Used Doosan Dx 27 Z for sale (268)

Condition: good (used), Year of construction: 2012, 780mm Swing, 630mm Swing over the Cross-Slide, 481mm Max Cutting Diameter, 790mm max cutting length, 12 Station Turret, Cedj Aggfbspfx Abwshd 76mm bar capacity, 3500rpm, 22kW Spindle, Fanuc i, Tool setter, 10” 3 jaw chuck, Low Volt Light, Tailstock, Swarf Conveyor,parts catcher, Coolant.

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 3,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 60, tool weight: 8,000 g, number of axes: 5, This 5-axis DOOSAN VCF850LSR-II was manufactured in 2021. It features an impressive X-axis travel of 3,000 mm, Y-axis travel of 850 mm, and Z-axis travel of 800 mm. The machine includes a robust tool magazine capacity of 60 tools and a maximum load on the fixed table of 3,500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VCF850LSR-II vertical machining centre we have for sale. Contact us for further details. • Operating hours: approx. 2,500 effective hours • Travels: • B-axis: ±110° • C-axis: ±360° • Rapid traverse (X/Y/Z): 40 / 40 / 40 m/min • Max working feed (X/Y/Z): 20,000 mm/min • Spindle: • Power: 24 / 30 kW • Max torque: 121 / 155 Nm • Taper: ISO 40 • Tool magazine: • Capacity: 60 tools • Max tool dia.: 76 mm (130 mm with adjacent positions free) • Max tool length: 300 mm • Tool-to-tool: 5.5 s • Chip-to-chip: 13 s • Workholding/table: • Fixed table: 3,500 × 870 mm, max load 3,500 kg • Rotary table: Ø 800 mm, max load 1,200 kg • Max workpiece Ø: 1,050 mm • Max workpiece height: 680 mm (vertical) / 1,095 mm (horizontal) • Measurement: Absolute linear scales on X/Y/Z • Features: Removable central door; Pendulum machining capability Cedoz S Hz Uepfx Abwjhd • Utilities: • Electrical: 400 V / 3 phases + ground • Required power: 63 kVA • Compressed air: 6 bar • Coolant tank capacity: 560 l • Condition: Very well maintained • Operational status: In production / under power • Extras: Videos with timestamp available on request • Transport: Reportedly can be transported in one piece Additional equipment • High-pressure through-spindle coolant, 70 bar • Cyclone coolant filtration • Chip conveyor • Renishaw RMP-60 workpiece probe • Renishaw RTS tool setting system • Original kinematic calibration ball • Heidenhain Advanced Function Set 1 • Heidenhain Advanced Function Set 2 • Dynamic Collision Monitoring (DCM) • Lift-Off function • DXF converter • 3D toolpath visualization • 3D machining simulation • CAD Viewer • Automatic lubrication system • Hydraulic unit • LED work area lighting • 3-color alarm lamp • CE documentation • Machine manuals Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2016, operating hours: 11,200 h, Various optical signs of wear and tear. Chsdey Eadajpfx Abwjd

Condition: excellent (used), DOOSAN PUMA 700LMB FANUC 21i-TB (2006) CNC LATHE WITH POWER TOOLS AND “C” AXIS Z-3000 MAIN FEATURES: -CNC FANUC 21i - TB 10.4” LCD Color Manual Guide -Swing over bed: 1,030mm -Swing over carriage: 800mm -Max. Turning diameter: 900mm -Max. Turning length: 3,200mm -Bar capacity: 164mm (ASA-A1-15) -Turning spindle: 45kw 1,500 Rpm Chsdpo Af Il Defx Abwsd -Gearbox -Motorized turret: 12 stations -Powered tools: 11Kw 3,000Rpm EQUIPMENT INCLUDED: -Hydraulic chuck SMW type KNCS diameter 630mm -C-axis 360 (0.001º) -Automatic tool pre-setter -Integrated tailstock -High-pressure pump 70 Bar Hydracell -Chip conveyor -Hydraulic steady rest ATLING (100-420mm)* -Tool holder set including 4 powered tool holders (2 Straight – 2 Angled)* CONDITION: Machine in Excellent Condition. Available for inspection in working order. Immediate delivery.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, feed rate X-axis: 45,000 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC530, spindle speed (max.): 12,000 rpm, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Specifications Chip conveyor and set of tool holder. With hydraulic clamp with control unit. Table dimensions: 1200x540 mm Codj Ah S Etspfx Abwehd Capacity Longitudinal X-travel: 1270 mm Cross Y-travel: 670 mm Vertical Z-travel: 625 mm Spindle Spindle nose: SK40 ISO Spindle speed: 12000 giri/min. Motor power: 18,5 Kw Rapid X,Y,Z axis: 45000 mm/min Tool Stations: 30 nr.

