Used Drilling Machinery for sale (74,326)

Condition: excellent (used), Year of construction: 1999, control type: NC control, controller manufacturer: UNIOP, working width: 2,520 mm, HM bending machine Model KSM 5 / 2500 Year : 1999 Gisdpoyx Epbsfx Achsw Capacity : 2520 x 5 mm. INIOP NC control (Swiss made) Manual back gauge

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3200 U/min thread M16 ST60 column diameter 98 mm engine output 1,1 kW dimensions 800 x 500 x 2000 mm weight 210 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed Gijdpjprfbusfx Achew - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 460 x 460 mm turning speeds 75 - 3200 U/min engine output 1,5 kW column diameter 125 mm thread M16 ST60 feed 0,10/0,18/0,26 mm/U dimensions 800 x 500 x 2200 mm weight 350 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights Gijdekahu Rspfx Achsw - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3000 U/min engine output 1,1 kW column diameter 98 mm thread M16 ST60 dimensions 700 x 450 x 1500 mm Godpfx Aekahu Ujchjiw weight 200 kg - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, Year of construction: 2026, pressing force: 25 t, Equipment: double-sided, The Marinus Powermax Finger Jointer Line profiles horizontally, applies adhesive, cuts out defects, presses and cuts to length. The unique process creates a clean joint that does not require post-processing. About the Finger Jointer When feeding wood into the machine, it is possible to mark defects, such as knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. For instance, to get cladding or paneling without knots or holes. Before the profiling and also before the pressing, the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. This results in a highly accurate connection of the finger joint, with a flat surface at the joint and a straight end-product. Because of this precision (for most purposes) the wood does not need to be planed or sanded afterwards. The adhesive applicator is mounted to the carriage with the profile cutters. In the returning stroke of the profiling carriage the adhesive is applied. The use of PU adhesive ensures a very strong bond, suitable for outdoor use and in wet environments. While most other finger jointers move the wood transversely (right-angled) past the profiling heads, the Marinus Finger Jointer moves the wood longitudinally (lengthwise) through the machine. This enables feeding in long lengths of 6 meters or even longer. As a result, the machine can process all the wood, including longer lengths, and use it all (except for the defects) for the jointed end-product. This way, there is no good wood turned into short pieces of scrap. Where other finger jointers focus on re-using short pieces of scrap wood, the Marinus eliminates the production of scrap wood. The Marinus Finger Jointer contributes to an efficient and sustainable production process. Specifications: Infeed Lenghts: 450 - 6000+ mm Infeed Widths: 50 - 300 mm Infeed Thicknesses: 8 - 50 mm Length modes: Variable / Fixed Capacity: Up to 8 joints/min This machinery is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machinery is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery. Gedpjp R Iwhofx Acheiw

