Used Drill Press for sale (16,900)

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, rotational speed (max.): 2,970 rpm, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Max. panel width: 1,000 mm Max. panel length: 2,500 mm Min. panel length: 250 mm Min. panel width: 100 mm Number of vertical lower groups: 5 Number of vertical upper groups: 1 Lateral horizontal groups: yes Number of pressure elements: 5 Number of horizontal lateral groups: 2 Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS System control: TOPDRILL Machine programming software: WOODWOP Total installed power: 35 kW Podpfxjyzy T To Anfjgk EQUIPMENT Lateral horizontal groups CNC positioning of the groups CNC positioning of the Z-axis Safety standards with CE marking Safety light barriers Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial reference documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6157

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 180253, functionality: fully functional, pressing force: 150 t, stroke length: 340 mm, table width: 1,570 mm, Equipment: CE marking, TECHNICAL DETAILS Pressing force: 150 t Pgjdpjy Avvyjfx Anfok Max. stroke: 340 mm Table width: 1,570 mm Adjustment height: 280 mm Adjustment width: 200 mm Height adjustment: 800 mm Adjustment speed: 5 mm/s Column gap (width): 1,570 mm MACHINE DETAILS Control: Conventional Dimensions & Weight Dimensions (L x W x H): 2,650 x 1,450 x 2,625 mm Transport weight: 2,500 kg Transport packages: 1 pc. EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 7376230761, functionality: fully functional, operating hours: 305 h, pressing force: 400 t, stroke length: 365 mm, throat depth: 630 mm, controller model: Durma DT-15, working width: 4,050 mm, TECHNICAL DETAILS Press force: 400 t Max. working width: 4,050 mm Upright distance: 3,400 mm Throat depth: 630 mm Max. stroke: 365 mm MACHINE DETAILS Control system: Durma DT-15 Number of axes: 4 (Y1+Y2+X+R) Crowning system: CNC-controlled Dimensions & Weight Dimensions (L x W x H): 5,750 x 2,110 x 3,640 mm Transport weight: 27,760 kg Transport packages: 1 Psdoy Avu Aopfx Anfogk Operating hours: 2,216 h Hydraulic motor hours: 305 h EQUIPMENT Tools Documentation CE marking CE certificate

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, pressing force: 150 t, stroke length: 415 mm, throat depth: 400 mm, clearance between the columns: 2,600 mm, working range: 3,100 mm, The hydraulic system has been completely overhauled; the cylinders were removed and reconditioned, and seals, oil, and filters were replaced. New light barriers were installed, the CNC control unit was tested, and the machine was repainted. TECHNICAL DETAILS Press force: 150 t Bending length: 3,100 mm Throat depth: 400 mm Distance between uprights: 2,600 mm Stroke: 415 mm Axes: Y1 - Y2 - X - R - Z1 - Z2 MACHINE DETAILS Pgodpfxsy D Ih Rj Anfjk Control unit: CYBELEC DNC 900 Motor power: 15 kW Dimensions & Weight Overall dimensions (L x W x H): 4,000 x 2,400 x 3,200 mm Machine weight: 12,800 kg EQUIPMENT Hydraulic tool clamping Hydraulic crowning

Condition: ready for operation (used), Year of construction: 1983, operating hours: 50,000 h, functionality: fully functional, operating pressure: 200 bar, overall weight: 33,000 kg, pressing force: 1,000 t, stroke length: 650 mm, travel speed (max.): 3,600 mm/min, TECHNICAL DETAILS Pressing force: 1,000 t Clamping force of the core plates: 30 t Travel speed: approx. 60 mm/s Operating pressure: 200 bar Stroke of the movable plate: 650 mm Stroke of the mold holder plate (towards operator): 980 mm Heating Plates and Heating System Heating plate size: 1,000 mm x 1,000 mm Number of heating plates: 7 Number of openings: 6 Opening dimension per opening: approx. 108 mm Specific pressure on plates: 100 kg/cm² Hydraulics and Power Units Hydraulic pump power: 9 kW Oil dynamic pump power: 11 kW Installed electrical power: 21.5 kW Hydraulic oil capacity: approx. 160 l Operating Fluids Amount of hydraulic fluid emulsified with water and 5% CIL-SOLIOIL-BK oil: approx. 1,300 l Nitrogen bottles (each 60 l at 200 atm) for accumulator pre-charging: approx. 10 MACHINE DETAILS Weights Podpfjy Hhqdex Anfsgk Weight of the press: 33 t Weight of hydraulic power unit: 0.4 t Weight of pump and accumulator: 1.9 t Weight of electrical unit: 0.2 t Total delivery weight: 35.5 t FEATURES Heating system with saturated steam Electrohydraulic power control device Electrovalve air venting system