Condition: good (used), Year of construction: 2014, functionality: fully functional, DOOSAN Horizontal Machining Center Model: NHP 5500 Year: 2014 Control Unit: FANUC 31I-MODEL B X-axis travel: 800 Y-axis travel: 750 Z-axis travel: 850 Table length: 500 Table width: 500 Max. workpiece size (length x width x height): D.850x1100 Table surface: Tapped holes Max. workpiece weight: 800 kg Spindle: 10000 rpm with oil-cooled, double-contact flange Spindle connection: ISO 50 Torque (cont. / 10 min): 600 NM Rapid traverse rate (xyz axes): 60,000 Number of tools: 60 Coolant pressure: 70 Bar Coolant tank capacity: 500L Height: 3495 Width: 3930 Depth: 6520 Weight: 18000 Pallet size: 500x500 Chip conveyor: Scraper type -EXTERNAL 4-WAY HYDRAULIC LOCKING SYSTEM, 70 BAR, WITH LOCK/UNLOCK SWITCH -INTERNAL/EXTERNAL AIR BLOW FUNCTION, ADJUSTABLE "M" FUNCTION Chedpfx Abez Apb Towed -AUXILIARY PUMP FOR SHOWER WASHING, CALPEDA 15 BAR -PREPARATION FOR ROBOT ELECTRICAL CONNECTION (FANUC) -INTERNAL TOOL LENGTH AND RADIUS OFFSETTING SYSTEM, RENISHAW TS27R. A NEW, IDENTICAL UNIT IS AVAILABLE IN STOCK IN CASE OF FAILURE. -PREPARATION FOR WORKPIECE MEASUREMENT AND OFFSETTING PROBE WITH RENISHAW RMP60 CYCLES (RADIO TRANSMISSION)

