Used Drying Chamber for sale (4,698)

Condition: used, Conveyorized chamber vacuum packaging machine for industrial food processing This VC999 K7B2 is a conveyorized chamber vacuum packaging machine, built by VC999 Verpackungssysteme in Switzerland, with a stainless steel, all-enclosed construction that avoids sharp edges and corners where dirt could collect. The machine runs two to three cycles per minute and features bi-active sealing bars with electronic temperature control and adjustable contact pressure, allowing secure sealing even with greasy or moist products. The B-version adds a perforation blade with bag waste suction on both sides, so trim is removed automatically during the cycle. Evacuation stops at the evaporation point, protecting product quality throughout the process. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Conveyorized chamber vacuum packaging machine (belt) Output: 2–3 cycles per minute Sealing: Bi-active sealing bars, electronic temperature control, adjustable contact pressure Trim removal: Perforation blade with bag waste suction on both sides (B-version) Vacuum control: Evacuation stops at the evaporation point Gkedpfjz Nc Nnox Akhsd Construction: Stainless steel, all-enclosed

Condition: used, axle configuration: 3 axles, first registration: 10/2012, color: other, Equipment: ABS, = Additional options and accessories = - Air suspension - Disc brakes = Remarks = LAG O-3-39 CD2, 2012, SAF axles with sliding brakes, LAGRAM dry materials stainless steel vacuum tank, 13450 Liters, Kipper = More information = Year of construction: 2012 Gedpfx Ajz R T S Eskhskd Tipper: Back Price: On request = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, Year of construction: 2007, Technical specifications: - Manufacturer: Venjakob - Model: VEN DRY - Year of manufacture: 2007 - Working height: 920 mm - Number of belt pallets: 6 - Belt pallets with conveyor belts - Pallet length: 6,450 mm - Usable length: approx. 6,200 mm - Inlet width: 1,400 mm - Dryer operates in continuous flow mode - Clearance between tiers: 75 mm - Heat requirement: approx. 137 kW - Hot water temperature: max. 70/60 degrees - Conveyor belt feed speed: 2–10 m/min - Temperature: max. 40 degrees - Air flow rate: 16,309 m³/h - Exhaust air flow rate: 2,400 m³/h - External dimensions: Length: 8,275 mm Width: 2,290 mm Godpsz A Utrofx Akhjkd Height: 2,560 mm Height: 3,380 mm including supply air unit - Volts/Hz: 400 V/50 Hz - Available: 08/2026