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 200 mm, The Marinus Powermax Chevron is an advanced machine line for head-end machining tongue and groove on Hungarian-point (Chevron) and herringbone parquet. Giodpfxjiv R Hho Achow Several wooden parquet boards can be loaded into the infeed cassette, after which the process runs automatically. First the boards are pre-cut to the corresponding length and angle in the cross cut saw unit, then they go via conveyor to the Chevron machine. Before the profiling takes place the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. Resulting in high profile accuracy with no noticeable edge on the top side when the boards are fitted together. The two arms on which the profiling heads slide back and forth are sturdy built and driven by servo motors, which guarantees that all the boards have exactly the same length and angle. The lengths and angles are stepless adjustable via the user friendly touch screen panel. This clamping system combined with two pre-cut aluminium backing blocks effectively prevents blow-outs and splintering. Lengths: 350 - 1200 mm Widths: 50 - 200 mm Thicknesses: 8 - 22 mm Angle: -45° to +45° Capacity: Up to 10 boards per minute Length modes: Fixed lengths This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: new, Year of construction: 2026, The Marinus Powermax Endmatcher is designed for head-end machining tongue and groove on parquet floorboards, decking and cladding, producing fixed and variable lengths. It can be used for any type of wood; hardwood, softwood, or engineered wood. The machine can cut to length, cut out defects, and do head-end profiling, all in a single pass of the wood through the machine. When feeding wood into the machine, it is possible to mark defects, like knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. Lengths: 450 - 6000+ mm Widths: 50 - 300 mm (optional width of 400mm or 500mm) Thicknesses: 8 - 45 mm Capacity: up to 20 pc/min Length modes: Variable / Fixed / Round. Giodpsf Hkgpofx Achew This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, total length: 3,000 mm, total width: 1,500 mm, laser power: 1,500 W, Equipment: documentation/manual, WatMachinery OT3015F is a modern fiber laser cutting machine with a 1500 × 3000 mm working area, equipped with high-quality industrial components and an automatic Raytools BS03K cutting head. The machine is designed for precise and efficient cutting of carbon steel, stainless steel, aluminum, and brass. (Photo only for REF.) Available laser source powers: 1500 W / 2000 W / 3000 W (Raycus). Key Advantages - Heavy-duty construction – high rigidity, stability, and vibration resistance - 4th generation aerospace-grade aluminum gantry – low weight, rapid acceleration, and high motion accuracy - Raytools BS03K cutting head – automatic focusing, optics protection, high cutting speed - Raycus laser source – reliability, long service life, and high energy efficiency - Raytools XC3000S control system – intuitive operation, file editing, remote control capability - INOVANCE servo drives – high precision, fast dynamic response, stable operation Rebi N Auewiwtyofcen - Precision drive system – LEITESEN racks (dual drive) + PEK Italia linear guides - SMC pneumatic system (Japan) – reliability and longevity - Schneider (France) electrical components – high safety standards - S&A industrial chiller – dual-circuit cooling, alarms and machine protection - Fume extraction system – efficient smoke removal and improved working conditions Gjdpfx Acewiwtyjhsiw - Complete industrial configuration – machine ready for operation immediately after installation Technical Specifications Model: OT3015F Working area: 3000 × 1500 mm Laser source: Raycus Fiber (1500–3000 W) Wavelength: 1070–1080 nm Interfaces: USB, RJ45 X Axis - Max speed: 80 m/min - Travel: 3000 mm - Positioning accuracy: ±0.05 mm/m - Repeatability: ±0.05 mm Y Axis - Max speed: 80 m/min - Travel: 1500 mm - Positioning accuracy: ±0.05 mm/m - Repeatability: ±0.05 mm Z Axis - Travel: 100 mm Additional Parameters - Maximum acceleration: 0.8 G - Power supply: 380 V / 50 Hz - Operating mode: 24/7 continuous operation - Machine weight: approx. 1500 kg - Dimensions: 4500 × 2300 × 1500 mm Applications: ✅ Kitchen equipment industry ✅ Bathroom equipment industry ✅ Automotive ✅ Advertising and metalworking Why choose us? JET STAR INTERNATIONAL offers comprehensive solutions for laser cutting machinery, providing service, training, and spare parts availability throughout Europe. Our machines combine quality with affordability, delivering an excellent cost-to-performance ratio. 🗂️ Available to order 📞 Contact us for individual offers and delivery terms! 🌍 Support available in Polish, English, and German.

