Used Edge Deburring Machine for sale (65,065)

Condition: new, Aceti edge milling machine Art.61 A stable, robust edge milling machine, for milling visible and welded edges. Chamfer adjustment by handwheel and scale. Table hardened, with clamp 500 mm long. Axial adjustment of the milling table for full utilization of ISO / DIN inserts. Suitable for all materials, including plastic, by using different inserts. Standard accessories : -Milling head completely equipped with 10 ISO inserts -Hardened axially adjustable guides -Bevel adjustment by handwheel with locking device -Angle adjustment by circular guide 15-45° - Table design with 4 rubber feet -Table design with 4 rubber feet technical data: Motor 400V 1,1 KW speed 2800 rpm milling table 500 x 100 mm Hsdpfxoiwxwto Acrol milling cutter 80 mm chamfer 0 - 6 mm angle 15 - 45 weight 35 kg incl. 10 pcs. indexable inserts SPUN 1203

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch Hedpfxey A I Sge Acrel - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: good (used), Year of construction: 1982, max. wheel diameter 600 mm gear width 500 mm max. module 15 min. module 1 total power requirement 2 kW weight of the machine ca. 2 t dimensions of the machine ca. 2x1,5x2 m The rounding of the teeth is obtained by coordinating alternative movement of the cutter and rotary movement of the piece. The alternative movement of the cutter is obtained by rotating a cam, shaped in order to obtain radius or cusp rounding. A series of 4 cams allows to work modululus from 1 and 16 included. An regulation device allows change the modulus between the minimum and maximum value of every cam. The rotation of the piece is controlled by a three-stage gear wheel which forms the dividing system. The piece lock and the movement of the rapid entry of the cutter to the piece is controlled by pneumatic servo devices. The practicality and rapidity of the equipment, as well as the wide range of profiles available on the cams and the ability to process internal gears, make the machine a universal machine suitable for machining small and large series. --> technical features Max module: 15 --> Max diameter: 600 mm --> Spindle/head speed: 1450 - 2100 - 2800 rpm --> Production output teeth per minute: 35 - 50 - 75 --> Motor output spindle: 2800 rpm - 1.5 HP --> Motor power piece rotation (self-braking): 1.5 HP --> Motor power automatic (self-braking): 0.35 HP --> Motor power cooling system: 0.25 HP --> Dimensions: 2000 x 1500 mm --> Total weight: 2000 kg Accessories Hjdpfowftuxox Acrel Cam x 5 Indexing wheels Tools Serial no. 152/0589/94 Machine with full enclosure Counter support

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Features and technical data: - Machine completely overhauled: - New Glue Jet 301 glue application system (top part 1 mm) - All units inspected - All milling cutters resharpened - All knives replaced - Feed speed: 10 - 18 m/min - Workpiece length: min. 160 mm - Workpiece width: min. 60 mm - Workpiece thickness: 8 - 60 mm - Edge thickness: 0.4 - 8 mm - Electrically adjustable feed motor: 400 V / 50 Hz, 2.2 kW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy saving function - Infeed fence 1350 mm, motorized adjustment - Jointing unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 jointing units for panel edge jointing - Diamond cutter, Ø 70 x 64 x 30 mm, Z2, left rotation for jointing unit - Diamond cutter, Ø 70 x 64 x 30 mm, Z2, right rotation for jointing unit - Edge feeder 1901 fully automatic - Glue application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - Granulate hopper - Pressure unit 1913 MOT - End trimming unit 1918 (60 mm) pneumatic - Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right rotation - Profile milling unit 1833 MOT4: Hsdowka Iispfx Acrjl - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2.5 mm, left rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2.5 mm, right rotation with CM technology - Scraper unit 1929 MOT2: - Carbide reversible knives for scraper holder R = 2.5 mm (2 pcs. required) - Flat scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short-term Location: 63934 Röllbach

