Used Doosan Hp 5500 for sale (324)

Condition: new, Year of construction: 2024, fuel type: diesel, motor manufacturer: Doosan DP222CC, General information Field of application: Construction Weights Rcodothb Icjpfx Ab Rjh Empty weight: 6.200 kg Functional Generator capacity: 1.000 kVA Other information Fuel consumption: 147 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A49D Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1130 l Transport dimensions (LxWxH): 5x2x2,5 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information

Condition: used, Year of construction: 2021, operating hours: 831 h, Equipment: ABS, Doosan DX 55-9C * Dead weight 5.5 t. * Transport length 5.85 m. Rcjdpfx Asullmdjb Rjh * Transport width 1.88 m. * Transport height 2.56 m. * Bucket capacity min. 0.18 m³ * Track width 400 mm. * Driver protection Kb. * Reach 6.15 m. * 2 x proportional control * Powertilt with Lehnhoff system * Air conditioning * ZLG 5500 KG * Engine 41 KW 56 HP * Blade support

Condition: used, Year of construction: 2007, turning diameter 300 mm turning length 600 mm control FANUC, 18i-TB turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm travel z2 720 mm travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min main spindle drive 22 kW max. torque on the spindle 208 Nm sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. number of driven tool stations 2 x 12 speed of driven tools 5.000 U/min max. torque 47 Nm work piece power 5,5 kW C-axis resolution 0,001 ° Rcedpfexn Amtex Ab Roh rapid traverse x + z axis 20 / 40 m/min rapid traverse y-axis 7,5 m/min total power requirement 68,4 kVA weight of the machine ca. 7,8 t Accessories: collet fixture on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device

Condition: used, Year of construction: 2018, operating hours: 5,156 h, 2018 | Doosan DX235LCR-5 | Used Tracked Excavator | 5156 hours 📍Location: Germany, Wilsdruff 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 115500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 58 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Crawler excavator Doosan DX235LCR-5 from 2018. short tail version. the boom measures 5.80m (basic boom 3.10m, adjustable part 2.90m) and the stick 2.40m. floor plate width 600mm. the condition of the machine corresponds to the value of the operating hours. the machine shows wear on pins and bushings corresponding to the age and mileage as well as the purpose of use, as well as signs of use (dents, abrasions, etc.). at the time of the inspection, the machine ran/functioned without any abnormalities. maintained machine. the sprocket/turas should be replaced. the customer has decided to keep the backhoe bucket after the inspection. the illustrated backhoe bucket is therefore NOT included in the sale! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33296 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Rcodexmv U Iopfx Ab Reh ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2016, operating hours: 11,200 h,

Condition: used, Year of construction: 2008, functionality: fully functional, DOOSAN PUMA 280 LM CHOICE OF TWO MACHINES FOR SALE 2007,2008 TURNING DIA 420 MM MAX TURNING LENGTH 706/1030 76 MM SPINDLE BORE Rodpfxexbgpfs Ab Roch MAX SPINDLE SPEED 3500 RPM 12 STATION TURRET SPINDLE INDEXING C AXIS 0.001 ROTARY TOOL SPEED 5,000 RPM QUILL TAPER 5 MT MAIN SPINDLE 18.5 KW OVER ALL DIMS OF MACHINE NOT INCLUDING BAR FEED 3838 MM LONG X 1670MM WIDE X 1735MM HEIGHT MACHINE WEIGHT 5.9 TON THIS MACHINE WILL COME WITH DRIVEN TOOLING AND A BARFEED

Condition: new, Year of construction: 2024, fuel type: diesel, motor manufacturer: Doosan DP180LB, General information Field of application: Construction Serial number: DV18-OOG10217012 Weights Empty weight: 5.650 kg Rsdpfx Abou Sfnce Roch Functional Generator capacity: 710 kVA CE mark: yes Other information Fuel consumption: 103.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,4x1,8x2,5 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information

Condition: used, Torni CNC Doosan Puma TW2600 Rjdpfx Abew Slx Ue Rsch 2016 (low hours) complete with robot it can be inspected in our warehouse in Gussago BS