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: i Series, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 4-axis DOOSAN DNM 5700 was manufactured in 2022. It features an X-axis travel of 1,050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • Rapid traverse X/Y/Z: 36 / 36 / 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Power supply: 380 V, 3-phase, 50/60 Hz • Standard-height column • Tool breakage detection • Ball screw nut cooling • Coolant level sensor Chedpfxez Rw U Ae Abwod Additional equipment • 4th axis • Hydraulic system (3A + 1B) • Automatic doors • Robot interface • Chip conveyor • Oil skimmer • Mist collector interface Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2022, operating hours: 389 h, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting • Bar feeder interface • Oil skimmer Cjdpfxoy E I Hio Abwjhd • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA • Unused (like new) • OPTIONAL: HALTER LoadAssistant Universal Big 70 (Robot) • Gripper for Doosan Universal Big 70 • Rotation Station • Workpiece Support • Base Plate 23 mm / 175 mm Big 70 • Machine Interface Box • () Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,900 W, overall weight: 6,550 kg, controller manufacturer: SIEMENS, controller model: 828D, number of slots in tool magazine: 12, number of axes: 6, This 6-axis DOOSAN PUMA 2600 SY II was manufactured in 2020. It features a maximum turning diameter of 376 mm and a turning length of 760 mm. The machine is equipped with a powerful spindle speed range of 20–4,000 rpm and a robust turret with 12 tool stations. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 2600 SY II horizontal turning machine we have for sale. Contact us for further details. • Controlled axes: X, Z, Y, B, C1, C2 • Slant bed: 30°Travels and rapid traverse • B-axis (sub-spindle) travel: 830 mm • C1-axis: ±360° • C2-axis: ±360° • Rapid traverse (X / Z / Y / B): 30 / 30 / 10 / 30 m/minMain spindle • Spindle nose: ASA A2-8 • Hydraulic chuck: 254 mm, 3-jaw Cjdoz N Dhtjpfx Abwehd • Max. torque: 730 Nm • Spindle bore: 91 mm • Drawtube ID: 82 mm • Integrated built-in spindle motor • C1 positioning resolution: 0.001°Sub-spindle • Spindle nose: ASA A2-5 • Hydraulic chuck: 170 mm, 3-jaw • Speed range: 60–6,000 rpm • Motor power: 18.2 kW • Max. torque: 220 Nm • Spindle bore: 62 mm • Drawtube ID: 50 mm • Built-in motor • C2 positioning resolution: 0.001° • Part ejector stroke: 120 mmMachining capacity • Max. swing over bed: 780 mm • Max. swing at front door: 680 mm • Max. swing over carriage: 630 mm • Max. turning diameter: 376 mm • Max. turning length between centers: 760 mm • Max. bar capacity, main spindle: 81 mm • Max. bar capacity, sub-spindle: 49 mm • Off-center milling capacity (Y-axis): 105 mm (±52.5 mm) • Max. cantilever workpiece weight: 260 kg • Max. workpiece weight using sub-spindle: 520 kgTurret and driven tools • Turret type: BMT-65 • Turret indexing positions: 24 • Tool stations: 12 (all 12 driven) • Indexing time: 0.15 / 0.65 sec • Turning tool size: 25 × 25 mm • Boring tool capacity: Ø50 mm / Ø32 mm • Driven-tool speed: 50–5,000 rpm • Driven-tool power: 4.1 / 7.79 kW • Max. driven-tool torque: 79.8 Nm • ER-32 capacity: Ø3–20 mm • Rigid tapping: Yes Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 1,604 h, machine/vehicle number: DHKCEAAHSM6051226, USED DOOSAN HYDRAULIC EXCAVATOR IN GOOD WORKING CONDITION MODEL : D80R SERIAL : DHKCEAAHSM6051226 Chodpoy E Hb Sofx Abwsd YEAR : 2021 HOUR : 1604

Condition: used, Year of construction: 2004, Doosan Mecatec S550LM Slant Bed CNC Lathe with Fanuc Series 21i – TB CNC Control, Swing Over Bed 710, Distance between both Centres 1230mm, Max Turning Diameter 480mm, Max Turning Length 1130mm, Spindle Speeds 30 – 2500rpm, 12 Tools VDI40 Turret, X Axis Travel 300mm, Z Axis Travel 1150mm, Live Driven Tools, C Axis, Machine Weight 8000kg. S/No. LNY – 1008 (2004). Country of Origin: Korea Chjdpe Afm Duefx Abwed Location: This lot is located in Birmingham, UK. A charge of £550 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, lifting height: 4,650 mm, Year of manufacture: 2016 Year of construction: 2016 Chjdpfsy Nw Abjx Abwod Operating hours: 8.740 Empty weight: 8.500 kg Digging depth: 4.175 m = Additional options and accessories = - Rubber tracks

Condition: used, Year of construction: 2020, DOOSAN PUMA 3100LY FANUC control YEAR OF MANUFACTURE: 2020.11 Chuck size: 12 inches Max. turning diameter: 420 mm Max. turning length: 1285 mm Bar diameter: 102 mm Z-axis travel: 1350 mm Y-axis travel: 130 mm X-axis travel: 293 mm TAILSTOCK Live center: SMW AUTOBLOCK Cjdpfx Abszc Nznjwohd - Chip conveyor included - Documentation

