Used Doosan Dx 27 Z for sale (300)

Condition: used, Year of construction: 2015, turning diameter 210 mm turning length 1000 mm control Fanuc 31i max. turning speeds 5.000 min/-1 drive capacity - main spindle 15 kW max. torque 476 Nm bar passage 65 mm x-axis 250 mm z-axis 1050 mm x2-axis 150 mm z2-axis 1030 mm spindle hours ca. 700 h accessories: Lünette, Späneförderer In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical details: - approx. 500 spindle hours Accessories: - Steady rest - Chip conveyor Nedpfoxq R Evox Abvekw Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2014, operating hours: 240 h, fuel type: diesel, color: white, power: 360 kW (489.46 HP), total length: 4,010 mm, total width: 1,400 mm, total height: 2,110 mm, Power: 417 Current frequency: 50 Hz Voltage: 380/400 Manufacturing country: United Kingdom Njdpfx Abjyiltdevskw

Condition: used, Table: 1200 x 540 mm X Axis: 1020 mm / Y Axis: 540 mm / Z Axis: 530 mm Nkjdpfx Ajyxnk Ijbvew Z Clearance: 150 ~ 680 mm Table Load Capacity: 1000 kg Spindle: 8000 rpm Spindle: ISO 40 / 15/11 kW Automatic Tool Changer: BT40 Tool Holder / 30 Tools Machine Weight: 7,000 kg

Condition: excellent (used), Year of construction: 2020, operating hours: 3,833 h, functionality: fully functional, Turning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and sub-spindle. Manufacturer: Doosan Model: MX 2600 ST Year of manufacture: 2020 Condition: Very well maintained, machine comes from a site closure. Operating times: Control on: 13,127 hours Run time: 3,833 hours Machining time: 2,835 hours The upper head is fed by a tool magazine and can be rotated or milled at various angles. Even highly complex components can be fully machined without additional repositioning. CNC Control: Fanuc 31i-B Nkodpfx Aboywkw Isvew Swing diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Maximum bar diameter (manual/cont.): 76/76 mm Y-axis travel: 230 mm (±115 mm) Chuck (sub-spindle) ASA mount: A2-8 Spindle speed: 4,000 rpm AC motor power (cont./30min.): 22/26 kW Turning/Milling head B-axis rotation / indexing: 240° (±120°) Tool interface: Capto C6 Spindle speed: 12,000 rpm AC motor power (30min.): 15/18.5 kW Number of tools: 40 (Opt. 80) Turret Number of driven tools: 12 (12) Driven tool power: 7.8 kW/30min. Weight: 15.5 t.

Condition: good (used), Year of construction: 2010, Maximum turning diameter 406mm, Nksdpoyizllefx Abvjw Maximum turning length 520mm, bar capacity 65mm, Y axis -/+ 51mm, Spindle speed, 4,500 rpm, sub-spindle speed 4,500 rpm, milling speed 5,000rpm, 12 station turret, 18.5 kw main motor, C axis 0.001degrees, Fanuc I series control, parts catcher, tool setter, swarf conveyor, 3 jaw chucks to main and sub spindles, magazine barfeed

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Integrated turning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and counter spindle. Condition: Very well preserved, machine comes from a company liquidation. Time recording: Control unit on: 13127 hours Runtime: 3833 hours Processing time: 2835 hours The upper head is fed by a tool magazine and can turn or mill at various angles. Even highly complex components can be completely machined without further repositioning. Nksdpfxeyua T Sj Abvsw Fanuc 31i-B CNC control Swing diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Maximum bar diameter (manual/continuous): 76/76 mm Y-axis travel: 230 mm (±115 mm) Clamp (counter spindle) ASA interface: A2-8 Spindle speed: 4000 rpm kW/ AC motor power (cont./30 min.) 22/26 Turning/milling head B-axis rotation / indexing 240° (±120°) Tool holder Capto C6 Speed ??in revolutions per minute 12000 rpm AC motor power kW/30 min. 15/18.5 Number of tools 40 (Opz. 80) Tool turret Number of driven tools 12 (12) Number of driven tools 7.8 kW/30 min. total power requirement 94,42 kW weight of the machine ca. 15,5 t