Condition: new, Year of construction: 2026, For sale: various nozzles from Nozzitec - COLD JET A quality. Also applicable to all COLD JET blasting machines. AERO 30 AERO 40 FP / HP AERO 75 DX AERO 80 FP We have all parts in stock for these machines. Please contact us. Gkedpfx Akjztkv Hohed Worldwide shipping. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: new, Year of construction: 2026, For sale: various nozzles from Nozzitec - COLD JET. Gsdpfx Ajztkw Rjkhskd A quality. These nozzles can also be used on all COLD JET MICROCLEAN blasting machines. We have all the parts in stock for these machines. Contact us. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: used, Year of construction: 2025, This is an external, dual-chamber water softening system manufactured by Hobart, model Hydroline Protect SD-H, year of manufacture 2025. The system has undergone a fresh inspection in our in-house workshop and is fully functional. The list price is €2,395 net / €2,850.05 gross. Our price: used, year of manufacture 2025: €1,290 net / €1,535 gross. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional – or your money back. Flexible shipping or self-collection options. Competent advice – before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Testing according to DGUV V3. Technical data: Dimensions: W x D x H: 360 x 360 x 585 mm Weight with/without packaging: 21/19 kg Maximum water hardness: 40°dH Salt tank capacity: 20 kg Salt consumption per regeneration: 0.5 kg Continuous flow rate: 2-20 L/min Temperature: min. 2 / max. 65°C Condition: used, inspected, fully functional. Customer benefits: Optimally protects all downstream machines from limescale - extends maintenance intervals and service life. Cost-effective, external water softening system. Compact dimensions, removable castors. No power connection required. The system is regenerated in parallel with the rinsing process. The water softening system provides softened water 24 hours a day. Godpfx Akozt Idnshokd Basic model: A high-quality ion exchanger removes the limescale-forming minerals from the water and adds water-soluble sodium salt in an exchange process. The total hardness of the raw water is thereby reduced to 0°dH. The water softening system consists of a pressure-resistant and corrosion-resistant tank. Tank material: plastic. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to change and errors. Do you have any questions, would you like advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday, 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 62401, functionality: fully functional, total length: 7,050 mm, total width: 2,550 mm, total height: 2,500 mm, overall weight: 3,400 kg, Dry wood chips, firewood and other coarse, wet biomass in a container that goes straight onto your truck, with warm air blown through the perforated floor. This Lauber TroCo drying container was built in 03/2026 and has been used only three times by us. It is in very good condition and ready to dry. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Best for: drying coarse, wet biomass such as wood chips, firewood and other coarse plant material, then moving the container to where you need it with a hooklift truck. Not suitable for: finely ground bulk material unless you verify it with us first. A warm air source and the air hose are not included, you need to supply them. What the specifications mean in practice: - 34 m3 volume - one large batch per drying cycle instead of many small ones - Hooklift system (locking dimension 3,890 mm) - load, move and unload with a standard hooklift truck, no crane needed on site - Perforated ventilation floor with round air connection at the door end - warm air is pushed up through the whole load, so it dries evenly - Fitted tarp cover - keeps rain out during storage and transport - Rear rollers and ladder steps on the front - easier to roll off and to inspect the load - Gross weight rating 21,000 kg - heavy loads are no problem for the frame Technical data (from the nameplate): - Manufacturer: Lauber Trocknungstechnik, type TroCo, serial no. 62401 - Year built: 03/2026 - Volume: 34 m3 - Length: 7,050 mm, height: 2,500 mm - Empty weight: 3,400 kg, permissible gross weight: 21,000 kg - Locking dimension: 3,890 mm - Colour: yellow - Safety inspection label (DGUV Rule 114-010) from the container builder is fitted, see nameplate photo Condition: Built 03/2026, used only three times by us, very good condition. Fully functional. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). A hooklift truck, a suitable forklift or a crane is needed for loading. The container weighs approx. 3,400 kg empty. Why you can buy with confidence: - Built 03/2026, used only three times - Used by us, not rented out - Nameplate photos available, in-person inspection in Kerns OW by appointment Inspect before you buy: you may verify identity, condition and completeness at inspection or pickup. We guarantee what we control: the machine is what this listing says it is. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Gjdpfx Asz I Dziskhjkd Why buy now: This is a single used unit. Once sold, it is gone. Inspection is available in Kerns OW by appointment. First-buyer bonus: buy within the next two weeks (until 20 October 2026) and we take CHF 500 off the price. Valid until 20 October 2026, or until the machine is sold. Action: Send us your intended material, batch size and destination. We will confirm suitability and give you a transport estimate.

Condition: used, Year of construction: 2015, Moretto OTX 360VP_drying hopper system (2015) Professional industrial drying hopper Moretto OTX 360VP designed for efficient pre-heating and drying of plastic granulates. Equipped with an integrated air Gkjdpfx Ake Af Na Hehod heater and suction valve, this compact unit ensures optimal moisture removal and consistent material flow prior to injection moulding or extrusion processes. Technical Specifications: 1. Manufacturer: Moretto S.p.A. (Italy) 2. Hopper Model: OTX 360VP 3. Serial Number: OP. Year of Manufacture: 2015 5. Hopper Capacity: 360 litres () 6. Dry Weight (Hopper): 133 kg Integrated Components: 1. Air Heater Unit: 2. Model: Moretto HG3V90X 3. Serial Number: 1515357 4. Heating Power: 3.1 kW 5. Voltage / Frequency: 230 V / 50–60 Hz 6. Heater Weight: 20 kg 7. Suction Valve: 8. Model: Moretto AVIC50 9. Serial Number: OP. Valve Weight: 3.12 kg