Condition: excellent (used), Year of construction: 2011, FANUC 32i A CNC Control Spindle Hours: 8,541h Technical Details Travel over Slide: 900 mm Turning Length: 3,200 mm Travel over Bed: 1,030 mm Standard Turning Diameter: 750 mm Spindle Bore: 110 mm X Stroke: 471 mm Z Stroke: 2,100 mm Rapid Feed - Longitudinal/Transverse: 15/20 m/min Spindle Speed: 3,000 rpm Spindle Motor: 45 kW Turret: 12/6 BMT 85 Electric Motor: Tools: 7.5/5.7 kW Driven Speed: Tools: 3,000 rpm Total Power Requirement: 62.2 kVA Machine Weight: Approx. 22 t Dimensions: 7,357 x 2,710 x 2590 mm Accessories: 12-position turret for driven tools Hydraulic tailstock Rsdpfswqpn Eex Ab Rsch Sandvik Capto C6 tool holders – 4 pcs Hydraulic chuck Ø630 mm SMW Autoblock Hydraulic steady rest (min. 110 mm, max. 530 mm)

Condition: used, Year of construction: 2013, operating hours: 8,935 h, Serial number: 4084xxxx Please contact ATS Norway for more information Rcedpfxevg Nq Ho Ab Reh Please provide reference number upon request: 16505 - Is certified or delivered certified - 8,935 hours - 112,400 km - Good tires - 6-wheel drive - Good box - Central grease - Webasto - Reversing camera - Extra light - 360 kW motor - Radio/cd - 2 seats - Delivery by agreement Dump trucks have a history that the owner can confirm is in his possession. Low hours and seems to be well taken care of Can be delivered by agreement Hours: 8935

Condition: used, Year of construction: 2016, operating hours: 6,800 h,

Condition: excellent (used), Year of construction: 2022, operating hours: 5,500 h, functionality: fully functional, Fanuc control, commissioned in 2023, two turrets, all stations driven, Y-axis on upper turret, sub-spindle, parts catcher, Hainbuch chuck, chip conveyor, short bar loader, accessories. Rjdpfjxnpcuex Ab Roch

Condition: used, Year of construction: 2023, operating hours: 1 h, fuel type: diesel, motor manufacturer: Doosan DP180LA, General information Field of application: Construction Serial number: 20220914013 Weights Empty weight: 4.800 kg Functional Generator capacity: 630 kVA CE mark: yes Rcedpfjw Srarox Ab Roh Other information Fuel consumption: 94.2 Liter / Hour at 75% Load Generator: Leroy Somer TALA473E Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,35x1,8x2,35 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information Surplus unused 2023 generator. Only some visible spots of weather wear on the canopy due to outdoor storage on our previous location at Oudenbosch 2 similar units in stock

Condition: used, power: 102 kW (138.68 HP), fuel type: diesel, Year of construction: 2019, operating hours: 3,035 h, Drive: Wheel Empty weight: 15.050 kg Serial number: N016 Rental currency: EUR Rcsdpfx Abexgz Uto Roh Please contact Jan De Lepeleer for more information

Year of construction: 2015, operating hours: 7,200 h, condition: ready for operation (used), Control Unit Brand FANUC Main Drive Rsdpfx Aboxlvbrs Rsch Spindle speed range 2000 Number of axis 2 Movement X-Axis Movement 352 mm Z-Axis Movement 1105 mm This DOOSAN PUMA 4100B was manufactured in 2015. A robust horizontal turning machine featuring a Fanuc 32i CNC system, it offers a maximum turning diameter of 550 mm and a length of 1,042 mm. Equipped with a 10-station turret and a chip conveyor, it's ideal for efficient machining with 7,200 hours of operation. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 4100B machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2012, Doosan MX 2600 ST , year 2012 Location 78176 Blumberg Turning diameter 760 mm turning length 1540 mm Control FANUC 31i Chuck diameter 254 mm Bar diameter 76 mm Spindle bore 86 mm Turning diameter over bed 1000 mm x-axis 630 x 220 mm z-axis 1585 x 1515 mm y-axis 230 mm Speed 4,000 rpm Spindle nose A2-8 Milling spindle speed range 10,000 rpm Tool changing device 80-fold Rsdpjrcf Dysfx Ab Roch Tool turret 12-position Tool holder BMT 65 P, Capto Drive 26/22 kW Total power requirement 100 kVA Machine weight approx. 15.5 t Space requirement approx. 6.1 x 2.7 x 3.0 m with counter spindle, lower tool turret, driven tools and 80-fold tool magazine Hydraulically operated hollow clamping device 12-station tool turret at the bottom with BMT 65 P Chuck blow-out system spindle 1 and spindle 2 Automatic central lubrication Contour milling with B-axis incl. 4-axis simultaneous machining Internal coolant supply on the counter spindle Automatic tool measuring arm Electronic tool breakage monitoring 2-pressure clamping for the main and counter spindles Automatic shutdown at the end of production Hinged belt chip conveyor 2 x power chucks 250 mm 1 x radial AGW 1 x axial AGW Measuring probe Extended coolant system High pressure and paper belt 80-fold tool magazine Due to high office costs (customs regulations) we do not deliver to Turkey, Iran, Russia and Belarus. Request more information