Condition: like new (used), Year of construction: 2023, operating hours: 30 h, functionality: fully functional, machine/vehicle number: JSUP-1703, PAPER STRAW PRODUCTION LINES FOR BEVERAGE CARTONS (U-SHAPE & I-SHAPE) Location: Poland (European Union) Manufacturer: Zhejiang Jinshen Machinery Manufacture Co., Ltd. Year of Manufacture: 2023 Condition: Excellent – Installed, commissioned, tested and fully operational Availability: Immediate Complete Turnkey Production Solution for Beverage Carton Paper Straws Unique opportunity to acquire two nearly new production lines for paper straws used in aseptic beverage cartons (milk, juice and beverage packaging). The equipment was professionally installed and successfully commissioned in Poland. All machines are fully functional and available for immediate inspection. Line 1 – U-Shape Paper Straw Production Line Complete automatic production line including: Paper straw making machine JS-PT22-2010F Flexible straw forming machine JSFP-2021-30 U-shape automatic packing machine JSUP-1703 Microwave dryer 2 × circulation heaters Carton filling machine Conveyor assembly line Vision inspection system Capacity: up to 600–800 pcs/min Suitable for beverage carton applications requiring individually packed U-shaped paper straws. Line 2 – I-Shape Paper Straw Production Line Complete automatic production line including: Paper straw making machine JS-PT22-2010F Microwave dryer Vision inspection system I-shape straw packing machine 2 × carton filling machines Capacity: up to 800–900 pcs/min Gisdpszb Uwlsfx Achsw Designed for straight paper straws used in beverage carton packaging systems. Advantages ✅ Machines located in the European Union ✅ No waiting time for production in China ✅ No import duties or overseas shipping delays ✅ Installed and successfully tested ✅ Immediate availability ✅ Modern Delta PLC control systems ✅ Vision inspection systems included ✅ Suitable for food-grade production Technical Highlights Straw diameter: 3.0 – 8.0 mm Production speed: up to 100 m/min PLC control: Delta HMI touch screens Ethernet communication Automatic counting and monitoring Food-grade manufacturing standard Remote maintenance capability Ideal For Paper straw manufacturers Beverage packaging suppliers Dairy packaging producers Contract packaging companies Investors entering sustainable packaging markets Sale Options Complete package (both lines) U-shape line separately I-shape line separately Inspection The equipment can be inspected under power at our facility in Poland. Additional photos, videos, technical documentation and machine specifications are available upon request. Contact METALTON Sp. z o.o. Poland For detailed information, pricing and viewing appointments, please contact us directly. Keywords: Paper Straw Machine, U Shape Straw Machine, I Shape Straw Machine, Tetra Pak Straw Production Line, Beverage Carton Straw Line, Paper Straw Packaging Machine, Sustainable Packaging Equipment, Straw Manufacturing Line, Beverage Packaging Machinery.

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: M06L/8498, Offer Number: M06L/8498 Machinetype: double blow header Info: bushing cut-off Godswi Sxqopfx Achjiw Make: NATIONAL Type: M34 S1 Constr. year: 1979 diameter range: 1-4mm shaft length under head: 25 mm max. cutting length: 32 mm output- piece/min: 350 Location: In our warehouse

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: M20L/8619, Offer Number: M20L/8619 Machinetype: rivet header Info: semi tubular rivets Make: NATIONAL Gijdowi Sbrepfx Achsw Type: 51 Constr. year: 1980 diameter range: 5 mm shaft length under head: 40 mm max. cut-off length: 60 mm output pieces/min: 470 Location: In our warehouse

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: M06L/8497, Offer Number: M06L/8497 Machinetype: double blow header Info: bushing cut-off Make: NATIONAL Type: M34 S1 Constr. year: 1977 diameter range: 1-4mm Giodpfswi Szfex Achew shaft length under head: 25 mm max. cutting length: 32 mm output- piece/min: 350 Location: In our warehouse

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Gedoq E Ti Hepfx Achoiw Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. If you want to try it, please bring cable.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, SHUZ TUNG CNC38BR2 CNC Tube Bending Machine Manufacturer: SHUZ TUNG Machinery Industrial Co., Ltd. (Taiwan) Model: CNC38BR2 Year of manufacture: 2018 Technical Data: * Maximum tube capacity: 38 x 2 mm * Power: 22 HP * Power supply: 400 V * Machine weight: 2,500 kg Description: SHUZ TUNG CNC38BR2 CNC tube bending machine in very good technical and visual condition. The machine is equipped with a CNC control system and is offered with a large tooling package included in the sale. Suitable for bending steel, stainless steel, aluminium and other metal tubes. The machine features a fully enclosed safety guarding system and automatic tube feeding. Ideal for automotive, furniture, handrail, exhaust and industrial tube production. Included Tooling: * Ø8 mm – R17.5 * Ø10 mm – R15 * Ø10 mm – R28 * Ø12 mm – R26 * Ø12 mm – R50 * Ø14 mm – R30 * Ø16 mm – R25 * Ø16 mm – R38 * Ø16 mm – R50 * Ø16 mm – R60 * Ø22 mm – R32 * Ø22 mm – R50 * Ø24/25 mm – R48 * Ø25 mm – R45 * Ø25 mm – R60 * Ø28 mm – R100 * Ø30 mm – R63 * Ø35 mm – R63 * Ø35 mm – R70 Machine can be inspected on site. Loading assistance available. Location: Poland. Gisdpfeza Sw Hex Achsw Additional photos and videos available upon request.