Condition: used, Year of construction: 2015, Moretto OTX 360VP_Moretto drying hopper system (2015) Professional industrial drying hopper Moretto OTX 360VP designed for efficient pre-heating and drying of plastic granulates. Equipped with an integrated air heater and suction valve, this compact unit ensures optimal moisture removal and consistent material flow prior to injection moulding or extrusion processes. Technical Specifications: Gksds Af Nd Aopfx Akhjd 1. Manufacturer: Moretto S.p.A. (Italy) 2. Hopper Model: OTX 360VP 3. Serial Number: OP. Year of Manufacture: 2015 5. Hopper Capacity: 360 litres () 6. Dry Weight (Hopper): 133 kg Integrated Components: 1. Air Heater Unit: 2. Model: Moretto HG3V90X 3. Serial Number: 1515357 4. Heating Power: 3.1 kW 5. Voltage / Frequency: 230 V / 50–60 Hz 6. Heater Weight: 20 kg 7. Suction Valve: 8. Model: Moretto AVIC50 9. Serial Number: OP. Valve Weight: 3.12 kg

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Gkodpfx Aksd I T Exohjd Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total width: 445 mm, total length: 550 mm, total height: 985 mm, air demand: 4 m³/h, overall weight: 65 kg, pressure: 10 bar, input voltage: 220 V, warranty duration: 12 months, operating pressure: 10 bar, input current: 2 A, hopper volume: 15 l, We offer this new KEERTEK dry ice blasting machine, manufactured in 2026. Gjdj Afnmwopfx Akhskd Model: ICE-JET 15 Blasting media: dry ice pellets 1.6mm - 3mm Dry ice hopper capacity: 15 Kg Dry ice consumption: 30-100 Kg/h Required inlet air flow: 1-4 m3/min Required inlet air pressure: 3-10 bar - The blasting machine includes an internal air system ventilation system. Power: 800 W Current: 2.5 A Voltage: 220 V Frequency: 50 Hz Weight: 65 kg Dimensions: 550x445x985 mm The package includes: - 5m air hose (3/4'') - 3.3m blasting hose (3/4'') - SET OF INTERCHANGEABLE NOZZLES: 1x soft plastic tube for delicate cleaning 1x stainless steel nozzle ø 6mm and 300mm length 1x aluminum nozzle ø 6mm and 150mm length 1x aluminum nozzle ø 8mm and 200mm length 1x aluminum flat nozzle with a 3mm x 8mm opening 1x aluminum flat nozzle with a 3mm x 19mm opening Delivery time: 1-4 weeks Shipping costs are not included in the price! If you have any questions or need further information, please feel free to send us a message or contact us by phone.

Condition: good (used), Year of construction: 2013, Drying and stoving oven TRO Model I, 60x90 for fixing and drying textile inks, flock adhesives and baking sheet metal and aluminum signs, suitable for inserting drying racks with 50 grids, loading area 60 x 90 cm, good heat insulation, easy loading, temperature control via actual and setpoint thermostat, with overheating protection, usable space dimensions: approx. 108 cm wide x 78 cm deep x 166 cm high, external dimensions approx. 192 cm wide x 128 cm deep x 230 cm high, approved for paints and solvents up to hazard class A II, fixing and drying temperature: up to max. 180°C, not suitable for drying food, connection: 400V, 50Hz, 21kW, weight: approx. 685 kg. Used, year of construction 2013, good condition. Gksdper Izh Usfx Akhod

Year of construction: 2014, condition: new, machine/vehicle number: RE-HU-2014-1603-2, Filter plate specification: 390x390 mm Filtering area 2.8m2 Number of filter plate 14pcs of chamber plate including one tail plate and one head plate Filtering pressure 0.6-1.6Mpa Thickness of filter cake 25mm Filtering chamber volume 35L Gsdpob Dluyjfx Akhjkd Filtrate discharge Open type outlet Construction material for framework Main material for framework is SS 316. carbon steel. Contact parts in PVC or SS. Material of filter plate Material for chamber plate is PP Working temperature <90 ℃ Overall dimension 1695X750X630mm Weight 610KG Buy or rent: Additional information: Please order before please, because the demand is very high.

Condition: used, Used Chamber Filter Plates Gedpfsbppvysx Akhjkd PP 1000 x 1000

Condition: used, Used Membrane Chamber Filter Plates Gkodpsbppv Dofx Akhsd 1000 x 1000 PP approx. 190 on stock

Condition: used, Used Chamber Filter Press / Filter Press Rittershaus & Blecher R&B 800 x 800 Effective length: 3500 Number of chambers: 64 Filterpressure: 16 Bar Closed Pressure: min. 300 Bar, max. 320 Bar Filter surface per chamber: ca. 0,97 m² Filter surface: ca. 62 m² Gedpebr Db Iefx Akhskd Volume of cake per chamber: ca. 11,19 Liter Volume of cake: ca. 716 Liter Plates: PP The machine is in good condition.

