Used Dowel Hole Drilling Machine for sale (66,005)

Condition: good (used), Year of construction: 2008, CNC Deep Hole Drilling Center Machine type: Degen UTB800/G Control: Heidenhain TNC310 Year of manufacture: 2008 TECHNICAL DATA: Travel distances: X-axis: 630 mm Itjdpowxaf Rofx Addsb Y-axis: 400 mm Z-axis: 800 mm W-axis: 600 mm Feed rate: 6,000 mm/min Swivel range: Z: +/- 10° Table size: 1,100 x 650 mm Max. table load: 2,000 kg Tool holder: HSK 63 Max. speed: 4,000 rpm Drive power: 7.5 / 5.5 kW Drilling diameter: 4–25 mm Accessories: Electronic handwheel High-pressure pumps Internal cooling (IKZ): 0–90 bar Coolant tank: 600 l Paper band filter

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Itodsxwaz Hspfx Addjb

Condition: good (used), Year of construction: 2007, functionality: fully functional, drilling depth: 1,150 mm, overall weight: 12,000 kg, drill diameter: 32 mm, Heidenhain iTNC530 cnc control 12-fold tool changer Technische Daten / technical details: Wege: / travels: X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Isdswcldaopfx Addjtb Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm B-Achse (Rundtisch) / B-axis (rotary table) 360 ° A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Gewicht der Maschine ca. / weight ca. 12000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. For more technical details please look at the photos

Condition: good (used), Year of construction: 2009, operating hours: 20,709 h, functionality: fully functional, machine/vehicle number: 106516-11, drilling depth: 1,200 mm, overall weight: 7,500 kg, For sale: A very well-equipped deep hole drilling machine from TBT, including various accessories. Drilling specifications: - Spindle 1: 5–18 mm; Spindle 2: 1–4 mm - Drilling depth: approx. 1200 mm with Ø8 mm using 3 steadies - Number of spindles: 2 - Spindle drive: Spindle 1: 1 x 4 kW; Spindle 2: 1 x 1.2 kW - Spindle speed: Spindle 1: 600–6000 rpm; Spindle 2: 2000–24000 rpm - Rapid traverse: 15,000 mm/min - Saddle stroke (nominal): 1800 mm Ijdoxgnhaepfx Addetb - Coolant: Deep hole drilling oil - Tank capacity: 1,100 liters - Operating voltage: 3AC 400V, 50Hz (Total connected load: 25 kW) Condition: Good, appropriate for its age Accessories: Includes drip tray and various drills On-site inspection is recommended!

Year of construction: 2013, condition: used, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Ijdpfxox E Ingj Addjtb Year of manuf. : 2013 In general: Drilling-ø (max.):3,5 mm Drilling depth (max.):200 mm Deep drilling module: Technology:Drillingspindle Speed (max.):10.000 rpm Power:3,5 kW Taper:HSK-A40 Equipment/Accessory: Chipmanagement:Chip tray Coolingmanagement:Internal cooling unit with Filter and High-pressure, 140 bar Workpiececlamping:Collet chuck, SMW Autoblok KSZ-MB-040-Z140 Oilmistseparation:Electrostatic extraction, LTA AC 500 Further Accessory:Misc. Single lip driller

Condition: good (used), Year of construction: 2012, Technical data – SD22P • Table dimensions: 410 x 210 • Maximum workpiece dimensions: 650 x 420 x 240 • Table travel: 300 x 200 • Electrode stroke: 370 • Guide travel: 100 • Column travel: 100 • Spindle speed: 200 RPM • Electrode diameter: 0.1 to 3.0 • Electrode length: up to 400 Distance between guide and table • Standard: 50 to 240 • Maximum: 300 Installation / mechanics • Required floor space: 120 x 130 x 210 cm • Weight: 750 • Dielectric tank: 20 L • Filter: cotton / paper Electrical • Voltage: 200 V, 220 V, 346 V, 380 V, 420 V, 440 V (575 V Canada new) • Power (standard): 4 kVA • Switching device: Power FET Settings • T-ON: 0 to 99 • T-OFF: 0 to 99 • IP: 0 to 15 • STAB: 0 to 9 • GAP: 0 to 9 • SERVO: 0 to 9 Current • Amperage: 25 A • Option: 50 A Disclaimer • Technical data are provided for information only, may contain errors, and are subject to change at any time without prior notice. Itodpfxjx Tquxe Addjb