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: N32469, National double printing press M68, used, year 1974, Gisdjwiuy Rspfx Achsw

Condition: new, Year of construction: 2023, operating hours: 687 h, functionality: fully functional, machine/vehicle number: 9353740, turning diameter over cross slide: 318 mm, turning length: 470 mm, turning diameter: 260 mm, spindle bore: 52 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 600 mm, spindle motor power: 15 W, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, total height: 1,900 mm, total length: 2,900 mm, total width: 1,600 mm, feed length X-axis: 220 mm, feed length Z-axis: 600 mm, quill diameter: 52 mm, overall weight: 3,600 kg, bar passage: 52 mm, Equipment: documentation/manual, For sale: High-precision CNC lathe Accuway Machinery UT200-M, equipped with Live Tools and C axis, ideal for demanding and high-speed machining. Key features: - Model: UT200-M - Manufacturer: Accuway Machinery (Taiwan) - Year of manufacture: 2023 - Control unit: Fanuc Series 0i-TF Plus - Built-in manual guide for easier programming and simulation Gijdpeytpbpofx Achew Machine specifications: - Maximum turning diameter: 260 mm - Maximum turning length: 470 mm - Workpiece diameter over bed: 505 mm - Workpiece diameter over carriage: 318 mm - Number of tool positions in turret: 12 - Spindle speed range: 6000 / 4500 / 4000 / 3500 rpm - Tailstock diameter: 75 mm - Tailstock taper: MT#4 Dimensions and weight: - Length: 2.9 m - Width: 1.6 m - Height: 1.9 m - Weight: 3,600 kg Included accessories: - 8 tool holders (5 for external turning, 3 for internal turning) - Chip conveyor - Chip collection cart - Signal tower (red/yellow/green lights) – real-time machine status - Manual guide – for easy manual programming and path verification The machine was bought new in August 2024, has seen very minimal use compared to its full potential, and is immediately ready for operation. For any further information regarding condition, price negotiations, technical details or to arrange a viewing, feel free to contact me via message or phone.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 230 h, SANY SY155W is a wheeled excavator / mobile dozer designed for construction, infrastructure and utility works. It is not typically just a demolition machine, but a versatile field and urban machine that is suitable for various work tasks when equipped with appropriate adapters (e.g. hydraulic breaker, crusher). Power source: Stage V DEUTZ TCD4.1 / Isuzu diesel engine, with approx. 115-120kW power. Giedpfx Acjy It Tmjhsw Fuel and hydraulic system for efficient work and economical operation. Total operating weight approx. 13.5-15t. Standard bucket volume: ~0.6m³. Wheeled design — easy transportation and quick relocation between sites. Hydraulics and work tasks Quick-connect hydraulic system that allows the use of various adapters such as hydraulic breakers, breakers, graders or other tools. Powerful digging and lifting function – suitable for digging, loading, breaking and demolition with the right work tool.

Condition: good (used), Year of construction: 2015, web offset-flexo printing machine register BST camera control system unwinder semi rotary uv flexo chamber no.1 semi rotary uv flexo chamber no.2 semi rotary uv offset no.1 semi rotary uv offset no.2 cold embossing unit for offset semi rotary uv offset no.3 semi rotary uv offset no.4 semi rotary uv offset no.5 semi rotary uv offset no.6 semi rotary uv flexo chamber varnishing no.3 semi rotary die-cutting rewinder Godpewgittjfx Achjiw max speed 50 - 180 m/min color range 4 - 10 colors max print length 350 mm max paper width 320 mm max print width 300 mm max unwinding diameter 700 mm max rewinding diameter 600 mm machine including process-free CTP Agfa PT - R4300S