Condition: excellent (used), Year of construction: 2008, The new powerful dry-running pumps: The ADH series is specially designed for solar developed for the demanding processes of the semiconductor and LED markets, With a suction capacity of 600-4500 m3/h. Semiconductors: High H2 pumping rate The performance of the ADH series brings the following advantages to the process: -ADL process performance: high pumping efficiency of light gases enables faster chamber emptying between process steps - Epitaxy and EUV: high pumping speed and high flow rate Tolerance meets the most demanding process specifications Adixen AD30K dry pump, high vacuum, AD 30 KL Manufacturer: Alcatel Adixen Type: AD30K.H Year of manufacture: 2008 Adixen AD100K.H Manufacturer: Alcatel Adixen Type: AD100K.H Year of manufacture: 2008 Vacuum pump: Manufacturer: AERZEN Type: GM 2000 CM-C Speed: 6000 rpm Voltage: 200-460 V Frequency (mineral oil/PFPE oil): 100 c/s Maximum suction capacity: 4035 m3/h Maximum speed: 5920 rpm Engine power S 1 / S 6: 9/5.6 kW Year of manufacture: 2008 Gkedpfx Akeikq Tyehod Weight: 345 kg Dry pump: Manufacturer: Adixen Type: BF ADP122 Year of manufacture: 2008 Power 1.5 kW Maximum suction capacity: 95 m3/h Maximum continuous inlet pressure: 50 mbar Maximum exhaust pressure: 1200 mbar Cooling water: 60 l/h Speed ​​(pump): 3000-3600 rpm Operating temperature of the pump: from 5 °C to 40 °C Inlet flange: DN 50 ISO-KF Exhaust flange: DN 40

Year of construction: 2021, condition: good (used), • Manufacturer: Weiss Technik GmbH • Model: HeatEvent F 60/90 (Basic Line) • Year of manufacture: 2021 • Maximum temperature: 220 °C • Usable volume: 324 liters • Internal dimensions (usable space): approx. 600 mm (W) x 900 mm (H) x 600 mm (D) • Control: Touchscreen interface • Safety standard: Compliant with DIN EN 1539 (drying of flammable materials) • Connection: 400 V (3~/N/PE AC 50 Hz) • Weight: approx. 350 kg Gedpfx As Agfinjkhekd

Condition: used, Plant: Chamber filter press used, on steel frame, semi-mobile Application: Sludge dewatering Design: R+B 1200/1200/125/30 head-guided Filter plate format: 1200x1200 Number of plates: approx. 125 Filter plates: PP Cake thickness: 30 mm Chamber volume: approx. 3.8 m3 Filter cloths: optionally available to suit the medium Filter pressure: approx. 15 bar Pump technology: optional on request Power connection: 400 Volt / 125 A (CEE) Weight: approx. 65 tons plus filter cake Chamber volume: approx. 3.8 m³ Polymer post-dosing pump: e.g. max. 1.5 m³/h - optional on request Gkjdpjrk Ebkefx Akhsd Polymer hand attachment: optional on request - available e.g. consisting of 2 agitator tanks with agitator approx. 2m³ Sludge conditioning tank: optional - by arrangement e.g. volume approx. 1.8 cbm Purchase or hire: Inspection of the systems by arrangement at our factory. Miscellaneous: Would you like to rent or buy this plant? Please contact us, we will be happy to help you.