Condition: used, Hole rows + fitting drilling machine LAUTENSCHLÄGER Meplamat 300 pneumatic hold-down device, pressing device, Iedpfxovtm Aye Addjtb stop rulers

Condition: used, GANNOMAT Compact 30 hole drilling machine - used - pneumatic clamps, foot control, 2 drilling beams with 15 spindles each ----- Technical specifications ----- Number of spindles: 30, Drill spindle spacing: 32 mm, Itodpfx Aowmmt Roddob Motor power: 2 x 0.75 kW, Voltage: 400 volts, Pneumatic connection: 6 bar, Dimensions without stop ruler: 850 x 1,100 mm, Weight: 240

Condition: good (used), Year of construction: 2008, IXION TL 1001 CNC Deep Hole Drilling Machine with Equipment Year of manufacture: 2008 Control system: MITSUBISHI M530 Itedpfjx Tdwaox Addob Machine number: 950521 Drilling depth (Z), CNC controlled: 1,000 mm Drilling unit (Y), vertically traversable: 800 mm Table size: 1,200 mm x 700 mm Table load: 3,000 kg Table longitudinal travel (X): 1,000 mm Table displacement (W): 1,000 mm Table rotatable by 360° Spindle: SK 40 Spindle speed: 100 – 4,000 rpm Max. drilling capacity in steel: 25 mm Max. thread cutting in steel: M20 Milling in steel possible Weight: approx. 3,500 kg Equipment: Compact belt filter KBF Electronic handwheel Coolant system Chip conveyor KBF 270 P50 Included in delivery: Deep hole drilling tools Workplace with: Holders / mounting brackets / supports / sealing discs Operating manual/documentation Machine parameters on storage medium For equipment, technical data, installation & transport – see PDF. Image, content, and details are provided without guarantee and therefore not binding. All additional accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery includes only the accessories explicitly listed here, in the order confirmation and invoice. FCA (Free Carrier, loaded on truck) D-04643 Geithain packaging only Lead time: immediately Subject to prior sale / Payment due immediately upon purchase

Condition: repair required (used), Year of construction: 1996, For sale is an IXION TL 601 deep hole drilling machine. Unfortunately, the machine is experiencing electrical problems. Constants need to be reset by a technician, and the backup battery needs to be replaced. New LCD display was recently installed. New LED display. Machine No. 950192 Year of manufacture 1996 Manufacturer: Maschinenfabrik IXION Otto Hafner Itodpfsh Dpv Rjx Addeb -Travel paths + Quill Tl 601 (Z) 600 mm + Vertical drilling unit (Y) 300 mm + Transverse table (Table surface 1200 mm x 600 mm) (X) 700 mm + In drilling direction (W) 1000 mm -Clamping table + Table surface (standard) 1200 mm x 600 mm + Table load (T1200) 1000 kg -Tool holder + SK 40 holder according to DIN + Pull stud 69871 According to DIN 69872 -AC main spindle drive 3.0 kW + At 100% duty cycle, S1 5.5 kW At 50% duty cycle, S6 7.5 kW +Spindle turning speed Directly programmable 100-4000 rpm Performance: +Drilling capacity in steel 2312 D 32 mm +Tapping M24 -Weight / Dimensions Weight 2500 kg Length approx. 4230 mm Width approx. 1885 mm Height approx. 1870 mm All prices plus VAT We can deliver and commission the machine. All prices plus VAT Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours?