Condition: excellent (used), Year of construction: 2016, Swing over bed 600mm, swing over carriage 400mm, 65mm bar capacity, machining diameter 350mm, machining length 330mm, 12 position turret, Fanuc series I control, Spindle 4500 rpm, Chsdpfx Abjz Rz Aqjwod swarf conveyor, tool setter, tailstock

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,738 h, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller manufacturer: FANUC, controller model: i series, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DOOSAN VC 630/5AX was manufactured in 2017. It features an impressive X-axis travel of 650 mm, Y-axis travel of 765 mm, and Z-axis travel of 520 mm. The machine includes a robust table size of Ø 630 mm and can accommodate workpieces up to Ø 730 x 500 mm with a maximum weight of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 630/5AX vertical machining centre we have for sale. Contact us for further details. • A axis travel: +30° ~ -120° • C axis travel: 360° • Rapid feedrate (X/Y/Z): 40 / 40 / 36 m/min (1574.8 / 1574.8 / 1417.3 ipm) • Rapid feedrate (A/C): 20 / 30 r/min • Table size: Ø 630 mm (Ø 24.8 in) Csdpfxsz Hwgpj Abwehd • Max. workpiece size: Ø 730 x 500 mm (Ø 28.7 x 19.7 in) • Max. workpiece weight: 500 kg (130.1 lb) • Total operating hours (ACCESO): 5679 H 6 M • Total working time (TMP LAV): 2748 H 23 M 44 S • Total cutting time (TEMPO TAGLIO): 2400 H 32 M 35 S • Total parts count (PEZZI TOTALI): 103 Additional equipment • Chip conveyor

Condition: used, Year of construction: 2012, travel -x axis 1.630 mm travel -y axis 762 mm travel -z axis 650 mm control FANUC - 0I-MD Spindle speed 12.000 min -1 weight of the machine ca. 13 t Milling machining centers - vertical | DOOSAN - DNM 750 equipped with 30-way tool changer, ITC (20 bar) and chip conveyor. The machine only has 13.686 spindle hours. Chedezw N E Ispfx Abwsd The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM750 | DNM-750

Condition: like new (used), Year of construction: 2019, operating hours: 2,000 h, DOOSAN PUMA GT 2100 B LATHE YEAR OF FIRST INSTALLATION: 2019 CHUCK DIAMETER: 250 mm SWING OVER BED: 600 mm SWING OVER CROSS SLIDE: 390 mm RECOMMENDED TURNING DIAMETER: 255 mm MAXIMUM TURNING DIAMETER: 390 mm Cedpfjzak Dxox Abwjhd MAXIMUM TURNING LENGTH: 550 mm BAR WORK DIAMETER: 81 mm SPINDLE SPEED: 3,500 RPM SPINDLE NOSE: ASA 8 TURRET: 10 POSITIONS TRAVELS: X: 230 mm Z: 580 mm WEIGHT: 3,600 kg

Condition: used, Year of construction: 2015, turning length: 1,000 mm, turning diameter: 210 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 1,050 mm, spindle motor power: 15,000 W, torque: 476 Nm, bar passage: 65 mm, CNC Lathe Manufacturer: DOOSAN Model: TL 2000 L Year of manufacture: 2015 Control system: Fanuc 31i Technical specifications: - Turning diameter: 210 mm - Turning length: 1000 mm Main spindle: - Max. speed: 5,000 rpm - Drive power - main spindle: 15 kW - Max. torque: 476 Nm - Bar capacity: 65 mm Csdjxq R Evspfx Abwehd Travel ranges: - X-axis: 250 mm - Z-axis: 1050 mm - X2-axis: 150 mm - Z2-axis: 1030 mm - Spindle hours: approx. 700 h Equipment & accessories: - Steady rest - Chip conveyor In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: like new (used), Year of construction: 2015, operating hours: 2,500 h, functionality: fully functional, AVAILABLE FOR INSPECTION DURING PRODUCTION DOOSAN HORIZONTAL MACHINING CENTER Cjdpfxez Ihnae Abwshd Model: HM1250 Year: 2015 Control Unit: FANUC 31I-B X-axis travel: 2100 mm Y-axis travel: 1500 mm Z-axis travel: 1500 mm Table length: 1250 mm Table width: 1250 mm Max. workpiece dimensions: DIAMETER 2300, HEIGHT 1725 Max. workpiece weight on table: 40000 kg Spindle speed: 6000 rpm Spindle connection: ISO 50 Torque (continuous / 10 min): 1989 Nm Number of tools: 90 positions High pressure: 70 bar

