Used Double Edging Machine for sale (72,566)

Condition: used, Double-sided grinding and polishing machine, MEYER, type SMP Machine no. 848, year of manufacture 1963 Grinding and polishing disc diameter, max. 800 mm Shaft diameter 50 mm Grinding disc mounting, Ø 305 mm Disc spacing 1470 mm Working height 550 mm Podjdzqmhspfx Ag Tjgn Speed 710 / 800 / 950 rpm Drive power 2 x 3 kW Mains connection 380 volts, 50 Hz - Two drive motors, one for each working side - Star-delta switch for each drive motor - Speed change by switching the drive belts - Dust extraction flange, Ø 100 mm - Two corundum grinding discs, 40 mm wide, approx. Ø 560 / 480 mm, are installed Space requirement L x W x H 1700 x 1200 x 900 mm Weight 850 kg Good condition

Condition: used, Welding edge former INDUMASCH SIEGEN type V 12 Machine. No.: 50674 Year of construction 1992 Material thickness max. 40 mm Bevel angle 45° Working speed approx. 3 m/min. Motor power 2 kW Mains connection 400 Volt, 50 Hz - Forward / return - Built-in guide roller for 45° bevel angle - Belt guard missing Dimensions L x W x H 650 x 600 x 650 mm weight 75 kg good condition Pgsdpfx Aerz Tupog Tjn

Condition: used, Technical details: plate thickness: 10 mm Pgsdpfx Asu Ngfqeg Tsn material thickness: 4,5 - 10 mm capacity in W: 2000 Watt voltage: 220 mit 4 Meter-Kabel V machine weight approx.: 18 kg dimensions of machine: L: 550 x B: 120 x H: 260 mm WELDING EDGE SHAPER - GRINDING MACHINE or PLATE SHAPER Hand tool Application: cutting and notching of plate-shaped workpieces Material thickness depends on material (max. 10mm) Tool = lower knife (die) and upper knife punch) optional with accessories As in the picture, for 200,00 Euro *

Condition: used, Disc sander with spindle sander KURT EHEMANN type V K8 Combined drum sanding machine - double sanding machine, cylindrical rod sanding machine Machine no. No. 6812420 Year of construction 1968 Sanding disc diameter 800 mm Table support on sanding disc 900 x 300 mm Sanding disc speed 940 rpm Table height of sanding disc 900 mm Spindle sanding unit with sanding sleeve Ø 50 mm Table support for spindle sanding unit Ø 500 mm Pjdperk U Edefx Ag Tjgn Table height spindle sanding unit 1000 mm Spindle sanding unit speed 1410 / 2420 rpm pole-changing Motor power sanding disc 3 kW Motor power spindle grinding unit 1.1 / 1.6 kW Mains connection 380 Volt, 50 Hz - inclinable sanding table, 30° downwards/ 15° upwards - the entire table can be swiveled away from the plate for changing sandpaper - Spindle sanding unit with clockwise/anticlockwise rotation (1410 rpm for clockwise rotation, 2420 rpm for anticlockwise rotation) - Spindle sanding unit with oscillating stroke movement 10 mm - Height-adjustable grinding spindle in the table - Spindle sanding unit with inclinable rotary table, inclinable by approx. 30° - Rotary table with removable segment inserts Ø 54 / 84 / 308 mm - Pipe connection for extraction system, rectangular 100 x 170 mm Space requirement L x W x H 1500 x 1100 x 1400 mm Weight 550 kg Very good condition