Condition: like new (used), Year of construction: 2024, Table size 1630 x 760 mm, table load 1500 kgs, Traverses XYZ 1630 x 762 x 650 mm, rapid feedrates 30m/min, Spindle power 18.5 Kw, spindle speed 12,000rpm, 30 station ATC, spindle taper BT40, Njdpfx Absyia Upovekw through spindle coolant, swarf conveyor, Fanuc i series control.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This 3-axis DOOSAN DNM 5700 was manufactured in 2017. It features an X-axis travel of 1050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine includes a table size of 1300 x 570 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • Operating hours: 1,495 h • Travels: • Rapid traverse (X/Y): 36 m/min • Rapid traverse (Z): 30 m/min • Spindle: Nkedpjyv Ezrjfx Abvsw • Torque: 117.8 Nm • Taper: CAT 40 • Table: • Size: 1300 × 570 mm • Tooling: • Tool changer: 30 positions

Condition: used, Year of construction: 2006, functionality: fully functional, turning diameter: 900 mm, spindle motor power: 45,000 W, rotational speed (min.): 2,200 rpm, rotational speed (max.): 7,100 rpm, total width: 2,200 mm, swing diameter over cross slide: 1,030 mm, overall weight: 21,500 kg, center width: 3,000 mm, mount diameter: 600 mm, controller manufacturer: Fanuc, controller model: Series 21i-TB CNC Control, Year: 2006 Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, Between centers: 3000 mm, Swing: 1030 mm, Turning diameter: 900 mm, Nodpfx Aoyxgqasbvokw Fixed steady included, Holders for the turret, Chip conveyor, Spindle motor: 45 kw, Power requirements: 62.2 kva, Dimensions: 7.1 x 2.2 x 2.2m, 10 Position Tool Turret, Tailstock, Machine Weight 21500kg.

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 340 mm, overall weight: 3,100 kg, number of axes: 2, Horizontal turning machine manufactured in 2021. This DOOSAN Lynx 2100A features a maximum turning diameter of 350 mm and a turning length of 330 mm. It is equipped with a spindle speed of 6,000 rpm and a chuck size of 6” (160 mm). If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 2100A machine we have for sale. Contact us for further details. • Chuck size: 6" (160 mm) • Bar capacity through spindle: Ø52 mm • Max turning diameter: Ø350 mm • Max turning length: 330 mm • Rapid traverse (X/Z): 36 m/min • Tool size: 25 x 25 mm (OD), Ø32 mm (ID) • Turret: 12 stations, tool change time 0.15 s • Tailstock: Programmable with rotating tip • Options/features: Doosan tool load monitoring system; Automatic tool setting; High‑pressure coolant 7 bar (1.1 kW); Oil separator; Electrical noise suppression; Bar feeder preparation • Certification/Power: CE certification; Transformer • Operating hours: 2,898 h Nedpjyvqinjfx Abvskw Additional equipment • Basic tool holder set • Oil mist extractor • Chip conveyor • Workpiece collecting box (parts collection) Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2009, operating hours: 42,497 h, functionality: fully functional, machine/vehicle number: L2203458, turning diameter: 510 mm, spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 175 mm, travel distance Z-axis: 330 mm, bar diameter (max.): 32 mm, overall weight: 3,500 kg, Machine type: CNC lathe Manufacturer: Doosan Model: Lynx 220A Year of manufacture: 02/2009 Operating hours: 42,497h (power-on hours, as of 17.12.2025) Max. turning diameter: 510 mm X-axis travel: 175 mm Z-axis travel: 330 mm Spindle speed: 6,000 rpm Spindle power: 11 kW Tool changer: 12 positions Bar feeder: Ø8-32 mm Weight: 3,500 kg Nkjdpfsyxn D Iex Abvjw Transport, collection, and dismantling must be organized by the buyer.

