdjfcd Ikspfx Ah Uor -Price: per piece -Number: 2 pieces -Weight: 9.7 kg