Condition: new, Year of construction: 2025, working width 1500 mm Hjdpex H Tvfefx Acrel workpiece width - max. 0,5 - 50 mm dimensions 3300 x 1500 x 1800 mm feed stepless 0-4 m/min total power requirement 20,4 kW weight of the machine ca. 2800 kg The SBM-L G1S2 grinding and deburring machines were developed for double-sided deburring and edge rounding of workpieces in a single operation. LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts, and stamped parts. The L series is equipped with three units on the top and bottom . Workpieces made of stainless steel, steel, aluminum or non-ferrous metal can be processed on the top, bottom or both sides. Processing sheet metal on both sides and rounding edges in a single operation saves up to 60% in time. It is also possible to easily connect automation solutions or integrate the machine into production lines. The machine design ensures ergonomic working and a pleasant working environment without dirt, dust, or noise pollution. Consisting of: - SBM-L 1500 G1S2 evo grinding machine - 4x SBM 1500 grinding belts with P60 Co web - 2x SBM-L 1500 grinding belt L=4123 W=70 P80 Co - SBM-M/L 1500 sound insulation - LIServ 4.0 package evo - Camera set MP - Dry extraction DDE 3002 - Standard piping DDE 3002 The machine is available for immediate delivery from our warehouse in Niederlangen.

Year of construction: 2025, condition: new, working width 1000 mm workpiece width - max. 0,5 - 50 mm sandingbelt width -- mm weight of the machine ca. 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds the edges on the outer and inner contours of punched, laser, fine plasma or water jet cut workpieces with a thickness of up to 50 mm on both sides in just one operation. * Two sanding units, 1 each on the top and bottom, remove spatter and slight burrs on outside and inside edges of sheet metal. * A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. * Machining on both sides saves time-consuming turning of the workpieces and edit twice. * All pairs of aggregates can be switched on/off separately depending on the application as well as to be set. * Including Siemens S7 control: - Easy and comfortable operation through intuitive user interface Hedpfjuia Dqjx Acrsl - High operating security through 3 password-protected user levels - Integrated program memory - USB / RJ 45 interface for data exchange or connection of external Components (e.g. barcode scanner) - Direct entry of material thickness via touch panel - All axes automatically adjust to preselected material thickness - Standby position for deactivated aggregates - Service-friendly (e.g. plain text error messages) consisting of: - Grinding machine SBM-L 1000 G1S2 (kit) - 4x sanding belts SBM 1000 with bar P60 SiC - Sanding belt SBM-L 1000 L=3125 B=70 P80 Cubitron 2 784F - SBM-L tool wear compensation Siemens S7 - DDE 3002 dry suction - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Further detailed technical data on request. The machine is in stock Niederlangen available immediately.

Condition: used, functionality: unexamined, For internal and external radii 4 profile rails Hjdpfoyznthjx Acrsl Tilting table Table size approx. 600 x 650 mm

Year of construction: 1998, condition: good (used), functionality: fully functional, Edge milling machine, manufactured by IMAC year of construction 1998 . Model : CB 18 . Series : B20 Hsdpfx Acey A Hnmerjl .

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, OTT Tornado FÜ + PU SPS-compatible control with 7" TFT color touchscreen display CM-CombiMelt unit for EVA and PUR hot-melt adhesives Pre-milling unit – jointing Fully automatic roll magazine Fully automatic edge magazine Pneumatic flush trimming 0-3° Flush trimming – 12 mm Radius milling R-2, R-5 Bevel milling 0°/15°/30°/45° Corner rounding Radius scraper blade Surface scraper blade Soundproof enclosure with space extraction Cleaning set with 4-way spray system, fine buffing unit, and sliding agent spray equipment First delivery in 2006 Machine has been WORKSHOP TESTED and is in TOP CONDITION The gluing unit was recently fully serviced and wearing parts replaced Technical data: Edge thickness: 0.4 – 8 mm Panel thickness: 8 – 40 mm Minimum panel length: 150 mm Minimum panel width: 70 mm Feed speed: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm End trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Corner copying unit Scraper blade Buffing unit 3-way spraying system Total connected load: 17.5 kW Dimensions: Length: 6,180 mm Width: 1,770 mm Weight: 3,100 kg - Available immediately - Hsdjv Sm Hcjpfx Acrjl