Condition: used, Electro-pneumatic universal dowel hole drilling machine Scheer type DB4 for precise drilling of dowel holes in wood materials. The machine enables efficient and precise work thanks to several synchronously working, horizontal and vertical drilling spindles. Ideal for furniture and interior construction as well as for series production in woodworking. division: 32 mm drilling spindles: 2 x 25 Itedev Hnr Aopfx Addob Spindle distance: max. 768 mm

Condition: used, Working width: 720 mm working width: 820 mm Max. passage: 45 mm Ijdelfcn Ejpfx Addotb Max throughput: 120 mm Drilling depth vertical: 45 mm, horizontal: 120 mm

Condition: used, Year of construction: 1993, Machine: Double-sided through-feed operation with additional: 4 drilling supports vertically from above 4 drilling supports horizontally from behind Units: Tiltable Workpiece length (mm): 330 - 2500 Workpiece width (mm): 40 - 180 (200 mm for straight cuts) Workpiece thickness (mm): 15 - 80 mm Dowels (mm): 8 + 10 + 12 x 30 + 40 + 50 Dowel projection (mm): 10 - 25 Machine dimensions: Itodpfx Ajwbuw Tjddsb Length (mm): 8040 Width (mm): 5850 Height (mm): 2500

Condition: used, machine/vehicle number: MR006800, Used oscillating drilling machine, manufacturer PADE Technical specifications: - Drill head speed: 9000 rpm - Drill chuck capacity: 13 mm Isdpfexxym Eox Addjtb - Drilling depth: 80 mm - Drill head adjustment (height): 100 mm - Weight: 450 kg

Year of construction: 1983, condition: used, machine/vehicle number: 508323, 21-spindle, pitch 32 mm Itjdpfxjdardxo Addsb tool holder M 10 external thread spindle distance max. 640 mm Gantry passage max. 1056 mm, stop length 2500 mm with 4 swiveling stops drilling unit with motor 2,2 kW drilling head swiveling, drilling from below height adjustment max. 80 mm drilling depth max. 80 mm, ex location Seevetal, as viewed, subject to prior sale

Year of construction: 1977, condition: ready for operation (used), Precision dowel boring machine. Pneumatic clamping, 2 drilling units, swivelling (0-90 degrees). Working width approx. 1200mm. Inspection possible by appointment. Itodpfxjx Ecu So Addsb

Condition: used, Year of construction: 2016, machine/vehicle number: M99955/3533513, Pipe Cutting Machine FZH VARIO 2 with 2.9m Magazine (Year 2016) Automatic pipe cutting line VARIO 2 by FZH Maschinenbau GmbH, manufactured in 2016. This line is designed for the cutting to length of round pipes and has been used in serial production of furniture fittings. The system comprises a magazine with singling system, feed unit, pipe cutting head, as well as extraction and deburring unit. Application areas: – Automatic cutting of round pipes in series production Iodpfsx Hqd Tox Addstb – Pipe diameter approx. Ø 6.0–78.0 mm – Wall thickness approx. 0.1–1.5 mm (plastics up to approx. 2.0 mm) – Cut lengths from approx. 70 mm, with typical lengths from 200–1,200 mm – Suitable for steel pipes (e.g., E195) and various other pipe materials Machine basic data (extract from manufacturer documentation): – Pipe diameter (outside): Ø 6.0 mm to 78.0 mm – Wall thickness: 0.1–1.5 mm (plastics up to 2.0 mm) – Cut lengths: 70–700 mm in one feed cycle, longer lengths by repositioning – Minimum cut length: 70 mm – Shortest scrap length: 150 mm – Pipe input: by the meter or from coil – Cycle time for cutting only: approx. 4 s (material dependent) – Feed time for 200 mm pipe length: approx. 2 s – Feed time for 500 mm pipe length: approx. 5 s – Feed time for 1,200 mm pipe length: approx. 16 s Condition / maintenance: – Well-maintained used condition from family business – System was regularly serviced – Technical documents (offer, layout drawing, specifications) available – Photos of the complete line including magazine and deburring unit available Inspection possible by appointment. Dismantling and loading can be organized in coordination with the buyer.