Condition: used, functionality: fully functional, machine/vehicle number: 0039, Year of construction: 2021, operating hours: 849 h, load capacity: 3,000 kg, lifting height: 6,290 mm, free lift: 1,650 mm, fuel type: diesel, mast type: triplex, construction height: 2,850 mm, power: 45 kW (61.18 HP), fork length: 1,200 mm, empty load weight: 5,100 kg, total length: 2,730 mm, drive type: Diesel, construction width: 1,197 mm, Diesel forklift Chassis number: 0039 Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully operational Technical condition: Good Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Nkjdpfx Asyvwt Hjbvew Sideshift, 3rd valve, 4th valve, rear work light, front work light, heater, full cab, CE certificate, safety light, interior mirror, LED,

Condition: used, Year of construction: 2018, As good as new DOOSAN DNM4500 including tool holders Control: Heidenhain iTNC640 Travel: X-800 mm, Y-450 mm, Z-510 mm max. table load: 600 kg clamping surface: 1000 x 450 mm Spindle speed: max. 12,000 rpm tool holder: BT40 tool magazine: 30 seats chip conveyor: . electric handwheel: Heidenhain Njdpfx Asxuagqjbvskw

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,280 h, load capacity: 3,500 kg, lifting height: 5,205 mm, free lift: 1,700 mm, fuel type: gas, mast type: triplex, construction height: 2,515 mm, fork length: 1,500 mm, empty load weight: 5,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,800 mm, LPG forklift Load centre: 500 Mast type: Triplex Technical condition: normal Nksdpfsytkkfjx Abvow Front tyre type: Superelastic Front tyre condition: 80 - 100% Rear tyre type: Superelastic Rear tyre condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear working light, front working light, roof cover, windscreen, full free lift,

Condition: used, Year of construction: 2023, operating hours: 482 h, lifting height: 4,900 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Bobcat D30NXS diesel forklift, year of manufacture: 12/2023, operating hours: only 482h!, rated load capacity: 3,000 kg, fork length: 1,200 mm, lift height: 4,900 mm, triplex mast, hydraulic side shift, engine: [45.6 kW/62 hp], weight: 4,901 kg, very good condition, fully operational and ready for immediate use! We are happy to provide a leasing or financing offer upon request. Mr. Mihm (Tel. ) will be glad to assist you. For more information, please visit our website. Subject to prior sale and errors excepted. Power steering, protective roof Nkjdpfsyxkucox Abvsw = Further information = Lifting capacity: 3,000 kg Closed height: 230 cm For more information, please contact Tobias Ebert.

Condition: used, Doosan Model S 550L CNC Lathe Control Fanuc 21T Swing over bed 710.0 mm Max turning dia 550.0 mm Max turning length 1130.0 mm Chuck dia 400.0 mm Spindle bore 102.0 mm Spindle nose 6 mt Spindle speed 30 – 2500 rpm Spindle motor power 22 kw Turret 12 stations, Nsdpfx Aoyka Syobvokw Feeds 0.001 – 133 mm/rev Rapid X 20m/min Z 24m/min Bar capacity 90.0 mm Tailstock Swarf conveyor Manuals

Condition: used, Year of construction: 2017, operating hours: 524 h, load capacity: 3,000 kg, lifting height: 4,760 mm, free lift: 1,690 mm, fuel type: gas, mast type: triplex, construction height: 2,180 mm, drive type: Treibgas, LPG forklift Mast type: Triplex Nksdpjyfy Ahefx Abvow Transmission: Automatic Front tyres type: Superelastic Front tyres size: 650-10 Rear tyres type: Superelastic Rear tyres size: 28x9-15 Sideshifter, fork positioner, Power steering; wiper; operating weight with superstructure: 4798 kg Front windscreen, half-cab,

Condition: used, machine/vehicle number: 26411, Year of construction: 2013, operating hours: 5,486 h, load capacity: 2,500 kg, lifting height: 3,950 mm, fuel type: diesel, mast type: simplex, construction height: 2,635 mm, Equipment: cabin, sideshift, .: 26411 Machine details: Year of manufacture: 2013 Load capacity: 2,500 kg Lifting height: 3,950 mm Indicated operating hours: 5,486 h Mast type: Standard Mast height: 2,635 mm Length/Width/Height: 2,500 / 1,160 / 2,210 mm Operating weight: 4,200 kg ---- Equipment: * Overhead guard * 3rd hydraulic valve * 4th hydraulic valve * Full cabin * Heater * Front work lights * Rear work lights ----- Attachments: * Side shifter * Fork positioner * Load backrest ---- Further machine information: ---- The stated operating hours are generally read-off hours. We are happy to offer you suitable transport. An additional 250–300 forklifts, attachments, and sweepers are immediately available for you. Rentals also possible! We are happy to buy your used machine. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Interim sale and errors for this offer are expressly reserved. For trade buyers, the machine is sold as-is, not refurbished. All information is provided without guarantee; errors and changes excepted. Nkedpfxeyu Tk De Abvjw

