Used Drilling Machines for sale (66,114)

Condition: ready for operation (used), functionality: fully functional, drilling capacity: 40 mm, spindle nose: MK-4, rotational speed (max.): 1,540 rpm, rotational speed (min.): 90 rpm, Heavy-duty column drilling machine with belt drive and 3-speed automatic spindle feed (0.05/0.1/0.2 mm/rev). Also equipped with a manually operated cross table measuring 605 x 252 mm. Isdpjyzb Rmofx Apnoib

Condition: new, bore capacity in steel St 60 30 mm bore capacity in cast iron GG 20 30 mm Drilling capacity in St 60 30 mm threading in St 60 M 16 threading in GG 20 M 20 Short spindle MK 3 spindle stroke 140 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm Iisdpfx Asyvvn Nopnjb T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 132 / 724 mm feed von Hand spindle turning speed - stepless 100 - 1.800 U/min total power requirement 1,0/1,6 kW weight of the machine ca. 260 kg

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment Especially designed for stair construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drillings, such as for balusters, can be easily accomplished with the swiveling drilling unit. Motor with pole switching, two speeds Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm Motor start via convenient handle switch Equipped with Röhm two-jaw chuck, 1 - 20 mm Linear laser for precise workpiece positioning Drilling unit can swivel 65 degrees left and right Pneumatic adjustment of working height allows dowelling on two levels without repositioning. Desired drilling heights can be set for each drilling level via digital counter, switching between levels is pneumatic and operated from the front Cross adjustment 340 mm, infinitely variable or in 12 mm increments via indexing rail Pneumatic clamping possible at any point, operated from the front Maximum height adjustment approx. 100 mm above table height Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, 1 clamping column repositionable to the front 2 swiveling workpiece supports Extraction funnel Central stop + 1 side stop Fixed mitre stop Length stop as round rod Assorted drill bits Operating manual CE mark Machine was partly repainted due to paint splashes. Pneumatic hoses replaced Dimensions: approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. Isdpfx Asxmatnspnoib The machine can be viewed and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: used, functionality: fully functional, spindle mount: MK 2, quill stroke: 120 mm, Gillardon column drilling machine, drill press In good used condition. Manufacturer: Maschinenfabrik Wilhelm Gillardon II Bretten i. Baden According to the information on the attached label, the drilling machine is powered by a motor from VEM Elektromotorenwerke Thurm. Electric motor: Three-phase asynchronous motor, type KPER 80 K 4. VEM Motors Thurm GmbH D Zwickau 3 speed ranges via belt drive. Quill stroke approx. 120 mm, drilling spindle with Morse taper 2. Weight approx. 150 kg / approx. 1380 rpm MK2 drilling column Power consumption 0.75 kW – mains connection 380 V, 50 Hz. Inspection under power possible by prior appointment. Price €390 net ex location, plus packaging costs. All technical details are subject to possible typographical errors/mistakes. Iedpfjh N Svljx Apnoib Sale exclusively within EU countries.

Condition: excellent (used), Column Drilling Machine Manufacturer: WEBO Model: V 5 Morse taper: MK 3 Clamping table: 470 x 380 mm Max. installation dimension, table to spindle: 900 mm Throat depth: 300 mm Infinitely variable speed, min. 125 max. 1080 rpm 3 automatic feeds: 0.1 - 0.2 - 0.3 mm/rev Quill stroke: 170 mm 380 Volt 1.5 kW 3.5 A Accessories: Drill chuck 3-16 mm Coolant system The machine is in very good condition Ijdpfx Apsywhu Densib Transport dimensions: Length 900 mm Width 700 mm Height 2260 mm Weight 630 kg

Condition: excellent (used), Year of construction: 1983, bore capacity in steel (diameter) 32 mm arm length 636 mm workpiece height max. 720 mm spindle turning speed range 38 - 2000 U/min threading 38 - 643 stroke 450 mm Iijdjwvl Irspfx Apnjb spindle stroke - max. 170 mm total power requirement 6 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,5 x 1,5 x 2,2 m Left / right rotation.