Condition: good (used), Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling machine: with sliding carriage, maximum travel 500 mm -Depth adjustment: 0 - 6 mm -Drive: 0.5 kW -Adjustable speed: 1200 - 8000 rpm -Angle: 45° -Accessories: Widia milling head, diamond grinding wheel, vacuum cleaner -Dimensions: 490/870/H1150 mm Hsdpfx Aeyn N Ilecrjl -Weight: 106 kg

Condition: good (used), Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine Hedpfx Ajd Nzgvecrjl -Edge milling: 0 - 3 mm -Drive: 0.45 kW -Angle: adjustable -Dimensions: 485/345/H250 mm -Weight: 18.2 kg

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, used Timesavers Model 22-Series-900-WB - DEMONSTRATION MACHINE - The machine is powered up and can be inspected by appointment! Technical data: Year of manufacture: 2023 Max. working width: 900 mm Table opening: 1 - 125 mm Conveyor speed, frequency-controlled: 2.5 - 14 m/min Electrical: Conveyor motor, frequency-controlled: 1.5 kW Table adjustment motor: 0.37 kW Electrical connections: 400 V Frequency: 50 Hz Control voltage: 24 V Total power: 28 kW Compressed air: Required air pressure: 6 bar Total air consumption: 20 l/min Total dedusting capacity: Required extraction capacity at 100 mm WG: 3,000 m³/h Hjdpfsyu Tfhox Acrjl W Unit: Roller unit Contact roller assembly, Ø150 mm Contact roller rubber hardness 45° Shore Abrasive belt speed: 11 - 22 m/sec Abrasive belt size (L x W): 1,900 x 930 mm Total power W Unit: 15 kW B Unit: Brush unit Brush Ø200 mm Oscillation: 110 H/min Main motor: 11 kW Total power B Unit: 11 kW Machine version according to CE door switch Emergency stops at infeed and outfeed of machine Unpacked machine weight: 2,060 kg Dimensions (L x W x H): approx. 1700 x 2000 x 2400 mm

Condition: new, -Continuously adjustable sanding unit (0 - 90°) for vertical and horizontal sanding -Oscillating sanding belt for better sanding results and a longer service life of the sanding belt -Quick and easy sanding belt change via quick-clamping system -Grinding sole with graphite coating as standard for a longer service life of the sanding belt -Work table made of gray cast iron adjustable via handwheel with T-slot -Including side sanding sleeve device for sanding curves and radii -Two suction nozzles Ø 100 mm -1x sanding belt 2750x 150mm grain 80 -1x sanding sleeve Ø38mm grain 80 -1x sanding sleeve Ø50mm grain 80 -1x sanding sleeve Ø75mm grain 80 Dimensions and weights: - Length (product) approx.: 1515 mm - Width/depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg Extraction connection: - Extraction nozzle diameter: 100 mm Work table(s): - Work table length: 900 mm - Work table width: 305 mm - Work table height adjustment: 120 mm Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz Grinding unit: - Sanding belt length: 2750 mm - Sanding belt width: 150 mm - Belt rotation speed(s): 16 m/s - Oscillation stroke: 15 mm - Sanding surface length: 1010 mm - Sanding surface width: 190 mm - Sanding height max.: 170 mm - Sanding unit swivel: 0 – 90 ° Hodpfsvxkv Uox Acrel Workpiece: - Workpiece width max.: 1010 mm - Workpiece height max.: 150 mm - new exhibition machine -