Condition: used, Riveting machine, double riveting unit with rotary indexing table, DUNKES Type DN 4 Rotary table, rotary indexing table with SIEMENS control Machine No. P 81 - 5458, Year of manufacture 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Overhang 190 mm Rivet head stroke per riveting unit approx. 60 mm Rivet spindle speed approx. 1400 rpm Installation height, tool - counter-tool max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Mains connection 380 Volt, 50 Hz - Rotary table, indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame relative to the rotary table - Table size Ø 295 mm for holding round workpieces - Pneumatic riveting stroke Pedpedzp T Nsfx Ag Tegn - Riveting unit adjustment via geared motor with leadscrew, positioning via adjustable microswitch - Modernization of the control system and conversion of the servo drive in the rotary table in 2009 - New electrical control cabinet with Siemens Simatic Panel - Year of manufacture 2009 - Riveting time can be programmed continuously - Riveting pressure can be adjusted continuously via pressure gauge - Micrometer stop for limiting the stroke of the counter-rotating riveting units 0-60 mm Space requirement L x W x H 3200 x 1250 x 2400 mm Weight approx. 2500 kg Good condition The machine was used for riveting segment saw blades with diameters of 400 to 2000 mm. The segments were manually placed on the support disc and fixed with straight rivets. The counter-rotating riveting unit rivets the shank simultaneously from both sides. The controlled table automatically rotates to the next working position. Ideal for saw blade manufacturers and repair companies. Or for building a special-purpose machine.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total length: 3,350 mm, working width: 400 mm, grinding width: 400 mm, overall weight: 4,800 kg, power: 34 kW (46.23 HP), Equipment: documentation/manual, double-sided, Edge sanding machine / Parquet sanding machine Manufacturer: VG Machines Type: F/G 455 2 KS / 2KS Year of manufacture: 2018 Machine comes from a parquet manufacturing facility In-line design / Wide-belt machine (movable upper section) for calibrating and sanding from both top and bottom in a single pass Working width approx. 400 mm Equipped with: 1x Calibrating roller, top, approx. 11 kW 1x Sanding shoe, top, 5.5 kW 1x Calibrating roller, bottom, approx. 7.5 kW 1x Sanding shoe, bottom, 5.5 kW Sanding belt dimensions: 455 x 1900 mm Pjdpozamapofx Ag Tsgn Feed speed steplessly adjustable, max. 16 m/min, motor approx. 2.2 kW Voltage: 400 V Total connected load: approx. 34 kW

Condition: excellent (used), Year of construction: 1999, Manufacturer: WEGOMA Model: KS 2400 Category: Edge sanding machine Year of manufacture: 1999 Table width: 300 mm Table length: 730 mm Total units: 1 Max. sanding belt width: 150 mm Sanding belt length: 2,400 mm Main motor: 1.85 kW Sanding sleeve Round sanding support Oscillation Pjdpfx Agjyza Ahs Tjgn Height adjustment: Table, manual Sanding belt tiltable: Yes Required length: 1.7 m Required width: 0.8 m Required height: 1.5 m Location: ex-stock 54634 Bitburg - immediately available - Subject to prior sale

Condition: used, tiltable up to 90 Grad sanding width 180 mm Motor output 1,6 kW Lightweight, swivel-mounted MetaboType Tba 1018D edge sanding machine for precise sanding of straight and curved wooden edges. The lightweight design and powerful motor enable a uniform sanding pattern with a high removal rate. Ideal for small joineries, furniture making and interior finishing. Includes original Metabo base frame. Pjdpfxoy T Sa No Ag Tsgn

Condition: used, Storage location: Sonnefeld Pgodoway Dcjpfx Ag Ten

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Pgodevvkd Tspfx Ag Ton

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Pgjdsvvkfdopfx Ag Ton

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Storage location: Nattheim Pgjdpsvvkfqjfx Ag Tjn

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Podpfx Agsvvkfwj Tjgn Storage location: Nattheim

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Storage location: Nattheim Pgodpfxsxyiils Ag Tjn

Condition: used, Year of construction: 1999, Edge height: 10 - 60 mm Edge thickness: 0.4 - 3 mm Min. curve radius: 20 mm Feed speed: 2 - 18 / 4 - 14 m/min. Motor: 5.2 kW Air pressure: 6 bar Dimensions: 900 x 1300 x 1200 mm Weight: approx. 350 kg Storage location: Nattheim Pedpoymcrbsfx Ag Tegn

Condition: used, functionality: fully functional, Screening area: approx. 1,200 x 2,400 mm 5.5 kW electric motor Pedpfxswm Nfcs Ag Tjgn with piping and water spray nozzles Semi-mobile steel structure with bypass platform