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,000 W, total height: 2,163 mm, total width: 2,005 mm, overall weight: 7,500 kg, product length (max.): 4,438 mm, number of axes: 4, This 4-axis DOOSAN Puma 2600 LYB II was manufactured in 2021. It features a maximum turning diameter of 376 mm and a turning length of 1,350 mm. The machine includes a 12-station turret, a live tailstock, and a steady rest with a diameter range from 40 mm to 200 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600 LYB II horizontal turning machine we have for sale. Contact us for further details. • Capacity • Swing over bed: 780 mm • Swing over carriage: 630 mm • Recommended turning diameter: 315 mm • Max turning diameter: 376 mm • Max turning length: 1,350 mm • Bar capacity: 102–103 mm • Main spindle • Nose: ASA A2-11 • Bearing diameter: 160 mm • Through-spindle bore: 115 mm • C-axis indexing accuracy: 0.001° • Sub-spindle (if equipped) • Speed: 4,500 rpm • Nose: ASA A2-5 Nksdpoytt A Rjfx Abvew • Bore: 62 mm • Turret • Stations: 24 (option installed; standard 12) • Tool size: 25 mm • Boring bar capacity: 50 mm • Indexing time: 0.15 s • Live tool speed: 5,000 rpm • Axes • C rotation: 360° • Rapid traverse • X: 30 m/min • Z: 30 m/min • C: 10 m/min • Tailstock • Type: Live tailstock • Quill diameter: 100 mm • Taper: MT5 • Quill stroke: 100 mm • Motor / Power • Live tool motor: 7.5 / 1.5 kW • Feed motor: 3.0 / 4.0 / 3.0 kW • Coolant pump motor: 0.4 kW • Electrical capacity: 46.40 kVA Additional equipment • 315 mm chuck • MORARI steady rest, 40–200 mm diameter range • Three motorized radial Eppinger live toolholders/spindles • Tool presetting system (tool presetter) Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, machine/vehicle number: 26412, Year of construction: 2016, operating hours: 9,925 h, load capacity: 5,000 kg, lifting height: 4,690 mm, free lift: 1,410 mm, fuel type: diesel, mast type: triplex, construction height: 2,317 mm, Equipment: cabin, .: 26412 Equipment details: Year of manufacture: 2016 Load capacity: 5,000 kg Lifting height: 4,690 mm Read operating hours: 9,925 h Free lift: 1,410 mm Mast type: Triplex Mast height: 2,317 mm Nkjdpfx Aeyg Df Asbvow Length/Width/Height: 3,300 / 1,460 / 2,185 mm Operating weight: 7,550 kg ---- Features: * Overhead guard * 3rd valve * 4th valve * Full cab * Heater * Front working lights * Rear working lights ---- Further equipment information: ---- Operating hours are generally read off the display. We are happy to offer you suitable transport. Another 250 - 300 forklifts, attachments, and sweepers immediately available for you. Of course, also for rent! We are also happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Interim sale and errors for this offer are expressly reserved. For dealers, the equipment is sold as-is, not refurbished. All information subject to change and errors excepted.

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, spindle motor power: 33,000 W, controller manufacturer: SIEMENS, controller model: 828D, number of axes: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information. Additional equipment • Mekiload Gantry Loader • Renishaw Equator • Renishaw Equator • Machine includes a rotary indexing magazine • Machine includes a gantry robot Machine Benefits Qualitative Machine Benefits • Tool change time: 1. 0 second • Max speed (station): 5000 rpm • Holder for turning tools: 25 x 25 mm • Holder for boring bar: Ø50 mm • Coolant pump capacity: 1. 5 kw Technical Machine Benefits • Max. Turning diameter over bed: 780 mm • Max. Turning diameter over slide: 630 mm • Max. Turning length: 760 mm • Main spindle torque: 719 nm • Spindle mount (main): a2 #8 • Sub spindle speed: 6000 rpm • Sub spindle power (30 min): 18. 2 kw • Sub spindle torque: 220 nm • Spindle mount (sub): a2 #5 • Number of stations: 24 (12 driven) Nodpoyr R A Esfx Abvokw Extra Information Machine still under power