Condition: new, Edge sanding machine HOLZKRAFT KSO 200 F - Exhibition machine - Relief rollers on the fence rulers, with swiveling sanding unit, and oscillating sanding belt, Hedpou R S Erofx Acrjl Veneer sanding device, Oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubberized sanding drum ----- Technical data ----- Sanding belt dimensions: 3,000 x 200 mm, Work table dimensions: 960 x 350 mm, Work table height adjustment: 230 mm, Sanding surface: 1,050 x 300 mm, Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Suction nozzle Ø: 140 mm, Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Weight: 290 kg - new exhibition machine -

Condition: used, Year of construction: 1989, Used machine Compact machine for processing molded parts Processes edge material coated with hot-melt adhesive, which is reactivated by hot air Automatic workpiece feed is achieved by pressing the workpiece against the central, driven pressure roller, ensuring uniform adhesive reactivation and consistent bonding reliability Thermostatic temperature control via analog thermostat Maintenance-free three-phase hot air blower for continuous operation Automatic airflow redirection Pneumatically operated roller separating device cuts even the toughest veneer and PVC edges Foot switch for molded part processing Workpiece thickness: 10 - 50 mm Heating output: 3 kW Connection load: 3.3 kW Minimum workpiece width: approx. 25 mm Edge thickness: approx. 0.5 - 1 mm Minimum internal radius: approx. 25 mm Feed rate: 4 m/min Pneumatic system: 6 bar Weight: approx. 105 kg Availability: short-term Hjdpfxowwxykj Acrol Location: Röllbach

Condition: used, workpiece height 20-90 mm device 1: Schleifaggragat device 2: Fräsaggregat device 3: Profilschleifaggregat Automatic edge processing machine Rehnen type KBA for the automatic processing and rounding of edges on wood and panel materials. The machine is suitable for precise sanding, deburring and rounding of workpiece edges and enables a consistently high surface quality. Ideal for joineries, furniture making and industrial woodworking. Includes replacement sanding belts and cutters. Unit 1: Sanding unit, oscillating Hodpfxeyb Sdcj Acrel Unit 2: Milling unit, top and bottom Unit 3: Profile sanding unit Accessories: For edges R5

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Table size: 750 x 300 mm Abrasive belt dimensions: 2600 x 150 mm Belt back panel: 850 x 200 mm Belt speed: 20 m/sec. Table stroke up to 200 mm Motor: 3.0 kW Oscillation motor: 0.25 kW Extraction connection: 100 mm Oscillation drive with geared motor Height-adjustable cast iron table with double column guide Hjdpfx Aceyulfaorsl Sanding unit infinitely tiltable up to 45° Dimensions (LxWxH): approx. 1720 x 760 x 1160 mm Net weight: approx. 180 kg Availability: short notice Warehouse location: Flörsheim

Condition: used, Year of construction: 2008, operating hours: 1,019 h, functionality: fully functional, machine/vehicle number: 93.437.268, working width: 1,350 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 7,085 mm, total width: 2,020 mm, total height: 2,295 mm, overall weight: 4,800 kg, working height: 850 mm, input voltage: 400 V, compressed air connection: 6 bar, input frequency: 50 Hz, power: 55 kW (74.78 HP), table height: 850 mm, grinding width: 1,350 mm, input current: 100 A, Equipment: documentation/manual, For sale is a reliable Weber NLC 1350 wet grinding machine from 2008. This machine is specifically designed for high-quality surface finishing of laser-cut, punched, and nibble parts. Thanks to wet grinding technology, excessive material heating is prevented, ensuring consistent results with high precision. Hodpfx Acjy Ar A Norjl Highlights & Features: Precision: Consistent working height and robust modular construction. Versatility: Suitable for deburring, edge rounding, and descaling of both thin and thick sheet metal. Safety: Wet grinding binds grinding dust and increases safety in the production process. Control System: Intuitive user interface for rapid changeover. If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2022, operating hours: 300 h, functionality: fully functional, Description see PDF file. Very little used, like new. Detailed description in the attachment. Hedpsw I S Nrjfx Acrol