Condition: used, color: orange, Year of construction: 2017 Operating hours: 6.300 Empty weight: 23.500 kg Cjdozi Ecaepfx Abwohd Track width: 60 cm Digging depth: 10.795 m

Condition: used, Equipment: air conditioning, Year of construction: 2021 Operating hours: 4.771 Empty weight: 36.000 kg Dimensions (LxBxH): 1141 x 300 x 364 cm Track width: 60 cm Digging depth: 6.94 m = Additional options and accessories = Chsdpfjz Akt Djx Abwed - Central lubrication

Condition: excellent (used), Year of construction: 2019, Swing over bed 900mm, Swing over saddle 690 mm, Maximum turning diameter 650mm, maximum turning length 3070mm, bar capacity 165.5mm, Spindle speed 1,500rpm, milling speed 4,000rpm, spindle power 45/37KW, 12 station turret, Fanuc I Plus control. 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor, Csdpfx Absz Ehvfjwohd

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z; 1300 x 670 x 625mm, Codozzzwqjpfx Abwshd Table size 1500 x 670mm, maximum table load 1300 kgs. min-max height spindle to table 150-775mm, spindle speed 12,000rpm, spindle taper BT40, 30 station ATC spindle power 18.5 Kw, Fanuc OI series control, Through spindle coolant.

Condition: used, color: orange, Equipment: air conditioning, Year of construction: 2021 Operating hours: 4.750 Empty weight: 36.000 kg Dimensions (LxBxH): 1141 x 300 x 364 cm Cedpjzb Ndtjfx Abwehd Track width: 60 cm Digging depth: 6.94 m = Additional options and accessories = - Central lubrication

Year of construction: 2021, condition: ready for operation (used), - USED - 8-AXIS TWIN-SPINDLE CNC LATHE WITH DOUBLE TURRET HEAD MAX ROTATING DIAMETER: 230 mm MAX TURNING LENGTH: 230x2 mm MAX TURNING DIAMETER: 230 - 230 mm BAR CAPACITY: 81 mm SPINDLE: 3500 rpm; 18,5-22 kW; 244 Nm; ASA A2-8 COUNTER SPINDLE: 5000 rpm; 15-18,5 kW; 223 Nm; ASA A2-6 X1-AXIS TRAVEL: 165 mm X2-AXIS TRAVEL: 165 mm Y1-AXIS TRAVEL: ±50 mm Y2-AXIS TRAVEL: ±50 mm Z1-AXIS TRAVEL: 700 mm Z2-AXIS TRAVEL: 700 mm Csdpfx Abezbnrpowohd B-AXIS TRAVEL: 730 mm RAPID FEEDS X-Y-Z: 30 - 15 - 40 m/min DRIVEN TURRET HEAD: BMT55P ; 24 + 24 POS; 5000 rpm; 7,5 kW HIGH PRESSURE COOLANT: 35 Bar CONTROL UNIT: DOOSAN FANUC i-series WEIGHT: 9600 Kg OVERALL DIMENSIONS: 3880 x 2360 x 2250 mm ACCESSORIES: PARTS CATCHER ; SWARF CONVEYOR ; PIECE CONVEYOR ; TOOL SETTER ; LINEAR SCALES NOTE: ORE DI LAVORO MANDRINO 9800, CONTROMANDRINO 3000