Condition: used, Nema Corrosion Test Chamber for Salt Spray Tests Manufacturer: Nema Type: NSN 300 Rated voltage: 400 V Rated current: 11 A Compressed air: 8-10 bar Air consumption: 6 Nm³/h Humidifier: 0.5 l/h Water pressure: 2-8 bar Power consumption: 5.6 kW Salt solution: NaCl: 50 +- 5.6 kW External dimensions (W x D x H): 3200 x 1200 x 1900 mm Internal dimensions of the test chamber (W x D x H): 3100 x 1000 x 880 mm Gsdpfx Aeu Ecrxokhskd Weight: 390 kg More items in other sizes – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2006, Technical details: voltage: 380 V number of stations: 1 Stück total power requirement: ca. 2,0 kW weight of the machine approx.: 160 kg dimensions of machine: 0,85x0,85x1,0 m Vibratiory bowl feeder Washing unit (vibration technique) with heating: - applicable for cleaning of small parts - drum size 300mm, height 150mm - ejection automatically via screw guide - tank:560x460x280mm, filling approx. 60 liter, with filling display - equipped with rotary waste separator - table: 800x600mm, table height 640mm, catching basin 750x550mm Gkodpfx Akeu Nu Imjhsd *

Condition: excellent (used), Year of construction: 2019, 357 USED Refrigerator, proofer, freezer USK Ungemann, Viesmann. IMPORTANT: Can be placed outdoors under cover. TECHNICAL DATA: - Operating temperature range: -30°C to +20°C EXTERNAL DIMENSIONS (in cm): - height 281, - width 506, - length 275. INTERNAL DIMENSIONS (in cm): - height 200, Gkodpfxoyw Iz Ro Akhjd - width 452, - length 234. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: excellent (used), Year of construction: 2007, 358 USED Koma RDV Refrigerator, Proofing, and Freezer. IMPORTANT: Can be stored outdoors under cover. TECHNICAL DATA: - Operating temperature range: -12°C to +18°C EXTERNAL DIMENSIONS (in cm): - height 267, - width 257, - length 410. INTERNAL DIMENSIONS (in cm): - height 198, - width 210, - length 354. Gksdoyw Nccjpfx Akhjd The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: refurbished (used), Year of construction: 2010, machine/vehicle number: SN214289, functionality: fully functional, Completely overhauled, electrical system renewed including conversion to thyristor technology, as well as installation of new controllers! -Maximum temperature 260°C Gjdpeyxl Epofx Akhskd -Capacity 9000 liters -Nabertherm controller P 300 (9 programs, each with 40 segments) -HAS (High-Accuracy System), a highly accurate system for temperature control and documentation -Double door -Internal dimensions W x D x H 1500 x 3000 x 2000 mm -External dimensions W x D x H 2400 x 3860 x 2830 mm -Temperature limit selector -Thermocouple type K -Signal column -Access ramp, oven with bottom insulation, high temperature uniformity -Circulation rate 18000 m³/h -Power 93 kW -Documentation, CE -Electrically tested and with current DGUV test report The oven is calibrated according to DIN 17052 as of February 2025. This standard ensures that the temperature throughout the oven chamber is within defined tolerances. Suitable for applications such as heat treatment of metals or in additive manufacturing (3D printing) when processes that comply with standards are required. Inspection can be arranged at our warehouse at any time. We offer new and used industrial ovens, which we can also modify and expand according to customer requirements. Oven, furnaces, drying oven, industrial oven, drying cabinet, heat treatment oven, heat chamber, convection oven, chamber oven, heating oven, chamber convection oven, tempering oven, annealing oven, hardening oven.

Condition: used, This listing is for a Star Lab N2400-4002 Dry Bath System. Gksdpfx Ajxxzg Tjkhsd The unit is in full working condition and is ready for immediate release. The Star Lab Dry Bath System N2400-4002 is a dual block dry bath system designed for various laboratory applications. It is part of the Star Lab Dry Bath System series, which offers great value and convenience for users. Key Features: Dual Block System: The N2400-4002 features two blocks, allowing for simultaneous heating of multiple samples. Digital Microprocessor Controller: The system is controlled by a digital microprocessor, ensuring precise temperature control. Temperature Range: The system can operate at temperatures ranging from 5 °C above ambient to 150 °C. Temperature Accuracy: The temperature accuracy is ±0.2 °C, ensuring reliable results. Timer: The system features a timer that can be set from 0 to 999 minutes. Safety Device: The system is equipped with a leak-proof heating chamber, ensuring safe operation. Power Consumption: The system consumes 200 W of power. Dimensions: The system measures 200 mm x 298 mm x 80 mm (W x D x H). Weight: The system weighs 2.8 kg. Applications: Heating and boiling Restriction digests Denaturing DNA Melting agar Coagulation studies In situ hybridisation Hot Start thermocycler reactions