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: SN061856, 12-month warranty Hsdpfx Aey Ar Dgjcrsl

Condition: new, Year of construction: 2023, functionality: fully functional, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 102 mm, total length: 2,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 4,000 kg, working height: 950 mm, workpiece length (max.): 102 mm, Deburring on both sides in just one pass - of course with 100% reproducible results and precise processing of the inside and outside edges - only the EdgeRacer 1500 D offers you this. Hedpfxeucw Rbe Acrjl The double-sided deburring EdgeRacer 1500 D is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with beads, notches, thread pull-throughs and the like. The maximum component height is 102 mm. The infeed of the brushes working from above and below can be set independently of each other. Thanks to the roller conveyor, the infeed can also be below or above roller table level.

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Equipment: Hedpfxjytkiuo Acrel - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber cover. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with glue reservoir from below and fast heat-up time after machine downtime - Flush-trimming unit for workpiece front and rear edge, automatic scanning on the workpiece, pneumatic trimming with blade for cuttable edges - Flush-milling unit with vertical tracking and horizontal guidance, reproducible settings via digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4,000 to 18,000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film disc Ø 800 mm Technical details: - Minimum workpiece width approx. 80 mm - Workpiece thickness 10 – 50 mm - Minimum workpiece length approx. 220 mm - Edge thickness 0.4 – 2.0 mm - Roller separation max. 1.0 x 55 mm, 2 x 45 mm - Heating capacity glue pot 2.7 kW - Electrical connection 400 V, 50 Hz, 3Ph + N - Total connected load 3.8 kW - Heat-up time approx. 10 minutes - Pneumatic connection 6 bar - Working height approx. 880 mm - Dimensions approx. 1800 x 700 x 1300 mm without film disc Ø 800 - Net weight approx. 260 kg Availability: short notice Location: Flörsheim

Condition: ready for operation (used), A fully automatic edge polishing machine (bullnose) C.M.G. for grinding marble, granite, natural stone, quartz and ceramic is available. Edges: straight/toroidal/chamfers, chamfer units: 2+2, spindles: 8, calibrating wheel diameter: 200mm, cutting disc diameter: 300mm, tool diameter: 130mm, workpiece thickness range: 20mm-100mm, conveyor speed: 2300mm/min, machine dimensions: approx. 7000mm/1800mm/1900mm, weight: approx. 5100kg. The machine has not been in operation for at least 5 years and must be inspected. An on-site inspection is possible. Hedpfoyypmmox Acrjl

Condition: ready for operation (used), functionality: fully functional, power: 11 kW (14.96 HP), workpiece width (max.): 70 mm, overall weight: 800 kg, working height: 870 mm, Technical data: max. edge thickness: 5mm / 8mm max. workpiece height: approx. 40mm / 50mm min. workpiece height: approx. 250mm / 300mm min. Workpiece width: approx. 70mm Feed speed: approx. 11m/min Ready for operation: approx. 4.5 min Power consumption: approx. 11kW Electrical connection: 230/400V / 50/60 Hz Work table height: 870mm Dimensions (LxWxH): 4100x1400x1300mm Condition and details see pictures Hsdpjug Uqasfx Acrjl

Condition: good (used), functionality: fully functional, overall weight: 95 kg, power: 2.25 kW (3.06 HP), Oscillating sanding belt, height-adjustable work table, adapter for dust extraction (diameter 120mm), aluminum work table, sanding unit infinitely tiltable from 0° to 90°. BG wood dust tested. Technical data: Voltage 400V, 50/60 Hz Belt motor power: 2.25 kW Hodpfeug Uynjx Acrjl Motor speed: 3400 rpm Belt speed: 20m/sec Work table: 620x220mm Belt dimensions: 2250x150mm Weight: 95kg