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: W261, repeat accuracy: 0.05 mm, workpiece weight (max.): 6,300 kg, working length: 4,000 mm, working width: 2,250 mm, working height: 230 mm, No minimum price – guaranteed sale to the highest bidder! The machine’s last inspection was carried out by a specialist company at the end of 2025! The machine can be inspected while powered on. TECHNICAL DETAILS Working area X: 4,000 mm Working area Y: 2,250 mm Working area Z: 230 mm Working area for round part machining, diameter max.: 440 mm Psdpfezcwupjx Ag Togn Working area for round part machining, length max.: 3,700 mm Number of cutting heads: 1 to 4 Cutting carriage distance: max. 1,150 mm Positioning speed, axis-parallel X, Y max.: 60 m/min Positioning speed, simultaneous max.: 84 m/min Cutting speed max.: 50 m/min Travel speed min.: 0.001 m/min Machine tolerance according to VDI/DGQ 3441: ± 0.1 mm/axis Repeatability: ± 0.05 mm/axis Load capacity of the frame max.: 7,000 kg Load capacity per grating bar: 110 kg Number of grating bars max.: 70 Workpiece weight, flat part max.: 6,300 kg Workpiece weight, round part max.: 500 kg MACHINE DETAILS Waterjet source: Bypump 50 APC Operating pressure: max. 3,800 bar Flow rate: 0 to 5 l/min Nozzle size in single-head operation: max. Ø 0.4 mm Nozzle size in dual-head operation: max. Ø 0.3 mm Nozzle size in dual-head operation: recommended Ø 0.28 mm Dimensions & Weight Machine dimensions (L x W x H): approx. 9,000 mm x 7,550 mm x 2,050 mm Weight: approx. 10,000 kg Operating Hours Operating hours: approx. 41,130 h Cutting hours Head 1 / Head 2: 13,720 h / 956 h EQUIPMENT CNC rotary axis Motorized cutting carriage distance adjustment Four-jaw chuck Abrasive hopper Spare parts PC with pre-installed programming software Note: The second head has been removed, and the cutting mechanism has been mounted on Head 1 as a spare part. However, after acquiring a new cutting head, the system can operate with two abrasive tools. The drilling spindle is seized. The crane and lifting device are not included in the scope of sale.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, The machine is in good condition, has been in use until recently, and is now available for sale due to a new purchase. The machine has been regularly serviced. It is ideally suited for sanding solid wood, both straight and profiled parts. Pgedpfxozdvupe Ag Tjn The processing side, with its guides, features an adjustable sanding shoe. The feed mechanism is an ideal addition for finer edge sanding on straight edges. The machine has a compressed-air-operated belt oscillation for optimal sanding results. The machine has a chassis. Various sanding belts are included.

Condition: good (used), Year of construction: 2007, Double sided edge bander HOMAG KFL 526 for sale in good condition. Pgedpezgr Absfx Ag Ten

Condition: used, Year of construction: 2006, BACCI DOUBLE is a double head CNC machining center with 10 interpolated axes, numerically controlled, equipped with automatic hopper feeder. DOUBLE is designed for joinery operations as: tenoning, finger jointing, boring, mortising, milling, both at the ends of the elements and also between the ends. • Serial number AB 059, • 380 V, 50 Hz, 50 kW, • OSAI control, • Axes o X-axis 2400 mm, o Y-axis 650 mm, o Z-axis 1000 mm, o A-axis 360°, o B-axis 260°, • Machining dimensions: L min. 150 mm, L max. 2400 mm, W max. 250 mm, H max. 100 mm, • Input speed X, Y and Z axes 50 m/min, • Max. tool diameter 200 mm, • 4 tool positions per machining side, • 2 pneumatic clamps, • Spindle taper ER 32, • Spindle information right side: Speed 12000-24000 rpm, Power 7.4 kW, • Spindle information left side Page: Speed 12000-24000 RPM, Power 7.4 kW, Psdpfex Dib Njx Ag Tjgn