Condition: as good as new (ex-display), 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. Iodpsd Supgefx Apnsib SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # distance between drilling spindles 32 mm working width 640 mm max drilling depth 65 mm no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle suction DM 80 mm machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg

Condition: used, Year of construction: 1985, machine/vehicle number: 5801, Plate drilling and burning machine FDB 600, The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Iisdoibq Itspfx Apnsb Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Condition: ready for operation (used), Radial Drilling Machine, Kovosvit VO 50, Used Machine Manufacturer: Kovosvit (Czech Republic) Model: VO 50 Arm length (throat depth): 1250 mm Drilling capacity in steel: max. 50 mm Drilling capacity in cast iron: max. 60 mm Spindle stroke: 310 mm Spindle taper: Morse taper MK-5 Speed range: 28–2500 RPM Feed range: 0.05–2 mm/rev Motor power: 4 kW Installed power: 6 kVA Machine dimensions (LxWxH): 3120 x 1030 x 2750 mm Weight: approx. 4200 kg Iijdsw Hanhepfx Apneb

Condition: ready for operation (used), Radial Drill, Used Equipment Brand: CSEPEL Model: R.F. 2a Description: Column Diameter: 350 mm Vertical Travel of the Arm: 1200 mm Horizontal Travel of the Drill Head: 1000 mm Vertical Travel of the Spindle: 400 mm Iedjw Db Nuspfx Apnsib Spindle Diameter: 65 mm 12 Spindle Speeds: 47.5 – 2100 RPM 8 Feed Rates: 0.048 – 1.2 m/min Motor Power: 9 HP

Condition: ready for operation (used), Tool grinder, tool sharpener, drill sharpener, Schanbacher S3-50 Manufacturer: Schanbacher Type: S3-50 Ijdpfox Dbltjx Apnsib Year: 2012 Dimensions: 460 × 600 × 1260 mm Drill diameter: 3–50 mm; Point angle: 90°–140° Includes: Protective cover, dust extraction system

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 35 mm throat 320 mm bore stroke 150 mm spindle taper MT 4 table-size 500 x 400 mm spindle turning speed range 75 - 3.010 U/min Iodpfx Apewlvlaenjib feed range - boring 0,1 / 0,15 / 0,22 / 0,33 mm/U quill stroke 150 mm voltage 400 V total power requirement 1,8 kW weight of the machine ca. 275 kg dimensions of the machine ca. 0,70 x 1,00 x 1,95 m - Serial-No.: 138050673 - Electromagnetic feed - Threading device - Machine vice 150 mm - Two clamping screws 14 mm - 9-piece drill cartridge 14.5 mm - 30 mm, MK 2 / MK 3 - Cutting oil spray

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 32 mm throat 245 mm bore stroke 135 mm spindle taper MT 3 table-size 410 x 380 mm spindle turning speed range 10 - 2.100 U/min voltage 400 V total power requirement 1,1 kW weight of the machine ca. 210 kg dimensions of the machine ca. 0,7 x 1,8 x 1,75 m - Threading device - Machine vice 150 mm - Drill cassette 9-piece Ijdpfx Aowlvk Njpneib 14.5 mm - 30 mm, MK 2 / MK 3 - Cutting oil spray

Condition: used, Year of construction: 1997, bore capacity in steel (diameter) 40 mm arm length 1.000 mm Isdpjl Ha Twsfx Apneib workpiece height max. 1.250 mm table-size 1.150 x 690 mm spindle taper MT 4 spindle turning speed range 40 - 1.400 U/min feed range 0,08 - 0,40 mm/min crossrail adjustment horizontal 800 mm crossrail adjustment vertical 700 mm spindle stroke 220 mm power requirement 3,5 kW voltage 380 V total power requirement 4,0 kW weight of the machine ca. 1,6 t - Serial-No.: A01/446/97 - adjustable cube table 600 x 500 x 500 mm - coolant device - machine light

Condition: used, Year of construction: 1989, bore capacity in steel (diameter) 32 mm arm length 1230 mm table surface area 1200 x 500 mm bore stroke 180 mm feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds 60 - 1800 U/min taper MK 4 total power requirement 2,7 kW weight of the machine ca. 1,8 t Iodoy Aa H Njpfx Apnsib dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device

Condition: used, MULTI-SPINDLE DRILLING MACHINE Felder 921 21 spindles, left/right rotation of spindles, quick-release spindle holders, spindle spacing 32mm, Iijdpfx Aey N Syhjpnjb drilling vertically or horizontally, 2 pneumatic clamps, power supply 380V, The machine is fully functional and ready for operation.