Condition: used, Year of construction: 2008, machine/vehicle number: 10322T, functionality: fully functional, pressing force: 120 t, stroke length: 355 mm, table width: 1,560 mm, table length: 3,100 mm, total length: 4,200 mm, total width: 1,800 mm, total height: 2,080 mm, overall weight: 9,000 kg, Equipment: documentation/manual, We offer this used Interwood HOP veneer press, year of construction 2008. Podpfjy Ah T Rex Anfsgk Location: Maryport, Cumbria, UK 18000GBP (with VAT) 15000GBP exVAT Open to offers 20m cable and distribution box included in price. Type: HOP Serial number: 10322T Year of manufacture: 2008 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2002, functionality: unexamined, Edwards Pearson PR6 250/4100 press brake (2002) Pedey Duvuopfx Anfsgk

Condition: used, functionality: unexamined, Year of construction: 2005, Edward Pearson / Bystronic PR 100x3100 press brake (2005) Pedpfxjy Duvhs Anfogk

Condition: used, functionality: fully functional, Year of construction: 2008, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 6 metres x 1 metres Capacity. Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. Pgedpfx Ansy E N Hdofok 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Hypertherm Plasma. Kemper Extraction Unit

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 40 t, table length: 1,030 mm, Equipment: CE marking, documentation/manual, safety light barrier, Used Bystronic Xpert 40ton x 1metre cnc pressbrake for sale Make: Bystronic Model: Xpert 40/1030 Tonnage 400 kn / 40ton Back gauge: 6axis back gauge Bending length 1030 mm / 1metre Y-approach speed (up to) 300 mm/s Y-working speed (up to) 25 mm/s Accuracy Y-axis 0.004 mm Oil capacity 100 l Electric supply 7.5 kw Weight 4t Pgedpoy D Smwjfx Anfek Length, approx. [L] 1520 mm Width, approx. [W] 1584 mm Height, approx. [H] 2449 mm Xpert 40/1030 ByVision Bending control with 22 Inch Full HD display and touch technology

Condition: ready for operation (used), functionality: fully functional, -----Konica Minolta Press C 1060 with 1.3 million prints----- Tested and ready to operate! Equipment: - fiery ic308 + faci bundle - RU 509 Pgedpfswx Ey Tsx Anfjk - PF 707 VACUUM PAPER FEEDER OPTION - DF - FS 532 - Video of the machine in operation available upon request As an experienced reseller of used copiers, we have developed real expertise in packaging and pallet shipping, ensuring that our customers receive machines in perfect condition. We ship copiers sourced from and serviced by Konica Minolta France. If you have any questions, please don't hesitate to ask. Our company offers the widest range of Konica Minolta production copiers and arranges worldwide deliveries upon request. Feel free to contact us for further information.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Psdpfx Aou Thhrsnfsgk Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Pgsdpsx A U Ncsfx Anfsk Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: ready for operation (used), functionality: fully functional, drilling capacity: 22 mm, throat depth: 370 mm, table length: 1,800 mm, drilling depth: 120 mm, rotational speed (max.): 3,600 rpm, TECHNICAL DETAILS Pgodpfx Anjy Hg E Tofsk Drilling depth: 120 mm Drilling capacity: 22 mm Throat depth: 370 mm Number of drilling units: 4 Power: 4.4 kW Table type: Fixed table Table dimensions: 1,800 x 500 mm Main spindle power: 1.0 kW Spindle speed range: 345 - 3,600 rpm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,900 x 1,000 x 1,900 mm Net weight: 1,500 kg Transport packages: 1 EQUIPMENT Documentation Conventional control

Condition: good (used), Year of construction: 2008, Fully equipped used 3-meter press brake Type: E Brake 150 3100 Capacity: 3100 x 150 tons Pgjdpfjy Ey Raex Anfok E Controll (new CNC, original Safan!) 8-axis control (Y1, Y2, X1, X2, R1, R2, Z1, and Z2) Hydraulic upper and lower clamping Year of manufacture: 2008 Prepared for bending aid 1 set of tools included.