Condition: used, machine/vehicle number: D 395T5, With the NOVA-3 tenoning machine, two rounded tenons of different sizes and inclinations can be produced at both ends of a solid wood part at the same time. The innovative technology of the NOVA-3 makes it the leading double-sided tenoning machine on the market. Pgodpfsxrpkmox Ag Ton ROBUST MECHANICS Torsion-free, stress-free annealed steel welded construction, large-dimensioned processing units with supports and slides made of gray cast iron, absolutely vibration-free. Mechanics designed for high operational reliability with the highest production output. USER FRIENDLINESS The new swivel system of the processing units enables short set-up times, in which the position of the tools always remains constant when swiveling around the vertical as well as the horizontal axis, i.e. the swivel point always corresponds to the tool position. Even if the inclination changes, the shoulder length of the workpieces remains the same. FLEXIBILITY NOVA-3 is an extremely versatile processing machine. The large and reliable mechanics, the sophisticated design of the processing units and the innovative swivel system allow both short, heavily deformed workpieces and large parts to be machined with equal precision and high cutting performance. For the latter, the stable machine structure and the performance of the motors are a decisive factor. The flexibility is further underlined by the range of loading magazines; Depending on requirements, the customer can equip his machine with the ADR or APPC automatic loading system. The workpieces are loaded from suitable reference points. The processed parts run out at the bottom of the machine and can therefore be easily removed by the operator, transferred to a conveyor belt or placed in a container. No manual intervention is required for this, the operator only has to load the magazine.

Condition: excellent (used), Type: K77 - Year of manufacture: 1995 - Table size: 970 × 180 mm - Operating voltage: 400 V Podey Sap Aepfx Ag Togn - Supply voltage: 230 V - Power: 2.4 kW - Frequency: 50 Hz - Incl. sanding belts: 12 pcs grit 120; 4 pcs grit 80; 10 pcs grit 150

Condition: new, functionality: fully functional, Sotecco Double Brush Machine – 2x12 Brushes Pedswqxdcspfx Ag Tsgn Double brush machine with stainless steel construction Brand: Sotecco Number of brushes: 2 x 12 Brush width: 2 x 2000 mm Overall dimensions: 2600 x 1600 x 2900 mm Includes pallet with 2 control cabinets Never used!!!

Condition: excellent (used), functionality: fully functional, Volpato LBO 60 belt grinder Table length: 3000 mm. Pgodpfxezd Ethj Ag Tsn Table width: 1100 mm. Vertical travel: 680 mm. Maximum belt length: 8500 mm. Belt width: 150 mm. Belt feed motor power: 5.5 HP Table lifting motor power: 0.5 HP Dust extraction motor power: 1 HP Belt speed: 18 m/s Overall dimensions: 4500 x 1500 x 1500 mm. Weight: 600 kg.

Condition: new, Catalogue No.: HZ014 – Pre-milling – Corner rounding – Brand new machine in stock – CE certificate – Professional grade TECHNICAL DATA Panel thickness: 8–45 mm Edge thickness: 0.4–3 mm Min. panel width: 90 mm Min. panel length: 170 mm Feed speed: 9 m/min Pre-milling speed: 12,000 rpm Front/rear milling: 12,000 rpm Top/bottom milling: 12,000 rpm Corner rounding: 12,000 rpm Polishing: 3,000 rpm Feed motor power: 1.13 kW Glue tank heating power: 1.315 kW Pre-milling motor power: 1.5 kW Preheating power: 0.4 kW Glue spindle power: 0.25 kW Front/rear milling motor power: 0.22 kW Top/bottom milling motor power: 2 × 0.37 kW Corner rounding motor power: 0.37 kW Polishing motors: 0.12 kW and 0.18 kW Total motor power: 6.16 kW Working table height: 960 mm Psdpsza Emhofx Ag Tsgn Extended support width: 560 mm Extraction port: 3 × 125 mm Dimensions (L × W × H): 3731 × 720 × 1636 mm Weight: 915 kg Holzing G-MAX 480 straight-line edge bander with pre-milling, saw cutting, top-bottom milling, corner rounding, radius scraper and polisher ensures a high-quality finish on the workpiece. It handles edge banding from coils up to 3 mm thick and strips up to 4 mm thick. The machine is equipped with a 1.2 kg capacity glue tank. Net price: 98,000 PLN Net price: 23,300 EUR based on an exchange rate of 4.2 EUR (Prices may change in the event of significant fluctuations)