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: - 2-jaw drill chuck for up to 20 mm shank diameter - Pneumatic position adjustment on 2 levels, 0-100 mm - Max. drilling depth 150 mm - Precision indexing rail 12 mm - Central locking and cross adjustment - 2 pneumatic safety clamping cylinders - Motor 1.5 kW - Speed 2800 rpm Dimensions (without stop): 1100 x 1100 x 1500 mm Weight: approx. 310 kg Iodpfxswkba Hs Apneib Availability: short-term Storage location: Röllbach

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: Ijdpfx Apew I Uy Tjnjib 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Availability: short-term Location: Röllbach

Condition: used, Comec 3-spindle vertical drilling machine Iiedpfx Apoy S Adijnjb Maximum piece length 100 cm

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 4,500 rpm, controller model: Heidenhain TNC 310, TECHNICAL DETAILS X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Tool holder: SK 40 Spindle speeds: 20-4500 rpm MACHINE DETAILS Control: Heidenhain TNC 310 Dimensions & Weight Space requirements: approx. 2.15 x 2.00 x 2.50 m Isdpfxoywgtxe Apnsib Machine weight: approx. 3 t EQUIPMENT Swivelling rotary table Documentation

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 15095.86 € 289.84 € 30 mm MK 3 300 mm 0 - 4000 U/min 3 kW M30x3,5 900 mm 610 mm 1980 mm 385 kg 0,10 / 0,16 / 0,25 mm/U Isdpfoynnczex Apneib 125 mm 150 - 700 mm 590 x 450 mm 125 mm Drilling capacity / normal drilling capacity 30/35 (in E335/ST60) Main switch Dispositif de taraudage Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob Emergency stop button Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation Mechanical feed of the Z-axis incl. electromagnetic clutch for (3) feed rates Drilling cross with pushbutton (on/off) for feed rate In tapping mode: Right-left lifting via drill cross switch or optional foot switch OPTIONS: Drill package 5 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, Year of construction: 2025, neu 2025 030161 prompt, Zwischenverkauf v Deutschland 7350.17 € 141.86 € 1 23 mm Iijdoxcg Ecepfx Apnjb MK 2 260 mm 20 - 2000 U/min 1.5 kW M16x1 430 mm 715 mm 1800 mm 290 kg manuell mm/U 110 mm 230 - 850 mm 420 x 340 mm 100 mm Drilling capacity / normal drilling capacity 23/25 (in E335/ST60) Manual feed Main switch Tapping attachement Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug OPTIONS: Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 5309.85 € 102.48 € 18 mm MK 2 240 mm 30 - 3000 U/min Iedjynmz Aopfx Apnjib 0.75 kW M12 (steigungsabhängig) 705 mm 355 mm 1825 mm 195 kg manuell mm/U 82 mm 180 - 870 mm 340 x 280 mm 100 mm Drilling capacity / normal drilling capacity 18/20 (in E335/ST60) Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob Manual feed EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS: Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, Year of construction: 2025, Heavy, solid cast iron design High running smoothness due to ground gear wheels running in an oil bath Right/left hand rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant device Machine lamp Gear head can be swivelled ± 60 Ijdpfx Ajg U Uv Ujpnsib Adjustable wedge bars Solid dovetail guide of the column, hand-scraped, for highest stability and greatest possible precision Height-adjustable, large-dimensioned protective disk with microswitch Drilling depth stop Digital position indicator DRO 5 Drilling / tapping function Massive and large dimensioned cross table, precisely surface machined with T-slots and adjustable taper bars Solid cast iron machine base with chip channel Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 min-1 due to 2 infinitely variable speeds Dimensions and weights Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm weight approx. 495 kg Drilling/milling capacity cutter head size max. 63 mm shank cutter size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Supply voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Horizontal milling table length 800 mm width 240 mm Distance vertical spindle - milling table max. 420 mm T-slots size 14 mm T-slots number 3 T-slots distance 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-A

Condition: good (used), Year of construction: 1995, Used radial drilling machine from Foradia Model: GR 50 1200 Iedsytb Eyjpfx Apneib Arm length: 1200 mm Drilling capacity up to: 50 mm Year of manufacture: 1995