Condition: good (used), Bending tool, die, upper knife, upper tool, straight tool Pgedod S D Dnjpfx Anfjk -Tool for: press brake -Dimensions: 20 x 70 mm -Length: 3020 mm -Weight: 22 kg

Condition: used, Year of construction: 2000, total length: 1,000 mm, total width: 1,900 mm, total height: 2,000 mm, Empty weight: 3.000 kg - Year: 2000 - Documentation available: No Pgjdpfx Ajy Ew Eusnfok - CE marking present: Yes - CE certificate present: No - Serial number: 205570 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 160 - Max. stroke [mm]: 100 - Table length [mm]: 420 - Table width [mm]: 410 - Table bore diameter [mm]: 60 - Ram length [mm]: 120 - Ram width [mm]: 120 - Transport dimensions: 1000mm x 1900mm x 2000mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Amada Apelio II 305072 – CNC Turret Punch Press Podpfxoyz T Dls Anfjgk Amada Apelio II 305072 CNC Turret Punch Press | 30T | 1270×3660mm | 58 Station Amada Apelio II 305072 CNC Turret Punch Press in excellent working condition. A proven, high-capacity sheet metal machine ideal for production environments and precision punching jobs. 🔧 Key Specifications: Punching force: 30 Ton Max sheet size: 1270 × 3660 mm (with repositioning) Table size: 1270 × 1830 mm Turret: 58 station (incl. auto-index stations) Max sheet thickness: ~6 mm (mild steel) Control: AMADA / FANUC (model dependent) High-speed stroke rate for efficient production ⚙️ Features: CNC controlled for precision and repeatability Thick turret tooling system Suitable for a wide range of sheet metal applications Reliable AMADA build quality 🏭 Applications: Sheet metal fabrication Enclosures, panels, brackets General engineering production

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, Joos vacuum table with silicone membrane Versatile press suitable for veneering, coating, form gluing, 3D veneering, and edge banding, among other applications. With certain limitations, this press can serve as an alternative to a hydraulic veneer press. Features a new, heat-resistant silicone membrane—extremely stretchable and easy to clean. Also suitable for thermoforming preheated thermoplastic materials such as acrylic glass or solid surface materials. Internal frame dimensions approx. 2900 x 1410 mm, usable area approx. 2800 x 1300 mm. Working height approx. 900 mm. Equipped with a Becker VT4.40 vacuum pump, 400V, 1.5 kW with 40 m³/h output, and two 200-liter vacuum tanks for convenient operation and rapid evacuation. Electronic vacuum pressure switch automatically stops the pump once the preset vacuum is reached, preventing continuous operation. Mobile on four lockable swivel casters. Frame can be easily lifted and secured with two catches. Double-frame design allows for fast membrane exchange. Currently fitted with a new silicone membrane. The grooved base plate ensures rapid vacuum distribution. CE marking. Original paintwork, with touch-ups in some areas. The silicone membrane and base plate have been replaced – the machine is immediately ready for use. Pedpfx Anjy Hl Hpsfogk Dimensions approx. 3100 x 1550 x 1020 mm (LxWxH). Weight approx. 550 kg. The machine can be demonstrated by appointment at our premises. We only offer machines that are ready for demonstration in our warehouse – see “More offers from this seller.”

Condition: used, Year of construction: 2001, Amada HFE 80-25 SL Hydraulic Press Brake. S/No. VO11137 (2001), Remanufactured JTES 2018 Location: These lots are located in Yeovil, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Pgjdpfx Anjy D Rhysfok

Condition: used, Year of construction: 2022, Bystronic Xpress 80/2100 Hydraulic Press Brake. S/No. Xpress 22334EU (10/2022), Max Press Force 800KN, Max Working Length 2100mm, Max Stroke 200mm, Machine Weight 6000kg Pgsdpfxey D Rbaj Anfsk Location: These lots are located in Yeovil, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2022, Bystronic XACT Smart 160/3100 Hydraulic Press Brake. S/No. XACT 22040SE (02/2022), Max Press Force 1600KN, Max Working Length 3100mm, Max Stroke 200mm, Rapid Approach, 140mm/s, Working Speed 1 - 10mm/s, Return Speed 115mm/s, Machine Weight 10,500kg Pgsdpfx Ansy D N R Hjfjk Location: These lots are located in Yeovil, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2021, Bystronic Xact Smart 225/4100 Hydraulic Press Brake. S/No. XACT21278SE (08/2021), Max Press Force 2250KN, Max Working Length 4100mm, Max Stroke 200mm, Rapid Approach 140mm/s, Working Speed 1 - 10mm/s, Return Speed 115mm/s, Machine Weight 15,000kg Pedpfx Asy D N Rasnfegk Location: These lots are located in Yeovil, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), Capacity up to 40 mm Mount: Mk-4 Left/right rotation Variable speed with variator drive Pgodpfx Asy Ht H Ronfok

Condition: excellent (used), ERLO TCA 32 column drilling machine with automatic feed. Capacity: 32 mm Spindle taper: MK-4 Speed: 8 steps, between 93 and 1420 rpm Pgjdpfxjy Hridj Anfek Feed: 0.10 - 0.18 - 0.24 mm/rev Machine equipped with a cross table.