Year of construction: 2009, condition: used, Two-color rotary flexographic printing press with integrated slotter and stacker. TECHNICAL DATA: Year of manufacture: 2009 Serial number: 0904K02 Max. speed: 70 sheets/min Economic speed: 50 sheets/min Max. sheet size: 3000 x 2000 mm Min. sheet size: 600 x 350 mm Max. print area: 2900 x 1900 mm Board thickness: 2-10 mm Plate thickness: 4-7 mm Axial adjustment: ± 8 mm Gijdpehbvq Hofx Achjw Max. slot length: 350 mm Slot width: 7 mm Main motor: 7.5 kW Total power: 15 kW Dimensions: 6000 mm x 3050 mm x 1900 mm Weight: 28000 kg DESCRIPTION: The price includes commissioning, technology transfer, training, and start-up warranty.

Condition: good (used), Year of construction: 1981, functionality: fully functional, SINGLE-DIE TUBULAR RIVET HEADER NATIONAL M5 Rebuilt on 2024. New electrical system. Operational, working. Available for any test. Number of die: 1 Gisdpotxni Njfx Achew Number of pieces per min.: 300 Length Rivet: 20 mm. Depth of Pierce (max.): 5 mm. Cutoff diameter: 5 mm. Floor space (width): 1.300 mm. Floor space (length): 2.690 mm. Power of main motor: 7.5 KW Net weight: 3.100 kg. Gross weight: 3.700 kg.

Condition: like new (used), Year of construction: 2022, functionality: unexamined, machine/vehicle number: YF-240, type of input current: AC, Equipment: documentation/manual, In 2022 we purchased a new line, but the business direction changed and the line was never unpacked from the containers. The line is stored in 40HQ*3pcs container and in one 20GP container. Production capacity:220-300kg/hour WPC production line is applied to produce wood plastic composite products, like WPC decking, WPC door frames, WPC skirting and so on. by changing screw barrel and molds, it can produce both PE PP type WPC products and PVC type WPC products. Gjdpfxsxb R Aij Achjiw features of wpc production line: - adopts double step production, first compounding & granulating, then extrusion - adopts bimetallic screw barrel, high hardness, more wearable - adopts parallel twin screw extruder for compounding & pelletizing, good exhausting effect, better plasticizing effect Please view all the technical specification in attachments.

Condition: ready for operation (used), Year of construction: 1992, A semi-automatic tube filling and sealing machine Norden Machinery with chute and vacuum tipper is available. Filling volume range: 1ml-300ml, container volume: 90l, filling capacity: approx. 140tubes/min, machine dimensions X/Y/Z: approx. 2500mm/1400mm/2400mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible. Gjdpfxoxn Aags Acheiw

Year of construction: 2011, condition: ready for operation (used), X-axis: 300mm, y-axis: 620mm, z-axis: 400mm, positioning accuracy: ±0.005 inch, repetition accuracy: 0.005 inch, rapid traverse: 25m/min, feed rate: 10m/min, air pressure: 6kg/cm², air consumption: 400l, pump motor: 30W, delivery rate: 2.2cm³/s, pump pressure: 8kg/cm², tank capacity: 2l, pump electrics: 220V/ 3PH/ 1.2A, max. delivery rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 3000mm, width: 2050mm, height: 3020mm, weight: 3020kg. max. flow rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 2984mm, width: 2050mm, height: 2420mm, weight: 3020kg. Operating hours control: 22,261h, machine: 22,414h, programme: 10,507h, spindle: 7695h. Fully functional, spindle was recently replaced, the built-in oil skimmer in the cooling water tank is not functional. With documentation. On-site inspection is possible. Giedpfxowc A Rkj Achsw

Year of construction: 2026, condition: new, functionality: fully functional, power: 300 kW (407.89 HP), load capacity: 2,000 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² Gsdpfx Ajyy Rk Techeiw • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Year of construction: 2026, condition: new, functionality: fully functional, power: 80 kW (108.77 HP), load capacity: 400 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Giodpsyy Ricjfx Achsw Mizar Recycling Machinery