Condition: used, Year of construction: 2020, Lathes Travel distance X: 293 mm Travel distance Y :130 mm Travel distance Z: 1350 mm turning length: 1285 mm max. turning diameter: 850 mm max. circulation diameter: 420 mm Nedpfx Aoyrfl Uobvokw spindle boring: 102 mm input Power: 26 kW max. turning moment: 1123 NM range of revolutions till: 2800 rpm Control: Fanuc I-series powered tools control Fanuc The machine offers a maximum turning length of 1,285 mm, a maximum turning diameter of 420 mm, and a maximum swing over bed of 850 mm. The main spindle provides a spindle bore of 102 mm and a speed range up to 2,800 rpm, delivering high torque and stable machining performance. Equipped with a 12-station turret, driven tools, and a FANUC i-Series control, the machine is well suited for complex turning and milling operations in modern production environments.

Condition: used, functionality: fully functional, turning length: 750 mm, turning diameter: 350 mm, spindle motor power: 4,000 W, spindle speed (max.): 4,500 rpm, spindle bore: 65 mm, rotational speed (max.): 4,500 rpm, type of input current: three-phase, bar passage: 65 mm, bar diameter (max.): 65 mm, spindle nose: A2-6, swing diameter over bed slide: 550 mm, overall weight: 3,800 kg, DOOSAN S310SML CNC Lathe with IEMCA MASTER 880MP Bar Feeder Robust and high-performance CNC turning and milling center from Doosan, ideal for precision series production in mechanical engineering. The machine is equipped with a Fanuc Series 18T control system and offers reliable performance as well as high productivity. The DOOSAN S310SML provides a maximum turning length of 750 mm and a maximum turning diameter of 350 mm. The spindle reaches speeds of up to 4,500 rpm with a spindle bore of 65 mm, enabling efficient processing of bar stock. Featuring an A2-6 spindle nose and a swing diameter over bed of 550 mm, the machine offers stable and precise machining characteristics. The powerful spindle motor ensures consistent performance during continuous operation. Additionally, the machine is equipped with an IEMCA MASTER 880MP bar feeder, guaranteeing automated material loading and making the setup ideal for serial production. Technical Highlights: - Control: Fanuc Series 18T - Turning length: 750 mm - Turning diameter: 350 mm - Max. spindle speed: 4,500 rpm - Spindle bore / bar capacity: 65 mm - Spindle nose: A2-6 - Swing over bed: 550 mm Njdpfx Aboyw Riksvjkw - Total weight: approx. 3,800 kg The machine is in good used condition and is ready for immediate operation.

Condition: used, Year of construction: 2021, operating hours: 545 h, Empty weight: 12.500 kg Make of engine: Doosan Bucket capacity: 2,3 m³ Top speed: 40 km/h Tyre brand: Bridgestone Please contact Kristoff Van Havere for more information - Loader bucket 2.3 cub - Bucket suspension - 3 rd function Nodjyrl Ivepfx Abvskw - Like new condition

Condition: used, Year of construction: 2016, Technical details: travel: 1300 mm length: 670 mm width: 625 mm control: Heidenhain TNC 620 spindle turning speed range: 12000 1/min table load: 1300 kg tool change unit: 40 Pos. spindle taper ISO: SK 40 spindle: 17 / 10 kW dimensions of the machine ca.: 3,35 x 2,60 x 3,10 m Nodpfeytrw Hex Abvokw weight: 8,5 t : 40 kVA rapid traverse: 36 / 36 / 30 m/min vertical machining center, touch probe RENISHAW OMP 40-2, coolant tank 325 l / incl. 20 bar high pressure pump (internal coolant supply) air through spindle, el. handwheel, oil-mist suction, chipconveyor, flush gun, approx. 13.000h "machine on", approx. 3.000h "spindle on" inspection under power in factory is still possible *