Condition: used, Year of construction: 2014, operating hours: 9,600 h,

Condition: excellent (used), Year of construction: 2012, Offered here is a Doosan Puma TT1800SY-GL CNC lathe including portal loader. The machine is in good condition and can be inspected under power in our warehouse. The scope of delivery includes various static tool holders and 4 driven tool holders. The machine will be loaded free onto truck by overhead crane. Make: Doosan Model: Puma TT 1800SY-GL Control: Fanuc 31i Year of manufacture: 2012 Technical Data: Turning diameter (lower and upper turret): 230 mm Turning diameter over bed: 230 mm Turning diameter over slide: 230 mm Recommended turning diameter: 210 mm Rcodpfoxmkfhjx Ab Rsh Chuck size (both spindles): 210 mm/ 8 inch Spindle bore: 65 mm Travel: X1-Z1 (upper turret): 165x700 mm X2-Z2 (lower turret): 190x720 mm Y (upper turret): 100 mm A (sub spindle): 770 mm C-axis: 360° (0.001° increment) Feed rates: X1-X2-Z1-Z2: max. 20 m/min Y: 7.5 m/min A: max. 40 m/min Spindle speeds (both spindles): 6000 rpm Spindle power S1: 22/19.6 kW Spindle power S2: 22/18.5 kW Torque (both spindles): 208 Nm Number of tool stations: 24+24 (lower and upper turret) Rotational speed of driven tools: max. 6,000 rpm Torque driven tools: 5.5/2.2 kW (7.4/3.0 kW) Power consumption: 64.86 kVA Dimensions: 3905x2250x2600 mm (machine only) + portal loader

Condition: used, Year of construction: 2010, Engine Power: 245kw Weight: 47500kg Maximum range: 12.15m Digging depth 7.8m Breaking Strength 30.8 kN Engine Manufacturer: Doosan Engine Type: DV11 Rcsdpjuf E Utjfx Ab Rsh Demolition Cage: Included

Condition: used, Year of construction: 2004, operating hours: 10,000 h, Doosan PUMA 2000 LSY with bar feeder Year of manufacture/new: 2004 Operating hours: 9,400 Control: Fanuc 18i-TB Bar feeder: LNS Servo 2 Tool measurement: available Chip conveyor: available Tool stations: 12 positions Axes X: 250 mm Rcodoxizdgopfx Ab Rjh Y: ±50 mm Z: 830 mm B: 830 mm Driven tools available separately on request, see tool cabinet

Condition: good (used), Year of construction: 2009, 750mm Swing, 540mm max. machining diameter, 1020mm max turning length, 5000rpm main spindle, 5000rpm Sub spindle, 65mm bar capacity, 12 station lower turret, 12000rpm milling 18.5kW, Rcsdpfxjw Npz Ie Ab Reh 22kW spindle motors, FANUC 3iTB control, 3 Jaw Power Chucks, tool setter, Swarf Conveyor, Coolant

Condition: used, Control – Fanuc 31i Max. turning diameter: 760 mm Max. turning length: 1540 mm Chuck size: 10" inches Bar working diameter: 76 mm Rjdpfxsxlbvuj Ab Rech Max. spindle speed: 4000 rpm Max. spindle motor power: 26 kW Milling spindle speed: 12,000 rpm Y-axis travel: 230 (±115) mm

Condition: used, Year of construction: 2015, operating hours: 13,120 h,

Condition: good (used), Year of construction: 2007, operating hours: 25,033 h, functionality: fully functional, machine/vehicle number: VMD4500023, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 20,000 rpm, spindle speed (min.): 1 rpm, mount diameter: 40 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,750 mm, total width: 2,480 mm, total length: 3,300 mm, type of input current: AC, torque: 27 Nm, spindle motor power: 11,000 W, Equipment: documentation/manual, The production machine will be available from October 2025! We are pleased to assist you with technical inquiries by phone. Rcsdpjw Sr Nmjfx Ab Rsh

Condition: used, Year of construction: 2014, Engine Power: 209kw Weight: 34980kg Track Width: ~600mm Rsdpfx Abeuf E Uys Roch Digging depth 7.3m Demolition Cage: Included