Year of construction: 2008, condition: ready for operation (used), A start-hole drilling machine Madra-EDM is available. Clamping dimensions X/Y: 600mm/400mm, max. workpiece height: 300mm, travel X/Y: 500mm/400mm, travel W: 250mm, travel Z: 0.01mm-380mm, max. electrode length: 400mm, max. workpiece weight: 500kg, drilling diameter range: 0.3mm-3mm. Machine dimensions X/Y/Z: approx. 1300mm/1300mm/2000mm, weight: approx. 1000kg. The electronics of the machine are defective, as the current for the erosion process is not provided. Dokumentation vorhanden. An on-site inspection is possible. Itsdpfx Adox Dcaredjb

Condition: excellent (used), This machine was overhauled in 2025 and is therefore in like-new condition! Technical data: - Min. drilling diameter 16 mm - Max. drilling diameter 35 mm - counter boring 65 mm - Max. drilling depth 1,400 mm using BTA method - Required machine footprint approx. 6,100 x 3,100 mm - Max. machine height 2,400 mm - 2 separate drilling units, mounted on base machine bed, spindle distance 600 mm Ijdpfewq I Iqjx Addstb - Flat guideways - Feed drive via ball screw and feed gearbox - Rapid traverse speed 4,000 mm/min - Feed speed max. 230 mm/min - Drive power per drilling spindle: 11 kW (2 pieces) - Infinitely variable speed up to max. 6,000 rpm - Hydraulically attachable tailstock with counter run - Tailstock manually movable on base plate with T-slots - Enclosure with sliding doors - 1 steady rest each - 1 rotating clamping bell holder, basic holder each - 2 pre-centering devices each - Drilling depth control via cams and limit switches - CNC control SFT and FU, connection 380 V / Rated current 80 Amp. - Each unit has its own control and own feed motor With this machine you actually receive 2 single-spindle machines, as each spindle is operated separately with its own control and feed motor.

Condition: refurbished (used), 2-spindle deep hole drilling machine under reconstruction Itjdpfx Ajx E U S Eoddsb

Condition: good (used), Year of construction: 2011, machine/vehicle number: 35114, feed length X-axis: 600 mm, feed length Y-axis: 300 mm, feed length Z-axis: 600 mm, total length: 3,500 mm, total width: 1,500 mm, total height: 2,100 mm, overall weight: 2,000 kg, spindle speed (max.): 4,000 rpm, table length: 1,000 mm, table width: 680 mm, feed length W-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 124, DRILLING CAPACITY: - Twist drill diameter: max. 16 mm Itsdpfx Aewxq E Ujddsb - Single-lip drill: 4–16 mm - Thread cutting: max. M12

Year of construction: 1986, condition: used, - working length (mm): 3200 - drilling units: 3 from below with 3-spindle drilling head - Hold down: 2 from above - pressure cylinder: 1 from the side - control: Siemens of newer construction Itsde Drmxepfx Addob

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Itjdpfx Aswkba Hoddjb Equipment and technical data: - 2-jaw drill chuck for up to 20 mm shank diameter - Pneumatic position adjustment on 2 levels, 0-100 mm - Max. drilling depth 150 mm - Precision indexing rail 12 mm - Central locking and cross adjustment - 2 pneumatic safety clamping cylinders - Motor 1.5 kW - Speed 2800 rpm Dimensions (without stop): 1100 x 1100 x 1500 mm Weight: approx. 310 kg Availability: short-term Storage location: Röllbach

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Itjdpfsw I Uy Tjx Addob Availability: short-term Location: Röllbach

Year of construction: 2018, condition: as good as new (ex-display), Number of spindles 1 full drilling 5-40 mm Drilling depth 1.000 mm Iodpfx Adsd S Ualodstb